https://docs.hubitat.com/api.php?action=feedcontributions&feedformat=atom&user=DougHubitat Documentation - User contributions [en]2026-04-30T00:57:46ZUser contributionsMediaWiki 1.31.0https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5200Amazon Echo Skill2021-08-18T19:03:21Z<p>Doug: /* Manually adding Amazon Echo Skill app to your hub */</p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
<big>'''<span style="color: red;;">IMPORTANT:</span>''' If you have the former '''Amazon Echo''' app installed on your hub, you '''MUST''' remove it from your hub before adding the '''Amazon Alexa Skill for Hubitat''' before you install the '''Amazon Echo Skill''' app.</big><br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<big>You can add the Amazon Echo Skill app to your hub to control devices by voice. Just say '''''"Alexa, add the Hubitat Skill"'''''. If adding the Amazon Skill for Hubitat to your Amazon account by voice should fail, follow the steps [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Manually_activating_the_Hubitat_Skill_for_Alexa under '''Manually activating the Hubitat Skill for Alexa'''], otherwise you may skip ahead to '''[https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&oldid=5191#Adding_additional_devices_or_Removing_devices_from_Alexa Adding additional devices or Removing devices from Alexa]'''</big>.<br />
<br />
<br />
===<big>Manually activating the Hubitat Skill for Alexa</big>===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app is capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Manually adding Amazon Echo Skill app to your hub</big>===<br />
<big>The '''Amazon Echo Skill''' app allows Amazon Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub by voice. From your Alexa device, just say '''''"Alexa, add the Hubitat Skill"''''' and the '''Amazon Echo Skill''' app will also be automatically installed on your hub. If you need to manually add the '''Alexa Hubitat Skil'''l for your Echo device, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa'''].</big> <br />
<br />
*<big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. Adding the '''Alexa Hubitat Skill''' to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub. It is a requirement that the '''Amazon Echo Skill''' app is also installed on your hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps.</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors.'''</big><br />
#*'''<big>NOTE</big>'''<big>: ''If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.''</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#<big>Press the '''Discover Devices''' button.</big>[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5199Amazon Echo Skill2021-08-18T18:52:40Z<p>Doug: /* Manually adding Amazon Echo Skill app to your hub */</p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
<big>'''<span style="color: red;;">IMPORTANT:</span>''' If you have the former '''Amazon Echo App''' installed on your hub, you MUST remove it from your hub before adding the '''Amazon Alexa Skill for Hubitat''' before you install the '''Amazon Echo Skill''' app.</big><br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<big>You can add the Amazon Echo Skill app to your hub to control devices by voice. Just say '''''"Alexa, add the Hubitat Skill"'''''. If adding the Amazon Skill for Hubitat to your Amazon account by voice should fail, follow the steps [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Manually_activating_the_Hubitat_Skill_for_Alexa under '''Manually activating the Hubitat Skill for Alexa'''], otherwise you may skip ahead to '''[https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&oldid=5191#Adding_additional_devices_or_Removing_devices_from_Alexa Adding additional devices or Removing devices from Alexa]'''</big>.<br />
<br />
<br />
===<big>Manually activating the Hubitat Skill for Alexa</big>===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app and Amazon Echo App are capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Manually adding Amazon Echo Skill app to your hub</big>===<br />
<big>The '''Amazon Echo Skill''' app allows Amazon Alexa to control devices by voice. From your Alexa device, just say "Alexa, add the Hubitat Skill" and the '''Amazon Echo Skill''' app will also be automatically installed on your hub. If you need to manually add the '''Alexa Hubitat Skil'''l for your Echo device, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa'''].</big> <br />
<br />
*<big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. Adding the '''Alexa Hubitat Skill''' to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub. It is a requirement that the '''Amazon Echo Skill''' app is also installed on your hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps.</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors.'''</big><br />
#*'''<big>NOTE</big>'''<big>: ''If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.''</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#<big>Press the '''Discover Devices''' button.</big>[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5198Amazon Echo Skill2021-08-18T18:46:57Z<p>Doug: /* Activating the Hubitat Skill for Alexa */</p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
<big>'''<span style="color: red;;">IMPORTANT:</span>''' If you have the former '''Amazon Echo App''' installed on your hub, you MUST remove it from your hub before adding the '''Amazon Alexa Skill for Hubitat''' before you install the '''Amazon Echo Skill''' app.</big><br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<big>You can add the Amazon Echo Skill app to your hub to control devices by voice. Just say '''''"Alexa, add the Hubitat Skill"'''''. If adding the Amazon Skill for Hubitat to your Amazon account by voice should fail, follow the steps [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Manually_activating_the_Hubitat_Skill_for_Alexa under '''Manually activating the Hubitat Skill for Alexa'''], otherwise you may skip ahead to '''[https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&oldid=5191#Adding_additional_devices_or_Removing_devices_from_Alexa Adding additional devices or Removing devices from Alexa]'''</big>.<br />
<br />
<br />
===<big>Manually activating the Hubitat Skill for Alexa</big>===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app and Amazon Echo App are capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Manually adding Amazon Echo Skill app to your hub</big>===<br />
<big>You can add the '''Amazon Echo Skill''' app to your hub to control devices by voice. Just say "Alexa, add the Hubitat Skill". If you need to manually add the Alexa Hubitat Skill, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa''']. Once the Alexa Hubitat Skill is added to your Amazon account, follow the steps under '''Amazon Echo Skill''' app to enable your hub to communicate with Alexa.</big><br />
<br />
*<big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. Adding the Alexa Hubitat Skill to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub. It is a requirement that the '''Amazon Echo Skill''' app is also installed on your hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps.</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors.'''</big><br />
#*'''<big>NOTE</big>'''<big>: ''If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.''</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#<big>Press the '''Discover Devices''' button.</big>[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5197Amazon Echo Skill2021-08-18T18:45:30Z<p>Doug: /* Activating the Hubitat Skill for Alexa */</p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
<big>'''<span style="color: red;;">IMPORTANT:</span>''' If you have the former '''Amazon Echo App''' installed on your hub, you MUST remove it from your hub before adding the '''Amazon Alexa Skill for Hubitat''' before you install the '''Amazon Echo Skill''' app.</big><br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<big>You can add the Amazon Echo Skill app to your hub to control devices by voice. Just say '''''"Alexa, add the Hubitat Skill"'''''. If adding the Amazon Skill for Hubitat to your Amazon account by voice should fail, follow the steps Manually activating the Hubitat Skill, otherwise you may skip ahead to '''[https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&oldid=5191#Adding_additional_devices_or_Removing_devices_from_Alexa Adding additional devices or Removing devices from Alexa]'''</big>.<br />
<br />
<br />
===<big>Manually activating the Hubitat Skill for Alexa</big>===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app and Amazon Echo App are capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Manually adding Amazon Echo Skill app to your hub</big>===<br />
<big>You can add the '''Amazon Echo Skill''' app to your hub to control devices by voice. Just say "Alexa, add the Hubitat Skill". If you need to manually add the Alexa Hubitat Skill, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa''']. Once the Alexa Hubitat Skill is added to your Amazon account, follow the steps under '''Amazon Echo Skill''' app to enable your hub to communicate with Alexa.</big><br />
<br />
*<big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. Adding the Alexa Hubitat Skill to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub. It is a requirement that the '''Amazon Echo Skill''' app is also installed on your hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps.</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors.'''</big><br />
#*'''<big>NOTE</big>'''<big>: ''If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.''</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#<big>Press the '''Discover Devices''' button.</big>[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5196Amazon Echo Skill2021-08-18T18:42:16Z<p>Doug: /* Adding the Amazon Echo Skill to Hubitat Elevation® */</p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
<big>'''<span style="color: red;;">IMPORTANT:</span>''' If you have the former '''Amazon Echo App''' installed on your hub, you MUST remove it from your hub before adding the '''Amazon Alexa Skill for Hubitat''' before you install the '''Amazon Echo Skill''' app.</big><br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<big>You can add the Amazon Echo Skill app to your hub to control devices by voice. Just say '''''"Alexa, add the Hubitat Skill"'''''. If adding the Amazon Skill for Hubitat to your Amazon account by voice should fail, follow the steps in the next section add it manually, otherwise you may skip ahead to '''[https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&oldid=5191#Adding_additional_devices_or_Removing_devices_from_Alexa Adding additional devices or Removing devices from Alexa]'''</big>.<br />
<br />
<br />
===<big>Manually activating the Hubitat Skill for Alexa</big>===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app and Amazon Echo App are capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Manually adding Amazon Echo Skill app to your hub</big>===<br />
<big>You can add the '''Amazon Echo Skill''' app to your hub to control devices by voice. Just say "Alexa, add the Hubitat Skill". If you need to manually add the Alexa Hubitat Skill, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa''']. Once the Alexa Hubitat Skill is added to your Amazon account, follow the steps under '''Amazon Echo Skill''' app to enable your hub to communicate with Alexa.</big><br />
<br />
*<big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. Adding the Alexa Hubitat Skill to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub. It is a requirement that the '''Amazon Echo Skill''' app is also installed on your hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps.</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors.'''</big><br />
#*'''<big>NOTE</big>'''<big>: ''If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.''</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#<big>Press the '''Discover Devices''' button.</big>[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5195Amazon Echo Skill2021-08-18T18:36:56Z<p>Doug: /* Adding the Amazon Echo Skill to Hubitat Elevation® */</p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
<big>'''<span style="color: red;;">IMPORTANT:</span>''' If you have the former '''Amazon Echo App''' installed on your hub, you MUST remove it from your hub before adding the '''Amazon Alexa Skill for Hubitat''' before you install the '''Amazon Echo Skill''' app.</big><br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<big>You can add the Amazon Echo Skill app to your hub to control devices by voice. Just say '''''"Alexa, add the Hubitat Skill"'''''. If adding the Amazon Skill for Hubitat to your Amazon account by voice should fail, follow the steps in the next section add it manually, otherwise you may skip ahead to '''[https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&oldid=5191#Adding_additional_devices_or_Removing_devices_from_Alexa Adding additional devices or Removing devices from Alexa]'''</big>.<br />
<br />
<br />
===<big>Manually activating the Hubitat Skill for Alexa</big>===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app and Amazon Echo App are capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Adding the Amazon Echo Skill to Hubitat Elevation<sup>®</sup></big>===<br />
<big>You can add the '''Amazon Echo Skill''' app to your hub to control devices by voice. Just say "Alexa, add the Hubitat Skill". If you need to manually add the Alexa Hubitat Skill, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa''']. Once the Alexa Hubitat Skill is added to your Amazon account, follow the steps under '''Amazon Echo Skill''' app to enable your hub to communicate with Alexa.</big><br />
<br />
*<big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. Adding the Alexa Hubitat Skill to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub. It is a requirement that the '''Amazon Echo Skill''' app is also installed on your hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps.</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors.'''</big><br />
#*'''<big>NOTE</big>'''<big>: ''If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.''</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#<big>Press the '''Discover Devices''' button.</big>[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5194Amazon Echo Skill2021-08-18T18:32:33Z<p>Doug: </p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
<big>'''<span style="color: red;;">IMPORTANT:</span>''' If you have the former '''Amazon Echo App''' installed on your hub, you MUST remove it from your hub before adding the '''Amazon Alexa Skill for Hubitat''' before you install the '''Amazon Echo Skill''' app.</big><br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<big>You can add the Amazon Echo Skill app to your hub to control devices by voice. Just say '''''"Alexa, add the Hubitat Skill"'''''. If adding the Amazon Skill for Hubitat to your Amazon account by voice should fail, follow the steps in the next section add it manually, otherwise you may skip ahead to '''[https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&oldid=5191#Adding_additional_devices_or_Removing_devices_from_Alexa Adding additional devices or Removing devices from Alexa]'''</big>.<br />
<br />
<br />
<br />
=== <big>Manually activating the Hubitat Skill for Alexa</big> ===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app and Amazon Echo App are capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Adding the Amazon Echo Skill to Hubitat Elevation<sup>®</sup></big>===<br />
<big>You can add the '''Amazon Echo Skill''' app to your hub to control devices by voice. Just say "Alexa, add the Hubitat Skill". If you need to manually add the Alexa Hubitat Skill, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa''']. Once the Alexa Hubitat Skill is added to your Amazon account, follow the steps under '''Amazon Echo Skill''' app to enable your hub to communicate with Alexa.</big><br />
<br />
*<big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. The '''Amazon Echo Skill''' must be installed on your hub manually. Adding the Alexa Hubitat Skill to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps.</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors.'''</big><br />
#*'''<big>NOTE</big>'''<big>: ''If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.''</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#<big>Press the '''Discover Devices''' button.</big>[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Elevation_Documentation&diff=5193Hubitat Elevation Documentation2021-08-18T16:57:37Z<p>Doug: /* App Documentation */</p>
<hr />
<div><br />
==[[Getting Started|<big>Getting Started</big>]]==<br />
<br />
#[[Registration and setup|<u>'''<big>Registration and setup</big>'''</u>]]<br />
#[[Navigating the hub interface|<big>Navigating the hub interface</big>]]<br />
#[[Discovering your Devices|<big>Discovering your Devices</big>]]<br />
#[[Automating your Devices|<big>Automating your Devices</big>]]<br />
#[[Care and Maintenance|<big>Care and Maintenance</big>]]<br />
#[[How to Collect Information for Support|<big>Support</big>]]<br />
<br />
==<big>Subscription Services</big>==<br />
<br />
*[[Hub Protect|<big>Hub Protect</big>]]<br />
*[[Remote Admin|<big>Remote Admin</big>]]<br />
<br />
==<big>Hubitat Elevation User Interface</big>==<br />
<br />
'''<big>Main Menu</big>'''<br />
<br />
*'''<big>[[Home]]</big>'''<br />
*[[Location and Modes|'''<big>Location and Modes</big>''']]<br />
*'''<big>[[Devices]]</big>'''<br />
**[[Device Discovery|<big>Device Discovery</big>]]<br />
**[[Device Detail|<big>Device Detail</big>]]<br />
**[[Device Events|<big>Device Events</big>]]<br />
*'''<big>[[Apps]]</big>''' <br />
**[[App Status|<big>App Status</big>]]<br />
**[[App Events|<big>App Events</big>]]<br />
*'''<big>[[Settings]]</big>'''<br />
**[[Hub Details|<big>Hub Details</big>]]<br />
**[[Hub Login Security|<big>Hub Login Security</big>]]<br />
**[[Location and Modes|<big>Location and Modes</big>]]<br />
**[[Z-Wave Details|<big>Z-Wave Details</big>]]<br />
**[[Zigbee Details|<big>Zigbee Details</big>]]<br />
***[[Zigbee Logs|<big>Zigbee Logs</big>]]<br />
**[[Check For Updates|<big>Check For Updates</big>]]<br />
**[[File Manager|<big>File Manager</big>]]<br />
**[[Backup and Restore|<big>Backup and Restore</big>]]<br />
**[[Discover Zigbee and Z-Wave Devices|<big>Discover Zigbee and Z-Wave Devices</big>]]<br />
**[[Hub Mesh|<big>Hub Mesh</big>]]<br />
**<big>[[Networking]]</big><br />
<br />
'''<big>Advanced Features</big>'''<br />
<br />
*[[Apps Code|<big>Apps Code</big>]]<br />
*[[Drivers Code|<big>Drivers Code</big>]]<br />
*[[System Events|<big>System Events</big>]]<br />
**[[Hub Events|<big>Hub Events</big>]]<br />
**[[Location Events|<big>Location Events</big>]]<br />
*<big>[[Logs]]</big><br />
**[[Past Logs|<big>Past Logs</big>]]<br />
*[[Hubitat Diagnostic Tool|<big>Hubitat Diagnostic Tool</big>]]<br />
*[[Soft Reset|<big>Soft Reset</big>]]<br />
<br />
==<big>App Documentation</big>==<br />
<br />
*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*<big>[[Basic Rules]]</big><br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-5.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Zone Motion Controllers|<big>Zone Motion Controllers</big>]]<br />
*[[Z-Wave Poller|<big>Z-Wave Poller</big>]]<br />
<br />
==<big>Device Documentation</big>==<br />
<br />
*[[Orbit Hose Water Timer|<big>Orbit Hose Water Timer</big>]]<br />
<br />
*<big>[[Pushover]]</big><br />
<br />
*<big>[[SecurityKeypads]]</big><br />
<br />
*[[Twilio Notification|<big>Twilio Notification</big>]]<br />
<br />
==<big>Compatible Devices</big>==<br />
<br />
[[List of Compatible Devices|'''<big>List of Compatible Devices</big>''']]<br />
<br />
[[Join and Reset Instructions|<big>Join and Reset Instructions</big>]]<br />
<br />
==<big>How-to Guides</big>==<br />
<br />
[[Hub Placement Tips|<big>Hub Placement Tips</big>]]<br />
<br />
[[How to collect information for support|<big>How to collect information for support</big>]]<br />
<br />
[[How to cancel subscription services|<big>How to cancel subscription services</big>]]<br />
<br />
[[How to Build a Solid Zigbee Mesh|<big>How to Build a Solid Zigbee Mesh</big>]]<br />
<br />
[[How to Build a Solid Z-Wave Mesh|<big>How to Build a Solid Z-Wave™ Mesh</big>]]<br />
<br />
[[How to remove a Z-Wave device|<big>How to remove a Z-Wave™ device</big>]]<br />
<br />
[[The Anatomy of Z-Wave™ Repair|<big>The Anatomy of Z-Wave™ Repair</big>]]<br />
<br />
[[How to update your hub|<big>How to update your hub</big>]]<br />
<br />
[[How to backup your hub|<big>How to backup your hub</big>]]<br />
<br />
[[How to change your location|<big>How to change your location</big>]]<br />
<br />
[[How to add/change a mode|<big>How to add/change a mode</big>]]<br />
<br />
[[How to Install Custom Apps|<big>How to Install Custom Apps</big>]]<br />
<br />
[[How to Install Custom Drivers|<big>How to Install Custom Drivers</big>]]<br />
<br />
[[Hub Login Security|<big>How to add password protection</big>]]<br />
<br />
[[How to Manage Lock Codes|<big>How to Manage Lock Codes</big>]]<br />
<br />
<big>[[How to create new presence and push notification devices]]</big><br />
<br />
<big>[[How to setup mobile presence sensing]]</big><br />
<br />
[[How to manage accounts linked to your hub|<big>How to manage accounts linked to your hub</big>]]<br />
<br />
[[How to correct a Multi Admin error|<big>How to correct a Multi Admin error</big>]]<br />
<br />
[[How to disable Hub Login Security to recover access|<big>How to disable Hub Login Security to recover access</big>]]<br />
<br />
[[How to use Dashboard to Manage Lock Codes|<big>How to use Dashboard to Manage Lock Codes</big>]]<br />
<br />
==<big>Compliance Documentation</big>==<br />
<br />
[[Z-Wave Manual|'''<big>Z-Wave User Manual</big>''']]<br />
<br />
==<big>Developer Documentation</big>==<br />
<br />
[[Developer Documentation|<big>Developer Documentation</big>]]<br />
<br />
[[Driver Capability List|<big>Driver Capability List</big>]]<br />
<br />
==<big>Platform</big>==<br />
[[Release Notes|'''<big>Release Notes</big>''']]<br />
<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=App_Documentation&diff=5192App Documentation2021-08-18T16:56:45Z<p>Doug: </p>
<hr />
<div>*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*[[Basic Rules|<big>Basic Rules</big>]]<br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration&action=edit&redlink=1|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-5.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Thermostat Scheduler|<big>Thermostat Scheduler]]<br />
*[[Zone Motion Controllers|Zone Motion Controllers]]<br />
*[[Z-Wave Poller]]<br />
<br />
[[File:Doc Card Document List.png|frameless|alt=Go to the full document list|link=Hubitat_Elevation_Documentation]]<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=Amazon_Echo_Skill&diff=5191Amazon Echo Skill2021-08-18T16:55:51Z<p>Doug: /* Adding the Amazon Echo Skill to Hubitat Elevation® */</p>
<hr />
<div>{{Top}}<br />
<br />
<big>Connecting your Hubitat Elevation to your Amazon Echo or Alexa compatible device is an easy way to add voice control to your home automations. Using the Hubitat ''Amazon Echo Skill'' app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. You will need to own an Amazon Echo or an Alexa compatible device, and the Hubitat Skill for Alexa must also be added by using the Alexa app on your mobile device or alexa.amazon.com</big><br />
<br />
<big>'''NOTE:''' This integration allows Alexa to control switches, dimmers, door locks, fan controllers, garage door controllers, shade controllers, thermostat devices, contact and motion sensors that have been joined to your Hubitat Elevation hub, but the reverse is not possible. Devices that have been added directly to via the Alexa app cannot be shared with your Hubitat Elevation hub.</big><br />
<br />
===<big>Adding the Amazon Echo Skill to Hubitat Elevation<sup>®</sup></big>===<br />
<big>You can add the '''Amazon Echo Skill''' app to your hub to control devices by voice. Just say "Alexa, add the Hubitat Skill". If you need to manually add the Alexa Hubitat Skill, follow steps under [https://docs.hubitat.com/index.php?title=Amazon_Echo_Skill#Activating_the_Hubitat_Skill_for_Alexa '''Activating the Hubitat Skill for Alexa''']. Once the Alexa Hubitat Skill is added to your Amazon account, follow the steps under '''Amazon Echo Skill''' app to enable your hub to communicate with Alexa.</big><br />
<br />
* <big>'''NOTE:''' '''Amazon Echo Skill''' is the name of the Hubitat app that works in conjunction with the Amazon '''Alexa Hubitat Skill''' on your Amazon Echo device. The '''Amazon Echo Skill''' must be installed on your hub manually. Adding the Alexa Hubitat Skill to your Amazon account alone is only half of what is required to allow Alexa to control devices on your Hubitat Elevation<sup>®</sup> hub.</big><br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Amazon Echo Skill''' from the list of Built-In Apps</big>[[File:Install Amazon Echo Skill 3.0.png|none|thumb|600x600px]]<br />
#<big>Select the devices you want the Alexa Skill to have access to. You do not have to do this now, since will be asked again when authorizing the Alexa Hubitat Skill as explained in the next section. The Amazon Echo Skill app allows you to control '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''.</big>[[File:Amazon Echo Skill setting for Hue Devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/86/Amazon_Echo_Skill_setting_for_Hue_Devices.png ]]''<big>'''NOTE''': If you want your Hubitat Hue Integration devices to be controllable from Alexa, disable the option to allow Alexa to discover them. This will allow you to choose which Hue devices and groups are made available to Alexa. You should disable your Philips Hue Skill for Alexa, otherwise you will get duplicate devices on Alexa.</big>''<br />
#<big>Some fan controller drivers have both fan control and level control capabilities. To use level control capabilities, enable this option in the Amazon Echo Skill app.</big>[[File:Amazon Echo Skill use level control for fans.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/f/fc/Amazon_Echo_Skill_use_level_control_for_fans.png ]]<br />
<br />
===<big>Activating the Hubitat Skill for Alexa</big>===<br />
<br />
#<big>From the Amazon Alexa app, tap the hamburger menu labelled '''More''' at the lower right.</big>[[File:Alexa app hamburger menu v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/f3/Alexa_app_hamburger_menu_v2.png ]]<br />
#<big>Select '''Skills and Games''' from the menu</big>[[File:Alexa app Skill and Games v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_app_Skill_and_Games_v2.png ]]<br />
#<big>Tap the '''Search''' icon</big>[[File:Alexa app search for skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/70/Alexa_app_search_for_skill.png ]]<br />
#<big>Search for '''Hubitat'''</big>[[File:Search for Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d2/Search_for_Hubitat_Alexa_Skill.png ]]<br />
#<big>Select the '''Hubitat''' Alexa Skill from the search results.</big>[[File:Select Hubitat Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/2/28/Select_Hubitat_Alexa_Skill.png ]]<br />
#<big>Tap '''ENABLE TO USE''' on the Alexa Skill</big>[[File:Enable Hubitat Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/0/0f/Enable_Hubitat_Skill.png ]]<br />
#<big>Enter the same username and password you used to register your hub.</big><br />
#*<big>'''NOTE''': Social media logins have been retired. Hubitat Elevation with social media accounts. You must sign in with your Hubitat administrator email and password to authorize Amazon Alexa.</big>[[File:Sign into Alexa Hubitat Skill.png|none|thumb|523x523px|link=https://docs.hubitat.com/images/b/be/Sign_into_Alexa_Hubitat_Skill.png ]]<br />
#<big>Select your hub name from the list</big>[[File:Select Hub in Alexa Hubitat app.png|none|thumb|526x526px|link=https://docs.hubitat.com/images/b/b7/Select_Hub_in_Alexa_Hubitat_app.png ]]<br />
#<big>Select the devices on your Hubitat Elevation hub you want the Alexa Skill to have access to and tap '''Authorize'''.</big><br />
#*<big>'''NOTE''': The devices from your hub that are made available to Alexa can always be changed later from the Amazon Echo Skill app on your hub.</big>[[File:Hubitat Alexa Skill-Device selection.png|none|thumb|521x521px|link=https://docs.hubitat.com/images/6/6c/Hubitat_Alexa_Skill-Device_selection.png ]]<br />
#<big>Once you have a confirmation that your Hubitat account has been successfully linked, close the confirmation message to begin device discovery.</big>[[File:Hubitat Alexa Skill linked v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/b/bc/Hubitat_Alexa_Skill_linked_v2.png]]<br />
#<big>Select '''DISCOVER DEVICES''' in the Alexa app or web portal.</big>[[File:Discover devices after adding Alexa Skill.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/db/Discover_devices_after_adding_Alexa_Skill.png ]]<br />
#<big>Alexa will search for devices to add so Alexa can interact with them.</big>[[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
#<big>Once your devices are discovered and added, you will be able to control devices with your voice.</big><br />
#*<big>'''NOTE''': The Amazon Echo Skill app and Amazon Echo App are capable of controlling '''switches''', '''dimmers''', '''door locks''', '''fan controllers''', '''garage door controllers''', '''shade controllers''', and '''thermostat devices''', with an optional '''advance thermostat interface''' to support all available set points. Supported sensors include '''contact''' and '''motion sensors'''. Buttons are not supported by the Amazon Echo Skill app.</big>[[File:Found device for Alexa.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/8f/Found_device_for_Alexa.png ]]<br />
<br />
===<big>Adding additional devices or Removing devices from Alexa</big>===<br />
<br />
#<big>To add or remove devices after initial setup, open the Amazon Echo Skill app on your hub. Additional devices selected will automatically be discovered by the Alexa platform.</big>[[File:Amazon Echo Skill app list view.png|none|thumb|610x610px|link=https://docs.hubitat.com/images/d/d1/Amazon_Echo_Skill_app_list_view.png ]][[File:Amazon Echo Skill app - Select devices.png|none|thumb|423x423px|link=https://docs.hubitat.com/images/6/6f/Amazon_Echo_Skill_app_-_Select_devices.png ]]<br />
#<big>The Alexa app will notify you of the change if you have notifications enabled on your mobile device. If you de-select a device in the Amazon Echo Skill app, it will be automatically removed from your Alexa account.</big><br />
#*<big>'''NOTE:''' Deleting a shared device from the Alexa app does not de-select it in the Amazon Echo Skill app on your hub. If a device remains selected for use with the Amazon Echo Skill app on your hub, it will be discovered again and added back to the Alexa app. To permanently remove it from your Alexa account, it must be de-selected for use by the Amazon Echo Skill app on your hub.</big>[[File:Alexa device added notification.png|none|thumb|400x400px|link=https://docs.hubitat.com/images/f/f9/Alexa_device_added_notification.png ]]<br />
<br />
===<big>Manual Alexa app Device Discovery</big>===<br />
<br />
#<big>If you need to manually discover devices, start by tapping the devices icon at the bottom of the Alexa app.</big><br />
#<big>Tap the '''+''' icon at the top right of the Alexa app.</big>[[File:Alexa manual discovery - Step 1.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/f/fe/Alexa_manual_discovery_-_Step_1.png ]]<br />
#<big>Tap '''Add Device'''</big>.[[File:Alexa manual discovery - Step 2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/8/89/Alexa_manual_discovery_-_Step_2.png ]]<br />
#<big>Scroll to the bottom and select '''Other'''</big>.[[File:Alexa manual discovery - Step 3.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/d/d9/Alexa_manual_discovery_-_Step_3.png ]]<br />
#Press the '''Discover Devices''' button.[[File:Alexa manual discovery - Step 4.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/3/3a/Alexa_manual_discovery_-_Step_4.png ]][[File:Alexa is discovering devices v2.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/c/ce/Alexa_is_discovering_devices_v2.png ]]<br />
<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=File:Install_Amazon_Echo_Skill_3.0.png&diff=5190File:Install Amazon Echo Skill 3.0.png2021-08-18T16:55:31Z<p>Doug: </p>
<hr />
<div>Install Amazon Echo Skill 3.0</div>Doughttps://docs.hubitat.com/index.php?title=Rule-5.0&diff=5189Rule-5.02021-08-09T16:26:28Z<p>Doug: /* Hub Variables */</p>
<hr />
<div>{{DISPLAYTITLE:Rule-5.0}}<br />
{{Top}}<h1><big>Rule Machine<sup>®</sup> 5.0</big></h1><big>Rule-5.0 is the culmination of a journey in the transformation of the Rule Machine app. All at once, it simplifies and adds power, resulting in a fully generalized automation engine. The prior top-level organization of Rule Machine has been replaced with an optimized interface. The changes described below, explain how prior rules were created versus how it is accomplished with Rule-5.0. The former structure of Rules, Triggers, Triggered Rules, Actions and Schedules are now replaced with the definition of what causes a rule to run, and the resulting action. The former Button Controller app is now incorporated into Rule Machine, but with increased power and flexibility. New conditional logic capabilities are provided, allowing the most subtle or complex automations to be created. You simply define what causes the a rule to run, and then that you want it to do.</big><br />
===<big>Logic in a Rule-5.0 rule</big>===<br />
<big>In any Rule, the rule itself can be thought of as an overarching '''IF-THEN-ELSE''', where if the condition was '''True''' for the '''IF''' part or the rule, then '''Actions for True''' are run, and if they are '''False''', then '''Actions for False''' are run. In '''Rule-5.0''', this same logic can now simply be done with the '''Conditional Actions''' of '''IF-THEN and ELSE''' in the '''Actions''' section of a rule. As described in the next section, '''IF-THEN''' now has the same full logical expression capability previously available, with the addition of '''AND, OR, XOR, NOT''' logical operators, and nested parenthetical sub-expressions.</big><br />
<br />
*<big>'''Example:''' Using a Trigger Event such as a contact sensor '''Front Door *changed*''' to illustrate the difference, the previous Rule Machine version used this to interpret the '''Condition of Front Door *open*.''' The rule was evaluated whenever '''any''' event happened for the Front Door. In Rule-5.0, this is explicit, whereas in previous versions the rule was '''Front Door *open*''', we now make that event the Condition of an '''IF-THEN''' action. What were formerly '''Actions for True''', now become the Actions following '''IF-THEN''', and the former '''Actions for False''' become the actions following '''ELSE'''. Most Rules will now follow this basic format.</big><br />
<br />
===<big>Rule Triggers</big>===<br />
<big>All "Rules" in Rule-5.0 are in effect '''Triggered Rules'''. They each have a '''Trigger Event''', and then '''Conditional Actions'''. Instead of a rule with '''Actions for True''' and '''Actions for False''', they simply use conditional logic in the actions to create an equivalent '''IF-THEN-ELSE''' structure.</big><br />
===<big>Events</big>===<br />
<big>Each rule can have one or more '''Trigger Events''' that when triggered, cause the rule's actions to run.</big><p><big>Events are created by the devices or conditions in your system. Each device creates events appropriate to the type of device. A '''Trigger Event''' listens for specific events and when a trigger receives a selected event, it causes the defined '''Actions''' to run.</big></p><p><big>Rule Machine allows the following events in a Hubitat Elevation system to be acted upon. Each event results in a single test and the supported events and states that can be tested are listed below. For each event that refers to a device, one or more devices can be selected, and then the device state required for the '''Condition''' to be met can be selected. When multiple devices are selected, the Condition/Event may apply for '''ANY''' (default) or '''ALL''' of the devices.</big></p><pre>Acceleration: active / inactive<br />
Between two dates: starting month on this date / ending month on this date<br />
Battery: value<br />
Button: pressed / held / doubleTapped / released<br />
Button Device: select actions for any buttons of a button device<br />
Certain Time: at a certain time, including sunrise / sunset with offset<br />
Cloud End Point: hitting URL fires<br />
Contact: open / closed<br />
Custom attribute: device capability<br />
Days of Week: on certain days of the week<br />
Dimmer level: value<br />
Door: open, closed, opening, closing, unknown<br />
Energy meter: value<br />
Garage door: open, closed, opening, closing, unknown<br />
HSM alert: intrusion, intrusion-delay, intrusion-home, intrusion-home-delay, intrusion-night, cancelRuleAlerts, intrusion-night-delay, <br />
smoke, water, rule, arming, armingHome, armingNight, cancel<br />
HSM status: armed away, armed home, armed night, delayed arming home, delayed arming night, delayed arming away, disarmed, all disarmed<br />
Humidity: value<br />
Illuminance: value<br />
Last Event Device select device and attribute<br />
Local End Point: hitting URL fires<br />
Lock: locked / unlocked<br />
Mode: any of your hub's modes<br />
Motion: active / inactive<br />
Music player: playing, paused, stopped<br />
Periodic: allows periodic schedules for minutes, hourly, daily, weekly, monthly or yearly<br />
Physical dimmer level: value <br />
Physical switch: on / off<br />
Power meter: value<br />
Power source: mains / battery<br />
Presence: present / not present or arrives / leaves<br />
Private Boolean: true / false<br />
Rule paused: rule<br />
Smoke detector: clear, detected, tested<br />
Switch: on / off<br />
Temperature: value<br />
Thermostat cool setpoint: value<br />
Thermostat fan mode: value<br />
Thermostat heat setpoint: value<br />
Thermostat mode: heat / cool / auto / off / emergency heat<br />
Thermostat state: heating / cooling / fan only / idle / pending heat / pending cool<br />
Time of day: specific time / sunrise / sunset<br />
Variable: value<br />
Water sensor: dry / wet<br />
<br />
Note: value means compare current value to a number, to another device with an offset, or to a variable with an offset, or changed, increased, decreased</pre><br />
===<big>Actions</big>===<br />
<big>Actions are the portion of a rule that defines what the rule does when it is triggered to run.</big><br />
====<big>Actions as ordered script</big>====<br />
<big>As you define actions, you are creating a script of actions to perform when the rule runs. You may use as many actions as you want for each '''Action''' type and they can be run in whatever order you want. There is no predefined order of execution for Rule Machine actions, so you may arrange the order of actions any way you want. You can insert a new action anywhere in the list of actions, or at the end of the list.</big><br />
====<big>Actions can be modified</big>====<br />
<big>The Rule-5.0 user interface provides the ability to '''Edit''' and '''Delete''' any action you have defined, giving you complete control over your list of actions.</big> <br />
[[File:Rule-5.0 Edit and Delete Actions.png|none|thumb|600x600px]]<br />
<big>You may also '''Cut''' and then '''Paste''' actions if you need them to occur in a different order.</big><br />
<br />
#Select the action to cut.<br />
#Choose the new position for the action you just cut. The desired position could also be the end of the action list by choosing to paste the action before '''**End of Actions**''', which would paste the cut action at the end of the action list.[[File:Rule-5 cut action.png|none|thumb|600x600px]][[File:Rule-5.0 Paste Action Before v2.png|none|thumb|600x600px]][[File:Rule-5 action position after paste action.png|none|thumb|600x600px]]<br />
<br />
====<big>Delay Actions and Delay Actions per Mode</big>====<br />
<big>All actions can be delayed, effectively pausing the action execution for a specified amount of time. A</big><big>ctions</big> <big>may</big> <big>also be delayed for a period of time that is dependent on the current '''Mode''' by using '''Delay Actions Per Mode'''.</big><br />
<br />
<big>'''Delay per Action'''</big><br />
<br />
<big>Each action you define can have an optional delay. These delays can be defined with hours, minutes, and seconds. Seconds can have decimal fractions, allowing millisecond resolution. In a rule, delays can have the '''option to be cancelled''' in the event of a change of rule truth. It is important to realize that the delay assigned to an individual action affects only that action, and not subsequent actions. Any subsequent action is executed immediately after the delayed action starts its delay timer, and does not wait for that delay timer to run. When the delay timer expires, the delayed action is executed (unless the delay was cancelled).</big><br />
[[File:Rule Machine Delay per action.png|none|thumb|600x600px]]<br />
<big>'''Delay all Actions'''</big><br />
<br />
<big>It is also possible to delay all actions (also with optional cancel). The script of actions runs sequentially when the rule runs, with each action happening in order. Actions with delays start their timer, which can vary for each action, and '''<u>the next action in order</u>''' runs. By using '''Delay Actions''', the entire script can be ''paused'' by a delay.</big><br />
<br />
<big>'''Delay Actions per Mode'''</big><br />
<br />
<big>Delay Actions can also be specified on a per mode basis, so that the time the script is paused, varies according to the current mode.</big><br />
===<big>Rule-5.0 Conditional Actions and Logical Expressions</big>===<br />
<big>In Rule Machine, '''IF-THEN-ELSE-ENDIF''' conditional blocks can be nested. The user interface utilizes textual indentation to help guide you in keeping track of which '''IF-THEN-ELSE-ENDIF''' block you are currently adding actions to. The user is responsible for completing each level of nested '''IF-THEN''' blocks.</big><br />
<br />
<big>The condition of an '''IF-THEN''' or '''ELSE-IF''' Action can be a full logical expression built-up from individual conditions, and the logical operators '''AND''', '''OR''', '''XOR''', and '''NOT'''. Parenthesized sub-expressions are also possible. This is the same user interface of the former rule portion found in Rule or Triggered Rule from Rule-3.0. An individual '''Condition''' can be created ''on the fly'' while defining a logical expression. Every such '''Condition''' is kept in the list of available Conditions. This list of available conditions is present in the '''Define Actions''' page. The user interface then allows Creating, Editing and Deleting conditions. If a condition is edited, those changes will be reflected where it is used in an '''IF-THEN''' or '''ELSE-IF''' conditional action.</big><br />
<br />
<big>This combination of nested '''IF-THEN''' blocks and full logical expression for each '''IF-THEN''' and '''ELSE-IF''', allows creativity for rules in Rule-5.0 that is limited only by your imagination. To help you with complex logic structures, new actions are available.</big><br />
<br />
#<big>Exit Rule - With Exit Rule the execution of '''Actions''' for that rule will stop, irrespective of what order in the rule it exists.</big><br />
#<big>Pending Delays are not cancelled, and current Repetitions are not stopped by Exit Rule, but these can be managed separately if needed with '''Stop Repeating Actions''', '''Cancel Rule Timers''', and '''Cancel Delayed Actions''', where appropriate.</big><br />
<br />
====<big>Automatic Condition Creation</big>====<br />
<big>When '''Event Triggers''' are defined, corresponding conditions are created for most types. Some conditions, like '''Button''', '''Certain Time''', etc, do not have a ''state'' and so have no corresponding condition. These created conditions are available in the '''Define Actions''' page for use in '''Conditional Actions''', are available for use in other Actions, and can be edited.</big><br />
<br />
====<big>IF-THEN-ELSE</big>====<br />
<big>You can introduce conditional execution of actions using the following method.</big><br />
IF (condition) THEN <br />
some actions...<br />
ELSE-IF (condition) THEN <br />
some actions...<br />
ELSE <br />
some actions...<br />
END-IF <br />
<big>'''IF-THEN''' and '''ELSE-IF''' both accept a logical expression as described above and '''IF-THEN-ELSE''' may also be nested. If the expression on the '''IF''' portion is True, then those actions following '''IF''' and before any '''ELSE-IF''' or '''ELSE''' statements will be carried out. If the expression is False, then those actions are skipped, and the '''ELSE''' portion or '''ELSE-IF''' are carried out. In the case of '''ELSE-IF''', its expression will be tested, and the following Actions that follow it will either run or will not run, depending on the result of the evaluation. There can be as many '''ELSE-IF''' sections as you need, and the '''ELSE-IF''' and '''ELSE''' portions are both are optional. '''END-IF''' is also optional, and if omitted means all remaining actions are part of the preceding '''IF-THEN''', '''ELSE-IF''' or '''ELSE'''. However, for good rule structure, just a sentence should have a period at the end, it is strongly recommended that you use END-IF to complete an '''IF-THEN-ELSE''' as a regular practice.</big><br />
===<big>Repeat Actions</big>===<br />
<big>Portions of, or all of the script of an '''Action''' can be repeated periodically, but you must specify the time interval for the repetition. Be careful not to make this interval too short, as you can consume your hub CPU resources by repeating too quickly. You can select any number of iterations if desired, but some method to stop the repetition is required. When a '''Repeat Actions''' is introduced to the script, any action before '''END-REP''' will be repeated. Only the Actions between '''Repeat Actions''' and '''END-REP''' will be repeated. Actions following '''END-REP''' will run only once the repetition has stopped. There is an optional '''Stop for a Repeat Action''' choice and if selected, then '''Stop Repeating Actions''' will stop this repetition. Using '''Cancel Rule Timers''' from either the current rule or another rule, will stop '''<u>all Repeat Actions</u>''', irrespective of which Stop selection is used.</big><br />
Repeat Actions<br />
some actions...<br />
END-REP<br />
<big>A '''Repeat Actions''', like any action, can have a condition specified. If the condition is False, the '''Repeat Actions''' block will not be executed. If the condition becomes False during repetition, the repetition will be stopped (with the exception of when '''Repeat N Times''' is selected). This provides three features well known to computer programmers.</big><br />
<br />
#<big>While-loop - The '''while-loop''' runs only if the condition is true, and stops if it is false.</big><br />
#<big>For-loop - A '''for-loop''' runs for a fixed number of times, but if a condition exists, it will only start that iteration if the condition is true; The condition is not retested during iteration.</big><br />
#<big>Repeat-until loop - A repeat-until loop runs until a condition becomes true, running at least once.</big><br />
<br />
'''<big>Examples:</big>'''<br />
<br />
''<big>While loop - repeat while the condition is True:</big>''<br />
IF (condition) Repeat Actions<br />
some actions...<br />
END-REP<br />
''<big>For loop (repeat n times):</big>''<br />
Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Conditional For loop (repeat n times if condition is True):</big>''<br />
IF (condition) Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Repeat-Until loop:</big>''<br />
Repeat Actions with Stop selected<br />
some actions<br />
IF (condition) Stop Repeating Actions<br />
END-REP<br />
<big>'''Repeat Actions''' cannot be nested. '''END-REP''' is optional, and if omitted, all actions after '''Repeat Actions''' will be repeated.</big><br />
<br />
*<big>'''Note''': The '''END-REP''' does not have anything to do with the when a '''Repeated Action''' will stop repeating, it merely marks the end of the list of actions to be repeated. If you use '''Repeat These Actions''' without specifying '''N Times''' (for loop), and without a '''Condition''' (while loop), and also without a '''Conditional Stop''' or a '''Stop on Truth Change''' (for rules only), that means it should repeat <u>forever</u>, and that is probably not what you want to have happen. In that case, some other rule would need to cause the repetition to stop.</big><br />
<br />
===<big>Wait for Events and Wait for Conditions</big>===<br />
<big>'''Wait for Events''' and '''Wait for Conditions''' may be using with Conditional Actions and in a '''Simple Conditional Action'''. Additionally, '''Wait for Conditions''' allows for full logical expression with operators '''AND''', '''OR''', or '''XOR.''' If the conditions are true, no wait occurs, otherwise the rule execution is paused until the conditions are met.</big> <big>Both '''Wait for Events''' and '''Wait for Conditions''' have the option to select a '''Timeout''' period. Multiple events can be defined to cause the Wait to end. In effect, this introduces another trigger-like capability into the Actions. There is also an event type specifically for '''Wait for Events''' named '''Elapsed Time'''. When the '''Elapsed Time''' expires, the wait will be over, irrespective of other events it may be waiting for. Pending '''Wait for Events''' and '''Wait for Conditions''' will be cancelled each time a rule is triggered, and can be also cancelled by another rule with '''Stop Rule Actions''', or by a '''Cancel Wait''' action (which presumably would have been part of a Delayed Action).</big> <br />
<br />
<big>'''Wait for Conditions''' also has an option to use '''Duration''' instead of a '''Timeout''' period, allowing you to specify an amount of time that the Conditions must remain continuously true for the Wait to conclude. This is useful for many automations that require the passage of some time in a certain state, such as a door that has been left open for more than 5 minutes. The rule would '''Wait for Conditions''' that the door is open for a duration of 5 minutes, Following the Wait period, you could have a notification action. If the door was subsequently closed before the 5 minute duration period, the Wait wouldn't conclude. If the door opened again, the pending Wait would then be canceled, and a new one begins. Only if the door is opened and remains open for 5 minutes would the Wait conclude, and the notification be sent.</big><br />
[[File:Wait for conditions example.png|none|thumb|600x600px]]<br />
<br />
*<big>'''NOTE:''' In cases where a rule’s trigger event is closely related to the Conditions, such as in the above example of a door remaining open, two subscriptions will fire. One subscription will be for the '''Trigger''', and one for the pending Wait. The trigger will win, thus canceling the pending wait, but if logging is enabled you will find both outcomes of the event in the logs. It is important to <u>never use</u> a *changed* trigger with '''Wait for Conditions''' on a related event, since it would result in a re-trigger after every event related to the Conditions, and the Wait would never conclude because would be cancelled by the *changed* trigger.</big><br />
<br />
===<big>Custom Actions</big>===<br />
<big>A Custom Action allows you to select a device, and send any of the commands that device supports along with parameters it may take. '''Custom Actions''' are created within your actions and they are specific to the rule where created.</big><br />
<br />
=== <big>Hub Variables</big> ===<br />
<big>Hub Variables are a setting for creating very efficient variables directly in the hub for use in other apps, not just in Rule Machine, as is the case with Local Variables. There are five types of Hub Variables available - '''Number''', '''Decimal''', '''String''', '''Boolean''' and '''DateTime'''.</big><br />
<br />
<big>Each Hub Variable can have an associated '''Connector'''. A Connector is a virtual device linked to the Hub Variable. When the Hub Variable value changes, so does the Connector value, and vice versa. When the Connector device is set to a different value, the corresponding Hub Variable is set to that value. Connectors can be used in any app. The aforementioned '''DateTime''', allows '''both''' Date and Time to be set. The use of Date has very limited applicability for now, specifically in the Certain Time trigger for Rule 5.0, where triggering on a specific date is possible; by using a '''DateTime''' connector, that can be a variable Date and Time.</big><br />
<br />
<big>Managing '''Hub Variables''' can be found in Settings, allowing for the creation of a Hub Variable, changing its value, creating a '''Connector''' for it, and removing it. If a Hub Variable is in use by an app, the name of the Hub Variable is shown in '''<span style="color: orange;;">Orange</span>''', and selecting that shows the apps it is in use by. When a Connector is created, the type of Connector is shown in '''<span style="color: blue;;">Blue</span>''', and selecting that connector opens a new tab with the Connector device settings page. The value of the variable can be changed by selecting the '''<span style="color: purple;;">Purple</span>''' text in the Value column. When a Connector exists, the variable value is shown with the selected attribute for the Connector.</big><br />
<br />
<big>'''Example:''' A Boolean variable for which a '''Switch Connector''' is created, will show '''On''' or '''Off''' as the possible values, rather than '''True''' or '''False'''.</big><br />
<br />
* <big>To '''remove a Connector''', open the device page for the Connector and remove it from that page. If the Connector is in use by any apps, be sure to clean up those apps first; the warning to do so is presented to prevent mistakes.</big><br />
<br />
* <big>To '''remove a Hub Variable''', click on Delete for that variable. If the variable is in use by an app, an appropriate warning will be provided, and those apps should be cleaned up before deleting the Hub Variable.</big><br />
<br />
===<big>Run Actions from the Rule-5.0 User Interface</big>===<br />
<big>When you first create a new rule, you are creating a child app of the parent Rule Machine app, and therefor you must select '''Done''' on the main page to install the Rule-5.0 rule. If you re-open the rule, its actions can be run by hitting '''Run Actions''' button. If you change the '''Trigger Events''' in any way, you must either select '''Done''' or the '''Update Rule''' button.</big><br />
<br />
===<big>Rule Logging</big>===<br />
<big>You can select which types of logging you want to see in [https://docs.hubitat.com/index.php?title=Logs Logs]. This is a very good way to determine exactly what a rule is doing.</big><br />
===<big>List of Actions</big>===<br />
<pre> Conditional Actions <br />
IF (conditions) THEN<br />
ELSE-IF (conditions) THEN<br />
ELSE<br />
END-IF<br />
Simple Conditional Action<br />
Control Switches, Push Buttons <br />
Turn switches on<br />
Turn switches off<br />
Toggle switches<br />
Flash switches<br />
Set switches per mode<br />
Push a button<br />
Push a button per mode<br />
Set Dimmers and Bulbs <br />
Set dimmer level<br />
Toggle dimmer level<br />
Adjust dimmer level<br />
Set dimmer level per mode<br />
Fade dimmer level over time<br />
Stop dimmer fade<br />
Start raising dimmer level<br />
Start lowering dimmer level<br />
Stop changing dimmer level<br />
Set color and level<br />
Toggle color and level<br />
Set color and level per mode<br />
Set color temperature and level<br />
Toggle color temperature and level<br />
Set color temperature and level per mode<br />
Change color temperature over time<br />
Stop changing color temperature<br />
Activate Scenes, Adjust Shades or Fans <br />
Activate scenes<br />
Activate scenes per mode<br />
Open shades<br />
Close shades<br />
Set shade position<br />
Set fan speed<br />
Cycle fans<br />
Control HSM, Garage Doors, Locks or Valves <br />
Arm/Disarm Hubitat® Safety Monitor<br />
Open garage door<br />
Close garage door<br />
Lock locks<br />
Unlock locks<br />
Open valves<br />
Close valves<br />
Control Thermostats or Thermostat Scheduler <br />
Set thermostats<br />
Set Thermostat Scheduler<br />
Send, Speak, or Log a Message, Send HTTP Request <br />
Send or Speak a Message<br />
Log a Message<br />
Send HTTP Get<br />
Send HTTP Post<br />
Control Music Player, Volume, Sounds<br />
Control Music Player<br />
Set Volume<br />
Mute<br />
Unmute<br />
Sound Tone<br />
Sound Chime<br />
Control Siren<br />
Set Mode or Variables, Run Custom Action <br />
Set Mode<br />
Run Custom Action<br />
Write to local file<br />
Append to local file<br />
Delete local file<br />
Set Private Boolean, Run/Cancel/Pause Rules <br />
Set Private Booleans True<br />
Set Private Booleans False<br />
Run Rule Actions<br />
Cancel Rule Timers<br />
Pause Rules<br />
Resume Rules<br />
Capture/Restore, Device Refresh or Polling <br />
Capture Devices<br />
Restore Devices<br />
Refresh devices<br />
Poll devices<br />
Start Z-Wave poll on switches<br />
Stop Z-Wave poll on switches<br />
Start Z-Wave poll on dimmers<br />
Stop Z-Wave poll on dimmers<br />
Delay or Repeat Actions, Wait <br />
Delay Actions<br />
Delay Actions Per Mode<br />
Cancel Delayed Actions<br />
Repeat Actions<br />
END-REP<br />
Stop Repeating Actions<br />
Wait for Events<br />
Wait for Condition<br />
Cancel Wait<br />
Exit Rule<br />
Comment</pre><br />
<br />
===<big>Export, Import or Clone of Rule Machine Rules</big>===<br />
<big>Select this option to allow export of your Rule Machine rules for import to another hub, or to clone an existing rule as a base from which to start a new rule.</big><br />
[[File:Export Import and Clone RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/99/Export_Import_and_Clone_RM_rule_v2.png<br />
]]<br />
<br />
====<big>Export a Rule</big>====<br />
<br />
#<big>Select a single or multiple rules for '''Export'''. You may export multiple rules to a single file, and still have the option to select which rules to later '''Import'''.</big>[[File:Export Selected RM rules v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/00/Export_Selected_RM_rules_v2.png ]]<br />
#<big>Press the '''Download''' button to save the file to your local drive in the designated file download location for your browser. Typically this will be your '''Downloads''' folder.</big>[[File:Export RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/52/Export_RM_rule_v2.png ]]<br />
<br />
====<big>Restore or Import a Rule</big>====<br />
<big>You may choose to '''Restore''' a rule instead of using the '''Import''' option. This is most appropriate for instances where you want to bring a Rule Machine rule into your hub database, but you do not want to change the name or the devices used in the rule. If you instead choose to '''Import''', the process will pause to allow the rule to be renamed, and the devices used in the rule to be substituted with other devices installed on your hub before completing the import process.</big><br />
<br />
'''<big>Restore</big>'''<br />
<br />
#<big>To '''Restore''', select the saved file you previously exported, then press the '''Restore''' button.</big>[[File:Restore RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/6b/Restore_RM_rule.png ]]<br />
<br />
'''<big>Import</big>'''<br />
<br />
#<big>To '''Import''', select the saved file you previously exported and press the '''Import...''' button.</big>[[File:Import RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/c/c9/Import_RM_rule.png ]]<br />
#<big>Select the rules for import.</big>[[File:Selected RM rule for import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/16/Selected_RM_rule_for_import.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big><br />
#*<big>'''NOTE:''' If you '''Import''' a rule to another hub without selecting replacement devices, any existing devices with those same names will be used in the imported rule. If the devices do not exist, virtual devices with those same names will automatically be created. This is very helpful when you need to replace devices of an imported rule, but do not yet have the devices available that will replace them.</big>[[File:Rename and change RM devices before import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/da/Rename_and_change_RM_devices_before_import.png ]]<br />
#<big>When ready to import, press the '''Import ['''rule name''']''' button.</big>[[File:Rule Machine Import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/1a/Rule_Machine_Import.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been imported.</big>[[File:RM Import confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/9c/RM_Import_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps.</big>[[File:Show imported Rule-5 rules.png|none|thumb|600x600px]]<br />
#*<big>'''<span style="color: red;;">IMPORTANT!</span>''' - If you import rules that contain a Private Boolean, it must be manually adjusted after importing the rule. In the following example, you will see that an imported rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]][[File:Imported rule with PB not pointing anywhere.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d4/Imported_rule_with_PB_not_pointing_anywhere.png ]]<br />
<br />
====<big>Clone a Rule</big>====<br />
<br />
#<big>To '''Clone''' a rule, select the rule from the list of available Rule Machine rules on your hub and press the '''Clone''' button.</big>[[File:Select Rule Machine rule for clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/2d/Select_Rule_Machine_rule_for_clone.png ]][[File:Initiate Rule Machine cloning.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/68/Initiate_Rule_Machine_cloning.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big>[[File:Rename and change RM devices before clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/dd/Rename_and_change_RM_devices_before_clone.png ]]<br />
#<big>When ready to proceed, press the '''Clone ['''rule name''']''' button.</big>[[File:Clone Rule Machine rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/55/Clone_Rule_Machine_rule.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been cloned.</big>[[File:RM rule clone confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/46/RM_rule_clone_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps. If you did not change the name, the rule will be imported under the same name, but it will have the word '''clone''' added to the end.</big>[[File:Show cloned Rule-5 rule.png|none|thumb|600x600px]]<br />
#*<big><span style="color: red;;">'''IMPORTANT!'''</span> If you '''Clone''' rules that contain a Private Boolean, it must be manually corrected after cloning the rule. In the following example, you will see that a cloned rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]] [[File:Cloned rule with incorrect PB setting.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/48/Cloned_rule_with_incorrect_PB_setting.png ]]</div>Doughttps://docs.hubitat.com/index.php?title=Rule-5.0&diff=5188Rule-5.02021-08-09T16:25:51Z<p>Doug: /* Custom Actions */</p>
<hr />
<div>{{DISPLAYTITLE:Rule-5.0}}<br />
{{Top}}<h1><big>Rule Machine<sup>®</sup> 5.0</big></h1><big>Rule-5.0 is the culmination of a journey in the transformation of the Rule Machine app. All at once, it simplifies and adds power, resulting in a fully generalized automation engine. The prior top-level organization of Rule Machine has been replaced with an optimized interface. The changes described below, explain how prior rules were created versus how it is accomplished with Rule-5.0. The former structure of Rules, Triggers, Triggered Rules, Actions and Schedules are now replaced with the definition of what causes a rule to run, and the resulting action. The former Button Controller app is now incorporated into Rule Machine, but with increased power and flexibility. New conditional logic capabilities are provided, allowing the most subtle or complex automations to be created. You simply define what causes the a rule to run, and then that you want it to do.</big><br />
===<big>Logic in a Rule-5.0 rule</big>===<br />
<big>In any Rule, the rule itself can be thought of as an overarching '''IF-THEN-ELSE''', where if the condition was '''True''' for the '''IF''' part or the rule, then '''Actions for True''' are run, and if they are '''False''', then '''Actions for False''' are run. In '''Rule-5.0''', this same logic can now simply be done with the '''Conditional Actions''' of '''IF-THEN and ELSE''' in the '''Actions''' section of a rule. As described in the next section, '''IF-THEN''' now has the same full logical expression capability previously available, with the addition of '''AND, OR, XOR, NOT''' logical operators, and nested parenthetical sub-expressions.</big><br />
<br />
*<big>'''Example:''' Using a Trigger Event such as a contact sensor '''Front Door *changed*''' to illustrate the difference, the previous Rule Machine version used this to interpret the '''Condition of Front Door *open*.''' The rule was evaluated whenever '''any''' event happened for the Front Door. In Rule-5.0, this is explicit, whereas in previous versions the rule was '''Front Door *open*''', we now make that event the Condition of an '''IF-THEN''' action. What were formerly '''Actions for True''', now become the Actions following '''IF-THEN''', and the former '''Actions for False''' become the actions following '''ELSE'''. Most Rules will now follow this basic format.</big><br />
<br />
===<big>Rule Triggers</big>===<br />
<big>All "Rules" in Rule-5.0 are in effect '''Triggered Rules'''. They each have a '''Trigger Event''', and then '''Conditional Actions'''. Instead of a rule with '''Actions for True''' and '''Actions for False''', they simply use conditional logic in the actions to create an equivalent '''IF-THEN-ELSE''' structure.</big><br />
===<big>Events</big>===<br />
<big>Each rule can have one or more '''Trigger Events''' that when triggered, cause the rule's actions to run.</big><p><big>Events are created by the devices or conditions in your system. Each device creates events appropriate to the type of device. A '''Trigger Event''' listens for specific events and when a trigger receives a selected event, it causes the defined '''Actions''' to run.</big></p><p><big>Rule Machine allows the following events in a Hubitat Elevation system to be acted upon. Each event results in a single test and the supported events and states that can be tested are listed below. For each event that refers to a device, one or more devices can be selected, and then the device state required for the '''Condition''' to be met can be selected. When multiple devices are selected, the Condition/Event may apply for '''ANY''' (default) or '''ALL''' of the devices.</big></p><pre>Acceleration: active / inactive<br />
Between two dates: starting month on this date / ending month on this date<br />
Battery: value<br />
Button: pressed / held / doubleTapped / released<br />
Button Device: select actions for any buttons of a button device<br />
Certain Time: at a certain time, including sunrise / sunset with offset<br />
Cloud End Point: hitting URL fires<br />
Contact: open / closed<br />
Custom attribute: device capability<br />
Days of Week: on certain days of the week<br />
Dimmer level: value<br />
Door: open, closed, opening, closing, unknown<br />
Energy meter: value<br />
Garage door: open, closed, opening, closing, unknown<br />
HSM alert: intrusion, intrusion-delay, intrusion-home, intrusion-home-delay, intrusion-night, cancelRuleAlerts, intrusion-night-delay, <br />
smoke, water, rule, arming, armingHome, armingNight, cancel<br />
HSM status: armed away, armed home, armed night, delayed arming home, delayed arming night, delayed arming away, disarmed, all disarmed<br />
Humidity: value<br />
Illuminance: value<br />
Last Event Device select device and attribute<br />
Local End Point: hitting URL fires<br />
Lock: locked / unlocked<br />
Mode: any of your hub's modes<br />
Motion: active / inactive<br />
Music player: playing, paused, stopped<br />
Periodic: allows periodic schedules for minutes, hourly, daily, weekly, monthly or yearly<br />
Physical dimmer level: value <br />
Physical switch: on / off<br />
Power meter: value<br />
Power source: mains / battery<br />
Presence: present / not present or arrives / leaves<br />
Private Boolean: true / false<br />
Rule paused: rule<br />
Smoke detector: clear, detected, tested<br />
Switch: on / off<br />
Temperature: value<br />
Thermostat cool setpoint: value<br />
Thermostat fan mode: value<br />
Thermostat heat setpoint: value<br />
Thermostat mode: heat / cool / auto / off / emergency heat<br />
Thermostat state: heating / cooling / fan only / idle / pending heat / pending cool<br />
Time of day: specific time / sunrise / sunset<br />
Variable: value<br />
Water sensor: dry / wet<br />
<br />
Note: value means compare current value to a number, to another device with an offset, or to a variable with an offset, or changed, increased, decreased</pre><br />
===<big>Actions</big>===<br />
<big>Actions are the portion of a rule that defines what the rule does when it is triggered to run.</big><br />
====<big>Actions as ordered script</big>====<br />
<big>As you define actions, you are creating a script of actions to perform when the rule runs. You may use as many actions as you want for each '''Action''' type and they can be run in whatever order you want. There is no predefined order of execution for Rule Machine actions, so you may arrange the order of actions any way you want. You can insert a new action anywhere in the list of actions, or at the end of the list.</big><br />
====<big>Actions can be modified</big>====<br />
<big>The Rule-5.0 user interface provides the ability to '''Edit''' and '''Delete''' any action you have defined, giving you complete control over your list of actions.</big> <br />
[[File:Rule-5.0 Edit and Delete Actions.png|none|thumb|600x600px]]<br />
<big>You may also '''Cut''' and then '''Paste''' actions if you need them to occur in a different order.</big><br />
<br />
#Select the action to cut.<br />
#Choose the new position for the action you just cut. The desired position could also be the end of the action list by choosing to paste the action before '''**End of Actions**''', which would paste the cut action at the end of the action list.[[File:Rule-5 cut action.png|none|thumb|600x600px]][[File:Rule-5.0 Paste Action Before v2.png|none|thumb|600x600px]][[File:Rule-5 action position after paste action.png|none|thumb|600x600px]]<br />
<br />
====<big>Delay Actions and Delay Actions per Mode</big>====<br />
<big>All actions can be delayed, effectively pausing the action execution for a specified amount of time. A</big><big>ctions</big> <big>may</big> <big>also be delayed for a period of time that is dependent on the current '''Mode''' by using '''Delay Actions Per Mode'''.</big><br />
<br />
<big>'''Delay per Action'''</big><br />
<br />
<big>Each action you define can have an optional delay. These delays can be defined with hours, minutes, and seconds. Seconds can have decimal fractions, allowing millisecond resolution. In a rule, delays can have the '''option to be cancelled''' in the event of a change of rule truth. It is important to realize that the delay assigned to an individual action affects only that action, and not subsequent actions. Any subsequent action is executed immediately after the delayed action starts its delay timer, and does not wait for that delay timer to run. When the delay timer expires, the delayed action is executed (unless the delay was cancelled).</big><br />
[[File:Rule Machine Delay per action.png|none|thumb|600x600px]]<br />
<big>'''Delay all Actions'''</big><br />
<br />
<big>It is also possible to delay all actions (also with optional cancel). The script of actions runs sequentially when the rule runs, with each action happening in order. Actions with delays start their timer, which can vary for each action, and '''<u>the next action in order</u>''' runs. By using '''Delay Actions''', the entire script can be ''paused'' by a delay.</big><br />
<br />
<big>'''Delay Actions per Mode'''</big><br />
<br />
<big>Delay Actions can also be specified on a per mode basis, so that the time the script is paused, varies according to the current mode.</big><br />
===<big>Rule-5.0 Conditional Actions and Logical Expressions</big>===<br />
<big>In Rule Machine, '''IF-THEN-ELSE-ENDIF''' conditional blocks can be nested. The user interface utilizes textual indentation to help guide you in keeping track of which '''IF-THEN-ELSE-ENDIF''' block you are currently adding actions to. The user is responsible for completing each level of nested '''IF-THEN''' blocks.</big><br />
<br />
<big>The condition of an '''IF-THEN''' or '''ELSE-IF''' Action can be a full logical expression built-up from individual conditions, and the logical operators '''AND''', '''OR''', '''XOR''', and '''NOT'''. Parenthesized sub-expressions are also possible. This is the same user interface of the former rule portion found in Rule or Triggered Rule from Rule-3.0. An individual '''Condition''' can be created ''on the fly'' while defining a logical expression. Every such '''Condition''' is kept in the list of available Conditions. This list of available conditions is present in the '''Define Actions''' page. The user interface then allows Creating, Editing and Deleting conditions. If a condition is edited, those changes will be reflected where it is used in an '''IF-THEN''' or '''ELSE-IF''' conditional action.</big><br />
<br />
<big>This combination of nested '''IF-THEN''' blocks and full logical expression for each '''IF-THEN''' and '''ELSE-IF''', allows creativity for rules in Rule-5.0 that is limited only by your imagination. To help you with complex logic structures, new actions are available.</big><br />
<br />
#<big>Exit Rule - With Exit Rule the execution of '''Actions''' for that rule will stop, irrespective of what order in the rule it exists.</big><br />
#<big>Pending Delays are not cancelled, and current Repetitions are not stopped by Exit Rule, but these can be managed separately if needed with '''Stop Repeating Actions''', '''Cancel Rule Timers''', and '''Cancel Delayed Actions''', where appropriate.</big><br />
<br />
====<big>Automatic Condition Creation</big>====<br />
<big>When '''Event Triggers''' are defined, corresponding conditions are created for most types. Some conditions, like '''Button''', '''Certain Time''', etc, do not have a ''state'' and so have no corresponding condition. These created conditions are available in the '''Define Actions''' page for use in '''Conditional Actions''', are available for use in other Actions, and can be edited.</big><br />
<br />
====<big>IF-THEN-ELSE</big>====<br />
<big>You can introduce conditional execution of actions using the following method.</big><br />
IF (condition) THEN <br />
some actions...<br />
ELSE-IF (condition) THEN <br />
some actions...<br />
ELSE <br />
some actions...<br />
END-IF <br />
<big>'''IF-THEN''' and '''ELSE-IF''' both accept a logical expression as described above and '''IF-THEN-ELSE''' may also be nested. If the expression on the '''IF''' portion is True, then those actions following '''IF''' and before any '''ELSE-IF''' or '''ELSE''' statements will be carried out. If the expression is False, then those actions are skipped, and the '''ELSE''' portion or '''ELSE-IF''' are carried out. In the case of '''ELSE-IF''', its expression will be tested, and the following Actions that follow it will either run or will not run, depending on the result of the evaluation. There can be as many '''ELSE-IF''' sections as you need, and the '''ELSE-IF''' and '''ELSE''' portions are both are optional. '''END-IF''' is also optional, and if omitted means all remaining actions are part of the preceding '''IF-THEN''', '''ELSE-IF''' or '''ELSE'''. However, for good rule structure, just a sentence should have a period at the end, it is strongly recommended that you use END-IF to complete an '''IF-THEN-ELSE''' as a regular practice.</big><br />
===<big>Repeat Actions</big>===<br />
<big>Portions of, or all of the script of an '''Action''' can be repeated periodically, but you must specify the time interval for the repetition. Be careful not to make this interval too short, as you can consume your hub CPU resources by repeating too quickly. You can select any number of iterations if desired, but some method to stop the repetition is required. When a '''Repeat Actions''' is introduced to the script, any action before '''END-REP''' will be repeated. Only the Actions between '''Repeat Actions''' and '''END-REP''' will be repeated. Actions following '''END-REP''' will run only once the repetition has stopped. There is an optional '''Stop for a Repeat Action''' choice and if selected, then '''Stop Repeating Actions''' will stop this repetition. Using '''Cancel Rule Timers''' from either the current rule or another rule, will stop '''<u>all Repeat Actions</u>''', irrespective of which Stop selection is used.</big><br />
Repeat Actions<br />
some actions...<br />
END-REP<br />
<big>A '''Repeat Actions''', like any action, can have a condition specified. If the condition is False, the '''Repeat Actions''' block will not be executed. If the condition becomes False during repetition, the repetition will be stopped (with the exception of when '''Repeat N Times''' is selected). This provides three features well known to computer programmers.</big><br />
<br />
#<big>While-loop - The '''while-loop''' runs only if the condition is true, and stops if it is false.</big><br />
#<big>For-loop - A '''for-loop''' runs for a fixed number of times, but if a condition exists, it will only start that iteration if the condition is true; The condition is not retested during iteration.</big><br />
#<big>Repeat-until loop - A repeat-until loop runs until a condition becomes true, running at least once.</big><br />
<br />
'''<big>Examples:</big>'''<br />
<br />
''<big>While loop - repeat while the condition is True:</big>''<br />
IF (condition) Repeat Actions<br />
some actions...<br />
END-REP<br />
''<big>For loop (repeat n times):</big>''<br />
Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Conditional For loop (repeat n times if condition is True):</big>''<br />
IF (condition) Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Repeat-Until loop:</big>''<br />
Repeat Actions with Stop selected<br />
some actions<br />
IF (condition) Stop Repeating Actions<br />
END-REP<br />
<big>'''Repeat Actions''' cannot be nested. '''END-REP''' is optional, and if omitted, all actions after '''Repeat Actions''' will be repeated.</big><br />
<br />
*<big>'''Note''': The '''END-REP''' does not have anything to do with the when a '''Repeated Action''' will stop repeating, it merely marks the end of the list of actions to be repeated. If you use '''Repeat These Actions''' without specifying '''N Times''' (for loop), and without a '''Condition''' (while loop), and also without a '''Conditional Stop''' or a '''Stop on Truth Change''' (for rules only), that means it should repeat <u>forever</u>, and that is probably not what you want to have happen. In that case, some other rule would need to cause the repetition to stop.</big><br />
<br />
===<big>Wait for Events and Wait for Conditions</big>===<br />
<big>'''Wait for Events''' and '''Wait for Conditions''' may be using with Conditional Actions and in a '''Simple Conditional Action'''. Additionally, '''Wait for Conditions''' allows for full logical expression with operators '''AND''', '''OR''', or '''XOR.''' If the conditions are true, no wait occurs, otherwise the rule execution is paused until the conditions are met.</big> <big>Both '''Wait for Events''' and '''Wait for Conditions''' have the option to select a '''Timeout''' period. Multiple events can be defined to cause the Wait to end. In effect, this introduces another trigger-like capability into the Actions. There is also an event type specifically for '''Wait for Events''' named '''Elapsed Time'''. When the '''Elapsed Time''' expires, the wait will be over, irrespective of other events it may be waiting for. Pending '''Wait for Events''' and '''Wait for Conditions''' will be cancelled each time a rule is triggered, and can be also cancelled by another rule with '''Stop Rule Actions''', or by a '''Cancel Wait''' action (which presumably would have been part of a Delayed Action).</big> <br />
<br />
<big>'''Wait for Conditions''' also has an option to use '''Duration''' instead of a '''Timeout''' period, allowing you to specify an amount of time that the Conditions must remain continuously true for the Wait to conclude. This is useful for many automations that require the passage of some time in a certain state, such as a door that has been left open for more than 5 minutes. The rule would '''Wait for Conditions''' that the door is open for a duration of 5 minutes, Following the Wait period, you could have a notification action. If the door was subsequently closed before the 5 minute duration period, the Wait wouldn't conclude. If the door opened again, the pending Wait would then be canceled, and a new one begins. Only if the door is opened and remains open for 5 minutes would the Wait conclude, and the notification be sent.</big><br />
[[File:Wait for conditions example.png|none|thumb|600x600px]]<br />
<br />
*<big>'''NOTE:''' In cases where a rule’s trigger event is closely related to the Conditions, such as in the above example of a door remaining open, two subscriptions will fire. One subscription will be for the '''Trigger''', and one for the pending Wait. The trigger will win, thus canceling the pending wait, but if logging is enabled you will find both outcomes of the event in the logs. It is important to <u>never use</u> a *changed* trigger with '''Wait for Conditions''' on a related event, since it would result in a re-trigger after every event related to the Conditions, and the Wait would never conclude because would be cancelled by the *changed* trigger.</big><br />
<br />
===<big>Custom Actions</big>===<br />
<big>A Custom Action allows you to select a device, and send any of the commands that device supports along with parameters it may take. '''Custom Actions''' are created within your actions and they are specific to the rule where created.</big><br />
<br />
=== <big>Hub Variables</big> ===<br />
<big>Hub Variables are a setting for creating very efficient variables directly in the hub for use in other apps, not just in Rule Machine, as is the case with Local Variables. There are five types of Hub Variables available - '''Number''', '''Decimal''', '''String''', '''Boolean''' and '''DateTime'''.</big><br />
<br />
<big>Each Hub Variable can have an associated '''Connector'''. A Connector is a virtual device linked to the Hub Variable. When the Hub Variable value changes, so does the Connector value, and vice versa. When the Connector device is set to a different value, the corresponding Hub Variable is set to that value. Connectors can be used in any app. The aforementioned '''DateTime''', allows '''both''' Date and Time to be set. The use of Date has very limited applicability for now, specifically in the Certain Time trigger for Rule 5.0, where triggering on a specific date is possible; by using a '''DateTime''' connector, that can be a variable Date and Time.</big><br />
<br />
<big>Managing '''Hub Variables''' can be found in Settings, allowing for the creation of a Hub Variable, changing its value, creating a '''Connector''' for it, and removing it. If a Hub Variable is in use by an app, the name of the Hub Variable is shown in '''<span style="color: red;;">Orange</span>''', and selecting that shows the apps it is in use by. When a Connector is created, the type of Connector is shown in '''<span style="color: red;;">Blue</span>''', and selecting that connector opens a new tab with the Connector device settings page. The value of the variable can be changed by selecting the '''<span style="color: red;;">Purple</span>''' text in the Value column. When a Connector exists, the variable value is shown with the selected attribute for the Connector.</big><br />
<br />
<big>'''Example:''' A Boolean variable for which a '''Switch Connector''' is created, will show '''On''' or '''Off''' as the possible values, rather than '''True''' or '''False'''.</big><br />
<br />
* <big>To '''remove a Connector''', open the device page for the Connector and remove it from that page. If the Connector is in use by any apps, be sure to clean up those apps first; the warning to do so is presented to prevent mistakes.</big><br />
<br />
* <big>To '''remove a Hub Variable''', click on Delete for that variable. If the variable is in use by an app, an appropriate warning will be provided, and those apps should be cleaned up before deleting the Hub Variable.</big><br />
<br />
===<big>Run Actions from the Rule-5.0 User Interface</big>===<br />
<big>When you first create a new rule, you are creating a child app of the parent Rule Machine app, and therefor you must select '''Done''' on the main page to install the Rule-5.0 rule. If you re-open the rule, its actions can be run by hitting '''Run Actions''' button. If you change the '''Trigger Events''' in any way, you must either select '''Done''' or the '''Update Rule''' button.</big><br />
<br />
===<big>Rule Logging</big>===<br />
<big>You can select which types of logging you want to see in [https://docs.hubitat.com/index.php?title=Logs Logs]. This is a very good way to determine exactly what a rule is doing.</big><br />
===<big>List of Actions</big>===<br />
<pre> Conditional Actions <br />
IF (conditions) THEN<br />
ELSE-IF (conditions) THEN<br />
ELSE<br />
END-IF<br />
Simple Conditional Action<br />
Control Switches, Push Buttons <br />
Turn switches on<br />
Turn switches off<br />
Toggle switches<br />
Flash switches<br />
Set switches per mode<br />
Push a button<br />
Push a button per mode<br />
Set Dimmers and Bulbs <br />
Set dimmer level<br />
Toggle dimmer level<br />
Adjust dimmer level<br />
Set dimmer level per mode<br />
Fade dimmer level over time<br />
Stop dimmer fade<br />
Start raising dimmer level<br />
Start lowering dimmer level<br />
Stop changing dimmer level<br />
Set color and level<br />
Toggle color and level<br />
Set color and level per mode<br />
Set color temperature and level<br />
Toggle color temperature and level<br />
Set color temperature and level per mode<br />
Change color temperature over time<br />
Stop changing color temperature<br />
Activate Scenes, Adjust Shades or Fans <br />
Activate scenes<br />
Activate scenes per mode<br />
Open shades<br />
Close shades<br />
Set shade position<br />
Set fan speed<br />
Cycle fans<br />
Control HSM, Garage Doors, Locks or Valves <br />
Arm/Disarm Hubitat® Safety Monitor<br />
Open garage door<br />
Close garage door<br />
Lock locks<br />
Unlock locks<br />
Open valves<br />
Close valves<br />
Control Thermostats or Thermostat Scheduler <br />
Set thermostats<br />
Set Thermostat Scheduler<br />
Send, Speak, or Log a Message, Send HTTP Request <br />
Send or Speak a Message<br />
Log a Message<br />
Send HTTP Get<br />
Send HTTP Post<br />
Control Music Player, Volume, Sounds<br />
Control Music Player<br />
Set Volume<br />
Mute<br />
Unmute<br />
Sound Tone<br />
Sound Chime<br />
Control Siren<br />
Set Mode or Variables, Run Custom Action <br />
Set Mode<br />
Run Custom Action<br />
Write to local file<br />
Append to local file<br />
Delete local file<br />
Set Private Boolean, Run/Cancel/Pause Rules <br />
Set Private Booleans True<br />
Set Private Booleans False<br />
Run Rule Actions<br />
Cancel Rule Timers<br />
Pause Rules<br />
Resume Rules<br />
Capture/Restore, Device Refresh or Polling <br />
Capture Devices<br />
Restore Devices<br />
Refresh devices<br />
Poll devices<br />
Start Z-Wave poll on switches<br />
Stop Z-Wave poll on switches<br />
Start Z-Wave poll on dimmers<br />
Stop Z-Wave poll on dimmers<br />
Delay or Repeat Actions, Wait <br />
Delay Actions<br />
Delay Actions Per Mode<br />
Cancel Delayed Actions<br />
Repeat Actions<br />
END-REP<br />
Stop Repeating Actions<br />
Wait for Events<br />
Wait for Condition<br />
Cancel Wait<br />
Exit Rule<br />
Comment</pre><br />
<br />
===<big>Export, Import or Clone of Rule Machine Rules</big>===<br />
<big>Select this option to allow export of your Rule Machine rules for import to another hub, or to clone an existing rule as a base from which to start a new rule.</big><br />
[[File:Export Import and Clone RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/99/Export_Import_and_Clone_RM_rule_v2.png<br />
]]<br />
<br />
====<big>Export a Rule</big>====<br />
<br />
#<big>Select a single or multiple rules for '''Export'''. You may export multiple rules to a single file, and still have the option to select which rules to later '''Import'''.</big>[[File:Export Selected RM rules v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/00/Export_Selected_RM_rules_v2.png ]]<br />
#<big>Press the '''Download''' button to save the file to your local drive in the designated file download location for your browser. Typically this will be your '''Downloads''' folder.</big>[[File:Export RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/52/Export_RM_rule_v2.png ]]<br />
<br />
====<big>Restore or Import a Rule</big>====<br />
<big>You may choose to '''Restore''' a rule instead of using the '''Import''' option. This is most appropriate for instances where you want to bring a Rule Machine rule into your hub database, but you do not want to change the name or the devices used in the rule. If you instead choose to '''Import''', the process will pause to allow the rule to be renamed, and the devices used in the rule to be substituted with other devices installed on your hub before completing the import process.</big><br />
<br />
'''<big>Restore</big>'''<br />
<br />
#<big>To '''Restore''', select the saved file you previously exported, then press the '''Restore''' button.</big>[[File:Restore RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/6b/Restore_RM_rule.png ]]<br />
<br />
'''<big>Import</big>'''<br />
<br />
#<big>To '''Import''', select the saved file you previously exported and press the '''Import...''' button.</big>[[File:Import RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/c/c9/Import_RM_rule.png ]]<br />
#<big>Select the rules for import.</big>[[File:Selected RM rule for import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/16/Selected_RM_rule_for_import.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big><br />
#*<big>'''NOTE:''' If you '''Import''' a rule to another hub without selecting replacement devices, any existing devices with those same names will be used in the imported rule. If the devices do not exist, virtual devices with those same names will automatically be created. This is very helpful when you need to replace devices of an imported rule, but do not yet have the devices available that will replace them.</big>[[File:Rename and change RM devices before import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/da/Rename_and_change_RM_devices_before_import.png ]]<br />
#<big>When ready to import, press the '''Import ['''rule name''']''' button.</big>[[File:Rule Machine Import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/1a/Rule_Machine_Import.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been imported.</big>[[File:RM Import confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/9c/RM_Import_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps.</big>[[File:Show imported Rule-5 rules.png|none|thumb|600x600px]]<br />
#*<big>'''<span style="color: red;;">IMPORTANT!</span>''' - If you import rules that contain a Private Boolean, it must be manually adjusted after importing the rule. In the following example, you will see that an imported rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]][[File:Imported rule with PB not pointing anywhere.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d4/Imported_rule_with_PB_not_pointing_anywhere.png ]]<br />
<br />
====<big>Clone a Rule</big>====<br />
<br />
#<big>To '''Clone''' a rule, select the rule from the list of available Rule Machine rules on your hub and press the '''Clone''' button.</big>[[File:Select Rule Machine rule for clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/2d/Select_Rule_Machine_rule_for_clone.png ]][[File:Initiate Rule Machine cloning.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/68/Initiate_Rule_Machine_cloning.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big>[[File:Rename and change RM devices before clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/dd/Rename_and_change_RM_devices_before_clone.png ]]<br />
#<big>When ready to proceed, press the '''Clone ['''rule name''']''' button.</big>[[File:Clone Rule Machine rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/55/Clone_Rule_Machine_rule.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been cloned.</big>[[File:RM rule clone confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/46/RM_rule_clone_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps. If you did not change the name, the rule will be imported under the same name, but it will have the word '''clone''' added to the end.</big>[[File:Show cloned Rule-5 rule.png|none|thumb|600x600px]]<br />
#*<big><span style="color: red;;">'''IMPORTANT!'''</span> If you '''Clone''' rules that contain a Private Boolean, it must be manually corrected after cloning the rule. In the following example, you will see that a cloned rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]] [[File:Cloned rule with incorrect PB setting.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/48/Cloned_rule_with_incorrect_PB_setting.png ]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%C2%AE_Dashboard&diff=5187Hubitat® Dashboard2021-08-09T15:29:31Z<p>Doug: /* Create A New Dashboard */</p>
<hr />
<div>{{DISPLAYTITLE:Hubitat Dashboard}}{{Top}}<br />
<br />
<big>Hubitat Dashboard app is a powerful and fast, grid-based tile solution for local and remote access. You can quickly create highly customizable Dashboards to monitor and control your devices from a phone, tablet or desktop. Dashboards can be assigned to specific users, allowing a custom layout for a single or multiple individuals. A convenient QR code may be captured by mobile devices to grant access for the assigned Dashboards on a per user basis.</big><br />
===<big>Installing Hubitat Dashboard</big>===<br />
<br />
#<big>From the sidebar of your hub, select '''Apps''' and press the '''Add Built-In App''' button.</big>[[File:Install Built-In App 2.0.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Install_Built-In_App_2.0.png ]]<br />
#<big>Choose the '''Hubitat Dashboard''' from the list of Hubitat Elevation Built-In Apps</big>.[[File:Install Hubitat Dashboard v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/e/ea/Install_Hubitat_Dashboard_v2.png ]]<br />
<br />
===<big>Create A New Dashboard</big>===<br />
<br />
#<big>Choose '''Create A New Dashboard.'''</big>[[File:Dashboard v4 Create New.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/2d/Dashboard_v4_Create_New.png ]]<br />
#<big>Select the devices you wish to use authorize for use in your Dashboard. To allow all devices to be used in a Dashboard, select the '''Toggle All On/Off''' option to allow any device on your hub to be authorized. Limiting the number of authorized devices will help speed up the loading of Dashboards.</big><br />
#*<big>'''NOTE:''' You must select a device before you can use them in a Dashboard. If you do not choose devices to use in your Dashboard, you will receive the warning '''<span style="color: red;;">No Device Authorized</span>''' when you attempt to '''Add A Tile''' to your dashboard.</big>[[File:Dashboard v4 choose devices.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/b/b1/Dashboard_v4_choose_devices.png ]]<br />
#<big>Once you create your Dashboards, Hubitat<sup>®</sup> Dashboard '''Child apps''' can be found listed under Parent app settings</big><br />
#<big>Dashboard '''Child apps''' are the individual Dashboards, and Hubitat<sup>®</sup> Dashboard is the '''Parent app'''. Dashboard Direct Local and Cloud URL links may be copied and opened from the Dashboard Child app settings. These URLs can be bookmarked to allow easy access to your Dashboards. '''Local LAN Link''' is accessible inside your home, while on the ''same IP network'' as your hub. '''Cloud Links''' are remotely accessible URLs that allow secure access to your Dashboard from anywhere.</big>[[File:Dashboard v4 parent app settings.png|none|thumb|735x735px|link=https://docs.hubitat.com/images/2/27/Dashboard_v4_parent_app_settings.png ]]<br />
<br />
====<big>Legacy Dashboard Links</big>====<br />
<big>Use these links to keep the former dashboard link behavior prior to hub platform version 2.2.4.x</big><br />
<br />
<big>'''<span style="color: red;;">WARNING</span>''': Using Legacy Dashboard Links may allow access to all dashboards installed on your hub.</big><br />
[[File:Dashboard v4 Legacy Links.png|none|thumb|650x650px|link=https://docs.hubitat.com/images/7/7a/Dashboard_v4_Legacy_Links.png<br />
]]<br />
<br />
====<big>Advanced Options</big>====<br />
<br />
*<big>Change how fast the Dashboard should refresh via Cloud and Local links.</big><br />
*<big>You can require that a PIN must entered before the specific Dashboard will load.</big><br />
*<big>You can require that a PIN must be entered before a Hubitat Safety Monitor command, such as Arm or Disarm can be sent.</big><br />
*<big>You may restrict Modes from being changed in the specific Dashboard until a PIN is entered.</big><br />
*<big>Access for a specific Dashboard via '''Cloud Links''' and '''Local Links''' can be disabled.</big><br />
*<big>You may set read only access, thus preventing any changes to a specific Dashboard while this option is enabled.</big><br />
*<big>Access to '''Dashboard Direct Local and Cloud''' links of a specific Dashboard can be revoked, requiring that a new link be copied.</big><br />
**<big>'''NOTE:''' If you press '''Reset Access Token''' in a Dashboard child app settings page, the Local and Cloud '''Dashboard Direct Links''' for that particular Dashboard will be invalid and you will need to repair your bookmarks with new '''Dashboard Direct Links'''. The '''Dashboard Direct Links''' of other Dashboards, '''Dashboard Menu''' links, and '''Per User Dashboard''' links will not be affected.</big>[[File:Dashboard v4 child app settings v3.png|none|thumb|1203x1203px|link=https://docs.hubitat.com/images/e/ef/Dashboard_v4_child_app_settings_v3.png ]]<br />
<br />
===<big>Dashboard Menu and Links</big>===<br />
<br />
#<big>If you need to copy links to the Local and Cloud Dashboard Menus, or links to individual Dashboards, you will find them conveniently located under '''Dashboard Menu and Links'''.</big>[[File:Dashboard v4 Menu and Links.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/a/ab/Dashboard_v4_Menu_and_Links.png ]]<br />
#<big>Right-click, or tap and hold to copy the links. Alternatively, you can open the links and copy them from a browser address bar.</big>[[File:Dashboard v4 Menu and Links setup.png|none|thumb|730x730px|link=https://docs.hubitat.com/images/f/fe/Dashboard_v4_Menu_and_Links_setup.png ]]<br />
<br />
====<big>Dashboards Menu</big>====<br />
<br />
#<big>You can bookmark the Dashboards Menu links for easy access to all of your Dashboards. The example below shows Local Dashboards indicated by the house icon.</big>[[File:Dashboard v4 Local Dashboard Menu v2.png|none|thumb|658x658px|link=https://docs.hubitat.com/images/3/39/Dashboard_v4_Local_Dashboard_Menu_v2.png ]]<br />
#<big>The Cloud Dashboards Menu is indicated by a cloud icon and does not include the capability to add new dashboards.</big>[[File:Dashboard v4 Cloud Dashboard Menu.png|none|thumb|658x658px|link=https://docs.hubitat.com/images/5/5b/Dashboard_v4_Cloud_Dashboard_Menu.png ]]<br />
<br />
===<big>Localization Options</big>===<br />
<br />
#<big>Select '''Localization Options''' to choose the primary language for the '''Getting Started''' dialogue and the '''Dashboard Editor'''. You can build Dashboards using different languages by selecting the '''Localization Options''' for creating new Dashboards. Once set, the language specified will be the default for new Dashboards. If you need to change the Dashboard Editor Localization language later, it can be set on a per Dashboard basis. See the '''Dashboard Editor Settings''' section for more information.</big>[[File:Dashboard v4 Localization Options.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/8/87/Dashboard_v4_Localization_Options.png ]][[File:Dashboard v4 Localization setup.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/e/e1/Dashboard_v4_Localization_setup.png ]]<br />
<br />
===<big>Per User Dashboards</big>===<br />
<br />
#<big>You can restrict access for a particular Dashboard to specific users. A convenient QR code may be captured by mobile devices to grant access for the assigned Local and Cloud Dashboards on a per-user basis.</big>[[File:Dashboard v4 Per User Dashboards.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/a/a0/Dashboard_v4_Per_User_Dashboards.png ]]<br />
#<big>Select '''New''' to add a New User.</big>[[File:Dashboard v4 New user - per User Dashboard.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/a/a3/Dashboard_v4_New_user_-_per_User_Dashboard.png ]]<br />
#<big>Type a name for the user and press the '''Add New User''' button.</big>[[File:Dashboard v4 Add Name - per User Dashboard.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d7/Dashboard_v4_Add_Name_-_per_User_Dashboard.png ]]<br />
#<big>Select '''Add Dashboard to User'''.</big>[[File:Dashboard v4 Add Dashboard to User.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/7/77/Dashboard_v4_Add_Dashboard_to_User.png ]]<br />
#<big>From the drop-down menu, choose the Dashboard you want the User to be able to access. '''NOTE:''' Each User and Dashboard combination assigned will have a unique access token in the URL. If you need a user to have access to multiple Dashboards, you will need to share the '''Dashboard Menu Links''' with them.</big>[[File:Dashboard v4 Pick Dashboard for User.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/e/e3/Dashboard_v4_Pick_Dashboard_for_User.png ]]<br />
#<big>Using a mobile device, you can capture the QR code for Dashboard Local and Cloud links, or you can copy the URL from the link above each QR code.</big>[[File:Dashboard v4 Local and Cloud QR.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/3/30/Dashboard_v4_Local_and_Cloud_QR.png ]]<br />
<br />
===<big>Dashboard Advanced Options</big>===<br />
<br />
*<big>'''Allow new Dashboards to be created from Dashboard Menu when local? -''' This option enables you to control if new Dashboards are allowed to be created from the Dashboard Menu when accessed from a local connection.</big><br />
*<big>'''Remove Hubitat Dashboard''' - Selecting this button will remove the Hubitat Dashboard parent app and all of the associated Dashboards child apps.</big><br />
*<big>'''Reset Access Token''' in the Dashboard parent app settings will generate new a new token for the Local and Cloud '''Dashboard Menu''' links. Existing '''Dashboard Menu''' links will be invalid and you will need to repair your bookmarks with new '''Dashboard Menu''' links. The '''Dashboard Direct Links''' and '''Per User Dashboard''' links will not be affected.</big>[[File:Dashboard v4 Advanced Parent Options.png|none|thumb|590x590px|link=https://docs.hubitat.com/images/3/38/Dashboard_v4_Advanced_Parent_Options.png ]]<br />
<br />
===<big>Getting Started</big>===<br />
<br />
#<big>Once Dashboards have been created, choose the local link to open the Dashboard in a new browser window or tab.</big><br />
#<big>You will first see the '''Getting Started''' dialogue window with helpful instructions to assist you in building a Dashboard.</big>[[File:Dashboard v4 Builder dialogue.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/15/Dashboard_v4_Builder_dialogue.png ]]<br />
#<big>You can press the '''Auto Fill Grid 6 x 1''' button and devices will be automatically added to the Dashboard with a default tile template. '''Auto Fill Grid 6 x 1''' will automatically optimize the default Grid Size and build a Dashboard specifically for your device and the web browser it was initiated from. It is recommended to use a browser on the device you intend to normally use with Hubitat Dashboards. Alternatively, you may simply select the '''Manually Add Tiles''' button, or press the '''X''' at the top right to close the Dashboard Builder and start adding tiles without assistance.</big><br />
<br />
====<big>Dashboard Builder</big>====<br />
<br />
#<big>Selecting the '''Dashboard Builder''' in the header bar as shown below allows creating a Dashboard based on the devices you have authorized and their specific ''attributes''. Select which device type attributes you want added and press the '''Build My Dashboard''' button to create a quick and easy Dashboard with device type groups that match the selected attributes.</big><br />
#<big>'''Dashboard Builder''' will automatically optimize the default Grid Size and build a Dashboard specifically for your device and the web browser it was initiated from. It is recommended to use a browser on the device you intend to normally use with Hubitat Dashboards.</big>[[File:Dashboard v4 Dashboard Builder content.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/09/Dashboard_v4_Dashboard_Builder_content.png ]]<br />
<br />
===<big>Add A Tile</big>===<br />
<br />
#<big>Select the '''+''' icon in the top right to open the '''Add A Tile''' dialog.</big>[[File:Dashboard v 4 Editor - Add A Tile.png|none|thumb|492x492px|link=https://docs.hubitat.com/images/c/c6/Dashboard_v_4_Editor_-_Add_A_Tile.png ]]<br />
#<big>You can change the tile '''Width''' and '''Height''' to set how big the tile will be.</big><br />
#<big>'''Pick a Device''', then '''Pick a Template''', and finally set the '''Options''' for that template.</big>[[File:Dashboard v4 Add A Tile.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d5/Dashboard_v4_Add_A_Tile.png ]]<br />
#<big>Press the '''Add Tile''' button and you will see the tile added to your Dashboard in the spot you selected. The Grid will change to gray in that spot where the Dashboard now has a tile.</big>[[File:Dashboard v4 Add Tile button.png|none|thumb|386x386px|link=https://docs.hubitat.com/images/0/00/Dashboard_v4_Add_Tile_button.png ]]<br />
<br />
===<big>Edit Tile</big>===<br />
<br />
#<big>You can edit any tile by clicking the 3 dot menu in the top right of any tile. This will open an editing window and allow you to move the tile around on the grid by pressing the arrow buttons or by selecting the position in the grid layout where you want this tile to move on the Dashboard.</big>[[File:Dashboard v4 Edit A Tile 3 dot.png|none|thumb|586x586px|link=https://docs.hubitat.com/images/c/cd/Dashboard_v4_Edit_A_Tile_3_dot.png ]]<br />
#<big>You can quickly jump between editing of tiles by using the back and forward buttons in the header bar to either side of '''Edit Tile ID:'''</big><br />
#<big>You may change the '''Device''', '''Template''' or any '''Options''' for the tile.</big>[[File:Dashboard v4 Edit a Tile.png|none|thumb|575x575px|link=https://docs.hubitat.com/images/3/37/Dashboard_v4_Edit_a_Tile.png ]]<br />
#<big>Selecting '''History''' in the header bar will open up a window with a list of activities for that device from the event table. Selecting the '''Tile''' link in the header bar will return you to the '''Tile Editor'''.</big>[[File:Dashboard v4 Tile History.png|none|thumb|576x576px|link=https://docs.hubitat.com/images/5/5d/Dashboard_v4_Tile_History.png ]]<br />
#<big>If you want to remove the tile from Dashboard, press the '''Delete Tile''' button.</big>[[File:Dashboard v4 Remove Tile.png|none|thumb|375x375px|link=https://docs.hubitat.com/images/3/30/Dashboard_v4_Remove_Tile.png ]]<br />
<br />
===<big>Refresh Dashboard</big>===<br />
<br />
#<big>Press the green checkmark to refresh your Dashboard.</big><br />
#*<big>'''NOTE:''' If you do not have any tiles added to your Dashboard, selecting the refresh checkmark will reopen the '''Getting Started''' dialogue.</big>[[File:Dashboard v 4 Editor - Refresh.png|none|thumb|492x492px|link=https://docs.hubitat.com/images/7/72/Dashboard_v_4_Editor_-_Refresh.png ]]<br />
<br />
===<big>Dashboard Editor Settings</big>===<br />
<br />
#<big>Selecting the gear icon in the top right opens up the '''Editor''' '''Settings''' for this Dashboard.</big>[[File:Dashboard v 4 Editor - Settings.png|none|thumb|492x492px|link=https://docs.hubitat.com/images/7/7e/Dashboard_v_4_Editor_-_Settings.png ]]<br />
#<big>Available links in the header bar include:</big><br />
#*'''<big>Grid</big>'''<br />
#*'''<big>Options</big>'''<br />
#*'''<big>Templates</big>'''<br />
#*'''<big>Advanced</big>'''<br />
<br />
====<big>Grid</big>====<br />
<big>You can change the grid size (columns and rows), font size, icon size, grid gap, as well as how rounded the corners are for all tiles. You may also paste in a URL for a background image, or set a color using a custom HTML value for the background of the grid.</big>[[File:Dashboard v4 Editor Settings.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/3/37/Dashboard_v4_Editor_Settings.png<br />
]]<br />
====<big>Options</big>====<br />
<big>You can change the options for how your Dashboard will display or hide information.</big><br />
<br />
*<big>'''Localization''' - You can modify the language of the '''Dashboard Editor''' and '''Getting Started''' dialogue for this specific Dashboard. To set the default language for new Dashboards, see the '''Localization Options''' section above.</big><br />
*<big>'''Clock 12 Hour Mode (turn off for 24 hour time)''' - Choose between 12 hour or 24 hour time display for any clock template or history.</big><br />
*<big>'''Date Format -''' Switch between '''Month/Day/Year''' or '''Day/Month/Year''' formats.</big><br />
*<big>'''Cloud and LAN''' '''Refresh Intervals -''' Set these to determine how fast the Dashboard will poll to show updates on screen.</big><br />
**<big>'''NOTE:''' LAN Refresh interval adjustment is only needed when a Dashboard can’t connect via websocket. Under normal circumstances, connections over websocket should update instantly.</big><br />
*<big>'''Column Width and Row Height -''' Removing these values will auto fit tiles to the grid. Setting specific values will result in the Dashboard rendering tiles at fixed sizes, thus forcing the Dashboard to scroll when it overflows the browser window.</big><br />
*<big>'''Allow Logo Click -''' Disable this if you don’t want to use this option as a means to return to the Dashboard menu.</big><br />
*<big>'''Hide 3 dots -''' This will hide all the 3 dot menu at the top-right of each tile. You will need to re-enable the 3 dot menu if you want to edit tiles.</big><br />
**<big>'''NOTE:''' This does not make the tiles read only, and the option can still be set from inside the Dashboard App settings in the Hubitat Web Interface.</big><br />
*<big>'''Hide Tile Template Names -''' This allows you to remove the names that are at the top of most templates.</big><br />
*<big>'''Hide Icon Helper Text -''' Hides the text under each icon that indicates the attribute value.</big><br />
*<big>'''Hide Device History -''' Removes the option to view device history in the tile details area.</big><br />
*<big>'''Do Not Use Default Tile Colors -''' Turning this on will disable the default colors for templates.</big>[[File:Dashboard v4 Editor Options.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/29/Dashboard_v4_Editor_Options.png ]]<br />
<br />
====<big>Templates Color Editor</big>====<br />
<big>In this section you can change the Color, Background Color and Custom Icons for each state available for a template.</big>[[File:Dashboard v4 Template color editor.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/18/Dashboard_v4_Template_color_editor.png<br />
]]<br />
====<big>Advanced</big>====<br />
<br />
*<big>'''Layout -''' This allows you to copy and paste in layouts, or make direct edits to your options, layout, and custom colors. Quickly share custom colors or layouts using the code from this window.</big>[[File:Dashboard v4 Editor Advanced Layout.png|none|thumb|575x575px|link=https://docs.hubitat.com/images/e/ec/Dashboard_v4_Editor_Advanced_Layout.png ]]<br />
<br />
*<big>'''Devices -''' This allows you to see a list of authorized devices, current states and the history (if enabled) for each device. This is helpful to troubleshoot whether a device is reporting proper states.</big>[[File:Dashboard v4 Editor Advanced Device List.png|none|thumb|576x576px|link=https://docs.hubitat.com/images/6/6b/Dashboard_v4_Editor_Advanced_Device_List.png]]<br />
<br />
*<big>'''CSS''' - This is an advanced option which provides the ability to modify the Cascading Style Sheets of a Dashboard</big></div>Doughttps://docs.hubitat.com/index.php?title=List_of_Compatible_Devices&diff=5186List of Compatible Devices2021-07-26T21:10:20Z<p>Doug: </p>
<hr />
<div>{{Top}}<br />
<br />
<big>The table below lists devices compatible with Hubitat Elevation. You can sort the list by Brand Name, Protocol or Device Type to help you quickly find the device you are looking for. This list will be updated over time.</big> <br />
<br />
<big>Devices listed here are confirmed to have worked with Hubitat, but this does not mean the device will be guaranteed to work with Hubitat. Support cannot assist you with pairing devices with the hub. Building a proper mesh network with repeaters is required to make most Zigbee and Z-Wave™ devices work with Hubitat.</big> <br />
<br />
<big>Zigbee and Z-Wave devices require the correct drivers to connect and work properly with the hub. LAN and Cloud devices connect using the specific integration app listed and may require an additional bridge device to communicate.</big><br />
<br />
<big>While this list includes devices known by Hubitat to work, there are countless other devices users have running on their hubs. Visit our [https://community.hubitat.com/t/compatible-devices-wiki/465 Community Devices Page] to see other devices users have running on their hubs. Some of these devices use custom drivers, for which support comes from the custom driver author, not from Hubitat.</big> <br />
<br />
{| class="wikitable sortable"<br />
|+<br />
!Brand (Select link for join/reset instructions)<br />
!Device<br />
!Product Number<br />
!Device type<br />
!Protocol<br />
!Driver Name<br />
!Integration App<br />
!Additional Required Hardware<br />
|-<br />
|2GIG<br />
|700 Series Smart Thermostat<br />
|STZ-1<br />
|Thermostat<br />
|Z-Wave<br />
|Generic Z-Wave Plus Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ADT |<sup>ADT</sup>]]===<br />
|Zigbee Water Sensor|| ||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#AduroSmart |<sup>AduroSmart</sup>]]===<br />
|ERIA Motion Sensor|| ||Motion Sensor||Zigbee||ERIA Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#AduroSmart |<sup>AduroSmart</sup>]]===<br />
|ERIA Dimmer Switch|| ||Button Controller||Zigbee||ERIA Dimmer Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#AduroSmart |<sup>AduroSmart</sup>]]===<br />
|ERIA Contact Sensor|| ||Contact Sensor||Zigbee||ERIA Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|aërQ Temperature & Humidity Sensor<br />
|ZWA009<br />
|Temperature Sensor<br />
|Z-Wave<br />
|Aeotec aerQ<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|Siren 6||ZW164-A||Siren||Z-Wave||Aeotec Siren 6 New|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|Doorbell 6||ZW162-A||Doorbell||Z-Wave||Aeotec Siren 6 New|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Switch||ZW116||Switch||Z-Wave||Aeotec Nano Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Dual Nano Switch<br />
|ZW132<br />
|Switch<br />
|Z-Wave<br />
|Aeotec Dual Nano Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Switch||ZW139||Switch||Z-Wave||Aeotec Nano Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|WallMote Quad||ZW130||Button Controller||Z-Wave||Aeon WallMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Contact Sensor||DSB04100||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor Gen 2|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor 7 Series<br />
|DWS7<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor 7 Pro<br />
|AEOEZWA012<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor 7 Basic<br />
|<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Doorbell||ZW056||Doorbell||Z-Wave||Aeon Labs Doorbell|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Dry Contact Sensor||ZW097-A||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Dual Micro Switch<br />
|DSC17<br />
|Switch<br />
|Z-Wave<br />
|Aeotec Dual Micro Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Micro Switch G2||DSC26103||Switch||Z-Wave||Aeon Micro Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Home Energy Meter|| ||Energy Meter||Z-Wave||Aeon Home Energy Meter|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|LED Bulb 6 Multi-Color|| ||Bulb||Z-Wave||Aeotec LED Bulb 6 Multi-Color|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Micro Illuminator G2||DSC27103||Dimmer||Z-Wave||Aeon Micro Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Micro Motor Controllers|| ||Motor Controller||Z-Wave||Aeon Motor Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Minimote||DSA03202||Button Controller||Z-Wave||Aeon Minimote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Motor Controller|| ||Motor Controller||Z-Wave||Aeon Motor Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|MultiSensor 5|| ||Motion Sensor||Z-Wave||Aeon MultiSensor 6|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|MultiSensor 6||ZW100-A||Motion Sensor||Z-Wave||Aeon MultiSensor 6|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|MultiSensor 7<br />
|ZWA024-C<br />
|Motion Sensor<br />
|Z-Wave<br />
|Aeotec Multisensor 7<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|NanoMote One||ZWA003-A||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|NanoMote Quad||ZWA004-A||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Shutter<br />
|ZW141<br />
|Motor Controller<br />
|Z-Wave<br />
|Aeotec Nano Shutter<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Recessed Door Sensor||DS854-ZWUS||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Recessed Door Sensor Gen 5||ZW089||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Recessed Door Sensor 7<br />
|ZW187-A<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Siren||ZW080||Siren||Z-Wave||Aeon Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Smart Energy Switch<br />
|DSC06106<br />
|Outlet<br />
|Z-Wave<br />
|Aeote Smart Energy Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Smart Switch 6||ZW096-A02, ZW096AU, ZW110-B09||Outlet||Z-Wave||Aeotec Smart Switch 6|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|Smart Switch 7 US<br />
|ZWA023-A<br />
|Outlet<br />
|Z-Wave<br />
|Aeotec Smart Switch 7 US<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|TriSensor||ZWA005-A||Motion Sensor||Z-Wave||Aeotec TriSensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|WallMote||ZW129-A||Button Controller||Z-Wave||Aeon WallMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door Window Sensor 6|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door Window Sensor 7||ZWA008-A||Contact Sensor||Z-Wave||Aeotec Door/Window Sensor 7|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Range Extender 6|| ||Repeater||Z-Wave||Generic Z-Wave Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|LED Bulb 5||ZW098-A52||Bulb||Z-Wave||Aeon LED Bulb|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|LED Bulb 6 Multi-White|| ||Bulb||Z-Wave||Aeotec LED Bulb 6 Multi-White|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Range Extender||DSD37-ZWUS||Repeater||Z-Wave||Generic Z-Wave Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Range Extender 7<br />
|ZW189<br />
|Repeater<br />
|Z-Wave<br />
|Generic Z-Wave Repeater<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Garage Door Controller Gen 5|| ||Garage Door Controller||Z-Wave||Generic Z-Wave Garage Door Opener|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Water Sensor 7 Pro<br />
|ZWA019-C<br />
|Water Sensor<br />
|Z-Wave<br />
|Aeotec Water Sensor 7 Pro<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Dimmer||ZW111||Dimmer||Z-Wave||Aeotec Nano Dimmer|| ||<br />
|-<br />
|<br />
===<sup>AGSHome</sup>===<br />
|Motion Sensor<br />
|DP-ZGMD2<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===[[Amazon Echo Skill|<sup>Amazon</sup>]]===<br />
|Echo|| ||Voice Assistant||Cloud|| ||Amazon Echo Skill||<br />
|-<br />
|<br />
===<sup>alertMe</sup>===<br />
|Smart Plug<br />
|SPG100<br />
|Outlet<br />
|Zigbee<br />
|Iris V1 Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Alfred|<sup>Alfred</sup>]]===<br />
|Z-Wave Lock|| ||Lock||Z-Wave|| || ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#August |<sup>August</sup>]]===<br />
|August Pro Lock|| ||Lock||Z-Wave||August Pro Z-Wave Lock|| ||<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Smart Tunable GLS<br />
|AU-A1GSZ9CXE<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Smart Tunable GU10<br />
|AU-A1GUZBCX5<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Smart dimmable GLS Lamp<br />
|AU-A1GSZ9E/27<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|RGBW GLS<br />
|AU-A1GSZ9RGBWE<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|RGBW GU10<br />
|AU-A1GUZBRGBW<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Zigbee vintage GLS Lamp<br />
|AU-A1VGSZ5E/19<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Zigbee vintage G125 Lamp<br />
|AU-A1VG125Z5E/19<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Zigbee vintage ST64 Lamp<br />
|AU-A1VST64Z5E/19<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aurora|<sup>Aurora</sup>]]===<br />
|AOne Smart Remote<br />
|AU-A1ZBRC<br />
|Button Controller<br />
|Zigbee<br />
|Aurora Zigbee Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aurora|<sup>Aurora</sup>]]===<br />
|AOne Smart Plug-In Socket<br />
|AU-A1ZBPIAB<br />
|Outlet<br />
|Zigbee<br />
|Aurora Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aurora|<sup>Aurora</sup>]]===<br />
|AOne Smart Double Socket<br />
|AU-A1ZBDSS<br />
|Outlet<br />
|Zigbee<br />
|Aurora Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BeSense |<sup>BeSense</sup>]]===<br />
|360 Ceiling Sensor||IX32||Motion Sensor||Z-Wave||BeSense Motion Sensor Zwave Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BeSense |<sup>BeSense</sup>]]===<br />
|Door/Window Sensor||IM20||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BeSense |<sup>BeSense</sup>]]===<br />
|PIR Wall Sensor||IX30||Motion Sensor||Z-Wave||BeSense Motion Sensor Zwave Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BOSCH|<sup>Bosch</sup>]]===<br />
|PIR Motion Detector||ISW-ZPR1-WP13||Motion Sensor||Zigbee||Bosch Motion Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BOSCH|<sup>Bosch</sup>]]===<br />
|TriTech Motion Detector||ISW-ZDL1-WP11G||Motion Sensor||Zigbee||Bosch Motion Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Contact Sensor|| ||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Micro Door Sensor|| ||Contact Sensor||Zigbee||SmartSense Multi Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Motion Sensor|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Outlet Plug-in|| ||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Smart Outlet||4200-C||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Perl Thermostat|| ||Thermostat||Zigbee||Generic Zigbee Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#CREE |<sup>Cree</sup>]]===<br />
|Connected A-19 Bulb|| ||Bulb||Zigbee||Generic Zigbee Bulb|| ||<br />
|-<br />
|<br />
===<sup>CEL</sup>===<br />
|Cotet Z10 Range Extender<br />
|CGW-Z-0010<br />
|Repeater<br />
|Zigbee<br />
|Ikea TRADFRI Signal Repeater<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Denon</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Denon AVR|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Door Sensor||DMWD1||Contact Sensor||Z-Wave||Dome Door Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Door/Window Sensor Pro||DMDP1||Contact Sensor||Z-Wave||Dome Door/Window Sensor Pro|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Leak Sensor||DMWS1||Water Sensor||Z-Wave||Dome Leak Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Motion Sensor||DMMS1||Motion Sensor||Z-Wave||Dome Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Mouser||DMMZ1||Mouse Trap||Z-Wave||Dome Mouser|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|On/Off Plug||DMOF1||Outlet||Z-Wave||Dome On Off Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Siren||DMS01||Siren||Z-Wave||Dome Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Water Shutoff||DMWV1||Valve||Z-Wave||Dome Water Shut-Off|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Dome Range Extender||DMEX1||Repeater||Z-Wave||Dome Range Extender|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dragon Tech |<sup>Dragontech</sup>]]===<br />
|Outlet|| ||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eaton .28Cooper Wiring Devices.29 |<sup>Eaton</sup>]]===<br />
|Switch<br />
|RF9601<br />
|Switch<br />
|Z-Wave<br />
|Generic Z-Wave Smart Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eaton .28Cooper Wiring Devices.29 |<sup>Eaton</sup>]]===<br />
|Dimmer||RF9540, RF9640||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===[[Ecobee Integration|<sup>Ecobee</sup>]]===<br />
| || ||Thermostat||Cloud|| ||Ecobee Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Contact Sensor||DWZWAVE2.5-ECO||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|'''Ecolink'''<br />
|Chime + Siren<br />
|ISZW7-ECO<br />
|Siren<br />
|Z-Wave<br />
|Ecolink Chime+Siren<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Garage Door Tilt Sensor||TILT-ZWAVE2||Tilt Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|'''Ecolink'''<br />
|Garage Door Tilt Sensor<br />
|TILT-ZWAVE5<br />
|Tilt Sensor<br />
|Z-Wave<br />
|Ecolink Garage Door Tilt Sensor (TILT-ZWAVE5)<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Motion Sensor||PIRZWAVE2.5||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Siren||SC-ZWAVE5||Siren||Z-Wave||Ecolink Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Smoke/CO Audio Detector||FF-ZWAVE5||Smoke/CO Detector||Z-Wave||Ecolink Smoke/CO Audio Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Tilt Sensor||TILTZWAVE2.5||Tilt Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Double Rocker Switch||DDLS2-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Rocker Switch||DLS-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Toggle Switch||TLS-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Flood/Freeze Sensor||FLF-ZWAVE5||Water Sensor||Z-Wave||Generic Z-Wave Water Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Double Toggle Switch||DTLS2-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Pet Immune Motion Detector<br />
|PIRZB1-ECO<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Door/Window Sensor<br />
|DWZB1-ECO<br />
|Contact Sensor<br />
|Zigbee<br />
|Generic Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Enerwave |<sup>Enerwave</sup>]]===<br />
|Duplex Outlet|| ||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Enerwave |<sup>Enerwave</sup>]]===<br />
|Motion Sensor|| ||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|Eurotronic<br />
|Spirit TRV Thermostat<br />
|700201<br />
|Thermostat<br />
|Z-Wave<br />
|Eurotronic Spirit TRV Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|In-Wall Switch<br />
|ZW30<br />
|Switch<br />
|Z-Wave<br />
|EVA LOGIK In-Wall Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|Smart Plug||ZW36, ZW37||Outlet||Z-Wave||EVA LOGIK Smart Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|Smart Plug<br />
|ZW39<br />
|Dimmer<br />
|Z-Wave<br />
|EVA LOGIK Smart Plug Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|Outdoor Plug<br />
|ZW96<br />
|Outlet<br />
|Z-Wave<br />
|EVA LOGIK Smart Plug<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Contact Sensor||HSM02||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Flood Detector||ST812||Water Sensor||Z-Wave||Generic Z-Wave Water Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Temperature/Humidity Sensor||ST814||Temperature Sensor||Z-Wave||Generic Z-Wave Temperature/Humidity Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Everspring Illumination Sensor<br />
|ST815<br />
|Light Sensor<br />
|Z-Wave<br />
|Everspring Illumination Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Motion Sensor||HSP02||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Smoke Detector||SF813||Smoke Detector||Z-Wave||Generic Z-Wave Smoke Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Evolve |<sup>Evolve</sup>]]===<br />
|Relay||LFM-20||Relay||Z-Wave||Generic Z-Wave Relay|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Universal Binary Sensor<br />
|FGBS-001<br />
|Contact Sensor<br />
|Z-Wave<br />
|Fibaro Universal Binary Sensor<br />
|<br />
|Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Fibaro Smart Implant<br />
|FGBS-222<br />
|Multisensor<br />
|Z-Wave<br />
|Fibaro Smart Implant<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Button||FGPB-101||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Door/Window Sensor 2||FGDW-002||Contact Sensor||Z-Wave||Fibaro Door/Window Sensor 2|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Flood Sensor||FGFS-101||Water Sensor||Z-Wave||Fibaro Flood Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Flood Sensor ZW5||FGFS-101 ZW5||Water Sensor||Z-Wave||Fibaro Flood Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|KeyFob||FGKF-601 ZW5||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Motion Sensor ZW5||FGMS-001||Motion Sensor||Z-Wave||Fibaro Motion Sensor ZW5|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Fibaro RGBW Controller||FGRGBW-101||RGBW Controller||Z-Wave||Fibaro RGBW Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Single Switch 2||FGS-213||Switch||Z-Wave||Fibaro Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Radiator Thermostat<br />
|FIBEFGT-001<br />
|Thermostat<br />
|Z-Wave<br />
|Fibaro Heat Controller Thermostat Head<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Wall Plug||FGWPB-111, FGWPB-121||Outlet||Z-Wave||Fibaro Wall Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Fibaro Dimmer 2||FGD-212||Dimmer||Z-Wave||Fibaro Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#First Alert |<sup>First Alert</sup>]]===<br />
|Smoke & CO Alarm||ZCOMBO||Smoke/CO Detector||Z-Wave||Generic Z-Wave Smoke/CO Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#First Alert |<sup>First Alert</sup>]]===<br />
|Smoke & CO Alarm<br />
|ZCOMBO Gen 2 & 3<br />
|Smoke/CO Detector<br />
|Z-Wave<br />
|Generic Z-Wave Plus Smoke/CO Detector<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#FortrezZ|<sup>FortrezZ</sup>]]===<br />
|MIMO2+||MIMO2+||Relay||Z-Wave||Fortrezz MIMO2+|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#FortrezZ|<sup>FortrezZ</sup>]]===<br />
|MIMOlite||MIMOlite||Relay||Z-Wave||Fortrezz MIMOlite|| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Outlet<br />
|14267<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Plus Outlet<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Switch<br />
|14293<br />
|Switch||Z-Wave||Generic Z-Wave Plus Scene Switch<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Dimmer<br />
|14296<br />
|Dimmer<br />
|Z-Wave<br />
|GE Enbrighten Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Outdoor Smart Switch<br />
|14298<br />
|Switch||Z-Wave||Generic Z-Wave Plus Switch<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Switch<br />
|43072, 43074, 46201, 46202<br />
|Switch||Z-Wave||Generic Z-Wave Plus Scene Switch<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Dimmer<br />
|46204<br />
|Dimmer||Z-Wave||GE Enbrighten Z-Wave Smart Dimmer<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Outlet<br />
|55249<br />
|Outlet<br />
|Z-Wave<br />
|Jasco Z-Wave Dual Outlet<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Dimmer<br />
|52252<br />
|Dimmer<br />
|Z-Wave<br />
|GE Enbrighten Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Outlet<br />
|55256<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Plus Outlet<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Fan Control<br />
|55258<br />
|Fan Controller<br />
|Z-Wave<br />
|GE Smart Fan Control<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Switch||14291||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|GE 40 Amp Smart Switch<br />
|14285<br />
|Switch<br />
|Z-Wave<br />
|GE 40 Amp Smart Switch<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Dimmer||14294||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Motion Switch||26931||Switch||Z-Wave||Jasco Z-Wave Motion Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Motion Dimmer||26993||Dimmer||Z-Wave||Jasco Z-Wave Motion Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Plug-In Dual Outlet Smart DImmer<br />
|28175<br />
|Dimmer<br />
|Z-Wave<br />
|Jasco Z-Wave Dual Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Plug-In Dual Outlet Smart Switch<br />
|28177<br />
|Switch<br />
|Z-Wave<br />
|Jasco Z-Wave Dual Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|GE Smart Door Sensor||32563ZW6301||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|In-Wall Smart Switch<br />
|42078<br />
|Switch<br />
|Zigbee<br />
|GE Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Switch<br />
|43076<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|In-Wall Smart Dimmer<br />
|43080, 43082<br />
|Dimmer<br />
|Zigbee<br />
|GE Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|In-Wall Smart Toggle Switch<br />
|43084<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Dimmer<br />
|43090<br />
|Dimmer<br />
|Zigbee<br />
|GE Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|Plug-In Smart Switch With Dual Controlled Outlets<br />
|43094, 43095, 43096<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|Plug-In Outdoor Smart Outlet<br />
|43100<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|In-Wall Smart Outlet<br />
|43102<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|In-Wall Smart Paddle Switch<br />
|43109<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|In-Wall Smart Dimmer<br />
|43113<br />
|Dimmer<br />
|Zigbee<br />
|GE Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|Plug-In Switch Module Dual Controlled Plug<br />
|43125<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|Plug-In Dimmer Module Dual Controlled Plug<br />
|43127<br />
|Dimmer<br />
|Zigbee<br />
|GE Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|Tamper Resistant Smart Outlet<br />
|43132<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Plug-In Smart Switch<br />
|45853<br />
|Switch<br />
|Zigbee<br />
|GE Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Switch||45856||Switch||Zigbee||GE Zigbee Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Dimmer||45857||Dimmer||Zigbee||GE Zigbee Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Enbrighten Smart Switch<br />
|46201<br />
|Switch<br />
|Z-Wave<br />
|GE Z-Wave Smart Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Enbrighten Smart Dimmer<br />
|46203<br />
|Dimmer<br />
|Z-Wave<br />
|GE Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart LED Bulb<br />
|52190<br />
|Bulb<br />
|Z-Wave<br />
|Generic Z-Wave Plus Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Flood/Freeze Sensor<br />
|52247<br />
|Water Sensor<br />
|Z-Wave<br />
|Jasco Flood Freeze Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Slim Door/Window Sensor<br />
|52249<br />
|Contact Sensor<br />
|Z-Wave<br />
|Generic Z-Wave Plus Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Portable Smart Motion Sensor<br />
|52251<br />
|Motion Sensor<br />
|Z-Wave<br />
|Jasco Smart Motion Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|2-Button Hub/Panel Remote<br />
|53829<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Plus Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|4-Button Hub/Panel Remote<br />
|53831<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Plus Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GLEDOPTO|<sup>GLEDOPTO</sup>]]===<br />
|Mini RGB+CCT Controller<br />
|GL-MC-001<br />
|Bulb<br />
|Zigbee<br />
|Generic ZigBee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Garage Door Controller||GD00Z-8<br />
|Garage Door Controller||Z-Wave||Generic Z-Wave Garage Door Opener|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Glass Break Detector|| ||Glass Break Detector||Z-Wave||Generic Glass Break Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Z-Wave Thermostat||GC-TBZ48||Thermostat||Z-Wave||GoControl Z-Wave Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Dimmable LED Indoor Flood Light<br />
|LBR30Z-1<br />
|Bulb<br />
|Z-Wave<br />
|Generic Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Smart Wireless Light Switch<br />
|WA00Z-1<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Google Home|<sup>Google</sup>]]===<br />
|Google Home Assistant|| ||Voice Assistant||Cloud|| ||Google Home Integration||<br />
|-<br />
|<br />
===<sup>Google</sup>===<br />
|Chromecast|| ||Media Renderer||LAN|| ||Chromecast Integration (beta)||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Graber |<sup>Graber</sup>]]===<br />
|Z-Wave+ Roller Blinds|| ||Shade Controller||Z-Wave||Generic Z-Wave Shade|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Halo Labs |<sup>Halo Labs</sup>]]===<br />
|Halo+ Smoke Alarm|| ||Smoke/CO Detector||Zigbee||Halo Smoke Alarm|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hampton Bay |<sup>Hampton Bay</sup>]]===<br />
|Fan Controller||MR101Z||Fan Controller||Zigbee|| || ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hank |<sup>Hank</sup>]]===<br />
|Four-Key Scene Controller||HKZW-SCN04||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hank |<sup>Hank</sup>]]===<br />
|One-Key Scene Controller||HKZW-SCN01||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hank |<sup>Hank</sup>]]===<br />
|RGBW LED Bulb||HKZW-RGB01||Bulb||Z-Wave||Hank RGBW LED Bulb|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Dim<br />
|14 444 44<br />
|Dimmer<br />
|Z-Wave<br />
|Heatit Z-Dim<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Temp2<br />
|45 126 66<br />
|Thermostat<br />
|Z-Wave<br />
|Heatit Z-Temp2<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Repeater<br />
|45 126 86<br />
|Repeater<br />
|Z-Wave<br />
|Heatit Z-Repeater<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Heatit</sup>===<br />
|Z-Smoke Battery<br />
|45 126 88<br />
|Smoke Detector<br />
|Z-Wave<br />
|Heatit Z-Smoke<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Smoke 230V<br />
|45 126 89<br />
|Smoke Detector<br />
|Z-Wave<br />
|Heatit Z-Smoke<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-TRM3<br />
|54 305 98<br />
|Thermostat<br />
|Z-Wave<br />
|Heatit Z-TRM3<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Heiman</sup>===<br />
|Zigbee Gas Detector<br />
|HS1CG<br />
|Gas Detector<br />
|Zigbee<br />
|Heiman Zigbee Gas Detector<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Heiman</sup>===<br />
|Z-Wave Smoke Detector<br />
|HS1SA-Z<br />
|Smoke Detector<br />
|Z-Wave<br />
|Generic Z-Wave Smoke Detector<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#HomePro |<sup>HomePro</sup>]]===<br />
|Outlet||ZRP110||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|ZWave Plus Door/Window Sensor||HS-DS100+||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Floodlight Sensor<br />
|HS-FLS100+<br />
|Light Sensor<br />
|Z-Wave<br />
|HomeSeer Floodlight Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Homeseer</sup>===<br />
|HomeSeer Floodlight Sensor G2<br />
|HS-FLS100-G2<br />
|Light Sensor<br />
|Z-Wave<br />
|HomeSeer Floodlight Sensor G2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Indicator Light Sensor||HS-FS100-L+||Light Sensor||Z-Wave||HomeSeer Flex Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Perimeter Water Sensor||HS-FS100-W+||Water Sensor||Z-Wave||HomeSeer Flex Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Multi-Sensor<br />
|HSM200<br />
|Motion Sensor<br />
|Z-Wave<br />
|HomeSeer Multi-Sensor HSM200<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Fan Controller<br />
|FC200+<br />
|Fan Controller<br />
|Z-Wave<br />
|HomeSeer Fan Controller FC200+<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|Water Sensor||HS-LS100+||Water Sensor||Z-Wave||HomeSeer Leak Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|Wall Dimmer||HS-WD200+||Dimmer||Z-Wave||HomeSeer WD-200 Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|Wall Switch||HS-WS200+||Switch||Z-Wave||Generic Z-Wave CentralScene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Honeywell|<sup>Honeywell</sup>]]===<br />
|T6 Pro Z-Wave Thermostat<br />
|TH6320ZW2003<br />
|Thermostat<br />
|Z-Wave<br />
|Honeywell T6 Pro Z-Wave Thermostat<br />
|<br />
|<br />
|-<br />
|'''Haozee'''<br />
|Door Sensor 700 Series<br />
|<br />
|Contact Sensor<br />
|Z-Wave<br />
|Neo Door Sensor 700<br />
|<br />
|<br />
|-<br />
|'''Haozee'''<br />
|Motion Sensor 700 Series<br />
|<br />
|Motion Sensor<br />
|Z-Wave<br />
|Neo Motion Sensor 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>iBlinds</sup>===<br />
|HAB Home Intel Z-Wave iBlinds V3<br />
|IB3.0<br />
|Shade Controller<br />
|Z-Wave<br />
|HAB Home Intel Blinds V3<br />
|<br />
|<br />
|-<br />
|<br />
===[[IFTTT Integration|<sup>IFTTT</sup>]]===<br />
| || || ||Cloud|| ||IFTTT Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|SYMFONISK Sound Remote<br />
|20370482<br />
|Button Controller<br />
|Zigbee<br />
|Ikea Zigbee Sound Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|TRÅDFRI Bulb E26||1000lm Warm White||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|TRÅDFRI Outlet|| ||Outlet||Zigbee||Ikea TRADFRI Control Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|TRÅDFRI Signal Repeater|| ||Repeater||Zigbee||Ikea TRADFRI Signal Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Innr|<sup>Innr</sup>]]===<br />
|Smart Spot Colour GU10<br />
|RS 230 C<br />
|Bulb<br />
|Zigbee<br />
|Generic ZigBee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Innr</sup>===<br />
|Zigbee outlet - UK version<br />
|SP222<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Outlet|| ||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Switch|| ||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Switch Module|| ||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Switch<br />
|NZW30<br />
|Switch<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Scene Switch<br />
|NZW30<br />
|Switch<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Scene Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Dimmer<br />
|NZW31<br />
|Dimmer<br />
|Z-Wave<br />
|Inovelli Z-Wave Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Scene Dimmer<br />
|NZW31<br />
|Dimmer<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Scene Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|2-Channel Plug<br />
|NZW37<br />
|Outlet<br />
|Z-Wave<br />
|Inovelli 2-Channel Plug<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Scene Switch S2<br />
|LZW30-SN<br />
|Switch||Z-Wave||Inovelli Z-Wave Smart Scene Switch S2|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|On/Off Switch S2<br />
|LZW30<br />
|Switch<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Switch S2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Inovelli Fan/Light Switch<br />
|LZW36<br />
|Fan Controller<br />
|Z-Wave<br />
|Inovelli Fan/Light Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Tuneable White Bulb<br />
|LZW41<br />
|Bulb<br />
|Z-Wave<br />
|Inovelli Bulb Multi-White<br />
|<br />
|Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|RGBW Multi-Color Bulb<br />
|LZW42<br />
|Bulb<br />
|Z-Wave<br />
|Inovelli Bulb Multi-Color<br />
|<br />
|Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Inovelli 4-in-1 Sensor<br />
|LZW60<br />
|Motion Sensor<br />
|Z-Wave<br />
|Inovelli 4-in-1 Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]] <sup>V1 (AlertMe.com)</sup>===<br />
|V1 Button||BTN900||Button Controller||Zigbee||Iris V1 Button|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Care Pendant||PDT900||Button Controller||Zigbee||Iris V1 Care Pendant|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Door/Window Sensor||DWS800||Contact Sensor||Zigbee||Iris V1 Contact Sensor|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Keyfob||KEY903||Presence Sensor||Zigbee||Iris V1 Key Fob|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Motion Sensor||MOT800||Motion Sensor||Zigbee||Iris V1 Motion Sensor|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Smart Plug||SPG800||Outlet||Zigbee||Iris V1 Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Button||3460-L||Button Controller||Zigbee||Iris Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Door/Window Sensor||3320-L||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|Garage Door Opener||GD00Z-1||Garage Door Controller||Z-Wave||Generic Z-Wave Garage Door Opener|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V3 Contact Sensor<br />
|1116-S<br />
|Contact Sensor<br />
|Zigbee<br />
|Generic Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Keypad||3405-L||Keypad||Zigbee||Iris V2 Keypad|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V3 Keypad||iL02_1||Keypad||Zigbee||Iris V3 Keypad|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Motion Sensor||3326-L||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V3 Motion Sensor||iL07_1||Motion Sensor||Zigbee||Generic Zigbee Motion/Humidity Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Outlet||3210-L||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|Smart Plug Z-Wave Repeater||3210-L||Repeater||Z-Wave||Generic Z-Wave Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Smart Fob||3450-L||Button Controller||Zigbee||Iris 4 Button Fob|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|Smart Water Sensor||3315-L||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#KEEN Home |<sup>KEEN Home</sup>]]===<br />
|Smart Vent|| ||Vent||Zigbee||Keen Home Smart Vent|| ||<br />
|-<br />
|<br />
===<sup>keyWe</sup>===<br />
|Lock|| ||Lock||Z-Wave||keyWe Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|10-Button Deadbolt|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|10-Button Touch Deadbolt|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|5-Button Deadbolt|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|5-Button Lever|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|910/912 Lock|| ||Lock||Z-Wave||Generic Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|Smartcode Lock|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leak Intelligence |<sup>Leak Intelligence</sup>]]===<br />
|Leak Gopher Valve|| ||Valve||Z-Wave||Generic Z-Wave Valve|| ||<br />
|-<br />
|<br />
===<sup>Leaksmart</sup>===<br />
|Water Sensor<br />
|8850600<br />
|Water Sensor<br />
|Zigbee<br />
|Leaksmart Zigbee Moisture Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Leaksmart</sup>===<br />
|Water Valve<br />
|8880000<br />
|Water Valve<br />
|Zigbee<br />
|Sinope water valve<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Fan Controller|| ||Fan Controller||Z-Wave||Leviton Fan Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Plug-in Dimmer<br />
|DG3HL<br />
|Dimmer<br />
|Zigbee<br />
|Leviton Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Plug-in Outlet<br />
|DG15A<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|In-Wall Switch<br />
|DG15S<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|In-Wall Dimmer<br />
|DG6HD<br />
|Dimmer<br />
|Zigbee<br />
|Leviton Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Plug-in Appliance Module||DZPA1||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Dimmer||VRMX1||Dimmer||Z-Wave||Generic Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Smart Dimmer||DZ6HD-1BZ||Dimmer||Z-Wave||Leviton DZ6HD Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Smart Dimmer||DZMX1||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch<br />
|VRCS1<br />
|Switch<br />
|Z-Wave<br />
|Leviton VRCS1 Z-Wave Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Scene controller||VRCS4||Button Controller||Z-Wave||Leviton VRCS4 Z-Wave Controller<br />
| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch<br />
|DL15S<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch||DZ15S||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Dimmer||VRI06-1LZ, VRI10-1LZ||Dimmer||Z-Wave||Generic Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch||DZS15-1LZ||Switch||Z-Wave||Generic Z-Wave Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch||VRS15-1LZ||Switch||Z-Wave||Generic Z-Wave Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Tamper-Resistant Outlet<br />
|ZW15R<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Life360 Connector|<sup>Life360</sup>]]===<br />
|Life360 App|| ||Presence Sensor||Cloud|| ||Life360 Connector||Compatible Smart Phone<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Linear |<sup>Linear</sup>]]===<br />
|Contact Sensor||WADWAZ-1||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Linear |<sup>Linear</sup>]]===<br />
|Motion Sensor||WAPIRZ-1||Motion Sensor||Z-Wave||Generic Z-Wave Motion/Temperature Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Linear |<sup>Linear</sup>]]===<br />
|Siren||WA105DBZ-1||Siren||Z-Wave||Linear/Vision Siren|| ||<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Tunable White Bulb<br />
|ZL1000100-CCT-EU<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Dimmable White Bulb<br />
|ZL1000100-CCT/DIM-US<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Door/Window Sensor<br />
|ZS1100500<br />
|Contact Sensor<br />
|Zigbee<br />
|Generic Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Motion Sensor<br />
|ZS1100400<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Smart Plug<br />
|WS1900000-IN-US<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Caséta Dimmers and Switches|| ||Dimmer||LAN||Lutron Dimmer, Lutron Switch||Lutron Integration||Caséta SmartBridge Pro<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Caséta SmartBridge Pro|| ||Bridge||LAN||Lutron Keypad||Lutron Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Pico Remotes|| ||Button Controller||LAN||Lutron Pico, Lutron Fast Pico||Lutron Integration||Caséta SmartBridge Pro or Radio RA2<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Dimmers and Switches|| ||Dimmer||LAN||Lutron Dimmer, Lutron Switch||Lutron Integration||RadioRA2 Select or RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Keypads|| ||Keypad||LAN||Lutron Keypad||Lutron Integration||RadioRA2 Select or RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Main Repeater|| ||Repeater||LAN|| ||Lutron Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Motion Sensors|| ||Motion Sensor||LAN||Lutron Motion Sensor||Lutron Integration||RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Select|| ||Bridge||LAN||Lutron Keypad||Lutron Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 VCRX Garage Controller|| ||Garage Controller||LAN||Lutron Keypad||Lutron Integration||RadioRA2 Main Repeater or RadioRA2 VCRX Visor Controller Receiver<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 VCRX Visor Controller Receiver<br />
|<br />
|Bridge<br />
|LAN<br />
|Lutron VCRX<br />
|Lutron Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Serena Shades|| ||Shade Control||LAN||Lutron Shade||Lutron Integration||RadioRA2 Select, RA2 Main Repeater or Caséta SmartBridge Pro<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Sivoia QS Triathlon Shades|| ||Shade Control||LAN||Lutron Shade||Lutron Integration||RadioRA2 Select, RA2 Main Repeater or Caséta SmartBridge Pro<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Thermostat|| ||Thermostat||LAN||Lutron Thermostat||Lutron Integration||RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Lutron Fan Control|| ||Fan Controller||LAN||Lutron Fan Control||Lutron Integration||RadioRA2 Select, RA2 Main Repeater or Caséta SmartBridge Pro<br />
|-<br />
|<br />
===<sup>Lutron</sup>===<br />
|HVAC Controller<br />
|LR-HVAC-1<br />
|HVAC Controller<br />
|LAN<br />
|Lutron HVAC Controller<br />
|Lutron Integration<br />
|RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron|<sup>Lutron</sup>]]===<br />
|Aurora Controller||Z3-1BRL||Button Controller||Zigbee||Lutron Aurora Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lux |<sup>Lux</sup>]]===<br />
|Zigbee Thermostat||KONOz||Thermostat||Zigbee||LUX Zigbee Thermostat|| ||<br />
|-<br />
|<br />
===<sup>Marantz</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Denon AVR|| ||<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|In-Wall Smart Switch<br />
|MS10Z<br />
|Switch<br />
|Z-Wave<br />
|EVA LOGIK In-Wall Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|Smart Switch<br />
|MS10ZS<br />
|Switch<br />
|Z-Wave<br />
|Minoston MS10ZS Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|Smart Dimmer Switch<br />
|MS11ZS<br />
|Dimmer<br />
|Z-Wave<br />
|Minoston MS11ZS Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|2-Channel Plug<br />
|MP20Z<br />
|Outlet<br />
|Z-Wave<br />
|Inovelli 2-Channel Plug<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|Mini Plug-in Outlet<br />
|MP21Z<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#MCO Home |<sup>MCOHome</sup>]]===<br />
|Dimmer Switch|| ||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|Mode Lighting<br />
|eDIN+ Network Processor Module<br />
|DIN-NPU-00-01-PLUS<br />
|Network Controller<br />
|LAN<br />
|eDIN Network Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Contact Sensor|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Outlet|| ||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Plugin Dimmer|| ||Dimmer||Z-Wave||Generic Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plugin On/Off||11995||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus PIR Motion Detector With Temperature Sensor||15271||Motion Sensor||Z-Wave||Generic Z-Wave Motion/Temperature Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus PIR Multi Sensor||15902||Motion Sensor||Z-Wave||Zooz 4-in-1 Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus Recessed Door/Window Sensor||15268||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus Smart Plug and Repeater with 2 USB ports||27481||Outlet||Z-Wave||Zooz Power Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus Door/Window Sensor||15270||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NanoLeaf|<sup>NanoLeaf</sup>]]===<br />
|Aurora Light Panels|| ||Bulb||LAN||Nanoleaf Aurora|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NanoLeaf|<sup>NanoLeaf</sup>]]===<br />
|Canvas Light Panels|| ||Bulb||LAN||Nanoleaf Aurora|| ||<br />
|-<br />
|<br />
===<sup>NEEO</sup>===<br />
|NEEO Remote|| ||AVR Remote||LAN||NEEO Remote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Door/Window Sensor||NAS-DS02ZU||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Door/Window Sensor||NAS-DS01ZE||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Motion Sensor||NAS-PD01ZU-T||Motion Sensor||Z-Wave||Neo Coolcam Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Power Plug||NAS-WR02Z*||Outlet||Z-Wave||Neo Coolcam Power Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Remote Control 1||NAS-RC03ZU||Button Controller||Z-Wave||Neo Coolcam Remote Control|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Remote Control 4||NAS-RC03ZU||Button Controller||Z-Wave||Neo Coolcam Remote Control|| ||<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Light Switch 1||NAS-SC02ZU-1||Switch||Z-Wave||Neo Coolcam Light Switch|| ||<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Light Switch 2||NAS-SC02ZU-2||Switch||Z-Wave||Neo Coolcam Light Switch|| ||<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Door Sensor 700<br />
|NAS-DS07ZU<br />
|Contact Sensor<br />
|Z-Wave<br />
|Neo Door Sensor 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Motion Sensor 700<br />
|NAS-PD07ZU<br />
|Motion Sensor<br />
|Z-Wave<br />
|Neo Motion Sensor 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Water Sensor 700<br />
|NAS-WS02ZU<br />
|Water Sensor<br />
|Z-Wave<br />
|Neo Water Sensor 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Z-Wave Repeater 700<br />
|NAS-RP02Z1U<br />
|Repeater<br />
|Z-Wave<br />
|Neo Z-Wave Repeater 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nexia</sup>===<br />
|Scene Controller<br />
|NX1000<br />
|Button Controller<br />
|Z-Wave<br />
|Nexia NX1000<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NodOn |<sup>NodOn</sup>]]===<br />
|Octan Remote||CRC-3US-1||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NodOn |<sup>NodOn</sup>]]===<br />
|Soft Remote||CRC-3US-6||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Dimmer<br />
|HGZB-021<br />
|Dimmer<br />
|Zigbee<br />
|Nue Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Switch<br />
|HGZB-01A<br />
|Switch<br />
|Zigbee<br />
|Nue Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee 3.0 Light Controller<br />
|HGZB-07A<br />
|Bulb<br />
|Zigbee<br />
|Generic ZigBee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|1 Gang Light Switch||HGZB-41||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|2 Gang Light Switch||HGZB-42||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|3 Gang Light Switch||HGZB-43||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|4 Gang Light Switch||HGZB-44||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Dimmer||HGZB-4D||Dimmer||Zigbee||Nue Zigbee Dimmer|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Fan Contoller<br />
|HGZB-FS<br />
|Fan Controller<br />
|Zigbee<br />
|Nue Zigbee Fan Controller<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Scene Contoller<br />
|HGZB-1S, HGZB-2S, HGZB-4S<br />
|Button Controller<br />
|Zigbee<br />
|Nue Zigbee Fan Controller<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|RGBW Strip Controller<br />
|ZB-18A<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Door/Window Sensor||NCZ-3011-HA||Contact Sensor||Zigbee||NYCE Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Garage Door (Tilt) Sensor||NCZ-3014-HA||Contact Sensor||Zigbee||NYCE Iris Tilt Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Motion Sensor||NCZ-3041-HA||Motion Sensor||Zigbee||NYCE Motion Sensor Series|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Celing Motion Censor||NCZ-3043-HA||Motion Sensor||Zigbee||NYCE Motion Sensor Series|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Curtain Motion Sensor||NCZ-3045-HA||Motion Sensor||Zigbee||NYCE Motion Sensor Series|| ||<br />
|-<br />
|<br />
===<sup>Onkyo</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Onkyo AVR|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Orbit |<sup>Orbit</sup>]]===<br />
|Smart Hose Faucet Timer||27087||Irrigation Controller||Zigbee||Orbit Hose Water Timer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Orbit |<sup>Orbit</sup>]]===<br />
|12-Station Sprinkler Controller||27396||Irrigation Controller||Zigbee||Orbit 12-Station Sprinkler Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Orvibo |<sup>Orvibo</sup>]]===<br />
|Motion Sensor||SN11||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify Flex RGBW|| ||Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Smart+ Classic E27 Multicolor|| ||Bulb||Zigbee||Advanced Zigbee RGBW Bulb<br />
| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Classic B40 Tunable White 60W|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Flood BR30 Tunable White|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Recessed Kit RT 5/6 Tunable|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Tunable White 60W|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Smart Outdoor Plug|| ||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===<sup>PEQ</sup>===<br />
|Contact Sensor||3300||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===<sup>PEQ</sup>===<br />
|Motion Sensor||3305||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===<sup>PEQ</sup>===<br />
|Moisture Sensor||3315||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Dimmer Switch||73698<br />
|Button Controller||Zigbee||Philips Dimmer Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Dimmer Switch V2<br />
|562777<br />
|Button Controller<br />
|Zigbee<br />
|Philips Dimmer Button Controller V2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Bloom Lights|| ||Bulb||Zigbee||Generic Zigbee RGB Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Bridge|| ||Bridge||LAN|| ||Hue Bridge Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Living Colors Lights|| ||Bulb||Zigbee||Generic Zigbee RGB Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Lux|| ||Bulb||Zigbee||Generic Zigbee RGBW Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Motion Sensor||473389||Motion Sensor||Zigbee||Hue Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Outdoor Motion Sensor||541730||Motion Sensor||Zigbee||Hue Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Smart Plug<br />
|046677552343<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Smart Button<br />
|046677553715<br />
|Button Controller<br />
|Zigbee<br />
|Hue Smart Button<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Strip Lights|| ||Bulb||Zigbee||Generic Zigbee RGB Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|White and Color Ambiance LightStrip|| ||Bulb||Zigbee||Advanced Zigbee RGBW Bulb<br />
|Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|White Ambiance|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===<sup>Philips Hue</sup>===<br />
|White and Color Ambiance Bulb<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|Hue Bridge Integration<br />
|Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===<sup>Pioneer</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Pioneer AVR|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Powerly|<sup>Powely</sup>]]===<br />
|Thermostat<br />
|<br />
|Thermostat<br />
|Z-Wave<br />
|Generic Z-Wave Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Pushover|<sup>Pushover</sup>]]===<br />
|Pushover|| ||Notification||Cloud||Pushover driver|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Relay||<br />
|Relay||Z-Wave||Generic Z-Wave Relay|| ||<br />
|-<br />
|Qubino<br />
|EU Smart Meter<br />
|XMNHTD1<br />
|Energy Meter<br />
|Z-Wave<br />
|Qubino Smart Meter<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush 2 Relay||ZMNHBD3||Relay||Z-Wave||Qubino 2 Relay Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush 1D Relay||ZMNHND3||Relay||Z-Wave||Qubino 1D Relay Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush Shutter||ZMNHCD3||Relay||Z-Wave||Qubino Shutter Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush Shutter DC||ZMNHOD3||Relay||Z-Wave||Qubino Shutter Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush ON/OFF Thermostat||ZMNHID3||Thermostat||Z-Wave||Qubino Thermostat Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush 1 Relay||ZMNHAD3||Relay||Z-Wave||Qubino 1 Relay Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush Dimmer||ZMNHDD3||Dimmer||Z-Wave||Qubino Dimmer Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Mini Dimmer<br />
|ZMNHHD3<br />
|Dimmer<br />
|Z-Wave<br />
|Qubino Mini Dimmer<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Luxy Smart Light<br />
|ZMNHQD1<br />
|Bulb<br />
|Z-Wave<br />
|Qubino Luxy Smart Light<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Luxy Smart Switch<br />
|ZMNKAD1<br />
|Switch<br />
|Z-Wave<br />
|Qubino Luxy Smart Switch<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Flush On/Off Thermostat 2<br />
|ZMNKID1<br />
|Thermostat<br />
|Z-Wave<br />
|Qubino Flush Thermostat 2<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Din Dimmer<br />
|ZMNHSD1<br />
|Dimmer<br />
|Z-Wave<br />
|Qubino DinDimmer<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Flush Dimmer 0-10V<br />
|ZMNHVD1<br />
|Dimmer<br />
|Z-Wave<br />
|Qubino Flush Dimmer 0-10V<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version 3-Phase Smart Meter<br />
|ZMNHXD1<br />
|Energy Meter<br />
|Z-Wave<br />
|Qubino 3-Phase Smart Meter<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Quotra|<sup>Quotra</sup>]]===<br />
|Quotra Wireless Smart Dimmer|| ||Dimmer||Zigbee||Generic Zigbee Dimmer|| ||<br />
|-<br />
|<br />
===<sup>Rachio</sup>===<br />
| || ||Irrigation Controller||Cloud|| ||Rachio Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Radio Thermostat Company of America |<sup>Radio</sup>]]===<br />
|CT100 Thermostat||CT100||Thermostat||Z-Wave||Generic Z-Wave Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Radio Thermostat Company of America |<sup>Radio</sup>]]===<br />
|CT101 Thermostat||CT101||Thermostat||Z-Wave||Radio Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Radio Thermostat Company of America |<sup>Radio</sup>]]===<br />
|Thermostat Z-Wave USNAP Module|| ||Thermostat||Z-Wave||Generic Z-Wave Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Remotec|<sup>Remotec</sup>]]===<br />
|ZFM-80 relay||ZFM-80||Relay||Z-Wave||Remotec ZFM-80|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Remotec|<sup>Remotec</sup>]]===<br />
|ZRC-90 Button Controller||ZRC-90||Button Controller||Z-Wave||Remotec ZRC-90|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Remotec|<sup>Remotec</sup>]]===<br />
|ZXT600 AC Controller<br />
|ZXT600<br />
|Thermostat<br />
|Z-Wave<br />
|Remotec Z-Wave-to-AC IR Extender ZXT600<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|4 Channel Dimming Controller<br />
|ZB-1003<br />
|Dimmer<br />
|Zigbee<br />
|RGBgenie Micro Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|RGBW Color Controller<br />
|ZB-1025<br />
|Dimmer<br />
|Zigbee<br />
|RGBgenie Micro Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>RGBgenie</sup>===<br />
|3 Scene Color Touch Panel and Dimmer<br />
|ZB-3009, ZB-3010<br />
|Dimmer<br />
|Zigbee<br />
|RGBGenie Controller ZB-3009/10<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>RGBgenie</sup>===<br />
|4 Zone 2 Scene Remote<br />
|ZB-5004<br />
|Button Controller<br />
|Zigbee<br />
|RGBGenie Controller ZB-5004<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Color Controller Panel||ZB-3026||Button Controller||Zigbee||RGBgenie Controller ZB-3026|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Channel Trailing Edge Dimmer<br />
|ZB-4002<br />
|Dimmer<br />
|Zigbee<br />
|RGBgenie Micro Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Channel Micro Controller and Lamp Module<br />
|ZB-4003<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|5 Zone Remote and Dimmer<br />
|ZB-5001<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|3 Zone Color Touch Panel||ZB-5027||Button Controller||Zigbee||RGBgenie Controller ZB-3027|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Color Remote||ZB-5028||Button Controller||Zigbee||RGBgenie Controller ZB-5028|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Color Wall Mounted Remote Controller||ZB-5121||Button Controller||Zigbee||RGBgenie Controller ZB-512x|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Color Micro Remote with single scene recall||ZB-5122||Button Controller||Zigbee||RGBgenie Controller ZB-5122|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single color controller<br />
|ZW-1001<br />
|Dimmer<br />
|Z-Wave<br />
|Generic Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|RGBW Color Controller<br />
|ZW-1002<br />
|Dimmer<br />
|Z-Wave<br />
|Generic Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Micro Controller and Lamp Module<br />
|ZW-4001<br />
|Dimmer<br />
|Z-Wave<br />
|RGBgenie Z-Wave Micro Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Micro Switch<br />
|ZW-4004<br />
|Switch<br />
|Z-Wave<br />
|RGBgenie Micro Switch ZW-4004<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Remote<br />
|ZW-5002<br />
|Button Controller<br />
|Z-Wave<br />
|<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Contact Sensor V1<br />
|4SD1S70EN0<br />
|Contact Sensor<br />
|Z-Wave<br />
|Ring Alarm Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Contact Sensor V2<br />
|4SD2SZ0EN0<br />
|Contact Sensor<br />
|Z-Wave<br />
|Ring Alarm Contact Sensor G2<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|'''Ring'''<br />
|Ring Flood & Freeze Sensor<br />
|4SF1S8-0EN0<br />
|Water Sensor<br />
|Z-Wave<br />
|Ring Flood Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Hardwired Retrofit Kit<br />
|4AW1SZ0EN0<br />
|Multisensor<br />
|Z-Wave<br />
|Ring Alarm Retrofit<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Keypad V1<br />
|4AK1S70EN0<br />
|Keypad<br />
|Keypad<br />
|Ring Alarm Keypad G1<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Keypad V2<br />
|4AK1SZ0EN0<br />
|Keypad<br />
|Keypad<br />
|Ring Alarm Keypad G2<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Motion Sensor V1<br />
|4SP1S70EN0<br />
|Motion Sensor<br />
|Z-Wave<br />
|Ring Alarm Motion Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Motion Sensor V2<br />
|4SP2SZ0EN0<br />
|Motion Sensor<br />
|Z-Wave<br />
|Ring Alarm Motion Sensor G2<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|'''Ring'''<br />
|Ring Outdoor Siren<br />
|<br />
|Siren<br />
|Z-Wave<br />
|Ring Outdoor Siren<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Range Extender V1<br />
|4AR1S70EN0<br />
|Repeater<br />
|Z-Wave<br />
|Ring Alarm Range Extender<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Smoke/CO Listener<br />
|4SS1S80EN0<br />
|Smoke/CO Detector<br />
|Z-Wave<br />
|Ring Alarm Smoke/CO Listener<br />
|<br />
|<br />
|- <br />
|<br />
===[[Join and Reset Instructions#Salus|<sup>Salus</sup>]]===<br />
|Smart Plug||SP600||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Outlet (2017 Model)<br />
|F-OUT-US-2<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Bulb<br />
|GP-LBU019BBAWU<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Button V5||IM6001-BTP<br />
|Button Controller||Zigbee||Samsung Zigbee Button|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Motion Sensor V5||IM6001-MTP<br />
|Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Water Leak Sensor V5||IM6001-WLP<br />
|Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Multi Sensor V5||IM6001-MPP<br />
|Contact Sensor||Zigbee||SmartThings Multipurpose Sensor V5|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Outlet V5||IM6001-OTP<br />
|Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|Doorbell Sensor<br />
|<br />
|Doorbell Sensor<br />
|Zigbee<br />
|SAGE Doorbell Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|Light Switch Controller<br />
|<br />
|Button Controller<br />
|Zigbee<br />
|SAGE Light Switch Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|A19 Bulb<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|BR30 Bulb<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Samotech</sup>===<br />
|Zigbee Control Module<br />
|MS104Z<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Classic Bulb||E11-G13||Bulb||Zigbee||Sengled Element Classic|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Classic Bulb||E11-G14||Bulb||Zigbee||Sengled Element Classic|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Multicolor Bulb||E11-N1EA||Bulb||Zigbee||Sengled Element Color Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Multicolor Light Strip||E1G-G8E||Bulb||Zigbee||Sengled Element Color Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Plus Bulb||Z01-A19NAE26||Bulb||Zigbee||Sengled Element Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Sengled Element Classic with motion||E13-N11||Bulb||Zigbee||Sengled Element Classic with motion|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Smart Window and Door Sensor||E1D-G73||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Smart Plug||E1C-NB6||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Button Controller<br />
|E1E-G7F<br />
|Button Controller<br />
|Zigbee<br />
|Sengled Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sensative|<sup>Sensative</sup>]]===<br />
|Strips Guard|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sensative|<sup>Sensative</sup>]]===<br />
|Strips Drips|| ||Water Sensor||Z-Wave||Strips Multi-Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sensative|<sup>Sensative</sup>]]===<br />
|Strips Comfort|| ||Temperature Sensor||Z-Wave||Strips Multi-Sensor|| ||<br />
|-<br />
|<br />
===<sup>sharptools.io</sup>===<br />
| || ||Dashboard||Cloud|| ||SharpTools||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly 1<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly 1PM<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly 2.5<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly Bulb<br />
|<br />
|Bulb<br />
|LAN<br />
|Shelly WiFi RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly DUO<br />
|<br />
|Bulb<br />
|LAN<br />
|Shelly WiFi CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly Plug<br />
|<br />
|Outlet<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly Plug S<br />
|<br />
|Outlet<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|WiFi Dimmer<br />
|<br />
|Dimmer<br />
|LAN<br />
|Shelly WiFi Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|WiFi Switch<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Dimmer||DM2500ZB||Dimmer||Zigbee||Sinope Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Electrical Load Controller||RM3250ZB||Switch||Zigbee||Sinope load controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Plug<br />
|SP2600ZB<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|In-Wall Outlet<br />
|SP2610ZB<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Switch<br />
|SW2500ZB<br />
|Switch<br />
|Zigbee<br />
|Sinope Switchq<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart thermostat for electric heating||TH1123ZB||Thermostat||Zigbee||Sinope TH1124ZB (4KW) Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart thermostat for electric heating||TH1124ZB||Thermostat||Zigbee||Sinope TH1124ZB (4KW) Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Floor Heating Thermostat||TH1300ZB||Thermostat||Zigbee||Sinope TH1300ZB Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Low Voltage Thermostat||TH1400ZB||Thermostat||Zigbee||Sinope TH1400ZB Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Double-Pole Thermostat<br />
|TH1500ZB<br />
|Thermostat<br />
|Zigbee<br />
|Sinope TH1400ZB Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Valve||VA4200WZ||Valve||Zigbee||Sinope water valve|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Valve<br />
|VA4220ZB<br />
|Valve<br />
|Zigbee<br />
|Sinope water valve<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Leak Detector||WL4200||Water Sensor||Zigbee||Sinope Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Leak Detector with Sensor||WL4200S||Water Sensor||Zigbee||Sinope Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Contact Sensor||3300-S||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|SmartSense Multi Sensor||STSS-MULT-001||Contact Sensor||Zigbee||SmartSense Multi V1|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Multi Sensor (2015 model)<br />
|F-SS-MULT-001<br />
|Contact Sensor||Zigbee||SmartSense Multi Sensor V4|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Multi Sensor (2016 model)<br />
|F-MLT-US-2<br />
|Contact Sensor<br />
|Zigbee<br />
|SmartSense Multi Sensor V4<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Multi Sensor V4||STS-MLT-250||Contact Sensor||Zigbee||SmartSense Multi Sensor V4|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Humidity Sensor||3310-S||Humidity Sensor||Zigbee||SmartThings Humidity Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|SmartSense Moisture Sensor|| ||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Water Leak Sensor v4 (2015)|| ||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|SmartSense Motion Sensor|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Motion Sensor V2|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Motion Sensor V3|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Motion Sensor V4|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Presence Sensor V2|| ||Presence Sensor||Zigbee||SmartThings Presence Sensor V2|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Presence Sensor V4|| ||Presence Sensor||Zigbee||SmartThings Presence Sensor V4|| ||<br />
|-<br />
|<br />
===<sup>Somfy</sup>===<br />
|2 Button Controller|| ||Button Controller||Z-Wave||Somfy 2 Button Controller|| ||<br />
|-<br />
|<br />
===<sup>Sonos</sup>===<br />
|Speakers|| ||Speaker||LAN|| ||Sonos Integration||<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Button Controller<br />
|SNZB-01<br />
|Button Controller<br />
|Zigbee<br />
|Sonoff Zigbee Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Temperature/Humidity Sensor<br />
|SNZB-02<br />
|Temperature Sensor<br />
|Zigbee<br />
|Sonoff Zigbee Temperature/Humidity Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Motion Sensor<br />
|SNZB-03<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Contact Sensor<br />
|SNZB-04<br />
|Contact Sensor<br />
|Zigbee<br />
|Sonoff Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|S31 Lite Zigbee Smart Plug US<br />
|S31 Lite Zigbee<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|ZBMINI Relay Module<br />
|ZBMINI<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Power reporting outlet<br />
|HK-PLUG-A EU<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Outlet Strip<br />
|HK-LN-SOCKET-A EU<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Mult-Endpoint Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|4 in 1 Universal LED Controller<br />
|ZG1029-5C<br />
|Dimmer<br />
|ZigBee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Zigbee Smart Plug<br />
|ZG9021A<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color 8 button controller<br />
|ZG2833K8_EU05<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Dimmer Module||ZG9101SAC-HP-Dimmer||Dimmer||Zigbee||RGBGenie Z-Wave Micro Controller<br />
| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Relay Module<br />
|ZG9101SAC-HP-Switch<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|AC Phase-Cut Dimmer<br />
|ZV9101SAC-HP<br />
|Dimmer<br />
|Z-Wave<br />
|RGBGenie Z-Wave Micro Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Relay Module<br />
|ZV9101SAC-HP-Switch<br />
|Switch<br />
|Z-Wave<br />
|RGBGenie Z-Wave Micro Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|4 Channels CV 100W Dimmable Driver<br />
|SRP-ZG9105-24-100CVF<br />
|Dimmer<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|In-Wall Smart Switch<br />
|ZV9100<br />
|Switch<br />
|Z-Wave<br />
|RGBgenie Micro Switch ZW-4004<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Door/Window Sensor<br />
|ZV9010A<br />
|Contact Sensor<br />
|Z-Wave<br />
|Generic Z-Wave Door Window Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color remote<br />
|ZG9001K5-5C<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Controller ZB-5122<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color 4-Group remote<br />
|ZG9001K8-DIM<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color remote secondary controller light switch<br />
|ZV9001K8-DIM-G4<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Plus Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Dimmer controller<br />
|ZG9001K12-DIM-Z3<br />
|Button Controller<br />
|Zigbee<br />
|Sunricher Zigbee Wireless Dimmer Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sunricher</sup>===<br />
|EU Zigbee RGBW panel (ZGRC-TEUR-001)<br />
|ZGRC-TEUR-001<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Controller ZB-3027<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color remote secondary controller<br />
|ZV9001K12-DIM-Z4<br />
|Button Controller<br />
|Z-Wave<br />
|RGBGenie Z-Wave Remote<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Dim Remote Control<br />
|ZV9001K12<br />
|Button Controller<br />
|Z-Wave<br />
|RGBGenie Z-Wave Remote ZW-5009<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Smart Plug<br />
|ZV9020A<br />
|Outlet<br />
|Z-Wave<br />
|Sunricher SR-ZV9020A Z-Wave Smart Plug<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Outlet||72922<br />
|Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Motion Sensor||72923<br />
|Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Dimmer||73743<br />
|Button Controller||Zigbee||Sylvania Dimmer Switch Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ 4 Button Switch||74099<br />
|Button Controller||Zigbee||Lightify Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Contact Sensor||74388<br />
|Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ A19 RGBW|| ||Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Outdoor RGBW Flex||73685<br />
|Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Flex RGBW||74521<br />
|Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Flex SL RGBW<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ BR30 RGBW||74988<br />
|Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ RT5/6 RGBW|| ||Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ A19 Dimmable|| ||Bulb||Zigbee||Generic Zigbee Bulb|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Telguard|<sup>Telguard</sup>]]===<br />
|Garage Door Control Switch||GDC1||Switch||Z-Wave||Generic Z-Wave Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Telldus|<sup>Telldus</sup>]]===<br />
|Outlet Switch||TZWP-100<br />
|Outlet||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|Telstra<br />
|Smart Power Plug<br />
|SZ-ESW01-AU<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Third Reality|<sup>Third Reality</sup>]]===<br />
|Reality Switch|| ||Switch||Zigbee||Generic Zigbee Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#TKB|<sup>TKB</sup>]]===<br />
|TKB Dimmer Socket||TZ67E||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===<sup>Trane</sup>===<br />
|Thermostat<br />
|XR524<br />
|Thermostat<br />
|Z-Wave<br />
|Generic ZWave Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|Zigbee Touch Wall Switch (1,2,3 and 4 gang)<br />
|Z801-01US, Z802-01US, SK-Z803-01US<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Multi-Endpoint Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|Zigbee Motion Sensor<br />
|ZXZPIR-02<br />
|Motion Sensor<br />
|Zigbee<br />
|Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|ODM/OEM outlets<br />
|<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|Zigbee Water Valve<br />
|<br />
|Valve<br />
|Zigbee<br />
|Sinope water valve<br />
|<br />
|<br />
|-<br />
|UltraPro<br />
|Smart Dimmer<br />
|39351<br />
|Dimmer<br />
|Z-Wave<br />
|GE Enbrighten Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|UltraPro<br />
|Smart Switch<br />
|39348, 39354<br />
|Switch<br />
|Z-Wave<br />
|Generic Z-Wave Plus Scene Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Utilitech |<sup>Utilitech</sup>]]===<br />
|Siren|| ||Siren||Z-Wave||Linear/Vision Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Vision|<sup>Vision</sup>]]===<br />
|Siren||zm1601US-3, zm1601US-5||Siren||Z-Wave||Linear/Vision Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Vision|<sup>Vision</sup>]]===<br />
|Vision Shock Sensor||ZS5101||Acceleration Sensor||Z-Wave||Generic Z-Wave Acceleration Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Visonic|<sup>Visonic</sup>]]===<br />
|Window Door Sensor||MCT-340 E, MCT-340 SMA||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#WaterCop|<sup>WaterCop</sup>]]===<br />
|Shutoff Valve||192390.02||Valve||Z-Wave||Generic Z-Wave Valve|| ||<br />
|-<br />
|'''Wally'''<br />
|Wally Sensor<br />
|<br />
|Multisensor<br />
|Zigbee<br />
|Wally Multisensor<br />
|<br />
|<br />
|-<br />
|'''Wally'''<br />
|Wally Shutoff Valve<br />
|<br />
|Valve<br />
|Zigbee<br />
|Wally shutoff valve<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Weather Underground</sup>===<br />
|Weather Underground|| ||Notification||Cloud||WeatherUnderground|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Wireless|<sup>Wireless</sup>]]===<br />
|Smoke Detector||ZWN-SD||Smoke Detector||Z-Wave||Generic Z-Wave Smoke Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Xfinity|<sup>Xfinity</sup>]]===<br />
|Xfinity 3400-X Keypad||3400||Keypad||Zigbee||Centralitle Keypad|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Push Button Lever Lock||YRD210||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Assure Keypad Deadbolt||YRD216||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Assure Connected||YRD226||Lock||Z-Wave||Generic Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Lever Lock||YRL236, YRL256||Lock||Zigbee|| Yale Lock |Generic Zigbee Lock<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Conexis L1||Conexis L1||Lock||Z-Wave||Yale Conexis L1 Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Yale Assure Lock SL<br />
|YRD256<br />
|Lock<br />
|Z-Wave<br />
|Generic Z-Wave Lock<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Mono Bulb|| ||Bulb||LAN||Yeelight Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Mono 5<br />
|YLDP11YL/YLDP12YL<br />
|Bulb<br />
|LAN<br />
|Yeelight Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Smart LED Bulb (CT)|| ||Bulb||LAN||Yeelight CT Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Smart LED Bulb (Color and CT)|| ||Bulb||LAN||Yeelight RGBW Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Smart LED Bulb (Color)|| ||Bulb||LAN||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Bedside Lamp|| ||Bulb||LAN||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===<sup>Yeelight</sup>===<br />
|ColorA<br />
|<br />
|Bulb<br />
|LAN<br />
|Yeelight RGB Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Color 6|| ||Bulb||LAN||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Ceiling 4|| ||Bulb||Bulb||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===<sup>Yeelight</sup>===<br />
|Ceiling 10<br />
|YLXD10YL<br />
|Bulb<br />
|Bulb<br />
|Yeelight RGB Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Ceiling 15<br />
|YLXD42YL<br />
|Bulb<br />
|LAN<br />
|Yeelight RGB Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===<sup>Zemismart</sup>===<br />
|2 Gang Switch||ZM-02-DK||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Zemismart</sup>===<br />
|Zigbee Switch||ZM-01-DK||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zen|<sup>Zen</sup>]]===<br />
|Thermostat|| ||Thermostat||Zigbee||Zen Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zipato|<sup>Zipato</sup>]]===<br />
|Siren||PH-PSE02||Siren||Z-Wave||Zipato Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zipato|<sup>Zipato</sup>]]===<br />
|Bulb 2<br />
|RGBW2<br />
|Bulb<br />
|Z-Wave<br />
|Zipato Bulb 2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZLINK|<sup>ZLINK</sup>]]===<br />
|Water Leak and Temperature Sensor<br />
|ZL-LD-100<br />
|Water Sensor<br />
|Z-Wave<br />
|Zlink Water Leak and Temperature Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>ZLINK</sup>===<br />
|Appliance Switch<br />
|ZL-PA-100<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZLINK|<sup>ZLINK</sup>]]===<br />
|In-Wall Dimmer||ZL-WD-100<br />
|Dimmer||Z-Wave||Generic Z-Wave CentralScene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZLINK|<sup>ZLINK</sup>]]===<br />
|In-Wall Switch||ZL-WS-100<br />
|Switch||Z-Wave||Generic Z-Wave CentralScene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Smart Plug||ZEN06||Outlet||Z-Wave||Zooz Power Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Power Switch||ZEN15||Switch||Z-Wave||Zooz Power Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|MultiRelay<br />
|ZEN16<br />
|Switch<br />
|Z-Wave<br />
|Zooz MultiRelay<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Universal Relay<br />
|ZEN17<br />
|Relay<br />
|Z-Wave<br />
|Zooz Zen17 Universal Relay<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Power Strip||ZEN20||Power Strip||Z-Wave||Zooz Power Strip|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Power Strip VER 2.0||ZEN20||Power Strip||Z-Wave||Zooz Power Strip|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Smart Switch||ZEN21||Switch||Z-Wave||Zooz Central Scene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Dimmer Switch||ZEN22||Dimmer||Z-Wave||Zooz Central Scene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz On/Off Toggle||ZEN23||Switch||Z-Wave||Zooz Central Scene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz Dimmer Toggle||ZEN24||Dimmer||Z-Wave||Zooz Central Scene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz S2 On/Off Switch||ZEN26||Switch||Z-Wave||Zooz Central Scene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz S2 Dimmer||ZEN27||Dimmer||Z-Wave||Zooz Central Scene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz Double Switch<br />
|ZEN30<br />
|Switch<br />
|Z-Wave<br />
|Zooz Double Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz RGBW Dimmer<br />
|ZEN31<br />
|Dimmer<br />
|Z-Wave<br />
|Zooz RGBW Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Scene Controller Switch<br />
|ZEN32<br />
|Switch<br />
|Z-Wave<br />
|Zooz Zen32 Scene Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz Remote Switch<br />
|ZEN34<br />
|Button Controller<br />
|Z-Wave<br />
|Zooz Remote Switch Zen34<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Light Switch<br />
|ZEN71<br />
|Switch<br />
|Z-Wave<br />
|Zooz Zen71 Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Dimmer<br />
|ZEN72<br />
|Dimmer<br />
|Z-Wave<br />
|Zooz Zen72 Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Wall Switch<br />
|ZEN76<br />
|Switch<br />
|Z-Wave<br />
|Zooz Zen76 Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Dimmer Switch<br />
|ZEN77<br />
|Dimmer<br />
|Z-Wave<br />
|Zooz Zen77 Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Motion Sensor||ZSE02||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Motion and Light Mini Sensor||ZSE09||Motion Sensor||Z-Wave||Dome Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Motion Sensor ZSE18||ZSE18||Motion Sensor||Z-Wave||Zooz Motion Sensor ZSE18|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz S2 Multisiren||ZSE19||Siren||Z-Wave||Zooz S2 Multisiren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Outdoor Motion Sensor||ZSE29||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Water Sensor||ZSE30||Water Sensor||Z-Wave||Dome Leak Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Smart Chime||ZSE33||Doorbell||Z-Wave||Dome Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|4-in-1 Sensor||ZSE40||Motion Sensor||Z-Wave||Zooz 4-in-1 Sensor|| ||Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Water Valve||ZAC03<br />
|Valve||Z-Wave||Generic Z-Wave Valve|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZWP|<sup>ZWP</sup>]]===<br />
|Dimmer||WD-100||Dimmer||Z-Wave||Generic Z-Wave CentralScene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZWP|<sup>ZWP</sup>]]===<br />
|Switch||WS-100||Switch||Z-Wave||Generic Z-Wave CentralScene Switch|| ||<br />
|}<br />
<br />
<nowiki>*</nowiki>Note: Aeotec was formerly known as Aeon Labs.<br />
<br />
__NOEDITSECTION__<br />
__NOTOC__</div>Doughttps://docs.hubitat.com/index.php?title=Join_and_Reset_Instructions&diff=5185Join and Reset Instructions2021-07-26T16:02:21Z<p>Doug: </p>
<hr />
<div>{{Top}}<br />
<br />
<big>Before you can join your devices to your Hubitat Elevation hub, you must first remove them from the previous hub or bridge. While Zigbee devices can simply be removed and put into Paring Mode using the manufacturer's instructions, Z-Wave™ devices must be Excluded from their previous network before joining a new one. Exclusion will happen automatically when the device is removed from Hubitat Elevation, however it is recommend that Z-Wave devices always be factory reset as well. If a device cannot be factory reset, or is in an unknown state, then it is recommended to do a General Exclusion in your Hubitat Elevation hub to be sure it isn't joined to the former Z-Wave mesh. Typically the same button on the device for inclusion is also used for exclusion. If Hubitat Elevation doesn't show Unknown Device Excluded in the log, then the General Exclusion has failed and the device probably won't be able to be joined. See [[How to Build a Solid Z-Wave Mesh]] for further detail on methods of Exclusion.</big><br />
<br />
=='''<big>ADT</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ADT (Nortek)</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>10016864C</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover by rotating it counterclockwise<br />
#Press and hold the Connect button for '''5''' seconds<br />
#After the button is released, the LED will flash quickly for a few seconds, go dark for a few seconds, then flash slowly to indicate it is in pairing mode.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the cover by rotating it counterclockwise<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the Connect button for '''5''' seconds<br />
#After the button is released, the LED will flash quickly for a few seconds, go dark for a few seconds, then flash slowly to indicate it is in pairing mode<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
=='''<big>AduroSmart</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>AduroSmart</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ERIA 81822</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use the provided pin to press and hold the reset button for 10 seconds.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Use the provided pin to press and hold the reset button for '''10''' seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>AduroSmart</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>ERIA 81825</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold down the two middle buttons until the light flashes green. A red flash indicates an unsuccessful reset.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold down the off (circle) button for '''10''' seconds until it flashes green '''3''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>AduroSmart</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ERIA 81823</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use the provided pin to press and hold the reset button for '''10''' seconds.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Use the provided pin to press and hold the reset button for '''10''' seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
=='''<big>Aeotec (Aeon Labs)</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW056</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Doorbell will now be reset to its original settings, and the Network LED will be solid for '''2''' seconds and then start slow flashing as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Doorbell Gen5, and its LED will flash rapidly to indicate that it is communicating.<br />
#If your Doorbell has been successfully linked to your network, its LED will become solid for '''2''' seconds, then stop. If linking was unsuccessful, the LED will flash when you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Doorbell.<br />
#If your Doorbell has been successfully unlinked to your network, its LED will begin to flash slowly indicating it is ready to be paired to a new network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW162-A</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds<br />
#Within '''2-5''' seconds, the test doobell sound will run, then stop after '''5''' seconds has elapsed.<br />
#From '''5-10''' seconds, the LED will begin to flash faster and faster still from '''10-20''' seconds.<br />
#After '''21''' seconds, the LED will quickly flash '''3''' times, and then the LED slowly pulse up and down as you hold down the Action Button.<br />
#With the LED pulsing, release the Action button, and the Doorbell 6 will be reset to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power Doorbell 6 through the provided power adapter.<br />
#Ensure that Doorbell 6 LED is flashing slowly.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the Doorbell 6 Action Button once.<br />
#If Doorbell 6 has successfully paired to your Z-Wave gateway, the LED will be a solid color for '''30''' seconds, then turn off.<br />
#If is fails to join the Z-Wave network, the LED will flash slowly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button '''6''' times in '''2''' seconds.<br />
#If your Doorbell 6 has been successfully unpaired from the Z-Wave network, its LED will begin to flash slowly, indicating it is ready to join a Z-Wave network again.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW112</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold Door Window Sensor 6 Action button<br />
#Wait until the RGB LED turns into a Green Color, and then release. (LED will change from Yellow, Purple, Red, then to Green)<br />
#If your MultiSensor has been successfully factory reset from its previous network, the RGB LED will be active with a colorful gradient for '''3''' seconds. When you press the Action Button on MultiSensor, its green LED will flash. If the removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the button on the Door Window Sensor 6<br />
#The LED will flash green to indicate successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your Door Window Sensor is successfully removed from the Z-Wave network, the RGB LED will become a colorful gradient for a few seconds and then turn off. If the removing was unsuccessful, the RGB LED will be solid for 8 seconds and then turn off, repeat the above steps.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW120</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and Status LED will be solid for '''2''' seconds to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once to include the door/window sensor.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your Door Window Sensor has been successfully removed from your Z-Wave network, its Status LED will fast flash for '''8''' seconds and then slow flash for '''3''' seconds when you press the Action Button again.<br />
#If the removal was unsuccessful, the Status LED will fast flash for '''2''' seconds and then be solid for '''2''' seconds when you press the Action Button, repeat the above steps.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor Gen2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSB29</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and Status LED will be solid for '''2''' seconds to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once to include the door/window sensor.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor to exclude it from the network<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor 1E</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSB04100</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the sensor to a default state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the security tamper switch located at the back of the Aeon Labs Door/Window Sensor to include it in the network<br />
#The sensor will now stay awake for '''10''' minutes to receive network instructions. The LED on the will be flashing while awake.<br />
#*Note: The DSB04100 sensor can only be taught to communicate to devices within its own network.<br />
#*If the Aeon Labs Door / Window Sensor was not included in a Z-Wave network, pressing the security switch will illuminate the LED solid red on the front of the sensor for '''5''' seconds.<br />
#*If the sensor was successfully included in the Z-Wave network, the LED will flash instead of staying solid.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Use an Aeon Z-Stick or Minimote to exclude the sensor from previous networks<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Controller Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW062</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and release.<br />
#Your Garage Door Controller will now be reset to its original settings, and the Network LED will be solid for '''2''' seconds and then start slow flashing to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on the Garage Door Controller.<br />
#The LED on Garage Door Controller will flash rapidly, followed by a solid LED for '''1-2''' second for a successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave Button on the Garage Door Controller.<br />
#The LED on Garage Door Controller will flash rapidly, followed by a solid LED for '''1-2''' second for a successful exclusion.<br />
#The Network LED on the Garage Door Controller should now be flashing slowly to indicate it is ready to be paired to a new network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dry Contact Sensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW097</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and Status LED will be solid for '''2''' seconds to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your Sensor has been successfully linked to your network, its LED will become solid for '''2''' seconds, then disappear.<br />
#If linking was unsuccessful, the LED will continue to flash if you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your switch has been successfully unlinked to your network, its LED will begin to flash for a short time.<br />
#If unlinking was not successful, the LED will return to its last state. Tap the button to confirm if it has been unpaired, if unpaired successfully, the LED will flash when tapped.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Aeon Labs Home Energy Meter</big>'''</div><br />
|<div style="text-align: center;">'''<big>AEDSB09104ZWUS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Energy Meter</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''10''' seconds.<br />
#If successful, the LED on the HEM should begin to flash slowly.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Remove the screw from the back of your Reader and open the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button (small black button under the battery tray) on your reader. If your Reader has been successfully linked to your network, its light will remain solid for '''1''' second. If the linking was unsuccessful the light will flash after pressing your meter’s Action Button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the screw from the back of your Reader and open the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button (small black button under the battery tray) on your reader. If your Reader has been successfully removed from your network, its light will flash for '''1''' second.<br />
#If the removal was unsuccessful the light will be solid after pressing your meter’s Action Button.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Home Energy Meter Gen2 / Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW095</big>'''</div><br />
|<div style="text-align: center;">'''<big>Energy Meter</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''10''' seconds.<br />
#If successful, the LED on the HEM should begin to flash slowly.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the Action Button on your HEM. If it has been successfully linked to your network, its LED will remain illuminated. If the linking was unsuccessful, your HEM’s LED will continue to flash.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your HEM. If it has been successfully removed from your network, its LED will flash. If the removal was unsuccessful, its LED will be solid and it will be then repeated again.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>LED Bulb Gen5</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW098</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Removing LED Bulb from your Z-Wave network will reset LED Bulb to default factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#With LED Bulb in its fitting, wait '''2''' seconds. Now toggle your wall switch ON. LED Bulb’s green LED will flash to indicate that it is looking for a Z-Wave network to connect to.<br />
#After successfully connecting to your network, LED Bulb will illuminate. If a network connection has failed, it will remain without light.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Turn LED Bulb’s wall switch on.<br />
#Toggle LED Bulb’s wall switch off, on, off, on, off, on within '''2''' seconds. The LED should flash orange, and if successful, the orange LED will be solid for '''2''' seconds before becoming a white color. LED Bulb should now be removed from your Z-Wave network.<br />
#To confirm successful removal its color will change to orange for '''2''' seconds before changing to white. If removal was unsuccessful, LED Bulb will flash orange for '''3''' seconds before changing to red for '''2''' seconds.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>LED Bulb 6 Multi-Color</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn LED Bulb’s wall switch on and wait '''1''' second.<br />
#Toggle LED Bulb's wall switch '''6''' times ('''off -> on, off -> on, off -> on, off -> on, off -> on, off -> on''') between '''0.5 - 2''' seconds per re-power.<br />
#If successful, the LED Bulb 6 Multi-Color will change to a warm white, solid yellow, then flash red -> white '''3''' times to indicate a successful factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#With LED Bulb in its fitting, toggle your wall switch ON. LED Bulb’s LED will turn into a solid yellow color to indicate that it is in pair mode up to '''10''' seconds.<br />
#After successfully connecting to your network, LED Bulb will flash green -> white color for '''3''' seconds. If a network connection has failed, LED Bulb 6 Multi-Color will flash red -> white for '''3''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle LED Bulb’s wall switch '''3''' times ('''off > on''', '''off > on''', '''off > on''') between '''0.5 - 2''' seconds per cycle.<br />
#LED Bulb 6 has been unpaired successfully, the LED will flash blue > white for '''3''' seconds.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>LED Bulb 6 Multi-White</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn LED Bulb’s wall switch on and wait '''1''' second.<br />
#Toggle LED Bulb's wall switch 6 times ('''off -> on, off -> on, off -> on, off -> on, off -> on, off -> on''') between '''0.5 - 2''' seconds per re-power.<br />
#If successful, the LED Bulb 6 Multi-White will flash twice to indicate that it successfully reset itself to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#With LED Bulb in its fitting, toggle your wall switch ON. LED Bulb’s LED will flash '''2''' times to indicate that it is looking for a Z-Wave network to connect to.<br />
#After successfully connecting to your network, LED Bulb will flash off then on in about '''0.5''' second to indicate that it attempted to pair to your network. If a network connection has failed, LED Bulb 6 Multi-White will not react.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Turn LED Bulb’s wall switch on and wait '''1''' second.<br />
#Toggle LED Bulb’s wall switch 3 times ('''off > on''', '''off > on''', '''off > on''') between '''0.5 - 2''' seconds per cycle.<br />
#LED Bulb 6 if successful will flash once, dim to 5% for '''5''' seconds, then increase to 100% dim level to indicate a successful unpair and factory reset.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro Illuminator G2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC19103-ZWUS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the Z-Wave button for '''30''' seconds and release it to reset the entire module including Z‐Wave to factory default settings (the LED will stay solid after holding the button for '''30''' seconds).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Connect Micro Smart Dimmer to an AC‐input power source.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z‐Wave button.<br />
#If the inclusion fails, please repeat the process from step 2.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z‐Wave button.<br />
#If the exclusion fails, please repeat the process from step 2<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro Motor Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC14104-ZWEU/US, DSC14103-ZWAU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motor Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the controller to a default state.<br />
<br />
'''Join the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#Connect Micro Motor Controller to an AC‐input power source.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If Micro Motor Controller has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press the Action Button on the Z-Stick to take it out of installation mode.<br />
<br />
'''Join the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#Connect Micro Motor Controller to an AC‐input power source.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions<br />
#Press the Include button on your Minimote.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If the Micro Motor Controller has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press any button on your Minimote to take it out of inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If your Micro Motor Controller has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press the Action Button on the Z-Stick to take it out of removal mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Remove Button on your Minimote.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If your Micro Motor Controller has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press any button on your Minimote to take it out of removal mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dual Micro Switch G2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DCS17</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button on the Micro Double Smart Energy Switch G2 for '''20''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the Micro Double Smart Energy Switch G2 is installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch 6 times (ON to OFF or OFF to ON).<br />
#If the Micro Double Smart Energy Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If the Micro Double Smart Energy Switch G iis installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch '''6''' times (ON to OFF or OFF to ON).<br />
#If the Micro Double Smart Energy Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro Switch G2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC26 / DCS18</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button on the Micro Switch G2 for '''20''' seconds and then release it.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the Micro Switch G2 is installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch 6 times (ON to OFF or OFF to ON).<br />
#If the Micro Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If the Micro Switch G2 is installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch '''6''' times (ON to OFF or OFF to ON).<br />
#If the Micro Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Minimote</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSA03202</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Pull down the panel on the Minimote<br />
#Press and hold the bottom '''2''' buttons down. The Red and Blue LED will alternate faster and faster.<br />
#When both Red and Blue LED become solid, you may let go.<br />
<br />
'''Include a device''' '''from the Z-Wave Network'''<br />
<br />
#Tap the Inclusion (+) button, LED should be flashing blue<br />
#Tap the button on the device you want to add<br />
#After the LED stops flashing rapidly, tap any button to get out of inclusion mode<br />
<br />
'''Exclusion a device from the Z-Wave Network'''<br />
<br />
#Tap the Exclusion (-) button, LED should flash red<br />
#Tap button on the device you want to remove<br />
#After LED stops flashing rapidly, tap any button to get out of the exclusion mode<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multisensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW074</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold Multisensor Gen5 Action button (For '''20''' seconds)<br />
#The LED of the Multisensor Gen5 will flash faster and faster. At '''20''' seconds, the LED should become solid for '''1-2''' seconds to confirm factory reset.<br />
#Release the Multisensor Gen5 Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on your MultiSensor.<br />
#You can test if your MultiSensor has been successfully synced with your Z-Wave network by pressing its Z-Wave Button. If you press the button and your sensor’s LED illuminates for a few seconds, then syncing has been successful.<br />
#If the LED flashes when the button is pressed, the syncing has been unsuccessful and you should repeat the above steps.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave Button on your MultiSensor.<br />
#If your MultiSensor has been successfully removed from your network, its LED will flash when you press the Z-wave Button.<br />
#If the removal was unsuccessful, the LED will stay solid for a few seconds when you press the Z-wave Button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multisensor 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW100</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the Action Button on your MultiSensor. The LED on Multisensor will flash red then change into a colorful gradient.<br />
#If your MultiSensor has been successfully removed from your network, the RGB LED will be active with a colorful gradient for '''3''' seconds. When you press the Action Button on MultiSensor, its green LED will flash.<br />
#If the removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your MultiSensor. The LED on Multisensor will flash Green rapidly, followed by a solid Green LED for '''1''' second for a successful inclusion, or a solid red LED for '''1''' second for a failed inclusion.<br />
#You can test if your MultiSensor has been successfully included into your Z-Wave network by pressing its Action Button. If you press the button and your sensor's green LED is solid for a few seconds, then inclusion has been successful.<br />
#If the green LED flashes when the button is pressed, the inclusion has been unsuccessful and you should repeat the steps from step 1.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your MultiSensor. The LED on Multisensor will flash red then change into a colorful gradient.<br />
#If your MultiSensor has been successfully removed from your network, the RGB LED will be active with a colorful gradient for '''3''' seconds. When you press the Action Button on MultiSensor, its green LED will flash.<br />
#If the removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>NanoMote One</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA004</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the NanoMote button for '''20''' seconds.<br />
#The LED will change from: Orange > Green > Red > Pink > Red<br />
#Release the button on the second Red LED status. It will remain Red for '''2''' seconds<br />
#Tap button again while second Red LED is illuminated (you'll have '''2''' seconds to do so).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Double click the NanoMote button, the LED will flash rapidly with a white color.<br />
#If your NanoMote has been successfully added to your Z-Wave network, its white LED will be solid for about '''10''' seconds, then flash green to indicate it is awake.<br />
#If the adding was unsuccessful and the red LED will be solid for '''2''' seconds and then off, repeat the above steps.<br />
#*If your NanoMote does not go to sleep on its own, press and hold for '''2''' seconds (or until LED turns orange) then release its button to put your NanoMote to sleep.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Double click the NanoMote button, the LED will become a solid green color.<br />
#If your NanoMote has been removed from your Z-Wave network, its LED will begin cycling through a rainbow of colors.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>NanoMote Quad</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the NanoMote button for '''20''' seconds.<br />
#The LED will change from: Orange > Green > Red > Pink > Red<br />
#Release the button on the second Red LED status. It will remain Red for '''2''' seconds<br />
#Tap button again while second Red LED is illuminated (you'll have '''2''' seconds to do so).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Double click the NanoMote button (can be any button), the LED will flash rapidly with a white color.<br />
#If your NanoMote has been successfully added to your Z-Wave network, its white LED will be solid for about '''10''' seconds, then flash green to indicate it is awake.<br />
#If the adding was unsuccessful and the red LED will be solid for '''2''' seconds and then off, repeat the above steps.<br />
#*If your NanoMote does not go to sleep on its own, press and hold for '''2''' seconds (or until LED turns orange) then release its button to put your NanoMote to sleep.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Double click the NanoMote button, the LED will become a solid green color.<br />
#If your NanoMote has been removed from your Z-Wave network, its LED will begin cycling through a rainbow of colors.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Nano Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW111</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on the Nano Dimmer, the '''Green''' LED (basic secure indication) will flash to indicate the Nano Dimmer is entering into pairing mode.<br />
#If the Nano Dimmer has been successfully added to your Z-Wave network, its RGB LED will be solid.<br />
#If the pairing was unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then remain a colorful gradient, repeat the steps above.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Nano Switch (with energy reading)</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW116</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on the Nano Switch.<br />
#If inclusion is successful, the '''Green''' LED will be on for '''2''' seconds, and then return to a solid indication. If inclusion is unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then return to a colorful gradient.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dual Nano Switch (with energy reading)</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW132</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on the Dual Nano Switch.<br />
#If inclusion is successful, the '''Green''' LED will be on for '''2''' seconds, and then return to a solid indication. If inclusion is unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then return to a colorful gradient.<br />
<br />
'''Exclusion from the Z-Wave Network''';<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Nano Switch (without energy reading)</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW139</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on the Nano Switch.<br />
#If inclusion is successful, the '''Green''' LED will be on for '''2''' seconds, and then return to a solid indication. If inclusion is unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then return to a colorful gradient.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender (Aeon Labs Z-Wave Network Repeater)</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSD37</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the Range Extender to a default state.<br />
<br />
'''Join the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#If Range Extender has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press the Action Button on the Z-Stick to take it out of installation mode.<br />
<br />
'''Join the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions<br />
#Press the Include button on your Minimote.<br />
#If the Range Extender has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press any button on your Minimote to take it out of inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#If your Range Extender has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press the Action Button on the Z-Stick to take it out of removal mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Remove Button on your Minimote.<br />
#If your Range Extender has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press any button on your Minimote to take it out of removal mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW117</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave Button for '''20''' seconds to completely factory reset your Range Extender 6.<br />
#During the time that you are holding your Range Extender 6 action button down, the LED will flash through these colors: Yellow (at '''2''' seconds) > Purple (at '''5''' seconds) > Red for '''8''' seconds (initializing factory reset) > Green for '''20''' seconds (factory reset complete) > Rainbow LED (ready to be paired to a new gateway).<br />
#You may let go when the LED turns green. Your Range Extender will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on your Range Extender and quickly release the button (should only be a quick tap action on the button) and its LED will flash green rapidly (green indicates insecure pairing, if you want to pair securely, please refer to Enabling Security Encryption section in the Advanced Function section).<br />
#If Range Extender has been successfully added to your Z-Wave network, its LED will be solid for '''2''' seconds then turn off. If the adding was unsuccessful, the red LED will be on for '''2''' seconds and then remain colorful gradient status, repeat the steps above.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave Button on your Range Extender.<br />
#If Range Extender has been successfully removed from your network, its RGB LED will remain colorful gradient status.<br />
#If the removal was unsuccessful, the RGB LED will still be solid, repeat the steps above.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender 7</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW189</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave Button for '''20''' seconds to completely factory reset your Range Extender 7.<br />
#During the time that you are holding your Range Extender 7 action button down, the LED will cycle through these stages: OFF (at '''1''' second) > Pulsing (at '''2''' seconds) > Flash (at '''5''' seconds) > Fast Flashing (at '''10''' seconds) > '''Solid for 2''' '''seconds''' then pulsing (at '''20''' seconds) indicating factory reset complete.<br />
#You may let go of the button. Your Range Extender has now be reset to its original settings, and the LED will continuously pulse until added again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on your Range Extender 7 and quickly release the button (should only be a quick tap of the action button).<br />
#The Range Extender 7 will quickly flash its '''White''' LED up to '''30 seconds''', or until it is paired successfully.<br />
#If successfully paired, the LED light will become brighter. If pairing fails, the LED will return to slow pulsing.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button on your Range Extender 7.<br />
#If Range Extender has been successfully removed from your network, its LED will be slowly pulsing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Recessed Door Sensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW089</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it. Your sensor will now be reset to its original settings<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Sensor. If your Sensor has been successfully linked to your network, its LED will become solid for '''2''' seconds then disappear.<br />
#If linking was unsuccessful, the LED will continue to flash if you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor. If your switch has been successfully unlinked to your network, its LED will begin to flash for a short time.<br />
#If linking was unsuccessful, the LED will return to its last state. Tap the button to confirm if it has been unpaired, if unpaired successfully, the LED will flash when tapped.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW080</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds<br />
#At 8 seconds, the Siren will sound for '''1''' second, then stop<br />
#The LED will continue to flash faster and faster and then will then turn solid for '''2''' seconds to indicate a successful factory reset<br />
#You may let go of its Action button, and the Siren Gen5 factory reset is complete.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Siren Gen5, and its LED will flash rapidly to indicate that it is communicating.<br />
#If your Siren has been successfully linked to your network, its LED will become solid for '''2''' seconds, then stop.<br />
#If linking was unsuccessful, the LED will flash when you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Siren.<br />
#If your Siren has been successfully unlinked from your network, its LED will begin to flash.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW164-A</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds<br />
#Within '''2-5''' seconds, the test siren sound will run, then stop after '''5''' seconds has elapsed.<br />
#From '''5-10''' seconds, the LED will begin to flash faster and faster still from '''10-20''' seconds.<br />
#After '''21''' seconds, the LED will quickly flash '''3''' times, and then the LED slowly pulse up and down as you hold down the Action Button.<br />
#With the LED pulsing, release the Action button, and the Siren 6 will be reset to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power Siren 6 through the provided power adapter.<br />
#Ensure that Siren 6 LED is flashing slowly.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly tap the Siren 6 Action Button once.<br />
#If Siren 6 has successfully joined your Z-Wave network, the LED will emit a solid color for '''30''' seconds, then turn off.<br />
#If the Siren 6 failed to pair, the LED will continue to flash slowly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button '''6''' times within '''2''' seconds .<br />
#If your Siren 6 has been successfully excluded from the Z-Wave network, its LED will begin to flash slowly which indicates that it is ready to be paired again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Energy Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC06106</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the sensor to a default state. If the Smart Energy Switch was removed from the Z-Wave network, the LED will be flashing. If it was not successfully removed from the Z-Wave network, the LED will either be solid '''ON''' or '''OFF''' (depending on if the switch is on or off).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the device to include it in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Use an Aeon Z-Stick or Minimote to exclude the sensor from previous networks. If the Smart Energy Switch was removed from the Z-Wave network, the LED will be flashing. If it was not successfully removed from the Z-Wave network, the LED will either be solid '''ON''' or '''OFF''' (depending on if the switch is on or off).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW096 / ZW110</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds.<br />
#The LED will change between these colors: Yellow > Purple > Red (flashs faster and faster) > Green (Successful indication of factory reset) > Rainbow LED (waiting to pair to new network).<br />
#When the LED changes to Green state, you may let go of the action button.<br />
#When the LED changes to a rainbow LED state, it will indicate that it is ready to pair to a new network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Switch once and the LED will flash a green LED.<br />
#If your switch has been successfully linked to your network, its LED will become solid green for '''2''' seconds.<br />
#If linking was unsuccessful, the LED will return to a rainbow gradient.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Switch.<br />
#If your switch has been successfully unlinked from your network, its LED will become a rainbow gradient.<br />
#If linking was unsuccessful, the LED will become green or purple depending on how your LED mode is set.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>TriSensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA005</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''15''' seconds.<br />
#The red LED flashes to confirm a successful factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your sensor once.<br />
#The LED will turn yellow LED for '''10''' seconds.<br />
#If the LED flashes green twice, then the sensor has successfully joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your sensor.<br />
#The LED will turn purple for '''2''' seconds, and then white when exclusion is successful.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>WallMote Quad</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW129</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds.<br />
#The LED should flash between green, purple, then red which will flash rapidly until a green LED becomes solid for '''2''' seconds to indicate a successful factory reset.<br />
#Let go of the Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on WallMote Quad to include it.<br />
#The green LED will be on for '''2''' seconds and then the orange LED will fast flash for '''10''' minutes (if the WallMote Quad does not receive the Wake Up No More Info command from primary Controller) to indicate the inclusion is successful.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your WallMote Quad.<br />
#If your WallMote Quad is successfully removed from the Z-Wave network, the LED will become a colorful gradient for a few seconds and then turn off.<br />
#If the removal was unsuccessful, the red LED will be solid for '''2''' seconds and then turn off, repeat the above steps.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>WallMote Quad</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW130</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds.<br />
#The LED should flash between green, purple, then red which will flash rapidly until a green LED becomes solid for '''2''' seconds to indicate a successful factory reset.<br />
#Let go of the Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on WallMote Quad to include it.<br />
#The green LED will be on for '''2''' seconds and then the orange LED will fast flash for '''10''' minutes (if the WallMote Quad does not receive the Wake Up No More Info command from primary Controller) to indicate the inclusion is successful.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your WallMote Quad.<br />
#If your WallMote Quad is successfully removed from the Z-Wave network, the LED will become a colorful gradient for a few seconds and then turn off.<br />
#If the removal was unsuccessful, the red LED will be solid for '''2''' seconds and then turn off, repeat the above steps.<br />
<br />
<hr /><br />
<br />
=='''<big>Alfred</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Alfred</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>DB2 / DB2-B</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the door and keep the lock bolt in the unlock position.<br />
#Open the battery box to access the reset button.<br />
#Using a pointed object, press and hold the reset button.<br />
#Keep the reset button held down while removing and replacing one of the batteries.<br />
#Keep holding the reset button down until you hear the voice guidance.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Touch the lock screen with your hand to activate it.<br />
#Press * twice, followed by your master PIN code and #<br />
#Digits 1-8 on the keypad should lightup in response.<br />
#Enter '''8''', followed by '''1''' to put the lock into inclusion mode.<br />
#*'''NOTE:''' It is recommended that you delete all user codes from the lock if any are previously existing and use Hubitat Elevation™ Lock Code Manager to program the lock.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#You must have your lock first connected to the August App<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Touch the lock screen with your hand to activate it.<br />
#Press * twice, followed by your master PIN code and #<br />
#Digits 1-8 on the keypad should lightup in response.<br />
#Enter '''8''', followed by '''2''' to put the lock into exclusion mode.<br />
<br />
<hr /><br />
<br />
=='''<big>August</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>August</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Lock Pro</big>'''</div><br />
|<div style="text-align: center;">'''<big>ASL-03</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#You must have your lock first connected to the August App<br />
#Go into Lock Settings > Z-Wave Settings. If you are connected, you will see Remove Z-Wave Device. Select Remove Z-Wave Device and on the next page you will see two options:<br />
#*My Hub is in Exclusion Mode - use this mode when you have working hub and can properly disconnect.<br />
#*My Hub is No Longer Working - use this mode to RESET the Device.<br />
#Select the '''My Hub is No Longer Working''' option and then select '''Reset Z-Wave Device'''.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#You must have your lock first connected to the August App<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the August App, go into Lock Settings and door for Z-Wave Settings.<br />
#The first time the screen will state that "The Lock is not connected to a Z-Wave Network". Select "Add to a Z-Wave Network".<br />
#Follow the instructions to put the lock into Learn Mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#You must have your lock first connected to the August App<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Go into Lock Settings > Z-Wave Settings. If you are connected, you will see Remove Z-Wave Device.<br />
#Select Remove Z-Wave Device and on the next page you will see two options.<br />
#*My Hub is in Exclusion Mode - Use this mode when you have a working hub and can properly disconnect.<br />
#*My Hub is No Longer Working - Use this mode to RESET the Device.<br />
#Select the My Hub is in Exclusion Mode option to exclude the lock from the Z-Wave network.<br />
<br />
<hr /><br />
<br />
=='''<big>Aurora</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aurora</big>'''</div><br />
|<div style="text-align: center;">'''<big>AOne Smart Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>AU-A1ZBRC</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press and hold the pairing button for '''3''' seconds before releasing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the pairing button for '''3''' seconds before releasing. The light on the front of the remote will flash periodically to confirm it is searching for the hub.<br />
#The light on the remote will remain solid for '''10''' seconds to confirm pairing was successful.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press and hold the pairing button for '''3''' seconds before releasing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aurora</big>'''</div><br />
|<div style="text-align: center;">'''<big>AOne Smart Plug-In Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>AU-A1ZBPIAB</big>'''</div><br />
|<div style="text-align: center;">'''<big>Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Plug in the socket.<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the pairing button for '''6''' seconds before releasing. The light on the device will begin flashing.<br />
#The light on the smart socket will stop flashing when pairing is sucessful.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aurora</big>'''</div><br />
|<div style="text-align: center;">'''<big>AOne Smart Double Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>AU-A1ZBDSS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
#Cycle mains power to the outlet.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#On initial power up, the device will automatically enter pairing mode for '''3''' '''minutes'''.<br />
#Pairing is indicated by the LED light around the button flashing '''Blue''' quickly.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
#Cycle mains power to the outlet.<br />
<br />
<hr /><br />
<br />
=='''<big>BeSense</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BeSense</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zwave PLUS Ceiling PIR Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>IX32</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch for '''6''' times to restore factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Activate the inclusion mode at the sensor by pressing the tamper switch '''3''' times.<br />
#Wait about '''15-30''' seconds while the sensor and hub finish the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper switch '''3''' times and the sensor will be removed from the Z-Wave network after '''15-30''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BeSense</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zwave Plus Window/Door Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM20</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch for '''6''' times to restore factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Activate the inclusion mode at the sensor by pressing the tamper switch '''3''' times.<br />
#Wait about '''15-30''' seconds while the sensor and hub finish the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper switch '''3''' times and the sensor will be removed from the Z-Wave network after '''15-30''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BeSense</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zwave PIR Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>IX30</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press the tamper switch for '''6''' times to restore factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Activate the inclusion mode at the sensor by pressing the tamper switch '''3''' times.<br />
#Wait about '''15-30''' seconds while the sensor and hub finish the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper switch '''3''' times and the sensor will be removed from the Z-Wave network after '''15-30''' seconds.<br />
<br />
<hr /><br />
<br />
=='''<big>BOSCH</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BOSCH</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ISW-ZPR1-WP13</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#Press upward on the tamper switch located in-between the batteries, keeping it engaged while you '''remove both batteries'''.<br />
#Wait at least '''4''' seconds, but do not release the tamper switch.<br />
#Keep the tamper switch engaged while you reinsert both batteries.<br />
#Release the tamper switch. The device is now reset to factory default settings.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Pairing''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#Remove both batteries for at least '''10''' seconds.<br />
#Reinsert both batteries. The LED on the front of the sensor will be solid for '''2''' seconds<br />
#The LED will begin to flash '''On''' > '''Off''' > '''On''' > '''Off''' > '''On''' > '''Off''' (for '''5''' seconds) and will continue to flash in this cycle for up to '''3''' minutes<br />
#If the motion sensor does not pair with the hub in less than '''3''' minutes, perform a factory reset and repeat the above steps to join the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BOSCH</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ISW-ZDL1-WP11G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#Press upward on the tamper switch located in-between the batteries, keeping it engaged while you '''remove both batteries'''.<br />
#Wait at least '''4''' seconds, but do not release the tamper switch.<br />
#Keep the tamper switch engaged while you reinsert both batteries.<br />
#Release the tamper switch. The device is now reset to factory default settings.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Pairing''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#Remove both batteries for at least '''10''' seconds.<br />
#Reinsert both batteries. The LED on the front of the sensor will be solid for '''2''' seconds<br />
#The LED will begin to flash '''On''' > '''Off''' > '''On''' > '''Off''' > '''On''' > '''Off''' (for '''5''' seconds) and will continue to flash in this cycle for up to '''3''' minutes<br />
#If the motion sensor does not pair with the hub in less than '''3''' minutes, perform a factory reset and repeat the above steps to join the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<hr /><br />
<br />
=='''<big>Centralite</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>Pearl Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>3000-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Enter Programming Mode, navigate to Menu ID “17”, press HOLD, then navigate to option “11”, then press HOLD again.<br />
#The device will then factory reset itself and begin looking for an open network to join.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter Programming Mode, navigate to Menu ID “17”, press HOLD, then navigate to option “11”, then press HOLD again.<br />
#The device will then factory reset itself and begin looking for an open network to join.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Smart Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>3200-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Door & Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3300-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3305-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Micro Door Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3323-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Micro Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3328-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>4-Series Smart Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>4200-C</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
#After the Smart Outlet has successfully joined a ZigBee network, the status LED will turn solid green<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
<hr /><br />
<br />
=='''<big>CREE</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>CREE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Connected LED Bulbs</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn ON the bulb > pause '''1''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''1''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''1''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb<br />
#The bulb will flash once, indicating it is reset and ready for pairing<br />
<br />
'''Factory Reset (Alternate Method)'''<br />
<br />
*'''''Method 1 - Use a Philips Hue Dimmer Switch'''''<br />
<br />
#Turn the bulb on (ensure there are no others in the same lamp, as they could be reset too, using this method).<br />
#Hold the remote within '''4''' inches of the bulb.<br />
#Press and hold the 1st (On / I in some countries) and the 4th (Off / O in some countries) buttons simultaneously for about '''10''' seconds, until the bulb starts flashing on and off.<br />
#If the bulb stopped flashing (it will normally turn fully on again after reset) and the green LED on the remote (top left of the remote) flashed green - your bulb is reset.<br />
#*''This method can be used for nearly ALL ZigBee LL bulbs.''<br />
<br />
*'''''Method 2 - Use a Lutron LZL-4B Connected Bulb Remote (Discontinued Product)'''''<br />
<br />
#Hold the remote within '''4''' inches of the bulb.<br />
#Press and hold the 2nd (up arrow) and 4th (light off) buttons simultaneously.<br />
#The bulb should flash on and off<br />
#The green LED on the remote should come on and may flash a few times.<br />
#Continue to hold both buttons on the remote until the green LED goes off completely.<br />
#*''This method can be used for nearly ALL ZigBee LL bulbs.''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Turn ON the bulb > pause '''2''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''2''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''2''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb<br />
#The bulb will flash once, indicating it is reset and ready for pairing<br />
<br />
'''Join the Zigbee Network''' '''(Alternate Method)'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#See '''Factory Reset (Alternate Method)''' above to reset the bulb and put it into pairing mode.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
<br />
=='''<big>Dome</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMWD1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the Cover and make sure the Door/Window Sensor is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED indicator flashes once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Cover of the Door/Window Sensor.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the Cover of the Door/Window Sensor.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMDP1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the Sensor Cover and confirm that your Door/Window Sensor is powered up.<br />
#Wait for '''5''' seconds.<br />
#Move the Magnet and Sensor Base in and out of the closed position '''6''' times.<br />
#The LED indicator will light up Red for '''5''' seconds when reset successfully. The Door/Window Sensor’s memory will be erased to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Sensor Cover and the LED indicator will start flashing yellow.<br />
#Press the Button quickly '''3''' times in a row.<br />
#The device will enter inclusion mode for two minutes and the LED indicator will alternate between green and red. After successful inclusion, the LED Indicator will flash green '''3''' times then flash red until the cover is replaced.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the SENSOR COVER and the LED indicator will start flashing red.<br />
#Press the Button quickly '''3''' times in a row.<br />
#The LED Indicator will flash green '''3''' times indicating successful exclusion from the Z-Wave network. It will continue flashing red (indicating tamper) until the cover is replaced.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMWS1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the Back Plate and make sure the Leak Sensor is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED indicator flashs once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Leak Sensor by twisting it apart.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the cover of the Leak Sensor by twisting it apart.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMMS1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the Cover and make sure the Motion Detector is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED indicator flashes once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Motion Detector by twisting it apart.<br />
#Press the Connect Button quickly '''3''' times in a row.<br />
#The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the cover of the Motion Detector by twisting it apart and make sure the Motion Detector is powered.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mouser</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMMZ1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mouse Trap</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the TOP COVER by sliding it back and lifting up. Confirm that your Mouser is powered up.<br />
#Press and hold the CONNECT BUTTON for at least '''10''' seconds then release.<br />
#A flashing LED indicator indicates a successful factory reset. The Mousers memory will be erased to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the TOP COVER by sliding it back and lifting up. Confirm that your Mouser is powered up.<br />
#Press the CONNECT BUTTON quickly '''3''' times in a row.<br />
#The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the TOP COVER by sliding it back and lifting up. Confirm that your Mouser is powered up.<br />
#Press the CONNECT BUTTON quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>On/Off Plug-In Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMOF1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Plug in the On/Off Plug-In Switch.<br />
#Hold the Connect Button for '''10''' seconds until the LED Indicator flashes once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug in the On/Off Plug-In Switch within range of your Z-Wave Controller.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMEX1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the Button for '''10''' seconds until the LED flashes '''10''' times, then release the button<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#For proper inclusion, install the Range Extender in the final location where it will be used.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Plug the Range Extender into an outlet or use a micro USB (not included) to power it. The LED will flash '''5''' times indicating successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Button quickly '''3''' times in a row The LED will flash '''5''' times indicating successful exclusion.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMS01</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the Back Plate and make sure the Siren is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED Ring flashs once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Back Plate of the Siren.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED Ring will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the Back Plate of the Siren.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED Ring will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Main Shut-Off</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMWV1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Shutoff Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the open/close button for at least '''10''' seconds then release.<br />
#The Shut-Off’s memory will be erased to factory settings. A flashing light indicates a successful factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the Water Main Shut-Off is powered on, then press the “open/close” button quickly '''3''' times in a row. The LED will stop flashing and stay on continuously upon successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#When prompted, press the “open/close” button on the Shut-Off quickly '''3''' times in a row.<br />
<br />
<hr /><br />
<br />
=='''<big>Dragon Tech</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dragon Tech</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug in Z-Wave Plus Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>PD-100</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug the PD-100 and anything the is plugged into it.<br />
#Press and hold the button on the front of the PD-100<br />
#Plug the PD-100 in while still pressing the button<br />
#After '''3''' seconds, release the button. If the button flashes, the PD-100 has been successfully reset. If not, repeat the steps to factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the front of the PD-100<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button on the front of the PD-100<br />
<br />
<hr /><br />
<br />
==<big>'''Eaton''' '''(Cooper Wiring Devices)'''</big>==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eaton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wireless Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>RF9540</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the device switch once to exclude it from the network. The LED will start flashing, indicating the dimmer has been successfully excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Cooper Wiring Devices Z-Wave device has a blue LED, which will flash when the device is not included in a Z-Wave network. The LED stops flashing when the device is in a network.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the device switch once to include it in the network. The LED will stop flashing, indicating the dimmer has been successfully included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the device switch once to exclude it from the network. The LED will start flashing, indicating the dimmer has been successfully excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Ecolink</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DWZWAVE2.5-ECO</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#When the exclusion process is complete, the LED on the sensor will be solid blue, then go out.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#When the inclusion process is complete, the LED on the sensor will be solid blue, then go out.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#When the exclusion process is complete, the LED on the sensor will be solid blue, then go out.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood/Freeze Sensor</big>''' </div><br />
|<div style="text-align: center;">'''<big>FLF-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#The Flood Freeze sensor factory defaults on network exclusion<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for '''1''' second, then reinstall it.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''10''' seconds, then reinstall it.<br />
#If the LED starts flashing continuously, the sensor has no node ID and was not successfully added, so start from step 1 again. Make sure to remove the battery for '''10''' seconds if adding to a Z-Wave network fails.<br />
#If after '''5''' seconds the LED is not flashing, look on Hubitat Elevation™ for feedback on whether the sensor was added successfully. If you do not see any feedback that the sensor was added, follow directions for exclusion of the sensor from a Z-Wave network, and then try adding the sensor again. If you are still having problems, you may need to add Z-Wave repeaters in-between the controller and the sensor.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Open the Flood Freeze case and remove the battery for '''1''' second.<br />
#Replace the battery and the device should be removed from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor with Pet Immunity</big>''' </div><br />
|<div style="text-align: center;">'''<big>PIR-ZWAVE2.5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter inclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the inclusion process.<br />
#Test the sensor before mounting it permanently. Check Hubitat Elevation™ device details status to observe changes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter exclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the exclusion process from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>SC-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug in the Z-Wave Plus Siren and verify a single beep sound is heard.<br />
#The LED on the front of the unit will turn off if successful exclusion from the network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Plug in the Z-Wave Plus Siren and verify a single beep sound is heard.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug in the Z-Wave Plus Siren and verify a single beep sound is heard.<br />
#The LED on the front of the unit will turn off if successful exclusion from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>FireFighter</big>'''</div><br />
|<div style="text-align: center;">'''<big>FF-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke/CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Open the FireFighter case and press the learn button on the device for '''1''' second.<br />
#If successfully removed from the Z-Wave Plus network, the devices Green LED should flash slowly continuously<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the FireFighter case and press the learn button on the device for '''1''' second.<br />
#If the LED starts flashing continually, the sensor has not been added. Repeat the steps.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Open the FireFighter case and press the learn button on the device for '''1''' second.<br />
#If successfully removed from the Z-Wave Plus network, the devices Green LED should flash slowly continuously<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DLS-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successfully included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch Double Toggle</big>''' </div><br />
|<div style="text-align: center;">'''<big>DTLS2-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch Dual Rocker</big>'''</div><br />
|<div style="text-align: center;">'''<big>DDLS2-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>''' </div><br />
|<div style="text-align: center;">'''<big>TILT-ZWAVE2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter inclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the inclusion process.<br />
#Test the sensor before mounting it permanently. The sensor LED will flash each time the sensor position is changed. Check Hubitat Elevation™ device details status to observe changes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter exclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the exclusion process from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>''' </div><br />
|<div style="text-align: center;">'''<big>TILT-ZWAVE2.5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter inclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the inclusion process.<br />
#Test the sensor before mounting it permanently. The sensor LED will flash each time the sensor position is changed. Check Hubitat Elevation™ device details status to observe changes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter exclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the exclusion process from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Toggle Light Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>TLS-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Pet Immune Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIRZB1-ECO</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the tamper switch while inserting one of the batteries<br />
#Release the tamper switch withing 4 seconds<br />
#The LED will flash 3 times every 5 seconds indicating the device is ready for paring<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press and hold the tamper switch while inserting one of the batteries<br />
#Release the tamper switch withing 4 seconds<br />
#The LED will flash 3 times every 5 seconds indicating the device is ready for paring<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the tamper switch while inserting one of the batteries<br />
#Release the tamper switch withing 4 seconds<br />
#The LED will flash 3 times every 5 seconds indicating the device is ready for paring again.<br />
<br />
<hr /><br />
=='''<big>Enerwave</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Enerwave</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ceiling Mounted PIR Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWN-BPC-Plus</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To reset the ZWN-BDC-PLUS, simply press the exclusion button on the sensor '''3''' times and hold for '''3''' seconds on the 3rd press.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion/exclusion button on the sensor '''3''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion/exclusion button on the sensor '''3''' times.<br />
<br />
<hr /><br />
=='''<big>Eva Logik</big>'''==<br />
{| class="wikitable"<br />
|-<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eva Logik</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW36</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch 3 times within '''2''' seconds.<hr /><br />
<br />
{| class="wikitable"<br />
|-<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eva Logik</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW37</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the button for 10 seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch 3 times within '''2''' seconds.<br />
<hr /><br />
<br />
#<br />
<br />
{| class="wikitable"<br />
|-<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eva Logik</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW39</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the top button for at least '''3''' seconds while you plug the smart switch into a receptacle<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
=='''<big>Everspring</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>HSM02</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch three times within '''1.5''' second. The LED will be steady on.<br />
#Within '''1''' second, press and hold the tamper switch until LED is off.<br />
#The LED will cycle on for '''2''' seconds and off for '''2''' seconds indicating the sensor has been reset for factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing the tamper switch three times within '''1.5''' second and the sensor will enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing the tamper switch three times within '''1.5''' second will enter exclusion mode. The LED will light up once, each time the tamper switch is pressed.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ST812</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the link key three times within '''1.5''' second. The sensor will beep each time the link key is pressed.<br />
#Within '''1''' second, press and hold the link key. The sensor will long beep for '''5''' seconds. Keep holding the link key until the long beep stops.<br />
#The LED will cycle on for '''2''' seconds and off for '''2''' seconds indicating the sensor has been reset for factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing the link key three times within '''1.5''' second and the sensor will enter inclusion mode. The sensor will beep once, each time the link key is pressed.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing the link key three times within '''1.5''' second will enter exclusion mode. The sensor will beep once, each time the link key is pressed.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Temperature/Humidity Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ST814</big>'''</div><br />
|<div style="text-align: center;">'''<big>Temperature Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Pressing the temperature unit/linking key '''3''' times within '''1.5''' seconds will enter inclusion mode. The linking signal symbol will flash on the display.<br />
#Within '''1''' second, press the temperature unit/linking key again, and the sensor will emit a long beep. Keep holding the temperature unit/linking key until the long beep stops.<br />
#When the radio frequency status shows no signal, the device has been excluded from any previously joined Z-Wave networks and has been reset to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing the temperature unit/linking key '''3''' times within '''1.5''' seconds will enter inclusion mode. The linking signal symbol will flash on the display.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing the temperature unit/linking key '''3''' times within '''1.5''' seconds will enter inclusion mode. The linking signal symbol will flash on the display.<br />
#When the radio frequency status shows no signal, the device has been excluded from any previously joined Z-Wave networks<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Illumination Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ST815</big>'''</div><br />
|<div style="text-align: center;">'''<big>Light Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the '''ESC''' button three times within '''1.5''' second.<br />
#Within '''1''' second, press and hold the '''ESC''' button.<br />
#The sensor will long beep. Keep holding the link key until the long beep stops.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''ESC''' button three times within '''1.5''' second and the sensor will enter inclusion mode. The sensor LED will flash.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''ESC''' button three times within '''1.5''' second and the sensor will enter exclusion mode. The sensor LED will flash.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>HSP02</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press tamper switch three times within '''1.5''' second. The LED will be steady on.<br />
#Within '''1''' second, press and hold the tamper switch until LED is off.<br />
#The LED will cycle on for '''2''' seconds and off for '''2''' seconds indicating the sensor has been reset for factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second and the sensor will enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second will enter exclusion mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Photoelectric Smoke Alarm</big>'''</div><br />
|<div style="text-align: center;">'''<big>SF813</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press tamper switch three times within '''1.5''' second. The LED flashes and the buzzer sounds when the link key is pressed.<br />
#Within '''1''' second, press and hold the tamper switch for '''5''' seconds until the LED is off.<br />
#The LED will light for '''5''' seconds and the buzzer will sound for '''5''' seconds<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second and the sensor will enter inclusion mode. The LED flashes and the buzzer sounds when the link key is pressed.<br />
#The detector will stay awake and remain in inclusion mode for '''10''' minutes, or until the device has successfully joined the Z-Wave network.,<br />
#The LED will light for '''1''' second and the buzzer will sound for '''1''' second to indicated the detector has joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second and the sensor will enter exclusion mode. The LED flashes and the buzzer sounds when the link key is pressed.<br />
#The detector will stay awake and remain in exclusion mode for '''10''' minutes, or until the device has successfully joined the Z-Wave network.,<br />
#The LED will light for '''1''' second and the buzzer will sound for '''1''' second to indicated the detector has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Evolve</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Evolve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Isolated Contact Fixture Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>LFM-20</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Exclude the module by tapping the button '''3''' times, then press and hold for '''10''' seconds.<br />
#*LFM-20 release 5.41 requires that you tap '''2''' times, then press and hold for '''10''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the device once to include it in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Exclude the module by tapping the button '''3''' times, then press and hold for '''10''' seconds.<br />
#*LFM-20 release 5.41 requires that you tap '''2''' times, then press and hold for '''10''' seconds.<br />
<br />
<hr /><br />
<br />
=='''<big>Fibaro</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGBS-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove and re-connect the power supply while holding down the B button<br />
#After 10 seconds, remove and re-connect the power supply again.<br />
#The settings of the device will be reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly press the '''B''' button '''3''' times (the button is located in the center of the device).<br />
#Watch the status in the device details page to confirm proper operation.<br />
#*'''NOTE''': Everytime changes are made to the configuration of TP and TD lines (1-wire), (i.e. When DS18B20 temperature sensors are Included or Excluded), it is necessary to perform an exclusion and repeated inclusion of the sensor modules to the hub. The system will enter into the programming mode only once all the connected sensors have been detected (about '''10''' seconds).<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the '''B''' button '''3''' times (the button is located in the center of the device).<br />
#Wait for the removing process to end.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGPB-101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Click the Button exactly five times.<br />
#Press and hold the Button for at least '''5''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Click the button at least '''6''' times.<br />
#Wait for the device to be added into the system, successful inclusion will be confirmed by Hubitat Elevation™<br />
#Click the button '''4''' times to wake it up<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click the Button at least '''6''' times.<br />
#Wait for the removing process to end.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor 2</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGDW-002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the cover and remove the battery.<br />
#Install the battery while holding both TMP buttons.<br />
#The LED indicator will be flashing slowly for '''5''' seconds, but keep holding the buttons.<br />
#Release one button when the LED indicator starts flashing quickly.<br />
#Click the released button once to confirm initiation of the reset procedure.<br />
#Wait a few seconds for a long flash of the LED indicator. '''Do not remove the battery'''.<br />
#The LED indicator will flash '''5''' times quickly to confirm reset of the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press one of the TMP buttons quickly, '''3''' times in a row, '''while keeping other button is pressed'''.<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press one of the TMP buttons quickly, '''3''' times in a row, '''while keeping other button is pressed'''.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGFS-101 FG3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Make sure the sensor is powered.<br />
#Press and hold the TMP button.<br />
#Wait for the visual LED indicator to glow yellow (4th position of the MENU).<br />
#Release the TMP button.<br />
#Click the TMP button once to confirm selection.<br />
#After few seconds the device will restart with factory settings, which is signaled with the red visual indicator color and an acoustic signal.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Removed the battery for '''10''' seconds, and re-install it<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the TMP button quickly, '''3''' times in a row.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood Sensor ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGFS-101 ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Make sure the sensor is powered.<br />
#Press and hold the TMP button.<br />
#Wait for the visual LED indicator to glow yellow (4th position of the MENU).<br />
#Release the TMP button.<br />
#Click the TMP button once to confirm selection.<br />
#After few seconds the device will restart with factory settings, which is signaled with the red visual indicator color and an acoustic signal.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the TMP button quickly, '''3''' times in a row.<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the TMP button quickly, '''3''' times in a row.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>KeyFob</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGKF-601 ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Click '''O''' and '''<big>–</big>''' simultaneously.<br />
#Click '''∆''' or '''X''' until LED is '''Yellow''' - reset the device.<br />
#Click '''<big>+</big>''' to confirm selection, or is you do not wish to reset at this time, click <big>'''–'''</big> to exit the menu.<br />
#The LED will pulse '''Yellow''' twice to confirm the device has been reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#LED will pulse '''White''' during the adding process.<br />
#Wait for the inclusion process to end.<br />
#Successful adding will be confirmed by the Z-Wave controller’s message.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™ and the remote LED will be '''Green'''.<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click '''O''' and '''<big>–</big>''' simultaneously.<br />
#Click '''∆''' or '''X''' until LED is '''Green.'''<br />
#Click '''<big>+</big>''' to confirm selection.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGMS-001 ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the cover<br />
#Press and hold the B-button.<br />
#Wait for visual indicator to glow '''Yellow''' (2nd menu position).<br />
#Release the '''B''' button and then briefly click the B-button to confirm selection<br />
#After few seconds the device will be reset, which is signaled with the '''Red''', fading visual indicator color.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''B''' button quickly, three times in a row.<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''B''' button quickly, three times in a row.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGRGBW-101</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Disconnect the supply voltage.<br />
#Press and hold the '''B''' button located inside the RGBW Controllers casing.<br />
#Connect the the supply voltage, while still holding the '''B''' button.<br />
#Release the '''B''' button.<br />
#The '''B''' channel will turn on (blue channel).<br />
#Disconnect the power supply.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
('''Auto Inclusion''')<br />
<br />
#Make sure the RGBW Controller is not connected to a supply.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect voltage supply to auto-include the RGBW Controller.<br />
#The RGBW Controller will be automatically recognized and included in the Z-Wave network.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''(Manual Inclusion''')<br />
<br />
#Make sure the RGBW Controller is not connected to a supply.<br />
#To disable auto-inclusion press the '''B''' button briefly, after re-connecting the RGBW Controller to its supply voltage.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Triple click the '''B''' button or any switch connected to I1-I4 inputs.<br />
#The RGBW Controller will be recognized and included in the Z-Wave network.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple click the '''B''' button or any switch connected to I1-I4 inputs.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single Switch 2</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGS-213</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch off the mains voltage (disable the breaker).<br />
#Remove the Switch 2 from the wall switch box.<br />
#Switch on the mains voltage.<br />
#Press and hold the '''B''' button to enter the menu until the visual LED indicator is '''Yellow'''.<br />
#Quickly release and click the '''B''' button again.<br />
#After few seconds the device will be restarted, which is signaled by the '''Red''' LED indicator color.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Identify the S1 switch.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly, three times press the '''S1 switch'''.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Identify the '''S1 switch''' on the Fibaro Single Switch 2 From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly, three times press the '''S1 switch'''.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radiator Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>FIBEFGT-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button at the base of the thermostat head.<br />
#Release when the LED ring is '''Yellow'''.<br />
#Briefly press the button to confirm selection.<br />
#The device will reset and then go into Standby Mode.<br />
#Briefly press the button to activate the thermostat again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly '''3''' times in a row, press the at the base of the thermostat head.<br />
#The LED ring will start flashing '''White'''.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™ and the LED ring will show '''Green'''.<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Quickly '''3''' times in a row, press the at the base of the thermostat head.<br />
#The LED ring will start flashing '''White'''.<br />
#Successful exclusion will be confirmed by Hubitat Elevation™ and the LED ring will show '''Red'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGWPB-111 / FGWPB-121</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Make sure the device is powered.<br />
#Press and hold the button.<br />
#Wait for the LED frame to glow yellow (3rd menu position).<br />
#Release the button and then briefly click the button once to confirm the selection.<br />
#After few seconds the device will restart with factory settings, which is signaled with the red frame color.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the device into a socket.<br />
#The LED frame will glow red signaling it has not being added (If is doesn't you must first perform a general exclusion and then a factory reset).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly, triple click the button located on the casing.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Plug the device into a socket.<br />
#Identify the '''S1 switch''' on the Fibaro Single Switch 2 From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#The LED frame will glow green signaling it is currently included in a Z-Wave network (If it doesn't, then the exclusion process is not needed at this time).<br />
#Quickly, triple click the button located on the casing.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGWPE-102</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button located on the side.<br />
#The device will cycle through GREEN, then VIOLET, and finally YELLOW for device reset.<br />
#Release the button.<br />
#Press the button again to confirm the selection and factory reset the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the device into a socket nearby the main Z-Wave controller.<br />
#The LED frame will glow red signaling not being added (reset or remove the device otherwise).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly, triple click the button on the side of the device.<br />
#The device will be included to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly, triple click the button on the side of the device.<br />
#Plug the device into a socket nearby the main Z-Wave controller.<br />
#The LED frame will glow green signaling being added (removing is not necessary otherwise).<br />
#Quickly, triple click the button on the side of the device.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer 2</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGS-212</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch off the mains voltage (disable the breaker).<br />
#Remove the Dimmer 2 from the wall switch box.<br />
#Switch on the mains voltage.<br />
#Press and hold the '''B''' button to enter the menu until the visual LED indicator is '''Yellow'''.<br />
#Quickly release and click the '''B''' button again.<br />
#After few seconds the device will be restarted, which is signaled by the '''Red''' LED indicator color.<br />
#The device enters the calibration mode.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Identify switch no. 1 (turns the light on) or the B-button (located on the device’s housing).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly press switch no. 1 or the '''B''' button three times.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Identify the '''S1 switch''' on the Fibaro Single Switch 2 From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press switch no. 1 or the '''B''' button three times.<br />
#The device will be excluded from the Z-Wave network.<br />
#Dimmer 2 will start the calibration process<br />
<br />
<hr /><br />
=='''<big>First Alert</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>First Alert</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke & Carbon Monoxide Combo Alarm</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZCOMBO-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke / CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Power up the device with the test button held down for '''10''' or more seconds<br />
#The device will reset all Z-Wave settings and leave the network. '''NOTE: The device will not remain awake after resetting and will go into standby mode.'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Slide battery door open and insert batteries.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button and the alarm will remain awake for 30 seconds on inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide battery door open, then remove and re-insert batteries.<br />
#Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button and the alarm will be excluded from the network.<br />
<br />
<hr /><br />
=='''<big>FortrezZ</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>FortrezZ</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multiple In / Out module</big>''' </div><br />
|<div style="text-align: center;">'''<big>MIMO2+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the program button for '''15''' seconds and then release.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Briefly press the program button once.<br />
#The status LED will flash when inclusion to the Z-Wave network completes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button once.<br />
#The status LED will flash when the device has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>FortrezZ</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multiple In / Out module</big>''' </div><br />
|<div style="text-align: center;">'''<big>MIMOLite</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the program button for '''15''' seconds and then release.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#When the LED has a periodic single flash, the unit will be automatically included to the Z-Wave network.<br />
#If the LED is not flashing, then the button has been previously pressed and automatic inclusion mode is no longer active. In this case, briefly press the program button once.<br />
#The status LED will flash when the device has been excluded from the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button once.<br />
#The status LED will flash when the device has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>GE/Jasco</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Link Bulb</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn OFF the light for '''3''' second.<br />
#Turn ON the light for '''3''' seconds<br />
#Repeat this process '''5''' times<br />
#The bulb will dim and then flash once when successfully reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the bulb on.<br />
#The bulb will flash when connected to the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>12718</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12719/ZW4101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outdoor Plug-in Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12720/ZW4201</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>In-Wall Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>12721</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12722</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>In-Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>12724</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Toggle Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12727</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press up and release the toggle switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Toggle Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>12729</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press up and release the toggle switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Fan Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>12730/ZW4002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-In Outdoor Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>14284</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug the switch from the outlet<br />
#Press and hold the manual/program button on the switch for at least three seconds while you plug the switch into an outlet<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Fan Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>14287</big>'''</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart fan control rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Tamper Resistant Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>14288</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the manual/program button '''3''' times, then press and hold the button for at least '''3''' seconds. The LED will flash '''5''' times to confirm.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>14291</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>14294</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Motion Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>26931</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and release the top button '''10''' times within '''5''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom button on the smart switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom button on the smart switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Motion Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>26933</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and release the top button '''10''' times within '''5''' seconds. The LED will flash '''3''' times quickly confirming change<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom button on the smart switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top button on the smart switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>28167</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#If plugged in, unplug the Dimmer from the receptacle.<br />
#Press and hold the top button for at least '''3''' seconds while you plug the dimmer into a receptacle.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>28169</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#If plugged in, unplug the Dimmer from the receptacle.<br />
#Press and hold the top button for at least '''3''' seconds while you plug the dimmer into a receptacle.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Hinge Pin Smart Door Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>32563/ZW6301</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and release the program button '''10''' times quickly.<br />
#The LED light will flash approximately eight times.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-In Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>45853</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug the switch.<br />
#Hold the button and plug in the switch.<br />
#Keep the button held down for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the dimmer at the circuit breaker.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Unplug the switch.<br />
#Hold the button and plug in the switch.<br />
#Keep the button held down for '''10''' seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Unplug the switch.<br />
#Hold the button and plug in the switch.<br />
#Keep the button held down for '''10''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>45856</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the top of the rocker (ON Switch) with '''10''' quick short presses.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the dimmer at the circuit breaker.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Restore power to the Smart Dimmer at the circuit breaker<br />
#Pairing Begins Automatically: LED Status Indicator flashs as the Smart Dimmer automatically scans for a compatible network controller to pair with.<br />
#After the Smart Dimmer is located and paired to the ZigBee network, the LED Status Indicator will stop flashing and the Smart Dimmer.<br />
#*'''Note:''' ''LED Status Indicator stops flashing if a timeout occurs: Auto-Scan mode will eventually time out if the device has not joined a ZigBee network. Press and release the front panel to restart pairing process following timeout.''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>45857</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Lift the air-gap switch at the bottom of the rocker to OFF position to power down the device.<br />
#Hold down the UP button<br />
#Push In the air-gap switch to ON position to power up the device.<br />
#Release the UP button within '''4''' seconds of power up.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the dimmer at the circuit breaker.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Restore power to the Smart Dimmer at the circuit breaker<br />
#Pairing Begins Automatically: LED Status Indicator flashes as the Smart Dimmer automatically scans for a compatible network controller to pair with.<br />
#After the Smart Dimmer is located and paired to the ZigBee network, the LED Status Indicator will stop flashing and the Smart Dimmer.<br />
#*'''Note:''' ''LED Status Indicator stops flashing if a timeout occurs: Auto-Scan mode will eventually time out if the device has not joined a ZigBee network. Press and release the front panel to restart pairing process following timeout.''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>46201</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>Enbrighten Smart Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>46203</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
<br />
=='''<big>GLEDOPTO</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GLEDOPTO</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mini RGB+CCT Controller</big>''' </div><br />
|<div style="text-align: center;">'''<big>GL-MC-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Power '''ON''' the device and within 2 seconds, remove power.<br />
#Repeat the '''OFF''' and '''ON''' '''4 times''' in a row.<br />
#The device will reset to factory default on the 5th time the power is applied.<br />
#Reset is confirmed by the lights flashing '''4 times'''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the GLEDOPTO Mini RGB+CCT controller.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power '''ON''' the device and within 2 seconds, remove power.<br />
#Repeat the '''OFF''' and '''ON''' '''4 times''' in a row.<br />
#The device will reset to factory default on the 5th time the power is applied.<br />
#Reset is confirmed by the lights flashing '''4 times'''.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Power '''ON''' the device and within 2 seconds, remove power.<br />
#Repeat the '''OFF''' and '''ON''' '''4 times''' in a row.<br />
#The device will reset to factory default on the 5th time the power is applied.<br />
#Reset is confirmed by the lights flashing '''4 times'''.<br />
<br />
<hr /><br />
=='''<big>GoControl</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GoControl</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Controllers</big>'''</div><br />
|<div style="text-align: center;">'''<big>GD00Z</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}''Includes Linear GD00Z-2, GoControl GD00Z-4, Linear GD00Z-5, ADT GD00Z-6, GoControl GD00Z-7 and NuTone ND00Z'' <br />
<br />
'''Factory Reset'''<br />
<br />
#Reset the controller by pressing the Link button '''5''' times.<br />
#A quick beep followed by a longer beep will indicate proper reset for the GD00Z series or ND00Z.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the Link button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Link button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GoControl</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>WADWAZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program switch of WADWAZ-1 for '''1''' second and release. The LED light will flash continuously when the sensor has been successfully excluded.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Unscrew the screw fastening the rear cover and slide the rear cover down<br />
#Insert a CR123A battery into the battery compartment and LED will start to flash slowly, which means the sensor has not yet performed inclusion with the controller.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Once Hubitat Elevation™ discovers the device, the LED will stop flashing. If the LED does not stop flashing and is not discovered by your hub, relocate the WADWAZ-1 to within 100 feet (line of sight) of a Z-Wave repeater or your hub and restart Z-Wave Inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program switch of WADWAZ-1 for '''1''' second and release. The LED light will flash continuously when the sensor has been successfully excluded.<br />
<br />
<hr /><br />
=='''<big>Graber</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Graber</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motorized Shades</big>'''</div><br />
|<br />
|<div style="text-align: center;">'''<big>Shade</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Network Reset'''<br />
<br />
#Press and hold the button on the headrail end cap for '''7''' seconds or until the shade jogs once.<br />
#Release the button.<br />
#*NOTE: The will not reset the shade limits<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Place the single channel remote in programming mode by pressing and holding the programming button until the LED light bar begins to flash '''Green.'''<br />
#Release the button.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Place the single channel remote in programming mode by pressing and holding the programming button until the LED light bar begins to flash '''Green.'''<br />
#Release the button<br />
#The shade will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Halo Labs</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Halo</big>'''</div><br />
|<div style="text-align: center;">'''<big>Halo+</big>'''</div><br />
|<div style="text-align: center;">'''<big>LS001A</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke/CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#To reset, hold down center button for approximately '''20''' or more seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Once Halo greets you, it will automatically begin searching for a ZigBee network. Halo will glow for a couple minutes before timing out.<br />
#*To awaken the detector, double-tap the center button or hold the button for approximately '''3''' or more seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Hold down the center button for approximately '''20''' ot more seconds. Halo will reset all ZigBee settings and leave the network. .<br />
<br />
<hr /><br />
=='''<big>Hampton Bay</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hampton Bay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wink Enabled Ceiling Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>MR101Z</big>'''</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Turn off your fan for '''3''' seconds, then turn it on for '''3''' seconds (Repeat '''5''' times)<br />
#The light will flash three times when the factory reset is successful.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn on your fan.<br />
#When successful, the fan will turn on at low speed and the light will flash three times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Perform a factory reset on the fan controller<br />
<br />
<hr /><br />
=='''<big>Hank</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hank</big>'''</div><br />
|<div style="text-align: center;">'''<big>One-Key Scene Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>HKZW-SCN01</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and holding the center "Z-button" for 20 seconds.<br />
#Release the button after '''20''' seconds and the LED will stay yellow for '''3''' seconds.<br />
#Within the '''3''' second period where the LED is yellow, short-press the Z-button to reset the controller to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the battery.<br />
#Triple click the center "Z-button".<br />
#If inclusion is successful, the LED will flash '''blue''' for less than '''5''' seconds, and then it will remain solid for '''15''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If exclusion is successful, the LED will flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hank</big>'''</div><br />
|<div style="text-align: center;">'''<big>Four-Key Scene Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>HKZW-SCN04</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and holding the center "Z-button" for '''20''' seconds.<br />
#Release the button after '''20''' seconds and the LED will stay yellow for '''3''' seconds.<br />
#Within the '''3''' second period where the LED is yellow, short-press the Z-button to reset the controller to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the battery.<br />
#Triple click the center "Z-button".<br />
#If inclusion is successful, the LED will flash '''blue''' for less than '''5''' seconds, and then it will remain solid for '''15''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If exclusion is successful, the LED will flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hank</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW LED Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>HKZW-RGB01</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle power to the bulb off and on '''3''' times quickly.<br />
#Within '''3''' times toggling the bulb, the final ending state of the switch or plug must be on.<br />
#If the exclusion is successful, the RGB BULB will quicly flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
#The bulb will remain '''warm white''' after the exclusion procedure is complete.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure power to the bulb is disconnected and the RGB BULB is close to the hub.<br />
#Insert the bulb into a socket and then turn it on.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle power to the bulb off and on '''3''' times quickly.<br />
#Within '''3''' times toggling the bulb, the final ending state of the switch or plug must be on.<br />
#If the exclusion is successful, the RGB BULB will quickly flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
#The bulb will remain '''warm white''' after the exclusion procedure is complete.<br />
<br />
<hr /><br />
=='''<big>Heatit</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Dim</big>'''</div><br />
|<div style="text-align: center;">'''<big>14 444 44</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#By pressing and holding the main button for '''20''' seconds, the dimmer will be factory reset.<br />
#The connected light source will blink once and go in the OFF state if successfully reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the main button on the dimmer '''6''' times quickly.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the main button on the dimmer '''6''' times quickly. and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Temp2</big>'''</div><br />
|<div style="text-align: center;">'''<big>45 126 66</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the link button for '''20''' seconds<br />
#rES will be displayed.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the link button '''3''' times quickly.<br />
#The thermostat will display '''INC''' when the thermostat is successfully included.<br />
#*If inclusion fails, '''Err''' (error) will appear.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the link button '''3''' times quickly and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>45 126 86</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#When the device is excluded from the Z-Wave network, it will revert to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Plug-in the device and within '''1.5''' seconds, press the function button '''3''' times.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Unplug the device.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug-in the device and within '''1.5''' seconds, press the function button '''3''' times.<br />
#Wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Smoke 230V</big>'''</div><br />
|<div style="text-align: center;">'''<big>45 126 89</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Excluding the device from the Z-Wave network will reset it to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#When power is applied, the smoke detector initiates a '''1''' minute warm-up period and will automatically enter inclusion mode.<br />
#*'''NOTE''': After the calibration process is finished, access inclusion mode by pressing the function button '''3''' times within '''1.5''' seconds.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the function button '''3''' times within '''1.5''' seconds and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-TRM3</big>'''</div><br />
|<div style="text-align: center;">'''<big>54 305 98</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press both the Right and Center (down and confirm) buttons for '''20''' seconds.<br />
#The thermostat will be factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the center button until '''OFF''' is shown on the display (approx. 10 seconds).<br />
#Press the down button '''5''' times until you reach '''CON'''<br />
#Press and hold until the display shows a rotating light pattern. The thermostat will display '''INC''' when the thermostat has successfully joined the Z-Wave network.<br />
#*If inclusion fails, '''Err''' (error) will appear.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the down button '''5''' times until you reach '''CON'''<br />
#Press the center (confirm) for approximately '''2''' seconds and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
=='''<big>Heiman</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heiman</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee Gas Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS1CG</big>'''</div><br />
|<div style="text-align: center;">'''<big>Gas Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Plug in the gas detector. It will beep once and the indicator light will flash '''Green''' once.<br />
#Before the detector Zigbee radio can be reset, the gas detector must be in a ready state. The indicator light will alternate '''Red''' and '''Yellow''' while it is warming up.<br />
#After approximately '''3''' minutes, the detector indicator light will stop flashing Red and Yellow. It will now have a '''steady Green''' indicator light, denoting it is ready and has ented its working state.<br />
#Using the included tool or a straightened paperclip inserted in the small hole on the side, press the reset button for '''2''' seconds.<br />
#The '''Green''' indicator light will flash quickly, and after '''3''' seconds it will turn off briefly and then return to '''steady Green''' indicating thedetector has returned to its ready state.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Plug in the gas detector. It will beep once and the indicator light will flash '''Green''' once.<br />
#Before the detector Zigbee radio can be reset, the gas detector must be in a ready state. The indicator light will alternate '''Red''' and '''Yellow''' while it is warming up.<br />
#After approximately '''3''' minutes, the detector indicator light will stop flashing Red and Yellow. It will now have a '''steady Green''' indicator light, denoting it is ready and has ented its working state.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using the included tool or a straightened paperclip inserted in the small hole on the side, press the reset button for '''2''' seconds.<br />
#The '''Green''' indicator light will flash quickly, and after '''3''' seconds it will turn off briefly and then return to '''steady Green''' indicating thedetector has returned to its ready state.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Ensure the gas detector is plugged ing and ready.<br />
#Before the detector Zigbee radio can be reset, the gas detector must be in a ready state. The indicator light will alternate '''Red''' and '''Yellow''' while it is warming up.<br />
#After approximately '''3''' minutes, the detector indicator light will stop flashing Red and Yellow. It will now have a '''steady Green''' indicator light, denoting it is ready and has ented its working state.From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using the included tool or a straightened paperclip inserted in the small hole on the side, press the reset button for '''2''' seconds.<br />
#The '''Green''' indicator light will flash quickly, and after '''3''' seconds it will turn off briefly and then return to '''steady Green''' indicating thedetector has returned to its ready state.<br />
<br />
<hr /><br />
<br />
=='''<big>HomePro</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>HomePro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Exterior Appliance Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZRP110</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the button on the front of the module once.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the button on the front of the module once.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the button on the front of the module once.<br />
<br />
<hr /><br />
=='''<big>Homeseer</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Indicator Light Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-FS100-L+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Light Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the Z-Wave button inside the sensor body for '''10''' seconds<br />
#If successful, the LED will flash '''5''' times.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the inclusion process to finish. This may take some time.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the exclusion process to finish. This may take some time.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Perimeter Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-FS100-W+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the Z-Wave button inside the sensor body for '''10''' seconds<br />
#If successful, the LED will flash '''5''' times.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the inclusion process to finish. This may take some time.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the exclusion process to finish. This may take some time.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-WD200+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Turn dimmer on by tapping the top of the paddle once.<br />
#Quickly tap top of the paddle '''3''' times.<br />
#If light turns off and then on again, the dimmer is reset. If not, repeat manual reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the inclusion process. This will take a few moments to complete.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the exclusion process. This will take a few moments to complete.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-WS200+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Turn dimmer on by tapping the top of the paddle once.<br />
#Quickly tap top of the paddle '''3''' times.<br />
#If light turns off and then on again, the dimmer is reset. If not, repeat manual reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the inclusion process. This will take a few moments to complete.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the exclusion process. This will take a few moments to complete.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-DS100+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave button inside the sensor body for '''20''' seconds, the LED will stay on until the button is released.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Triple-click the Z-Wave button inside the sensor body and wait for the process to finish.<br />
#If successful, the sensor body LED will flash briefly and then stay on for '''3''' seconds.<br />
#If unsuccessful, the LED with flash briefly and then turn off. Should this happen, repeat the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple-click the Z-Wave button inside the sensor body.<br />
#If successful, the LED will turn off within '''1''' second.<br />
#If unsuccessful, the LED with flash for '''5''' seconds. Should this happen, repeat the exclusion process.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-LS100+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave button for '''20''' seconds. Release the button once the LED stops flashing and glows solidly<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Click the Z-Wave button inside the sensor body once and wait for the process to finish.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple-click the Z-Wave button inside the sensor body. Wait for the inclusion process to finish.<br />
<br />
<hr /><br />
=='''<big>Honeywell</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Honeywell</big>'''</div><br />
|<div style="text-align: center;"><big>'''T-6 Pro Z-Wave Thermostat'''</big></div><br />
|<div style="text-align: center;">'''<big>TH6320ZW2003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the '''Menu''' button for '''5''' seconds to access the '''Advanced Menu'''.<br />
#Touch the left '''<''' or right '''>''' arrow keys .to go through the options in the advanced menu.<br />
#Choose '''Reset'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#To include the thermostat from Z-Wave network, go to the thermostat '''Menu''', then '''Z-Wave Setup'''. and touch '''Select'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the inclusion procedure is successful, '''INCLUDED''', the node ID, and the Z-Wave connected status icon appear on the screen. If the procedure fails, then '''FAILED TO INCLUDE''' will appear on the screen. <br />
#*'''NOTE:''' • Before adding the thermostat to a Z-Wave network, check that it does not already belong to one. If the thermostat is included in Z-Wave network, it offers to '''Exclude'''. If the thermostat is excluded from Z-Wave network, it offers to include. You can also check the status by viewing the Node ID located in the thermostat MENU/ DEVICE INFO. An excluded thermostat should show zero for the Node ID ('''000''').<br />
#*Whether you are including or excluding thermostat from your Z-Wave network, first you have to initiate it on your Z-Wave controller. Please refer to the user manual of your Z-Wave controller. • For other specific tasks, such as adding the thermostat to home automation scenes or groups, refer to the Z-Wave controller instructions.<br />
#*The T6 Pro Z-Wave thermostat works in the optional Z-Wave battery mode or normal power mode based on its power source. The Z-Wave power mode can only be changed when thermostat is NOT included in Z-Wave network. You can check the power mode in the thermostat menu under MENU/DEVICE INFO. • If 24 VAC power source is not used or available, the thermostat must be powered by batteries. The thermostat will operate in LSS mode (power-save, sleep mode) to help conserve battery life after it has been included in a Z-Wave network. The Z-Wave radio supports beaming. It allows other devices in the network to wake up the Z-Wave thermostat, accept commands, and then go back to sleep.<br />
#*If you need the thermostat to operate AOS mode (always listening mode) to act as signal repeater and to increase network reliability, you need to ask your professional installer to power the thermostat by 24 VAC.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#To exclude the thermostat from Z-Wave network, go to the thermostat '''Menu''', then '''Z-Wave Setup'''. and touch '''Select'''.<br />
<br />
<hr /><br />
=='''<big>IKEA</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA SYMFONISK</big>'''</div><br />
|<div style="text-align: center;">'''<big>Sound Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>20370482</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover from the bottom of the remote and hold the button for 10 seconds to factory reset.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the remote.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover from the bottom of the remote and hold the button for 10 seconds.<br />
#Save the device and '''without deleting it from the hub''', repeat steps '''1''' and '''2''' above.<br />
#The hub will report that it found the previously paired device.<br />
#*NOTE: If you do not pair a second time with the device already in the Hubitat Elevation™ database, the remote may not work proplerly.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the battery cover from the bottom of the remote and hold the button for 10 seconds to factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA TRÅDFRI</big>'''</div><br />
|<div style="text-align: center;">'''<big>Warm White Bulb</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Cycle power '''6''' times. The bulb will begin to dim and finally flash one time to indicate that it has been successfully reset.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the bulb.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Cycle power '''6''' times. The bulb will begin to dim and finally flash '''1''' time to indicate that it has successfully joined the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Cycle power '''6''' times. The bulb will begin to dim and finally flash one time to indicate that it has been successfully reset.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the bulb again.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA TRÅDFRI</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Using a straightened paperclip, insert it into the small hole on the left side of the outlet next to the LED.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the outlet).<br />
#The LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using a straightened paperclip, insert it into the small hole on the left side of the outlet next to the LED.<br />
#Press and hold the paperclip in the hole for '''2-4''' seconds (you will feel the paperclip depressing a tiny button inside the outlet).<br />
#The LED will pulse slowly when pairing and will be steady when pairing has been successfully completed.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Using a straightened paperclip, insert it into the small hole on the left side of the outlet next to the LED.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the outlet).<br />
#The LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA TRÅDFRI</big>'''</div><br />
|<div style="text-align: center;">'''<big>Signal Repeater</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Using a straightened paperclip, insert it into the small hole at the end of the repeater next to the USB port.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the repeater).<br />
#An LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using a straightened paperclip, insert it into the small hole at the end of the repeater next to the USB port.<br />
#Press and hold the paperclip in the hole for '''2-4''' seconds (you will feel the paperclip depressing a tiny button inside the repeater).<br />
#The LED will pulse slowly when pairing and will be steady when pairing has been successfully completed.<br />
#The signal repeater will pair as '''Device'''. No driver will be assigned and it is not necessary to have one since this device only repeats Zigbee radio signals.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Using a straightened paperclip, insert it into the small hole at the end of the repeater next to the USB port.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the repeater).<br />
#The LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device again.<br />
<br />
<hr /><br />
=='''<big>Innr</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Innr</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Spot Colour GU10</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>RS 230 C</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Cycle power '''6''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Cycle power '''6''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Cycle power '''6''' times.<br />
<br />
<hr /><br />
=='''<big>Inovelli</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi-White and Multi-Color Bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Power the bulb ON and OFF '''6''' times within '''2''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power the bulb ON and OFF '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Power the bulb ON and OFF '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Hold the UP button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the top button for at least '''3''' seconds while you plug the outlet into a recepticle<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Once the controller is ready to include your device, press in and release the button on the switch '''3-5''' times within '''3''' seconds to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Once the controller is ready to exclude your device, press in and release the button on the switch '''3-5''' times within '''3''' seconds to include it in the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch Module</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is accomplished by performing a general exclusion on the device.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the center button '''5''' times within '''1''' second to exclude it in the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the center button '''5''' times within '''1''' second to include it in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the center button '''5''' times within '''1''' second to exclude it in the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch/Smart Scene Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>NZW30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Hold the UP button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Dimmer/Smart Scene Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>NZW31</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Hold the UP button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Scene Switch S2</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>LZW30-SN</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Hold down the configure button for '''20''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the configure button '''3''' times. The LED bar will flash '''Blue'''.<br />
#If the switch was included successfully, the bard will turn '''Green'''. If the inclusion process was not successful, the LED bar will turn '''Red'''.<br />
#You can scheck the Z-Wave range by holding the configure button for 5-10 seconds. A '''Red''' bar indicates the switch is not in range of the controller or a signal repeater. '''Green''' indicates a good signal.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the configure button '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>On/Off Switch S2</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>LZW30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Hold down the configure button for '''20''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the configure button '''3''' times. The LED bar will flash '''Blue'''.<br />
#If the switch was included successfully, the bard will turn '''Green'''. If the inclusion process was not successful, the LED bar will turn '''Red'''.<br />
#You can scheck the Z-Wave range by holding the configure button for 5-10 seconds. A '''Red''' bar indicates the switch is not in range of the controller or a signal repeater. '''Green''' indicates a good signal.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the configure button '''3''' times.<br />
<br />
<hr /><br />
=='''<big>IRIS</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Button</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>BTN900</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Squeeze the two sides of the smart button together by the ridges and gently pull them apart to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery press the reset button next to the battery '''8''' times in a row, once per second.<br />
#Upon a successful reset, the smart button will flash green indicating the device is now ready to pair.<br />
#*'''NOTE:''' ''The green light can be dim, if you're in a well lighted area this light could be difficult to see.''<br />
#If your button does not flash green check your battery, then retry from step 2.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#With the smart button, squeeze the two sides together by the ridges and gently pull them apart to reveal the battery compartment.<br />
#Remove and re-insert the battery. When the smart button begins looking for your hub, the light around the button will flash green.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Squeeze the two sides of the smart button together by the ridges and gently pull them apart to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within 10 seconds of reinserting the battery press the reset button next to the battery '''8''' times in a row, once per second.<br />
#Upon a successful reset, the smart button will flash green indicating the device is now ready to pair.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see.''<br />
#If your button does not flash green check your battery, then retry from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Care Pendant</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PDT900</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the pendant should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the supplied access tool into the small opening at the top of the pendant. Gently pry open the case to reveal the battery compartment.<br />
#Insert the battery in the correct orientation. The pendant will light up and start flashing as it begins searching for your hub<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the pendant should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Door/Window Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>DWS800</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Squeeze the sides and pop open the sensor to reveal the battery, remove the battery and wait '''10''' seconds.<br />
#Reinsert the battery and immediately press the white reset button '''8''' times.<br />
#Your Iris Contact Sensor should now be flashing green indicating it's ready to pair<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the large piece, remove the back by squeezing the semi-circles on either side.<br />
#The sensor's LED will flash while searching for the hub.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Squeeze the sides and pop open the sensor to reveal the battery, remove the battery and wait '''10''' seconds.<br />
#Reinsert the battery and immediately press the white reset button '''8''' times.<br />
#Your Iris Contact Sensor should now be flashing green indicating it's ready to pair<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Keyfob</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>KEY903</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Presence Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the key fob should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Insert the battery in the correct orientation. The fob will light up and start flashing as it begins searching for your hub.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the key fob should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>MOT800</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Squeeze the raised edges on the sides of the motion sensor to take it apart to expose the battery.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#As soon as the battery is reinserted, press the reset button '''8''' times in a row, once per second. The lights on the top right corner of the motion sensor should begin to flash. (You may have to make a shadow over the device to see the flashing light). Once the light is flashing you're ready to pair. <br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the large piece, remove the back by squeezing the raised edges on both sides.<br />
#Insert the battery. The sensor's LED will flash while searching for the hub.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Squeeze the raised edges on the sides of the motion sensor to take it apart to expose the battery.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#As soon as the battery is reinserted, press the reset button '''8''' times in a row, once per second. The lights on the top right corner of the motion sensor should begin to flash. (You may have to make a shadow over the device to see the flashing light). Once the light is flashing you're ready to pair. <br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Smart Plug</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>SPG800</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the Smart Plug from the receptacle.<br />
#Press and hold the button on the front for '''15''' seconds.<br />
#Insert the Smart Plug back into the receptacle.<br />
#Immediately press the button on the front of the Smart Plug '''8''' times, allowing 1 second between each press.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the Smart Plug into any wall outlet.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the Smart Plug from the receptacle.<br />
#Press and hold the button on the front for '''15''' seconds.<br />
#Insert the Smart Plug back into the receptacle.<br />
#Immediately press the button on the front of the Smart Plug '''8''' times, allowing 1 second between each press.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Button</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3460-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Within '''10''' seconds after re-inserting battery, press the button '''8''' times. The light will very dimly flash solid blue, than flash blue (even more faintly).<br />
#*'''NOTES:''' ''The + side of the battery should be facing the bottom of the button when you insert the tray. At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.''<br />
#*''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.<br />
#*'''NOTES:''' ''The + side of the battery should be facing the bottom of the button when you insert the tray. At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.''<br />
#*''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Within '''10''' seconds after re-inserting battery, press the button '''8''' times. The light will very dimly flash solid blue, than flash blue (even more faintly).<br />
#*'''NOTES:''' ''The + side of the battery should be facing the bottom of the button when you insert the tray. At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.''<br />
#*''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Door/Window Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3320-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Slide the battery cover off, remove the battery and wait '''10''' seconds.<br />
#Using a paper clip, press and hold the reset button completely down while reinserting the battery.<br />
#Hold the reset button for an additional '''2''' seconds and release. The contact sensor should begin flashing blue.<br />
#*'''NOTE:''' ''The reset button is a small black button above the battery.''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#After pairing test your Iris Contact Sensor is working by opening and closing the door or window it's set up on (The LED should flash GREEN when opened/closed)<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Slide the battery cover off, remove the battery and wait '''10''' seconds.<br />
#Using a paper clip, press and hold the reset button completely down while reinserting the battery.<br />
#Hold the reset button for an additional '''2''' seconds and release. The contact sensor should begin flashing blue.<br />
#*'''NOTE:''' ''The reset button is a small black button above the battery''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>GD00Z-1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Unplug your device and wait '''10''' seconds<br />
#Restore power to the device<br />
#Press the Link (Z-Wave) button on the left side of the device '''5''' times within '''10''' seconds to reset your device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Perform a factory reset before attempting to join the Z-Wave network.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Ensure your Iris Garage Door Controller is plugged in, and the tilt sensor battery is active/working.<br />
#Press the Link (Z-Wave) button once located on the left of the Iris Garage Door Controller.<br />
#When your device triple beeps, it has successfully joined the Z-Wave network.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Once the controller is ready to exclude your device, press the Link (Z-Wave) button once located on the left side of the device.<br />
#The garage door controller should give a short beep immediately followed by a long beep.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Keypad</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3405-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery and wait '''10''' seconds.<br />
#Press and hold the tamper switch while inserting one battery. Hold tamper switch for '''2''' seconds after the battery is installed. The tamper switch is the little flat plastic tab located on the back where the mounting bracket connects to the device, it is above the battery compartment.<br />
#*Note: The factory reset process puts the security keypad back into pairing mode.<br />
#Upon a proper reset the top right icon will be flashing green on your keypad.<br />
#You may now insert the 2nd battery.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press and hold the tamper switch while inserting one battery. Hold tamper switch for '''2''' seconds after the battery is installed. The tamper switch is the little flat plastic tab located on the back where the mounting bracket connects to the device, it is above the battery compartment.<br />
#*Note: The factory reset process puts the security keypad back into pairing mode.<br />
#Upon a proper reset the top right icon will be flashing green on your keypad.<br />
#You may now insert the 2nd battery.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V3 Keypad</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>iL02_1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove only 1 AA battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side of the keypad and release when the status light flashes Red once.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove only 1 AA battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side of the keypad and release when the status light flashes Red once.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove only 1 AA battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side of the keypad and release when the status light flashes Red once.<br />
#A flashing Blue light indicates the device is reset and ready to pair again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Motion Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3326-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery and wait '''10''' seconds<br />
#Press and hold the reset button on the left side of the device as you reinsert the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#*'''Note:''' ''The reset button is a small white button located on the side of the motion sensor.''<br />
#Upon a successful reset your device will now be flashing Blue, indicating it's ready to pair.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for '''10''' seconds and re-insert.<br />
#Replace the battery cover. The sensor's Blue LED will flash while searching for the hub.<br />
#Once paired the LED will stop flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press and hold the reset button on the left side of the device as you reinsert the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#*'''Note:''' ''The reset button is a small white button located on the side of the motion sensor.''<br />
#Upon a successful reset your device will now be flashing Blue, indicating it's ready to pair.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V3 Motion Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>iL07_1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side and release when the status light turns Red.<br />
#A flashing Blue light indicates the device is ready to pair.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side and release when the status light turns Red.<br />
#A flashing Blue light indicates the device is ready to pair.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side and release when the status light turns Red.<br />
#A flashing Blue light indicates the device is ready to pair.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Smart Plug</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3210-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the Smart Plug from the outlet and wait '''10''' seconds.<br />
#Press and hold the small white button on the front of the plug.<br />
#While holding the button, insert the Smart Plug back into the outlet.<br />
#As soon as the LED on the front of the plug lights up, release the button.<br />
#If the reset was successful the Blue LED on the front of the smart plug will be flashing. This means your smart plug is now ready to pair.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert your smart plug into any wall outlet. Your smart plug should be flashing Blue, that means it's in pairing mode.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press and hold the small white button on the front of the plug.<br />
#While holding the button, insert the Smart Plug back into the outlet.<br />
#As soon as the LED on the front of the plug lights up, release the button.<br />
#If the reset was successful the Blue LED on the front of the smart plug will be flashing. This means your smart plug is now ready to pair.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Smart Fob</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3450-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Twist open the battery cover on the back of the Smart Fob.<br />
#Remove the battery and wait '''10''' seconds<br />
#Reinstall the battery with the positive side facing you.<br />
#Once the battery is installed, push any of the four buttons '''8''' times in a row, once per second.<br />
#Confirm that the fob has been reset by checking that the fob's background light is flashing Blue. If it does not do this, check the battery and retry from step 2.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the battery so the plus sign is facing you. Put the cover on and twist tighten with a coin.<br />
#The Smart Fob's LED will flash Blue while searching for the hub.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Twist open the battery cover on the back of the Smart Fob.<br />
#Remove the battery and wait '''10''' seconds<br />
#Reinstall the battery with the positive side facing you.<br />
#Once the battery is installed, push any of the four buttons '''8''' times in a row, once per second.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Water Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3315-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the cover from the sensor, then remove the battery for at least '''10''' seconds.<br />
#Press and hold the reset button while reinserting the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#A successful reset will be indicated by a flashing Blue light on your sensor<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the cover from the sensor, then remove the battery for at least '''10''' seconds.<br />
#Press and hold the reset button while reinserting the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#A successful reset will be indicated by a flashing Blue light on your sensor<br />
<br />
<hr /><br />
<br />
=='''<big>KEEN Home</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>KEEN Home</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Vent</big>''' </div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Vent</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press the black button on the back inside of the Smart Vent battery compartment '''5''' times.<br />
#You will know that the Smart Vent has been properly reset when the LED starts double flashing Green<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Removed the battery cartridge and reinsert it to bring the vent online.<br />
#Press the black button on the back inside of the Smart Vent battery compartment '''5''' times.<br />
#This should force the vent into join-mode once again.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press the black button on the back inside of the Smart Vent battery compartment '''5''' times.<br />
#You will know that the Smart Vent has been properly reset when the LED starts double flashing Green<br />
<br />
<hr /><br />
=='''<big>Kwikset</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Kwikset</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartCode</big>'''</div><br />
|<div style="text-align: center;">'''<big>910 / 912 / 914</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove battery pack<br />
#Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for '''30''' seconds until the lock beeps and the status LED flashes Red.<br />
#Press the Program button once more. When the LED flashes Green and you hear one beep, the lock has been reset.<br />
#Perform the '''door handing''' process again.<br />
#*Press and hold the Lock button while installing battery pack.<br />
#*Hold button until the latch bolt starts moving on its own. If the latch bolt retract and extend on its own when the battery pack was installed, then the handing process was successful.<br />
#*If the latch bolt does not retract and extend on its own, remove the battery pack and wait '''15''' seconds, before attempting the handing process again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Hold the interior assembly a maximum of 12" (305 mm) from your Z-Wave controller<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock one time to include it. The controller and lock must remain stationary for a total of '''60''' seconds during the Inclusion process.<br />
#If Inclusion is unsuccessful, go to the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock one time. Once the lock is fully Excluded from the system, repeat the Inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock one time. Once the lock is fully Excluded from the system. The controller and lock must remain stationary for a total of '''60''' seconds during the Inclusion process.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Kwikset</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartCode</big>'''</div><br />
|<div style="text-align: center;">'''<big>910 / 912 / 914</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove battery pack<br />
#Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for '''30''' seconds until the lock beeps and the status LED flashes Red.<br />
#Press the Program button once more. When the LED flashes Green and you hear one beep, the lock has been reset.<br />
#Perform the '''door handing''' process again.<br />
#*Press and hold the Lock button while installing battery pack.<br />
#*Hold button until the latch bolt starts moving on its own. If the latch bolt retract and extend on its own when the battery pack was installed, then the handing process was successful.<br />
#*If the latch bolt does not retract and extend on its own, remove the battery pack and wait '''15''' seconds, before attempting the handing process again.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Hold the interior assembly a maximum of 12" (305 mm) from your hub.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock '''4''' times to pair it. The controller and lock must remain stationary for a total of '''60''' seconds during the pairing process.<br />
#*If pairing is unsuccessful, press button '''B''' on the lock '''9''' times and repeat the pairing process.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press button '''B''' on the lock '''9''' times'''.'''<br />
<br />
<hr /><br />
<br />
=='''<big>Leak Intelligence</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leak Intelligence</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Gopher</big>''' </div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Unplug your device and wait '''10''' seconds<br />
#Restore power to the device<br />
#Press the Link (Z-Wave) button on the left side of the device '''5''' times within '''10''' seconds to reset your device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave button once.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Once the controller is ready to exclude your device, press the Z-Wave button once.<br />
<br />
<hr /><br />
=='''<big>Leviton</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>DZPA1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the control button for a total of 7 seconds and the locator LED flashes '''Amber'''.<br />
#Following the first 7 seconds, the locator LED will flash quickly, alternating between red and amber after 14 seconds.<br />
#Release the top paddle to complete the reset process.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashes '''Amber'''.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the control button one time and the locator LED will quickly flash green.<br />
#Upon successful inclusion to the Z-Wave network, the LED will turn off and then flash '''Green''' 3 times.<br />
#If inclusion fails, the LED will flash '''Red''' 3 times.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashes '''Amber'''.<br />
#Tap the locator button one time and the locator LED will quickly flash green.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>DZ6HD</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the top paddle button for a total of 14 seconds.<br />
#Following the first 7 seconds, the LED will turn amber.<br />
#The locator LED will flash quickly, alternating between red and amber after 14 seconds.<br />
#Release the top paddle to complete the reset process.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashs '''Amber'''.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the locator button one time and the locator LED will quickly flash green.<br />
#Upon sucessful inclusion to the Z-Wave network, the LED will turn off and then flash '''Green''' 3 times.<br />
#If inclusion fails, the LED will flash '''Red''' 3 times.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashs '''Amber'''.<br />
#Tap the locator button one time and the locator LED will quickly flash green.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DL15S</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the top paddle for 14 seconds (after the first 7 seconds the LED will turn Amber).<br />
#The Locator LED will alternate flashing Red and Amber after 14 seconds.<br />
#Release the top paddle to complete the factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Hold the top paddle for 7 seconds (The locator LED will flash Amber).<br />
#Tap the top paddle and the Locator LED will quickly flash Green<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the top paddle for 14 seconds (after the first 7 seconds the LED will turn Amber).<br />
#The Locator LED will alternate flashing Red and Amber after 14 seconds.<br />
#Release the top paddle to complete the factory reset.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>4-Scene Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>VRCS4</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#On the 4-Scene controller, press and hold buttons '''1''' and '''3'''.<br />
#Wait approximately '''5''' seconds until the LED turns amber and then solid red.<br />
#Release the buttons and the 4-Scene controller will be reset. '''NOTE: Factory reset does not exclude the device from any previous networks it has joined. The exclusion process must still be performed separately.'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
'''Leaving the Z-Wave Network'''<hr /><br />
<br />
=='''<big>Linear</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Linear (GoControl)</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>WADWAZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*'''See [[Discovering your Devices|Discovering your devices]] for detail instructions.'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Depress the Tamper switch for '''1''' second then release. The LED on the sensor will begin flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#The LED on the sensor will stop flashing<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Tamper switch of WADWAZ-1 for '''1''' second and release to exclude the device form the Z-wave network.<br />
#The LED light will flash continuously when the sensor is in the excluded condition.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Linear (GoControl)</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>WAPIRZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Depress the Tamper switch for '''1''' second then release. The LED on the sensor will begin flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#The LED on the sensor will stop flashing<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Tamper switch of WAPIRZ-1 for '''1''' second and release to exclude the device form the Z-wave network.<br />
#The LED light will flash continuously when the sensor is in the excluded condition.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Linear (GoControl)</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren / Strobe</big>'''</div><br />
|<div style="text-align: center;">'''<big>WA105DBZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the siren/strobe Program/Tamper switch for '''1''' second then release. The LED on the sensor will begin flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#The LED on the sensor will stop flashing<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the siren/strobe Program/Tamper switch for '''1''' second then release to exclude the device form the Z-wave network.<br />
#The LED light will flash continuously when the sensor is in the excluded condition.<br />
<br />
<hr /><br />
=='''<big>Lutron</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Aurora</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press the center button '''3''' times and hold on the thrid press for aproximatley '''6''' seconds until the LED flashes.<br />
#Once LED is flashing quickly tap button '''3''' time again.<br />
#The LED will flash rapidly to indicate the device has been successfuly reset for factory defaults.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly press the center button on the Aurora '''2''' times to begin pairing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Dimmers and Switches</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Dimmer / Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#All paired Pico remote controls are removed and all settings are returned to factory default.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Caséta Smart Bridge Pro</big>'''</div><br />
|<div style="text-align: center;">'''<big>L-BDGPRO2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bridge</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Network Reset'''<br />
<br />
#First, press and hold the black button on the back of your Smart Bridge for '''20''' seconds.<br />
<br />
'''Factory Reset'''<br />
<br />
#Quickly tap the button '''3''' times and hold. '''DO NOT release after the third tap'''.<br />
#Continue to hold the Add button for a few seconds. The LEDs will begin to flash slowly (approximately once per second).<br />
#Release the button and quickly tap the button '''3''' times. The LEDs will flash quickly and then will turn off. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly)<br />
#The Lutron Smart Bridge Pro has now been returned to Factory Default Settings.<br />
<br />
'''NOTE''': ''Lutron does not recommend factory resetting a Smart Bridge Pro unless advised by a member of the Lutron technical support team.''<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Pico Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>PJ2-</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#All paired Pico remote controls are removed and all settings are returned to factory default.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Keypads</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#The RA2 keypad has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Main Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>RR-MAIN-REP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the Test button on a Main Repeater '''3''' times. '''DO NOT release the button after the third tap.'''<br />
#Keep the Test button pressed on the third tap until all the LEDs start to flash red slowly (approximately '''3''' seconds).<br />
#Release the Test button and immediately tap '''3''' times again. All the LEDs will flash Red quickly.<br />
#When the LEDs stop flashing, the Main Repeater has been returned to factory settings<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Occupancy Sensors</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
*'''Radio Powr Savr™ Occupancy/Vacancy Ceiling Sensor – 1st Generation (LRF2-xCRB-)'''<br />
<br />
#Quickly tap '''3''' times and hold the Test, Lights ON, or Lights OFF button on the Sensor. '''DO NOT release after third tap'''.<br />
#Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second).<br />
#Release the button and tap it again '''3''' times until the dome LED on the Sensor flashes quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Sensor has now been returned to Factory Default Settings.<br />
<br />
*'''Radio Powr Savr™ Occupancy/Vacancy Ceiling Sensor – 2nd Generation (LRF2- xCR2B-)'''<br />
<br />
#Quickly tap '''3''' times and hold the Test or Light button on the Sensor. '''DO NOT release after third tap.'''<br />
#Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second).<br />
#Release the button and tap '''3''' times again until the dome LED on the Sensor flashes quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Sensor has now been returned to Factory Default Settings.<br />
<br />
*'''Radio Powr Savr™ Occupancy/Vacancy Wall-Mounted Sensor'''<br />
<br />
#Quickly triple tap and hold the Sensor, Lights ON, or Lights OFF button on the Sensor. '''DO NOT release after third tap.'''<br />
#Keep the button pressed after the third tap for a few seconds until the lens LED begins to flash slowly (approximately once per second).<br />
#Release the button and tap it again '''3''' times until the lens LED on the Sensor flashes quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Sensor has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Select Main Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>RR-SEL-REP2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly tap '''3''' times and hold down any button on the Main Repeater. '''DO NOT release after the third tap.'''<br />
#Continue to hold the button for a few seconds. The Main Repeater LEDs will begin to flash Red slowly (approximately once per second).<br />
#Release the button and quickly tap '''3''' times again. The Main Repeater LEDs will flash Green rapidly and then will reset, turning off all LEDs and then flashing the LEDs and beeping once. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Main Repeater and system components have now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device.<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>RadioRA2 VCRX Visor Control Receiver</big>'''</div><br />
|<div style="text-align: center;">'''<big>RR-VCRX</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly tap '''3''' times and hold any button (except Learn) on the VCRX. '''DO NOT release after third tap.'''<br />
#Keep the button pressed after the third tap for a few seconds until all the status LEDs start to flash slowly (approximately once per second).<br />
#Release the button and tap '''3''' times again until all the status LEDs on the VCRX flash quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The VCRX has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device.<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Serena Shades</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Shade Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the shade button quickly '''3''' times, and hold the shade button after the third tap until the shade button LED flashs Green rapidly.<br />
#Immediately tap the shade button quickly '''3''' more times, until the shade button LED flashes '''Green''' rapidly, then flashes '''Red/Green''' '''3''' times, and turns off.<br />
#The Serena shade has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Sivoia QS Triathlon Shades</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Shade Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the shade button quickly '''3''' times, and hold the shade button after the third tap until the shade button LED flashs Green rapidly.<br />
#Immediately tap the shade button quickly '''3''' more times, until the shade button LED flashes '''Green''' rapidly, then flashs '''Red/Green''' '''3''' times, and turns off.<br />
#The Sivoia shade has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>RadioRA2 Fan Control</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>RRD-2ANF</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the tapswitch '''3''' times on a control. '''DO NOT release after the third tap.'''<br />
#Keep the tapswitch pressed on the third tap (for approximately '''3''' seconds) until the LEDs on the dimmer start to scroll up and down quickly, or the LED on the switch flashes quickly<br />
#Release the tapswitch and immediately tap it '''3''' times again.<br />
#The LEDs on the dimmer will scroll up and down slowly and then the LED on the switch will flash slowly, indicating it has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device.<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Caséta Fan Control</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PD-FSQN</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#All paired Pico remote controls are removed and all settings are returned to factory default.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
=='''<big>LUX</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lux</big>'''</div><br />
|<div style="text-align: center;">'''<big>KONOz</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Access the installation settings by going to the main menu and selecting the gear icon.<br />
#You will see “IS” on the screen and will be prompted to select “yes” or “no”.<br />
#Select “yes” to access the installation settings.<br />
#Rotate the knob to view settings and press the knob to confirm.<br />
#Once in the installer settings, rotate the knob to '''99'''.<br />
#Press the knob to confirm, then press and hold the knob for '''3''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform factory reset.<br />
#KONOz is now ready to be configured for your heating and cooling system. The KONOz will guide you through the initial system configuration.<br />
#After confirming your system settings, KONOzwill ask if you would like to connect to a Smart Hub. Select “SET” to establish a connection.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Perform factory reset.<br />
<br />
<hr /><br />
=='''<big>MCO Home</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>MCO Home</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>MH-DT311</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press '''10''' times of any button or exclude the device from Z-Wave network, then cut off the main power.<br />
#The factory setting will be restored.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press 3 times on "+" or "-" button to add the device. If successful, the green LED flashes '''4''' times.<br />
#*Note: If an external switch is wired to the dimmer, you may also toggle that '''3''' times to add the device to the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press 3 times on "+" or "-" button to exclude the device from the network. If successful, the green LED flashes '''4''' times.<br />
#*Note: If an external switch is wired to the dimmer, you may also toggle that '''3''' times to add the device to the network.<br />
<br />
<hr /><br />
=='''<big>Monoprice</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>24259</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To reset the sensor, press and hold the Z-button for about '''20''' seconds.<br />
#The LED will change from steadily illuminated to flashing then back to steadily illuminated, indicating that the reset operation was successful.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to include the device in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to exclude the device from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Plug-In Dimmer</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>11994</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device, returning the device to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Plug-In ON/OFF</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>11995</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device, returning the device to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Recessed Door/Window sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15268</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-button for '''20''' seconds and then release it. Your sensor will now be reset to its original settings<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-button on your sensor. If your sensor has been successfully linked to your network, its LED will turn solid for '''2''' seconds and then turn off.<br />
#If linking was unsuccessful, the LED will continue to flash if you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-button on your Sensor. If your switch has been successfully unlinked to your network, its LED will start to flash for a short time.<br />
#If linking was unsuccessful, the LED will return to its last state. Tap the button to confirm if it has been unpaired, if unpaired successfully, the LED will flash when tapped.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15270</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device and return it to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device. The LED will stop flashing and glow steading to indicate the device has joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PIR Motion Sensor with Temperature</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15271</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device and return it to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device. The LED will stop flashing and glow steading to indicate the device has joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Plug-in Outlet</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15654</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-button for '''20''' seconds and then release it. Your sensor will now be reset to its original settings<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the plug-in has not already been included into a Z-Wave network, the LED indicator will flash rapidly. Otherwise, the plug-in has already been included and must first be excluded before it can join the Hubitat Elevation™ Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click the Z-Button '''3''' times. The plug-in will be removed from your Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>4 in 1 motion sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15902</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the program button, the LED will flash, indicating the sensor is no longer joined to the Z-Wave network and has returned it to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Momentarily press the '''Program Switch'''<br />
#The LED should flash '''5''' times indicating the sensor has not yet been included in the Z-Wave network.<br />
#If the LED flashes only '''1''' time, then it has already been included in a Z-Wave network and must first be excluded before it may join the Hubitat Elevation™ Z-Wave network.<br />
#Momentarily press the button again after it flashes '''5''' times, to automatically include the sensor in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program button, the LED will flash, indicating the sensor is no longer joined to the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Smart Plug and Repeater</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>27481</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the Z-Button on the smart plug for more than '''20''' seconds.<br />
#The LED indicator will illuminate Yellow steadily for about '''2''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to include the device in the network.<br />
<br />
'''Testing the Smart Plug Z-Wave connection'''<br />
<br />
You can test the connectivity of the Z-Wave network connection, with the RGB LED being used to indicate the connection quality.<br />
<br />
To begin testing, press and hold the Z button for '''6-9''' seconds, releasing the button when the RGB LED illuminates violet.<br />
<br />
*'''''Note'':''' The smart plug must be included into a Z-Wave network to test the network connection. You can abort the test at any time by pressing the Z button.<br />
**'''Flashing Green''': The RGB LED will flash Green while the smart plug is attempting to establish a connection with the main controller.<br />
**'''Solid Green''': The RGB LED will illuminate Green for about '''2''' seconds to indicate that direct communications are stable.<br />
**'''Flashing Orange''': The RGB LED will flash Orange while the smart plug is attempting to establish a connection with the main controller with intermediate radio transmitting power.<br />
**'''Solid Orange''': The RGB LED will illuminate Orange for about '''2''' seconds to indicate that the communication quality is moderate.<br />
**'''Solid Red''': The RGB LED will illuminate Red for about '''2''' seconds to indicate that they communications attempt has failed.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to exclude the device from the network.<br />
#The RGB LED will flash Orange while the smart plug is being removed.<br />
#The smart plug will be removed from your Z-Wave network and the RGB LED will then illuminate Orange steadily for about '''2''' seconds.<br />
<br />
<hr /><br />
==<big>'''NanoLeaf'''</big>==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NanoLeaf</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Light Panels</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Aurora / Canvas</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Disconnect power to the Nanoleaf Light Panels.<br />
#Hold the Toggle and Power buttons together and reconnect the power without releasing the buttons.<br />
#After about '''7''' seconds, the WiFi status LED will start to flash rapidly.<br />
#Once the flashing begins, you can release the buttons.<br />
#You must then wait '''3''' minutes for the Nanoleaf Light Panels to reset to factory default settings and boot-up.<br />
<br />
'''Join the LAN'''<br />
<br />
#Use the '''NanoLeaf Smarter Series''' app from your mobile device to setup your light panels on the WiFi network.<br />
#From the Hubitat Web Interface home page, select '''Devices''', then '''Add Virtual Device'''<br />
#*See [[Devices]] for further detail.<br />
#Name your device and select '''Nanoleaf Aurora''' from the device ''Type'' drop-down menu, and press '''Save'''.<br />
#In the Preferences field of the driver, enter the IP address of your Nanoleaf panel.<br />
#*'''NOTE:''' You should reserve the IP address for your NanoLeaf light panels in your router just as you do for your Hubitat Elevation™ hub. If you do not, the IP address will change when the DHCP lease on your router expires for connected IP devices. The result will be that the NanoLeaf Aurora driver will no longer be able to find your device.<br />
#Press '''Save''' again in the driver.<br />
#One your NanoLeaf panel, press the pairing button.<br />
#In the NanoLeaf Aurora driver, press the '''Get Auth Token''' button.<br />
#Test your panel for proper operation.<br />
#*<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Plug your Light Panels into power. After a '''1''' minute bootup sequence the panels will show the last scene that was playing<br />
#Press and hold down the '''Effect Select''' and '''Power''' buttons on the controller for about '''10''' seconds, until the LED on the controller begins flashing<br />
#Release the two buttons and the LED on the controller will remain on and steady<br />
#Delete the previous device from the app and setup once again<br />
<hr /><br />
=='''<big>Neo</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-DS01ZE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove tlease expires for the assigned IP address.<br />
#<br />
#he cover of contact sensor main body.<br />
#Make sure the sensor is connected to power source.<br />
#Press and hold the reset button for '''10''' seconds, the LED light will flash Red once.<br />
#Release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The contact sensor will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times and the sensor will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-DS02ZU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the cover of contact sensor main body.<br />
#Make sure the sensor is connected to power source.<br />
#Press and hold the reset button for '''10''' seconds, the LED light will flash Red once.<br />
#Release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The contact sensor will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times and the sensor will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-PD01ZU-T</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the sensor’s cover.<br />
#Make sure the sensor is connected to power source.<br />
#Press the code button for '''10''' seconds, the LED will flash Red once.<br />
#Release the code button.<br />
#*'''NOTE:''' When the PIR is being restored to factory settings, please make sure a power source is connected.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The motion sensor will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times and the sensor will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Power Plug</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-WR02Z</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the code button on the front of the outlet for '''10''' seconds.<br />
#When the LED flashes, release the button.<br />
#When the outlet has been reset, the LED will flash on and off '''5''' times within a '''2''' second period.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash for '''5''' times and the device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>One Key SOS</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-RC03ZU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the code button for '''10''' seconds.<br />
#Release the Code button. '''Note:''' Do not power off during factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times and the device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>One Key SOS and Remote Control</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-RC03ZU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the code button for '''10''' seconds.<br />
#Release the Code button. '''Note:''' Do not power off during factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times and the device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>NodOn</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NodOn</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Octan Remote</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>CRC-3US-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#A simultaneous long press ('''1''' second) on '''O''' and '''<big>–</big>''' will perform this factory reset.<br />
#The LED will flash '''red''' and '''green''' to validate the reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NodOn</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Soft Remote</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>CRC-3US-6</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#A simultaneous long press ('''1''' second) on '''O''' and '''<big>–</big>''' will perform this factory reset.<br />
#The LED will flash '''red''' and '''green''' to validate the reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>NYCE</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Curtain Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3045-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button '''4''' times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Ceiling Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3043-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the Mounting Plate by rotating the Housing counter-clockwise as shown.<br />
#Inside the battery compartment is a small button on the side of the circuit board.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Mounting Plate by rotating the Housing counter-clockwise as shown.<br />
#Inside the battery compartment is a small button on the side of the circuit board.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button '''4''' times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the Mounting Plate by rotating the Housing counter-clockwise as shown.<br />
#Inside the battery compartment is a small button on the side of the circuit board.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3041-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button 4 times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Garage Door (Tilt) Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3014-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide open the Garage Door (Tilt) Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide open the Garage Door (Tilt) Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button 4 times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed, and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Slide open the Garage Door (Tilt) Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3011-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide open the Door/Window Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide open the Door/Window Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button 4 times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed, and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Slide open the Door/Window Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
=='''<big>Orbit</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Orbit</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Smart Hose Faucet Timer</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>27087</big>'''</div><br />
|<div style="text-align: center;">'''<big>Irrigation Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Insert two AA alkaline batteries and re-insert the tray.<br />
#Press the RESET button '''5''' times in rapid secession.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide out the battery tray on the back of the timer.<br />
#Insert two AA alkaline batteries and re-insert the tray.<br />
#*'''NOTE:''' Firmly replace the battery tray to ensure water resistance and increase battery life. You will know the battery tray is fully inserted if it does not pull out easily.<br />
#Turn the dial to '''AUTO'''.<br />
#When batteries are inserted, the timer will automatically attempt to connect and the wireless icon on screen will begin to flash.<br />
#*'''NOTE:''' The timer will remain in pairing mode for '''10''' minutes or until paired'''.''' If pairing is not successful after '''10''' minutes, the timer will stop trying to pair. To enter pairing mode again press the RESET button '''5''' times in rapid secession.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press the RESET button '''5''' times in rapid secession.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Orbit</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>12-Station Sprinkler Controller</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>27396</big>'''</div><br />
|<div style="text-align: center;">'''<big>Irrigation Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure the controller is connected to power.<br />
#Press the SYNC button '''5''' times in rapid secession.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Ensure the controller is connected to power.<br />
#Turn the dial to '''AUTO'''.<br />
#When the controller is first connected to power, it will automatically attempt to connect. <br />
#*'''NOTE:''' If pairing is not successful after '''10''' minutes, the controller will stop trying to pair. To re-enter pairing mode, push the 'SYNC' button '''5''' times in rapid succession<br />
#The wireless icon will flash until the controller is paired. Once paired, the wireless icon will remain solid, and the words '''SMART MODE''' will appear on the screen.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the <nowiki/>device details page to confirm proper operation<br />
<br />
'''Leaving the Zigbee Netwo'''<nowiki/>'''rk'''<br />
<br />
#From the device's detail<nowiki/>s page, select '''Remove Device''', then '''Remove'''.<br />
#Press the RESET button '''5'''<nowiki/> times in rapid secession. The device will try to re-connect again, so you will need to let it time out or hold the SYNC button for '''5''' seconds to cancel re-pairing.<br />
<hr /><br />
<br />
=='''<big>Orvibo</big>'''==<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Obvibo</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>SN11</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold down the reset button on the front of the motion sensor until the '''Green light''' goes out.<br />
#This will disconnect the sensor from the Zigbee network.<br />
#Short-press the reset button and the '''Green light''' will flash slowly.<br />
#The sensor is now in pairing mode.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the cover by rotating it counterclockwise<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold down the reset button on the front of the motion sensor until the '''Green light''' goes out.<br />
#This will disconnect the sensor from the Zigbee network.<br />
#Short-press the reset button and the '''Green light''' will flash slowly.<br />
#The sensor is now in pairing mode.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold down the reset button on the front of the motion sensor until the '''Green light''' goes out.<br />
#This will disconnect the sensor from the Zigbee network.<br />
<br />
<hr /><br />
=='''<big>OSRAM</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Osram</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lightify Flex RGBW</big>'''</div><br />
|<div style="text-align: center;">'''<big>73698</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat '''5''' times - Unplug for '''1''' second and then plug in for '''1''' second<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat 5 times - Unplug for '''1''' second and then plug in for '''1''' second<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat 5 times - Unplug for '''1''' second and then plug in for '''1''' second<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Osram</big>'''</div><br />
|<div style="text-align: center;">'''<big>All smart bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the light off<br />
#Turn the light on for three '''3''' seconds<br />
#Turn the light off<br />
#Repeat this cycle '''5''' times<br />
#Wait 10 seconds for the light to flash '''3''' times<br />
#Repeat these steps if the light does not flash three times<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the light off<br />
#Turn the light on for three '''3''' seconds<br />
#Turn the light off<br />
#Repeat this cycle '''5''' times<br />
#Wait 10 seconds for the light to flash '''3''' times<br />
#Repeat these steps if the light does not flash '''3''' times<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the light off<br />
#Turn the light on for three '''3''' seconds<br />
#Turn the light off<br />
#Repeat this cycle '''5''' times<br />
#Wait 10 seconds for the light to flash '''3''' times<br />
#Repeat these steps if the light does not flash '''3''' times<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Osram</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Outdoor Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>G11028081</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
'''NOTE:''' ''Reset method may vary by firmware version''<br />
<br />
'''Method 1'''<br />
<br />
#Hold the button for '''30''' seconds<br />
#The outdoor plug will click '''5''' times<br />
#The outdoor plug is now reset and ready for pairing<br />
<br />
'''Method 2'''<br />
<br />
#Turn the outdoor plug off<br />
#Turn the outdoor plug on for three '''5''' seconds<br />
#Turn the outdoor plug off<br />
#Repeat this cycle '''5''' times<br />
#The outdoor plug is now reset and ready for pairing<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#See factory reset instructions above to reset the outdoor plug and ready it for pairing . The required steps will vary by firmware version.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#See factory reset instructions above. The required steps will vary by firmware version.<br />
<br />
<hr /><br />
=='''<big>Philips Hue</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>046677553715</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the smart button over and remove the back cover. Use a straightened paperclip to press the '''setup''' button on the back for 5 seconds. An LED on the front of the sensor will flash once to confirm factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Turn the smart button over and remove the back cover. Use a straightened paperclip to press the '''setup''' button on the back for 5 seconds. An LED on the front of the sensor will flash once to confirm reset.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button until the LED on the front of the button is flashing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the smart button over and remove the back cover. Use a straightened paperclip to press the '''setup''' button on the back for 5 seconds. An LED on the front of the sensor will flash once to confirm factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>73698</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the dimmer switch over and use a straightened paperclip to press the '''setup''' button on the back for '''1''' second.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the dimmer switch over and use a straightened paperclip to press the '''setup''' button on the back for '''1''' second.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the dimmer switch over and use a straightened paperclip to press the '''setup''' button on the back for '''1''' second.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>473389</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#On the back of the motion sensor, and use a straightened paperclip to press the '''setup''' button for '''1''' second.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the back of the motion sensor, and use a straightened paperclip to press the '''setup''' button for '''1''' second.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#On the back of the motion sensor, and use a straightened paperclip to press the '''setup''' button for '''1''' second.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>046677552343</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the power button for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press the power button for '''10''' seconds to factory reset the smart plug.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the power button for '''10''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>All Hue Lights</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#You must use a Hue Dimmer to factory reset a Hue bulb, light fixture or LED strip that is not attached to a Hue bridge.<br />
#Turn on the light on to be reset, ensuring other bulbs within a few inches are unscrewed or unplugged or they may be reset too.<br />
#Hold the remote within '''4''' inches of the light.<br />
#Press and hold the 1st (On / I in some countries) and the and 4th (Off / O in some countries) buttons simultaneously for about '''10''' seconds, until the light starts flashing on and off.<br />
#When the light stops flashing, it will remain ON at full brightness, and the green LED on the remote will flash green, indicating the bulb has been factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Using a Hue dimmer, factory reset the light as described above.<br />
#Disconnect the light from mains power.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power on the light<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Using a Hue dimmer, factory reset the light as described above.<br />
<br />
<hr /><br />
=='''<big>Powerly</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Powerly</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To reset to factory defaults, turn the thermostat off by pressing '''Mode''' repeatedly until OFF scrolls across the display.<br />
#Press and hold the '''down''' and '''up''' Setpoint arrows at the same time for '''5''' seconds.<br />
#If successful, '''RESET''' will scroll across the display and the device will be restored to its default settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To put your thermostat into inclusion mode, press and hold '''Mode''' for '''5''' seconds.<br />
#'''CONNECT''' will scroll across the thermostat display once in inclusion mode.<br />
#'''SUCCESS''' will scroll across the thermostat display once included, but '''FAIL''' will scroll across the thermostat display if inclusion is unsuccessful,<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#To exclude your Thermostat, press and hold '''Mode''' for '''5''' seconds to initiate the Z-Wave exclusion process.<br />
#'''DELETE''' will scroll across the thermostat display once in exclusion mode. If you need to cancel the exclusion process, press '''Mode'''.<br />
#To complete exclusion, press either the up or down arrow.<br />
#'''SUCCESS''' will scroll across the thermostat display once excluded.<br />
<hr /><br />
=='''<big>Qubino</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush 1 Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHAD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''5''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''5''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush 1D Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHND3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''5''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush 2 Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHBD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush Shutter DC</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHOD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''3''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush Shutter</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHCD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush ON/OFF Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHID3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHDD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''3''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than 6 seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal 3 times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mini Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHHD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply.<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''3''' seconds.<br />
#Alternatively, press and hold the '''S''' (Service) button for at least '''6''' seconds if connected to 24-30VDC<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply.<br />
#Toggle the switch connected to the I1 terminal 3 times within 3 seconds (this procedure puts the device in LEARN MODE).<br />
#Alternatively, press and hold the S (Service) button between 2~6 seconds if connected to 24-30VDC to put the device in LEARN MODE).<br />
<br />
*'''NOTE:''' Inclusion with the switch connected to I1 terminal is not limited by time.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Connect the device to the power supply.<br />
#Toggle the switch connected to the I1 terminal 3 times within 3 seconds (this procedure puts the device in LEARN MODE).<br />
#Alternatively, press and hold the S (Service) button between 2~6 seconds if connected to 24-30VDC to put the device in LEARN MODE).<br />
<br />
*'''NOTE:''' Exclusion with the switch connected to I1 terminal is not limited by time.<br />
<br />
<hr /><br />
=='''<big>Quotra</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Quotra</big>'''</div><br />
|<div style="text-align: center;">'''Wireless Smart Dimmer'''</div><br />
|<div style="text-align: center;"><br />
'''<big>B07CVL9SZF</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the power button for '''10''' seconds.<br />
#Rlease when the LED slowly fades in and out (this will only happen for 3 seconds).<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the power button for '''10''' seconds.<br />
#Rlease when the LED slowly fades in and out (this will only happen for 3 seconds).<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the power button for '''10''' seconds.<br />
#Rlease when the LED slowly fades in and out (this will only happen for 3 seconds).<br />
<br />
<hr /><br />
=='''<big>Radio Thermostat Company of America</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Radio Thermostat Company of America</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>CT-101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#The thermostat must be in OFF mode.<br />
#Wait until the radio wave icons on the left side of the screen stop flashing then touch the screen once to turn on the back light and then hold the center of the screen for about '''8''' seconds until the thermostat beeps.<br />
<br />
'''Factory Reset''' '''(Alternate Method)'''<br />
<br />
#Place the CT101 in the off position by pressing mode button until '''OFF''' is shown at the top left of the screen.<br />
#Press the menu button<br />
#Press and hold the center of the screen for about 5 sec or until the screen changes then release.<br />
#You will see two arrows. First press the up arrow and wait for the count down.<br />
#Now press the down arrow and again, wait for the count down.<br />
#All parameter values will be restored to defaults and a message is sent to any radio module installed to instruct the module to restore its own default values.<br />
#*The thermostat will now resets itself.<br />
#Press the house to get back to the main screen.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press/Touch the MATE button on the MENU screen. A large '''r1''' will be displayed.<br />
#This will bring you to the network include screen. Confirm by touching MATE again to initiate the mating process. The MATE icon and the status indicator LEDs will flash.<br />
#When a device has joined a network the LINK icon will appear under the radio tower.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press/Touch the MATE button on the MENU screen. A large '''r1''' will be displayed.<br />
#This will bring you to the network include screen. Confirm by touching MATE again to initiate the mating process. The MATE icon and the status indicator LEDs will flash.<br />
#When a device has excluded from the network, the LINK icon will disappear under the radio tower.<br />
<br />
<hr /><br />
=='''<big>Remotec</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Remotec</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay / Fixture Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZFM-80US/DA065</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Factory reset is accomplished by excluding the device from the Z-Wave netowrk<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click once on the PROG button or and external attached switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Click once on the PROG button or and external attached switch.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click once on the PROG button or and external attached switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Remotec</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZRC-90 Scene Master</big>'''</div><br />
|<div style="text-align: center;">'''<big>REMEZRC90</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and keep holding '''R''' button not less than '''10''' seconds.<br />
#Release '''R''' button then triple click on the same '''R''' button within 2 seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press '''L''' & '''R''' buttons simultaneously until the LED lights up to add the device to the Z-Wave network. The LED will keep flashes slowly.<br />
#Press the program button. The LED will flash once, then remain off if the device is included into the Z-Wave network.<br />
#If the LED flashes '''6''' times rapidly, then remains off, the device has failed to be included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click once on the '''R''' button to remove the device from the Z-Wave network. The LED will continue flashing slowly.<br />
#Press the program button. The LED will flash once, then remain off if the device is excluded from the Z-Wave network.<br />
#If the LED flashes '''6''' times rapidly, then remains off, the device has failed to be excluded in the Z-Wave network.<br />
#Perform a factory reset and repeat the above steps to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>RGBgenie</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>4 Channel Dimming Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-1003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly 5 times.<br />
#The LED will flash quickly and then stay in a slow rhythmic breathing pattern to indicate a successful reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly 5 times.<br />
#The LED will flash quickly and then stay in a slow rhythmic breathing pattern to indicate a successful reset and the device is ready for pairing.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Color controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-1025</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly '''5''' times.<br />
#The LED will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly '''5''' times.<br />
#The LED will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single color remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-5121</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the middle (Light ON) button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGB color remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-5122</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the middle (Light ON) button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Monochrome controller panel</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-3026</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold down the power button on the Touch Panel until the LED indicator turns on.<br />
#Immediately press the power button '''5''' times.<br />
#The LED indicator will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the '''power button''' until the LED status indicator turns on.<br />
#Immediately press the '''S1''' button once to enable the Touch Panel to search for nearby networks. The LED indicator will flash once every second.<br />
<br />
'''Verifying network pairing'''<br />
<br />
#Quickly press any button and the LED indicator should flash once.<br />
#If the LED indicator does not respond, the Touch Panel is not paired with a network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single Channel Trailing Edge Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-4002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single Channel Micro Controller and Lamp Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-4003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>3 Zone Color Touch Panel</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-5027</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold down the power button on the Touch Panel until the LED indicator turns on.<br />
#Immediately press the power button '''5''' times.<br />
#The LED indicator will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the '''power button''' until the LED status indicator turns on.<br />
#Immediately press the '''S1''' button once to enable the Touch Panel to search for nearby networks. The LED indicator will flash once every second.<br />
<br />
'''Verifying network pairing'''<br />
<br />
#Quickly press any button and the LED indicator should flash once.<br />
#If the LED indicator does not respond, the Touch Panel is not paired with a network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Color Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-5028</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold down the power button on the Touch Panel until the LED indicator turns on.<br />
#Immediately press the power button '''5''' times.<br />
#The LED indicator will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the '''power button''' until the LED status indicator turns on.<br />
#Immediately press the '''S1''' button once to enable the Touch Panel to search for nearby networks. The LED indicator will flash once every second.<br />
<br />
'''Verifying network pairing'''<br />
<br />
#Quickly press any button and the LED indicator should flash once.<br />
#If the LED indicator does not respond, the Touch Panel is not paired with a network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Color controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-1001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold down Inclusion/Exclusion button for over '''10''' seconds<br />
#The connected LED light will stays ON solid for '''3''' seconds to indicate successful factory reset<br />
#Release Inclusion/Exclusion button and all 4 PWM outputs will restore to 50% brightness.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power on the LED dimmer<br />
#If the connected LED light has a solid ON status, it means the LED dimmer has already been included into a network and you first you have to set the LED dimmer into '''Exclusion''' mode.<br />
#Once excluded, it will be set into '''Inclusion''' mode automatically, and waiting to be included in the Z-Wave network.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple press the “inclusion/exclusion” button<br />
#The LED dimmer will be set to '''Exclusion''' mode and the connected LED light will flash quickly for 6 seconds<br />
#The LED light will stay ON solid for '''3''' seconds to indicate successful exclusion.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Color controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-1002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold down Inclusion/Exclusion button for over '''10''' seconds<br />
#The connected LED light will stays ON solid for '''3''' seconds to indicate successful factory reset<br />
#Release Inclusion/Exclusion button and all 4 PWM outputs will restore to 50% brightness.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power on the LED dimmer<br />
#If the connected LED light has a solid ON status, it means the LED dimmer has already been included into a network and you first you have to set the LED dimmer into '''Exclusion''' mode.<br />
#Once excluded, it will be set into '''Inclusion''' mode automatically, and waiting to be included in the Z-Wave network.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple press the “inclusion/exclusion” button<br />
#The LED dimmer will be set to '''Exclusion''' mode and the connected LED light will flash quickly for 6 seconds<br />
#The LED light will stay ON solid for '''3''' seconds to indicate successful exclusion.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro controller and Lamp Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-4001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold down '''Reset''' button for over '''10''' seconds<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power on the micro controller<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''Reset''' button '''3''' times quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''Reset''' button '''3''' times quickly.<br />
<br />
<hr /><br />
<br />
=='''<big>Ring</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Range Extender v1</big>'''</div><br />
|<div style="text-align: center;">'''<big>4AR1S70EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the Range Extender.<br />
#Press and hold the button on the right side of the device. The LED on the device will flash rapidly.<br />
#When the LED begins to flash slowly, release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the right side of the device to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button on the right side of the device to '''Exclude''' the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Contact Sensor v1</big>'''</div><br />
|<div style="text-align: center;">'''<big>4SD1S70EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Open the contact sensor cover.<br />
#Remove the battery from the device.<br />
#Press and hold the tamper switch while reinstalling the battery.<br />
#The LED will be flashing. Keep holding the tamper switch until the LED turns off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the contact sensor cover.<br />
#Quickly remove and replace the battery to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Open the contact sensor cover.<br />
#Quickly remove and replace the battery to '''Exclude''' the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Motion Sensor v1</big>'''</div><br />
|<div style="text-align: center;">'''<big>4SP1S70EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Insert a straightened paper clip into the pinhole at the back of the motion detector.<br />
#Press and hold the reset button.<br />
#The LED will be flashing. Keep holding the reset button until the LED turns off.<br />
#Open the motion sensor cover.<br />
#Quickly remove and replace the battery to complete factory reset of the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the motion sensor cover.<br />
#Quickly remove and replace the battery to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Open the motion sensor cover.<br />
#Quickly remove and replace the battery to '''Exclude''' the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Smoke/CO Listener</big>'''</div><br />
|<div style="text-align: center;">'''<big>4SS1S80EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke/CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the setup button on the side of the device for '''10''' seconds.<br />
#When the LED stops flashing, the device has been factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the Smoke/CO Listener cover.<br />
#Quickly remove and replace the battery.<br />
#Press the setup button on the side of the device to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Open the Smoke/CO Listener cover.<br />
#Quickly remove and replace the battery.<br />
#Press the setup button on the side of the device to '''Exclude''' it from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>SAGE</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SAGE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell Sensor</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Doorbell Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the plastic cover and the battery.<br />
#Press and hold the tiny RESET button (next to where the wires attach to the circuit board) while you reinstall the battery.<br />
#Continue holding RESET until the Red LED flashes.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the plastic cover and the battery.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the tiny RESET button (next to where the wires attach to the circuit board) while you reinstall the battery.<br />
#Continue holding RESET until the Red LED flashes.<br />
#If the device is not discovered by Hubitat Elevation™, then move the device closer to the hub and try again. It should now be discovered by the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Remove the plastic cover and the battery.<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the tiny RESET button (next to where the wires attach to the circuit board) while you reinstall the battery.<br />
#Continue holding RESET until the Red LED flashes.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SAGE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Light Switch Controller</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Light Switch Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery from the light switch.<br />
#Press and hold the rocker switch in the '''ON''' position as you reinstall the battery.<br />
#Continue to hold the switch in the '''ON''' position until the Red LED flashes.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the battery from the light switch.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the rocker switch in the '''ON''' position as you reinstall the battery.<br />
#Continue to hold the switch in the '''ON''' position until the Red LED flashes.<br />
#If the device is not discovered by Hubitat Elevation™, then move the device closer to the hub and try again. It should now be discovered by the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Remove the battery from the light switch.<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the rocker switch in the '''ON''' position as you reinstall the battery.<br />
#Continue to hold the switch in the '''ON''' position until the Red LED flashes.<br />
<br />
<hr /><br />
=='''<big>Salus</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Salus</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>SP-600</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the button on the outlet for '''10''' seconds.<br />
#The light surrounding the button will flash Red '''5''' times, and will then go out.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the outlet for '''10''' seconds.<br />
#The light surrounding the button will flash Red '''5''' times, and will then go out.<br />
#If the device is not discovered by Hubitat Elevation™, then unplug the outlet for 10 seconds and plug it in again. It should now be discovered by the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button on the outlet for '''10''' seconds.<br />
#The light surrounding the button will flash Red '''5''' times, and will then go out.<br />
<br />
<hr /><br />
=='''<big>Samsung SmartThings</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet 2017</big>'''</div><br />
|<div style="text-align: center;">'''<big>F-OUT-US-2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED starts flashing '''Blue'''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the Outlet is within '''15''' feet ('''4.5''' meters) of the hub during setup.<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED starts flashing '''Blue'''.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED starts flashing '''Blue'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-OTP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED flashes '''Blue''' 3 times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED flashes '''Blue''' 3 times'''.'''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED flashes '''Blue''' 3 times.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-BTP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing '''Red'''.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5 seconds.'''<br />
#Release the button when the LED starts flashing '''Red.'''<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing '''Red'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-MTP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash red and green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Sensor V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-WLP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-MPP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash red and green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
=='''<big>Schlage</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Schlage</big>'''</div><br />
|<div style="text-align: center;">'''<big>LiNK Deadbolt</big>'''</div><br />
|<div style="text-align: center;">'''<big>BE-369</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Disconnect the 9V battery.<br />
#On the lock keypad, press and release the Schlage button.<br />
#Reconnect the battery and wait until the Schlage button is no longer lit.<br />
#Within '''10''' seconds, press and hold the '''Schlage button''' until it lights Green and the lock beeps.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Schlage</big>'''</div><br />
|<div style="text-align: center;">'''<big>LiNK Deadbolt</big>'''</div><br />
|<div style="text-align: center;">'''<big>FE-599</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Disconnect the 9V battery.<br />
#On the lock keypad, press and release the Schlage button.<br />
#Reconnect the battery and wait until the Schlage button is no longer lit.<br />
#Within '''10''' seconds, press and hold the '''Schlage button''' until it lights Green and the lock beeps.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Schlage</big>'''</div><br />
|<div style="text-align: center;">'''<big>Connect Deadbolt</big>'''</div><br />
|<div style="text-align: center;">'''<big>BE-468 / BE-469</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Disconnect the batteries<br />
#Press and hold the outside Schlage button<br />
#While holding the outside Schlage button, then reconnect the batteries.<br />
#Release the Outside Schlage Button. '''NOTE: If you are moving the lock to a new door, install the lock on that door before continuing.'''<br />
#To check that the lock was reset, press the outside Schlage button and enter one of the Default User Codes.<br />
#If the reset was successful, the lock will perform a setup routine. Wait until the bolt stops moving. The reset and setup are complete.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Schlage button.<br />
#Enter the '''6''' digit programming code.<br />
#Press '''0'''<br />
#A '''√''' indicates the lock successfully joined the Z-Wave network, while an '''X''' indicates that it did not successfully join the network.<br />
<br />
'''Verify Z-Wave connection status from the lock'''<br />
<br />
#Remove the battery cover.<br />
#Disconnect the battery connector.<br />
#While watching the inside Schlage button, reconnect the battery connector.<br />
#The inside Schlage button will flash if the lock is enrolled.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Schlage button.<br />
#Enter the '''6''' digit programming code.<br />
#Press '''0'''<br />
#A '''√''' indicates the lock was successfully excluded the Z-Wave network, while an '''X''' indicates that it did not successfully leave the network.<br />
<br />
<hr /><br />
=='''<big>Sengled</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Element Bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Power cycle on and off '''15''' times, '''VERY''' quickly, ending on the ON position.<br />
#*'''NOTE:''' An on and off cycle counts as '''1'''<br />
#If successful, the bulb will flash '''5''' times, and will then be in pairing mode.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power cycle on and off '''15''' times, '''VERY''' quickly, ending on the ON position.<br />
#*'''NOTE:''' An on and off cycle counts as '''1'''<br />
#If successful, the bulb will flash '''5''' times, and will then be in pairing mode.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Power cycle on and off '''15''' times, '''VERY''' quickly, ending on the ON position.<br />
#*'''NOTE:''' An on and off cycle counts as '''1'''<br />
#If successful, the bulb will flash '''5''' times, and will then be in pairing mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Window and Door Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>E1D-G73WNA</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#To reset the sensor, use the provided tool, or something equally thin like a paper clip.<br />
#Press and hold the reset button inside the unit for '''8''' seconds.<br />
#If successful, a Red light on the face of the sensor will flash '''2''' times'''.'''<br />
#*'''NOTE:''' After the sensor is reset, you will have one minute to add it to your hub.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To reset the sensor, use the provided tool, or something equally thin like a paper clip.<br />
#Press and hold the reset button inside the unit for '''8''' seconds.<br />
#If successful, a Red light on the face of the sensor will flash '''2''' times.<br />
#*'''NOTE:''' After the sensor is reset, you will have one minute to add it to your hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#To reset the sensor, use the provided tool, or something equally thin like a paper clip.<br />
#Press and hold the reset button inside the unit for '''8''' seconds.<br />
#If successful, a Red light on the face of the sensor will flash '''2''' times.<br />
#*'''NOTE:''' After the sensor is reset, you will have one minute to add it to your hub.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi-Color Light Strip</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>E1G-G8E</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''.<br />
<br />
#Press and hold the reset button inside the unit for '''10''' seconds.<br />
#If successful, the light strip will flash '''5''' times'''.'''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the reset button inside the unit for '''10''' seconds.<br />
#If successful, the light strip will flash '''5''' times'''.'''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the reset button inside the unit for '''10''' seconds.<br />
#If successful, the light strip will flash '''5''' times'''.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>E1C-NB6</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''.<br />
<br />
#Press and hold the power button for '''15''' seconds.<br />
#If successful '''Blue''' indicator light will stay on briefly, and then slowly pulse on and off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the power button for '''15''' seconds.<br />
#If successful '''Blue''' indicator light will stay on briefly, and then slowly pulse on and off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the power button for '''15''' seconds.<br />
#If successful '''Blue''' indicator light will stay on briefly, and then slowly pulse on and off.<br />
<br />
<hr /><br />
=='''<big>Sensative</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sensative Strips</big>'''</div><br />
|<div style="text-align: center;">'''<big>Guard</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Move magnet all the way to the rounded edge, You should see '''1''' short LED flash'''.'''<br />
#Move magnet towards center 2 times. You should see '''2''' LED flashes.<br />
#On the last pass, leave at rounded edge for '''10''' seconds.<br />
#*If successful, you should see '''1''' long LED flash.<br />
#*If you do not see any flashes, then the reset process was not completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Keep Strips close to its intended location during the add process.<br />
#Remove both magnets. '''1''' long flash confirms proper inclusion to the Z-Wave network.<br />
#Move the squared magnet away from the squared end and watch the status in the Hubitat Elevation™ device details to ensure proper functionality.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove both magnets. '''1''' long flash confirms proper exclusion to the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sensative Strips</big>'''</div><br />
|<div style="text-align: center;">'''<big>Drip</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Place magnet 2cm from the rounded edge for '''2''' seconds. You should see '''1 short''' LED flash.<br />
#Move between logo and the round edge '''2''' times.<br />
#On the second pass, leave the magnet here for '''10''' seconds and wait for '''1 long''' LED flash.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Move the Magnet towards the rounded edge until you see '''2''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, inclusion to the Z-wave network was successful.<br />
#If you see '''5 short''' LED flashes, then inclusion has failed and you should perform a factory reset, then repeat the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Move the magnet towards the rounded edge until '''1''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, it indicates sucessful exclusion from the Z-Wave network.<br />
#If you see '''5 short''' LED flashes, then exclusion has failed and you should perform a factory reset, then repeat the exclusion process.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sensative Strips</big>'''</div><br />
|<div style="text-align: center;">'''Comfort'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Temperature Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Place magnet 2cm from the rounded edge for '''2''' seconds. You should see '''1 short''' LED flash.<br />
#Move between logo and the round edge '''2''' times.<br />
#On the second pass, leave the magnet here for '''10''' seconds and wait for '''1 long''' LED flash.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Move the Magnet towards the rounded edge until you see '''2''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, inclusion to the Z-wave network was successful.<br />
#If you see '''5 short''' LED flashes, then inclusion has failed and you should perform a factory reset, then repeat the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Move the magnet towards the rounded edge until '''1''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, it indicates sucessful exclusion from the Z-Wave network.<br />
#If you see '''5 short''' LED flashes, then exclusion has failed and you should perform a factory reset, then repeat the exclusion process.<br />
<br />
<hr /><br />
=='''<big>Shelly</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Shelly</big>'''</div><br />
|<div style="text-align: center;">'''<big>WiFi Dimmer</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button for 10 seconds.<br />
#When the LED indicator starts to flash quickly, release the button and your device should return to AP Mode.<br />
<br />
'''Join the LAN'''<br />
<br />
#In the Preferences field of the driver, enter the IP address of your Shelly device.<br />
#*'''NOTE:''' You should reserve the IP address for your Shelly WiFi devices in your router, just as you do for your Hubitat Elevation™ hub. If you do not, the IP address will change when the DHCP lease on your router expires for connected IP devices. The result will be that the Shelly driver will no longer be able to find your device.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button for 10 seconds.<br />
#When the LED indicator starts to flash quickly, release the button and your device should return to AP Mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Shelly</big>'''</div><br />
|<div style="text-align: center;">'''<big>WiFi Switch</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch. You will hear the relay trigger itself.<br />
#After the relay makes a triggering sound, the switch should return to AP Mode.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button on the back of the device for 10 seconds.<br />
#Your device should return to AP Mode.<br />
<br />
'''Join the LAN'''<br />
<br />
#In the Preferences field of the driver, enter the IP address of your Shelly device.<br />
#*'''NOTE:''' You should reserve the IP address for your Shelly WiFi devices in your router, just as you do for your Hubitat Elevation™ hub. If you do not, the IP address will change when the DHCP lease on your router expires for connected IP devices. The result will be that the Shelly driver will no longer be able to find your device.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button for 10 seconds.<br />
#When the LED indicator starts to flash quickly, release the button and your device should return to AP Mode.<br />
<br />
<hr /><br />
=='''<big>Sinope</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee Thermostats</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Simultaneously press the '''UP''' and '''DOWN''' arrow buttons for '''10''' seconds<br />
#On the thermostat display, the radio signal icon will disappear.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously press the '''UP''' and '''DOWN''' arrow buttons to initiate device paring.<br />
#On the thermostat display, a radio signal icon will flash while connecting, and will remain solid once connected to the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Simultaneously press the '''UP''' and '''DOWN''' arrow buttons for '''10''' seconds.<br />
#On the thermostat display, the radio signal icon will disappear.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Small Electrical Load Controller</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>RM3250ZB</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the button next to the '''radio signal''' icon for '''10''' seconds.<br />
#On the device, the LED next to the radio signal icon will turn off.<br />
#All settings will be reset to factory defaults.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button next to the '''radio signal''' icon to initiate device paring.<br />
#On the device, the LED next to the radio signal icon will flash while connecting, and will remain solid once connected to the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button next to the '''radio signal''' icon for '''10''' seconds.<br />
#On the device, the LED next to the radio signal icon will turn off.<br />
#All settings will be reset to factory defaults.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Detector</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>WL4200</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Press the '''Link''' button to initiate device paring.<br />
#*The LED will flash Green while connecting.<br />
#*The LED will remain solid Green for '''10''' seconds upon sucessful connection.<br />
#*If the LED is flashing Red, the connection has failed.<br />
#Test the sensor by exposing the electrodes to a damp cloth and observing the device status on Hubitat Elevation™<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Detector</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>WL4200S</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Press the '''Link''' button to initiate device paring.<br />
#*The LED will flash Green while connecting.<br />
#*The LED will remain solid Green for '''10''' seconds upon sucessful connection.<br />
#*If the LED is flashing Red, the connection has failed.<br />
#Test the sensor by exposing the electrodes to a damp cloth and observing the device status on Hubitat Elevation™<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Valve</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>VA4200WZ</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Ensure the switch is set to position '''3''' (Zigbee connection)<br />
#Plug the valve power adapter into an AC outlet.<br />
#Simultaneously press buttons '''A and B''' for '''10''' seconds.<br />
#The LED will '''flash GREEN'''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Ensure the switch is set to position '''3''' (Zigbee connection)<br />
#Plug the valve power adapter into an AC outlet.<br />
#Press the A button to initiate device paring<br />
#*The LED will flash Green while connecting<br />
#*The LED will remain solid Green for '''10''' seconds upon sucessful connection<br />
#*If the LED is flashing Red, the connection has failed.<br />
#Test the valve by toggling '''Open''' and '''Close''' in the device detail page on Hubitat Elevation™, and observe that the valve properly opens and closes in response to the pressing to the Open and Close buttons.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Ensure the switch is set to position '''3''' (Zigbee connection)<br />
#Plug the valve power adapter into an AC outlet.<br />
#Simultaneously press buttons '''A and B''' for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>DM2500ZB</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Simultaneously press the up and down dimmer buttons for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously press the up and down dimmer buttons for '''1''' second.<br />
#*The LED will flash Blue while connecting<br />
#*The LED with flash Green when connected.<br />
#*If the LED is flashing Red, the connection has failed.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Simultaneously press the up and down dimmer buttons for '''10''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>SW2500ZB</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Simultaneously press the ON and OFF buttons for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously press the ON and OFF buttons for '''1''' second.<br />
#*The LED will flash Blue while connecting<br />
#*The LED with flash Green when connected.<br />
#*If the LED is flashing Red, the connection has failed.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Simultaneously press the ON and OFF buttons for '''10''' seconds.<br />
<br />
<hr /><br />
<br />
=='''<big>SmartThings</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3300-S</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Multi Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>STSS-MULT-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button for '''6''' seconds, or until the LED light turns off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the Outlet is within '''15''' feet ('''4.5''' meters) of the hub during setup.<br />
#Hold the '''Connect''' button for '''6''' seconds, or until the LED light turns off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button for '''6''' seconds, or until the LED light turns off.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor (2015 Model)</big>'''</div><br />
|<div style="text-align: center;">'''<big>F-SS-MULT-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor (2016 Model)</big>'''</div><br />
|<div style="text-align: center;">'''<big>F-MLT-US-2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover and hold the '''Connect''' button for '''5 seconds.'''<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor v4</big>'''</div><br />
|<div style="text-align: center;">'''<big>STS-MLT-250</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Humidity Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3310-S</big>'''</div><br />
|<div style="text-align: center;">'''<big>Humidity Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove the cover, and then the battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide the sensor off the mount, remove the cover, and then the battery.<br />
#While holding down the reset button, reinsert battery<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove the cover, and then the battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Moisture Sensor</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Moisture Sensor.<br />
#Remove the CR2 battery by pulling the ribbon.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Moisture Sensor.<br />
#Remove the CR2 battery by pulling the ribbon.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Moisture Sensor.<br />
#Remove the CR2 battery by pulling the ribbon.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Sensor v4 (2015)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Water Leak Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Water Leak Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Water Leak Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the Connect button for '''6''' seconds or until the LED light turns off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the Connect button for '''6''' seconds or until the LED light turns off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the Connect button for '''6''' seconds or until the LED light turns off.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor v2 (2014)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor v3 (2015)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor v4 (2016)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Presence Sensor v2</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Presence Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Insert a small flathead screwdriver into the groove at the base of the SmartSense Presence Sensor<br />
#Gently twist the screwdriver and the plastic case should pop open.<br />
#Hold the '''Connect''' button on the sensor for about '''6''' seconds until the LED light turns off, and then release.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert a small flathead screwdriver into the groove at the base of the SmartSense Presence Sensor<br />
#Gently twist the screwdriver and the plastic case should pop open.<br />
#Hold the '''Connect''' button on the sensor for about '''6''' seconds until the LED light turns off, and then release.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Insert a small flathead screwdriver into the groove at the base of the SmartSense Presence Sensor<br />
#Gently twist the screwdriver and the plastic case should pop open.<br />
#Hold the '''Connect''' button on the sensor for about '''6''' seconds until the LED light turns off, and then release.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Arrival Sensor v4</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Presence Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release the button when the LED turns off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release the button when the LED turns off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release the button when the LED turns off.<br />
<br />
<hr /><br />
=='''<big>Sunricher</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sunricher</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall mounted controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZG2833K8_EU05</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold down the two top buttons until the LED lights up solid.<br />
#Immiediatley press the second button from the top, on the left side of the controller '''5''' times.<br />
#The LED will flash '''3''' times to indicate a sucessful reset of the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Hold down the two top buttons until the LED lights up solid.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the second button from the top, on the rightside of the controller<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold down the two top buttons until the LED lights up solid.<br />
#Immiediatley press the second button from the top, on the left side of the controller '''5''' times.<br />
#The LED will flash '''3''' times to indicate a sucessful reset of the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sunricher</big>'''</div><br />
|<div style="text-align: center;">'''<big>AC Phase-Cut Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZG9101SAC-HP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Apply power to the device to start TouchLink Commissioning. You have '''180''' seconds before timeout. Repeat the operation if you exceed the timeout period.<br />
#Bring the remote or touch panel within '''10''' cm of the device.<br />
#Set the remote or touch panel into Touch Reset procedure to reset the device, please refer to the corresponding remote or touch panel manual to learn how.<br />
#There will be an indication on the remote and a connected light will flash '''3''' times to indicate a successful reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Apply power to the device to set it into network pairing mode.<br />
#A connected light will flash twice slowly. You have '''15''' seconds before timeout. Repeat the operation if you exceed the timeout period.<br />
#A connected light will flash '''5''' times and then stay ON solid.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Perform a factory reset using the above procedure.<br />
<br />
<hr /><br />
<br />
=='''<big>Sylvania</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Contact and Temp Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>74388</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Motion and Temp Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>72923</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery for at least '''10''' seconds.<br />
#Hold down the '''Pairing/Reset''' button while inserting the battery. '''Do not release the button'''.<br />
#The light on the front of the sensor will be solid '''Red. R'''elease the '''Pairing/Reset''' button when the light goes out.<br />
#Remove the battery for at least '''10''' seconds to prepare for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Hold down the '''Pairing/Reset''' button while inserting the battery. As soon as you see the '''Red''' light on the front of the sensor, release the button.<br />
#The light on the front of the sensor will be flashing '''Blue''', indicating it is searching for a Zigbee network to join.<br />
#When the light on the front of the sensor flashes '''Green''' briefly, a network has been found and pairing with the hub will complete shortly after.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Perform a factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>73743</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold both the top and bottom button for '''3''' seconds<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold both the top and bottom button for '''3''' seconds<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold both the top and bottom button for '''3''' seconds<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ 4 Button Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>74099</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold buttons '''1''' and '''4''' together. The LED will flash Red.<br />
#Keep holding buttons '''1''' and '''4''' until the LED on the device stops flashing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold buttons '''2''' and '''3''' until the LED on the device starts flashing Yellow.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold buttons '''1''' and '''4''' together. The LED will flash Red.<br />
#Keep holding buttons '''1''' and '''4''' until the LED on the device stops flashing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>72922</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Make sure the plug is powered on. The light will be orange.<br />
#Press the button located on the front of the plug and hold it down for '''10''' seconds.<br />
#The light will flash orange when it has been reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the plug is powered on. The light will be orange.<br />
#Press the button located on the front of the plug and hold it down for '''10''' seconds.<br />
#The light will flash orange when it has been reset and is ready to be paired.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Make sure the plug is powered on. The light will be orange.<br />
#Press the button located on the front of the plug and hold it down for '''10''' seconds.<br />
#The light will flash orange when it has been reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sylvania</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the light off.<br />
#Turn the light on for '''3''' seconds.<br />
#Turn the light off.<br />
#Repeat this cycle '''5''' times.<br />
#Wait '''10''' seconds for the light to flash '''3''' times.<br />
#Repeat these steps if the light does not flash '''3''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the light off.<br />
#Turn the light on for '''3''' seconds.<br />
#Turn the light off.<br />
#Repeat this cycle '''5''' times.<br />
#Wait '''10''' seconds for the light to flash '''3''' times.<br />
#Repeat these steps if the light does not flash '''3''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the light off.<br />
#Turn the light on for '''3''' seconds.<br />
#Turn the light off.<br />
#Repeat this cycle '''5''' times.<br />
#Wait '''10''' seconds for the light to flash '''3''' times.<br />
#Repeat these steps if the light does not flash '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sylvania</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart+ BR30 bulb</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>74988</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Start with the Sylvania bulb in the ON position.<br />
#Turn the bulb OFF and ON '''8''' times in a row, pausing for '''1''' second each time you turn the bulb ON or OFF.<br />
#After the eighth time OFF, turn ON the bulb and leave it ON.<br />
#Wait about '''5''' seconds.<br />
#The BR30 bulb will flash if successfully reset.<br />
#Repeat these steps if the light does not flash.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Sylvania bulb in the ON position.<br />
#Turn the bulb OFF and ON '''8''' times in a row, pausing for '''1''' second each time you turn the bulb ON or OFF.<br />
#After the eighth time OFF, turn ON the bulb and leave it ON.<br />
#Wait about '''5''' seconds.<br />
#The BR30 bulb will flash if it entered pairing mode successfully.<br />
#Repeat these steps if the light does not flash.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Start with the Sylvania bulb in the ON position.<br />
#Turn the bulb OFF and ON '''8''' times in a row, pausing for '''1''' second each time you turn the bulb ON or OFF.<br />
#After the eighth time OFF, turn ON the bulb and leave it ON.<br />
#Wait about '''5''' seconds..<br />
#The BR30 bulb will flash if successfully reset.<br />
#Repeat these steps if the light does not flash.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Flex RGBW</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat '''5''' times - Unplug for '''1''' second and then plug in for '''1''' second.<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in.<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat '''5''' times - Unplug for '''1''' second and then plug in for '''1''' second.<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in.<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat 5 times - Unplug for '''1''' second and then plug in for '''1''' second.<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in.<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset.<br />
<br />
<hr /><br />
=='''<big>Telguard</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Telguard'''</big></div><br />
|<div style="text-align: center;">'''<big>Garage Door Control Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>GDC1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the GDC1.<br />
#Remove the cover of the enclosure.<br />
#Press the Z-Wave button once to reset the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''Z-Wave button''' once to join the GDC1 for your Z-Wave network.<br />
#If the device fails to join the Z-Wave network, unplug it for '''10''' seconds.<br />
#Repeat step 1 and again press the Z-Wave button.<br />
#Replace the cover of the enclosure.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Plug in the GDC1.<br />
#Remove the cover of the enclosure.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button once to exclude the GDC1 from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Telldus</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Telldus'''</big></div><br />
|<div style="text-align: center;">'''<big>Plug-in ON/OFF switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>TZWP-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the device.<br />
#Press and hold the button until the LED starts flashing white after approximately '''6''' seconds.<br />
#Short-press the button once more.<br />
#The device will now reset to factory defaults and the LED will flash red, indicating that it’s no longer part of the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button '''3''' times within '''1.5''' seconds to enter exclusion mode.<br />
<br />
<hr /><br />
=='''<big>Third Reality</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Third Reality'''</big></div><br />
|<div style="text-align: center;">'''<big>Reality Switch</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the button on the front of the device for approximately '''30''' seconds.<br />
#The LED will light steady for several seconds, then it will begin to flash rapidly<br />
#The device has been reset and is ready for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Light Strip powered '''ON'''.<br />
#Press the button on the front of the device for approximately '''30''' seconds.<br />
#The LED will light steady for several seconds, then it will begin to flash rapidly<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button on the front of the device for approximately '''30''' seconds.<br />
#The LED will light steady for several seconds, then it will begin to flash rapidly<br />
#The device has been reset and is ready for pairing.<br />
<br />
<hr /><br />
=='''<big>TKB</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''TKB'''</big></div><br />
|<div style="text-align: center;">'''<big>TKB Dimmer Socket</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>TZ67</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the dimmer module.<br />
#Press the '''ON/OFF''' button '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
#Within '''3''' seconds, press andhold the '''ON/OFF''' button for '''5''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''ON/OFF''' button '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''ON/OFF''' button '''3''' times within '''1.5''' seconds to enter exclusion mode.<br />
<br />
<hr /><br />
=='''<big>Utilitech</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Utilitech</big>'''</div><br />
|<div style="text-align: center;">'''<big>Indoor Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>TSE07</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press the pairing button in between the batteries '''8''' times, '''1''' second apart.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Remove the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the paring button once.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Remove the battery cover<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the paring button once.<br />
<br />
<hr /><br />
=='''<big>Vision</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Vision</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren & Strobe</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZM1601US-3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash indicating the device is reset to factory defaults and excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#The distance between the siren and the hub is suggested to be in '''1''' meter ( '''3''' feet ) or less.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after inclusion.<br />
#If the device is not included, it will continue in auto include more, attempting every '''4-6''' seconds for up to '''4''' attempts.<br />
#The LED light will flash again if the siren has not been included.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash upon successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Vision</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren & Strobe</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZM1601US-5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash indicating the device is reset to factory defaults and excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#The distance between the siren and the hub is suggested to be in '''1''' meter ( '''3''' feet ) or less.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after inclusion.<br />
#If the device is not included, it will continue in auto include more, attempting every '''4-6''' seconds for up to '''4''' attempts.<br />
#The LED light will flash again if the siren has not been included.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash upon successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Vision</big>'''</div><br />
|<div style="text-align: center;">'''<big>Shock Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZS5101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Acceleration Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Push the Tamper switch while inserting the battery & holding the Tamper switch for 5 seconds<br />
#The device will reset to the factory defaults and the LED will will remain ON solid<br />
#Remove the battery and re-inset it to complete the reset process.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after exclusion.<br />
<br />
<hr /><br />
<br />
=='''<big>Visonic</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Visonic</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>MCT-340</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press and hold down the sensor’s tamper switch.<br />
#Insert the battery into the sensor while observing battery polarity.<br />
#Release the tamper switch within '''4''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Press and release the tamper switch for '''1-2''' seconds.<br />
#The LED will flash '''3''' times, every '''5''' seconds, repeating this cycle up to '''20''' times until paired.<br />
#Test if the the sensor paired properly by moving the magnet away and toward it, observing the Hubitat Elevation™ device details status.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press and hold down the sensor’s tamper switch.<br />
#Insert the battery into the sensor while observing battery polarity.<br />
#Release the tamper switch within '''4''' seconds.<br />
<br />
<hr /><br />
=='''<big>WaterCop</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>WaterCop</big>'''</div><br />
|<div style="text-align: center;">'''<big>Emergency Water Shut-Off</big>'''</div><br />
|<div style="text-align: center;">'''<big>WAT171021</big>'''</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the Mode button once.<br />
#The status light will start flashing periodically ('''3-4''' times) indicating the device has been reset and excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Ensure that the status light is flashing periodically ('''3-4''' times).<br />
#Press the Mode button once.<br />
#The status light will stop flashing upon inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Mode button once.<br />
#The status light will start flashing periodically ('''3-4''' times) indicating the device has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Wireless</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Wireless</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWN-SD</big>'''</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Briefly press the program button on the back of the device.<br />
#The status LED will light up and then imeadiatly turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button on the back of the device.<br />
#The status LED will light up for '''5''' seconds and then turn off upon successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button on the back of the device.<br />
#The status LED will light up and then imeadiatly turn off upon successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
<br />
=='''<big>Xfinity</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Xfinity</big>'''</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>3400-X</big>'''</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove batteries from keypad.<br />
#Press and hold the wall tamper switch while reinstalling the batteries.<br />
#Once the keypad illuminates, release the wall tamper switch.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Perform a factory reset.<br />
#Remove and reinstall the batteries to being device pairing<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove batteries from keypad.<br />
#Press and hold the wall tamper switch while reinstalling the batteries.<br />
#Once the keypad illuminates, release the wall tamper switch.<br />
<br />
<hr /><br />
=='''<big>Yale</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yale</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yale Zigbee Locks</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover and batteries.<br />
#Remove the interior escutcheon to access the reset button.<br />
#The reset button is located beside the PCB cable connector.<br />
#While pressing the reset button for a minimum of '''3''' seconds, reinstall the batteries.<br />
#Release reset button and replace battery cover. '''NOTE:''' ''Upon reset, Master PIN Code creation is the only option available and must be performed prior to any other programming of the lock.''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''1''' to join the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''3''' to leave the Zigbee network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yale</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yale Z-Wave Locks</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover and batteries.<br />
#Remove the interior escutcheon to access the reset button.<br />
#The reset button is located beside the PCB cable connector.<br />
#While pressing the reset button for a minimum of '''3''' seconds, reinstall the batteries.<br />
#Release reset button and replace battery cover. '''NOTE:''' ''Upon reset, Master PIN Code creation is the only option available and must be performed prior to any other programming of the lock.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''1''' to include the lock in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''3''' to exclude the lock from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Yeelight</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yeelight</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yeelight Mono / CT bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start pulsing slowly up and down.<br />
#After '''5''' seconds, it will restart automatically, which means the bulb has been reset to factory defaults.<br />
<br />
'''Join the LAN'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Apps.'''<br />
#Choose '''Yeelight Integration''' from the list of Hubitat Elevation™ Built-In Apps<br />
#*See [[Apps]] documentation for more detail.<br />
#Using the Yeelight mobile app'','' enable '''LAN Control''' for each Yeelight prior to starting discovery. The '''LAN Control''' option can be enabled by selecting the lower right icon in the mobile app menu for each bulb.<br />
#Open the Yeelight setup and start bulb discovery.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start pulsing slowly up and down.<br />
#After '''5''' seconds, it will restart automatically, which means the bulb has been reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yeelight</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yeelight Color bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start flashing<br />
#After '''5''' seconds, it will turn white, which means the bulb has been reset to factory defaults.<br />
<br />
'''Join the LAN'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Apps.'''<br />
#Choose '''Yeelight Integration''' from the list of Hubitat Elevation™ Built-In Apps<br />
#*See [[Apps]] documentation for more detail.<br />
#Using the Yeelight mobile app'','' enable '''LAN Control''' for each Yeelight prior to starting discovery. The '''LAN Control''' option can be enabled by selecting the lower right icon in the mobile app menu for each bulb.<br />
#Open the Yeelight setup and start bulb discovery.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start flashing<br />
#After '''5''' seconds, it will turn white, which means the bulb has been reset to factory defaults.<br />
<br />
<hr /><br />
=='''<big>Zen</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zen</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN-01</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To do a full factory reset, which will delete all your configuration settings and your network connectivity, you need to remove the device from the wall and press the '''CONFIG''' button '''20''' times.<br />
#*'''NOTE''': Performing a Factory Reset will reset your ZEN's HVAC-system configuration and all of your preferences and advanced settings changes. If you do a Factory Reset, make sure that you set your configuration code and preferences back to their correct values before replacing the display on the wall.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pull the ZEN display off the wall and press the '''Network''' button on the rear of the display '''5''' times.<br />
#You should see the network icon flashing on the front of the display indicating that your ZEN thermostat is attempting to connect to a network.<br />
#The thermostat will indicate it is connected to Hubitat Elevation™ by a Network icon on the front of the device.<br />
#If the network icon is flashing, the ZEN is trying to find your network. The network icon will be solid when you are connected to your Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Pull the ZEN display off the wall and press the '''Network''' button on the rear of the display '''10''' times.<br />
#The Network icon will turn OFF when the thermostat disconnects from the Zigbee network.<br />
<br />
<hr /><br />
<br />
=='''<big>Zipato</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zipato</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PH-PSE02</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press tamper key '''4''' times within '''1.5''' seconds, but do not release the tamper key in the 4th press.<br />
#The LED will stay ON solid for '''3''' seconds and then will turn OFF.<br />
#Within '''2''' seconds of the LED turning OFF, release the tamper key. If successful, the LED will turn ON for '''1''' second.<br />
#If reset fails, the LED will flash once.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper key '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
#After successful inclusion, the LED will light up for '''1''' second.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper key '''3''' times within '''1.5''' seconds to enter exclusion mode.<br />
<br />
<hr /><br />
<br />
=='''<big>ZLINK</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZLINK</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZL-WD-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZLINK</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZL-WS-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr /><br />
=='''<big>Zooz</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN06</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug the smart plug into a grounded receptacle.<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''20''' seconds.<br />
#The LED indicator will stay solid '''yellow''' for '''2''' seconds to indicate successful reset and the plug will then automatically turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the smart plug into a grounded receptacle located within '''3''' feet from your Z-Wave radio.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly'''.<br />
#The LED indicator will flash '''blue'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
#LED indicator will flash orange.<br />
#The LED indicator will remain solid '''orange''' for a few seconds to indicate successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Power Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN15</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug the power switch into a grounded receptacle.<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''20''' seconds.<br />
#The LED indicator will flash '''orange''' and then stay solid '''orange''' for '''2''' seconds to indicate successful reset and the switch will then automatically turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the smart plug into a grounded receptacle located within '''3''' feet from your Z-Wave radio.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly'''.<br />
#The LED indicator will start flashing '''blue''', then turn '''blue''' (on) or '''pink''' (off) once included to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
#LED indicator will flash '''orange'''.<br />
#The LED indicator will start flashing '''blue''', then turn '''blue''' (on) or '''pink''' (off) once excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>MultiRelay</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN16</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the Z-Wave button '''4''' times quickly.<br />
#The LED indicator will light up, then quickly press the Z-Wave button '''4''' times again.<br />
#If theLED indicator flashes '''3''' times then turns oft, reset was successful.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button '''5''' '''times quickly''' to add the MultiRelay to your network.<br />
#The LED indicator will flash to signal communication and remain on for '''2''' seconds to confirm inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Bring your MultiRelay close to the hub and ensure is has power.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button '''3''' '''times quickly'''.<br />
#Hubitat Elevation™ will confirm exclusion and the MultiRelay will disappear from the device list.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Power Strip Ver 2.0</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN20</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Power Strip</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug the Power Strip into a grounded receptacle.<br />
#Tap the '''CH1''' button '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#All LED indicators will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the Power Strip into a grounded receptacle you’re planning to use it at (it doesn’t need to be close to the hub).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the '''CH1''' button '''3''' '''times quickly'''.<br />
#All LED indicators will start flashing.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the '''CH1''' button '''3''' '''times quickly'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN21</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly'''.<br />
#The LED indicator will flash to signal communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN22</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly'''.<br />
#The LED indicator will flash to signal communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>ON/OFF Toggle Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN23</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Toggle the switch '''down''' '''3''' times and hold on the third toggle for at least '''10''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''up''' '''3''' '''times quickly'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''down''' '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Toggle Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN24</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Toggle the switch '''down''' '''3''' times and hold on the third toggle for at least '''10''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''up''' '''3''' '''times quickly'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''down''' '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>S2 ON/OFF Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN26</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly'''.<br />
#The LED indicator will flash and will remain ON for '''2''' seconds to indicate successful communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>S2 Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN27</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly.'''<br />
#The LED indicator will flash and will remain ON for '''2''' seconds to indicate successful communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Double Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the lower paddle on the dimmer for at least '''15''' seconds until the LED indicators start flashing, then release.<br />
#Immediately press and '''hold''' the upper paddle on the dimmer for at least '''15''' seconds.<br />
#The LED indicators will flash again to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the upper paddle '''3 times quickly''' to include the device in the Z-Wave network.<br />
#The LED will flash to indicate communication with the hub and will stay on for '''2''' seconds indicate it has been successfully added to your network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Bring your Hubitat Elevation™ hub close to the RGBW Dimmer if possible.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the lower paddle '''3 times quickly to exclude it from the Z-Wave network.'''<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN31</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave button to enter reset mode.<br />
#Release the button when the LED indicator glows '''Yellow, t'''hen quickly press the Z-Wave button again to confirm factory reset.<br />
#Wait a few seconds until the device resets and restarts.<br />
#The LED indicator will light up in '''Red''' when it’s ready.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button '''3 times quickly''' to include the device in the Z-Wave network.<br />
#The LED will flash '''Yellow''' to indicate communication with the hub.<br />
#The LED will flash '''Green''' to indicate it has been successfully added to your network.<br />
#If inclusion fails, the LED will flash '''Red'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Bring your Hubitat Elevation™ hub close to the RGBW Dimmer if possible.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button on the device '''3 times quickly'''.<br />
#The LED indicator on the RGBW Dimmer will light up in '''Red''', and the device will disappear from the devices list.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE02</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Please press the Z-Wave button '''6''' TIMES quickly ('''3''' unlock-lock cycles).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Bring the motion sensor within direct reach of your Z-Wave radio.<br />
#Quickly press the Z-Wave button on the motion sensor '''2''' times (unlock and then lock).<br />
#Make sure the button is pushed in (locked) when you finish the process to re-enable motion detection.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the Z-Wave button on the motion sensor '''2''' times (unlock and then lock).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion and Light Mini Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE09</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''10''' seconds.<br />
#The LED indicator flashes '''1''' time and it may then flash '''5''' times to indicate the device is no longer part of Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Mini Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Mini Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE18</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''20''' seconds.<br />
#The LED indicator will turn on then turn on solid and will then automatically turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the '''4-5''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multisiren</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE19</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the Z-Wave button '''4''' times and hold on the fourth press for at least '''5''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''4-5''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>S2 Outdoor Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE29</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch '''4''' times and hold on the fourth press for at least '''5''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the tamper switch '''4-5''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the tamper switch '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''10''' seconds until the LED indicator flashes '''1''' time.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Chime</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE33</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Doorbell</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''10''' seconds until the LED indicator flashes '''1''' time.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>4 in 1 Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE40</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#OPEN the back cover to trigger tamper switch.<br />
#Press and release the Z-Wave button using a paperclip '''10''' times quickly (within '''10''' seconds).<br />
#The sensor will start flashing immediately and will again flash '''5''' times after the '''10''' clicks (color depends on room temperature, it’s usually blue or yellow).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''2''' times with a paperclip.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''2''' times with a paperclip.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Valve</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZAC03</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the '''RED''' power button for at least 1'''0''' seconds until the LED indicator flashes '''1''' time.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Connect the valve to power.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the '''RED''' power button on the valve control '''3''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the '''RED''' power button on the valve control '''3''' times.<br />
<br />
<hr /><br />
=='''<big>ZWP</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZWP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZWP WD-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZWP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZWP WS-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr />'''*Note: Aeotec was formerly known as Aeon Labs.'''<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Join_and_Reset_Instructions&diff=5184Join and Reset Instructions2021-07-26T15:58:10Z<p>Doug: </p>
<hr />
<div>{{Top}}<br />
<br />
<big>Before you can join your devices to your Hubitat Elevation hub, you must first remove them from the previous hub or bridge. While Zigbee devices can simply be removed and put into Paring Mode using the manufacturer's instructions, Z-Wave™ devices must be Excluded from their previous network before joining a new one. Exclusion will happen automatically when the device is removed from Hubitat Elevation, however it is recommend that Z-Wave devices always be factory reset as well. If a device cannot be factory reset, or is in an unknown state, then it is recommended to do a General Exclusion in your Hubitat Elevation hub to be sure it isn't joined to the former Z-Wave mesh. Typically the same button on the device for inclusion is also used for exclusion. If Hubitat Elevation doesn't show Unknown Device Excluded in the log, then the General Exclusion has failed and the device probably won't be able to be joined. See [[How to Build a Solid Z-Wave Mesh]] for further detail on methods of Exclusion.</big><br />
<br />
=='''<big>ADT</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ADT (Nortek)</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>10016864C</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover by rotating it counterclockwise<br />
#Press and hold the Connect button for '''5''' seconds<br />
#After the button is released, the LED will flash quickly for a few seconds, go dark for a few seconds, then flash slowly to indicate it is in pairing mode.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the cover by rotating it counterclockwise<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the Connect button for '''5''' seconds<br />
#After the button is released, the LED will flash quickly for a few seconds, go dark for a few seconds, then flash slowly to indicate it is in pairing mode<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
=='''<big>AduroSmart</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>AduroSmart</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ERIA 81822</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use the provided pin to press and hold the reset button for 10 seconds.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Use the provided pin to press and hold the reset button for '''10''' seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>AduroSmart</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>ERIA 81825</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold down the two middle buttons until the light flashes green. A red flash indicates an unsuccessful reset.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold down the off (circle) button for '''10''' seconds until it flashes green '''3''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>AduroSmart</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ERIA 81823</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use the provided pin to press and hold the reset button for '''10''' seconds.<br />
#*Battery powered Zigbee devices often pair easier when their batteries are removed for '''10''' seconds following a factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Use the provided pin to press and hold the reset button for '''10''' seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
=='''<big>Aeotec (Aeon Labs)</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW056</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Doorbell will now be reset to its original settings, and the Network LED will be solid for '''2''' seconds and then start slow flashing as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Doorbell Gen5, and its LED will flash rapidly to indicate that it is communicating.<br />
#If your Doorbell has been successfully linked to your network, its LED will become solid for '''2''' seconds, then stop. If linking was unsuccessful, the LED will flash when you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Doorbell.<br />
#If your Doorbell has been successfully unlinked to your network, its LED will begin to flash slowly indicating it is ready to be paired to a new network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW162-A</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds<br />
#Within '''2-5''' seconds, the test doobell sound will run, then stop after '''5''' seconds has elapsed.<br />
#From '''5-10''' seconds, the LED will begin to flash faster and faster still from '''10-20''' seconds.<br />
#After '''21''' seconds, the LED will quickly flash '''3''' times, and then the LED slowly pulse up and down as you hold down the Action Button.<br />
#With the LED pulsing, release the Action button, and the Doorbell 6 will be reset to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power Doorbell 6 through the provided power adapter.<br />
#Ensure that Doorbell 6 LED is flashing slowly.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the Doorbell 6 Action Button once.<br />
#If Doorbell 6 has successfully paired to your Z-Wave gateway, the LED will be a solid color for '''30''' seconds, then turn off.<br />
#If is fails to join the Z-Wave network, the LED will flash slowly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button '''6''' times in '''2''' seconds.<br />
#If your Doorbell 6 has been successfully unpaired from the Z-Wave network, its LED will begin to flash slowly, indicating it is ready to join a Z-Wave network again.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW112</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold Door Window Sensor 6 Action button<br />
#Wait until the RGB LED turns into a Green Color, and then release. (LED will change from Yellow, Purple, Red, then to Green)<br />
#If your MultiSensor has been successfully factory reset from its previous network, the RGB LED will be active with a colorful gradient for '''3''' seconds. When you press the Action Button on MultiSensor, its green LED will flash. If the removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the button on the Door Window Sensor 6<br />
#The LED will flash green to indicate successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your Door Window Sensor is successfully removed from the Z-Wave network, the RGB LED will become a colorful gradient for a few seconds and then turn off. If the removing was unsuccessful, the RGB LED will be solid for 8 seconds and then turn off, repeat the above steps.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW120</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and Status LED will be solid for '''2''' seconds to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once to include the door/window sensor.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your Door Window Sensor has been successfully removed from your Z-Wave network, its Status LED will fast flash for '''8''' seconds and then slow flash for '''3''' seconds when you press the Action Button again.<br />
#If the removal was unsuccessful, the Status LED will fast flash for '''2''' seconds and then be solid for '''2''' seconds when you press the Action Button, repeat the above steps.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor Gen2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSB29</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and Status LED will be solid for '''2''' seconds to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once to include the door/window sensor.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor to exclude it from the network<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor 1E</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSB04100</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the sensor to a default state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the security tamper switch located at the back of the Aeon Labs Door/Window Sensor to include it in the network<br />
#The sensor will now stay awake for '''10''' minutes to receive network instructions. The LED on the will be flashing while awake.<br />
#*Note: The DSB04100 sensor can only be taught to communicate to devices within its own network.<br />
#*If the Aeon Labs Door / Window Sensor was not included in a Z-Wave network, pressing the security switch will illuminate the LED solid red on the front of the sensor for '''5''' seconds.<br />
#*If the sensor was successfully included in the Z-Wave network, the LED will flash instead of staying solid.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Use an Aeon Z-Stick or Minimote to exclude the sensor from previous networks<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Controller Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW062</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and release.<br />
#Your Garage Door Controller will now be reset to its original settings, and the Network LED will be solid for '''2''' seconds and then start slow flashing to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on the Garage Door Controller.<br />
#The LED on Garage Door Controller will flash rapidly, followed by a solid LED for '''1-2''' second for a successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave Button on the Garage Door Controller.<br />
#The LED on Garage Door Controller will flash rapidly, followed by a solid LED for '''1-2''' second for a successful exclusion.<br />
#The Network LED on the Garage Door Controller should now be flashing slowly to indicate it is ready to be paired to a new network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dry Contact Sensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW097</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and Status LED will be solid for '''2''' seconds to confirm a success.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your Sensor has been successfully linked to your network, its LED will become solid for '''2''' seconds, then disappear.<br />
#If linking was unsuccessful, the LED will continue to flash if you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor.<br />
#If your switch has been successfully unlinked to your network, its LED will begin to flash for a short time.<br />
#If unlinking was not successful, the LED will return to its last state. Tap the button to confirm if it has been unpaired, if unpaired successfully, the LED will flash when tapped.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Aeon Labs Home Energy Meter</big>'''</div><br />
|<div style="text-align: center;">'''<big>AEDSB09104ZWUS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Energy Meter</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''10''' seconds.<br />
#If successful, the LED on the HEM should begin to flash slowly.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Remove the screw from the back of your Reader and open the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button (small black button under the battery tray) on your reader. If your Reader has been successfully linked to your network, its light will remain solid for '''1''' second. If the linking was unsuccessful the light will flash after pressing your meter’s Action Button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the screw from the back of your Reader and open the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button (small black button under the battery tray) on your reader. If your Reader has been successfully removed from your network, its light will flash for '''1''' second.<br />
#If the removal was unsuccessful the light will be solid after pressing your meter’s Action Button.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Home Energy Meter Gen2 / Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW095</big>'''</div><br />
|<div style="text-align: center;">'''<big>Energy Meter</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''10''' seconds.<br />
#If successful, the LED on the HEM should begin to flash slowly.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the Action Button on your HEM. If it has been successfully linked to your network, its LED will remain illuminated. If the linking was unsuccessful, your HEM’s LED will continue to flash.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your HEM. If it has been successfully removed from your network, its LED will flash. If the removal was unsuccessful, its LED will be solid and it will be then repeated again.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>LED Bulb Gen5</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW098</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Removing LED Bulb from your Z-Wave network will reset LED Bulb to default factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#With LED Bulb in its fitting, wait '''2''' seconds. Now toggle your wall switch ON. LED Bulb’s green LED will flash to indicate that it is looking for a Z-Wave network to connect to.<br />
#After successfully connecting to your network, LED Bulb will illuminate. If a network connection has failed, it will remain without light.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Turn LED Bulb’s wall switch on.<br />
#Toggle LED Bulb’s wall switch off, on, off, on, off, on within '''2''' seconds. The LED should flash orange, and if successful, the orange LED will be solid for '''2''' seconds before becoming a white color. LED Bulb should now be removed from your Z-Wave network.<br />
#To confirm successful removal its color will change to orange for '''2''' seconds before changing to white. If removal was unsuccessful, LED Bulb will flash orange for '''3''' seconds before changing to red for '''2''' seconds.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>LED Bulb 6 Multi-Color</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn LED Bulb’s wall switch on and wait '''1''' second.<br />
#Toggle LED Bulb's wall switch '''6''' times ('''off -> on, off -> on, off -> on, off -> on, off -> on, off -> on''') between '''0.5 - 2''' seconds per re-power.<br />
#If successful, the LED Bulb 6 Multi-Color will change to a warm white, solid yellow, then flash red -> white '''3''' times to indicate a successful factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#With LED Bulb in its fitting, toggle your wall switch ON. LED Bulb’s LED will turn into a solid yellow color to indicate that it is in pair mode up to '''10''' seconds.<br />
#After successfully connecting to your network, LED Bulb will flash green -> white color for '''3''' seconds. If a network connection has failed, LED Bulb 6 Multi-Color will flash red -> white for '''3''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle LED Bulb’s wall switch '''3''' times ('''off > on''', '''off > on''', '''off > on''') between '''0.5 - 2''' seconds per cycle.<br />
#LED Bulb 6 has been unpaired successfully, the LED will flash blue > white for '''3''' seconds.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>LED Bulb 6 Multi-White</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn LED Bulb’s wall switch on and wait '''1''' second.<br />
#Toggle LED Bulb's wall switch 6 times ('''off -> on, off -> on, off -> on, off -> on, off -> on, off -> on''') between '''0.5 - 2''' seconds per re-power.<br />
#If successful, the LED Bulb 6 Multi-White will flash twice to indicate that it successfully reset itself to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#With LED Bulb in its fitting, toggle your wall switch ON. LED Bulb’s LED will flash '''2''' times to indicate that it is looking for a Z-Wave network to connect to.<br />
#After successfully connecting to your network, LED Bulb will flash off then on in about '''0.5''' second to indicate that it attempted to pair to your network. If a network connection has failed, LED Bulb 6 Multi-White will not react.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Turn LED Bulb’s wall switch on and wait '''1''' second.<br />
#Toggle LED Bulb’s wall switch 3 times ('''off > on''', '''off > on''', '''off > on''') between '''0.5 - 2''' seconds per cycle.<br />
#LED Bulb 6 if successful will flash once, dim to 5% for '''5''' seconds, then increase to 100% dim level to indicate a successful unpair and factory reset.<br />
<br />
----<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro Illuminator G2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC19103-ZWUS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the Z-Wave button for '''30''' seconds and release it to reset the entire module including Z‐Wave to factory default settings (the LED will stay solid after holding the button for '''30''' seconds).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Connect Micro Smart Dimmer to an AC‐input power source.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z‐Wave button.<br />
#If the inclusion fails, please repeat the process from step 2.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z‐Wave button.<br />
#If the exclusion fails, please repeat the process from step 2<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro Motor Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC14104-ZWEU/US, DSC14103-ZWAU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motor Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the controller to a default state.<br />
<br />
'''Join the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#Connect Micro Motor Controller to an AC‐input power source.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If Micro Motor Controller has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press the Action Button on the Z-Stick to take it out of installation mode.<br />
<br />
'''Join the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#Connect Micro Motor Controller to an AC‐input power source.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions<br />
#Press the Include button on your Minimote.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If the Micro Motor Controller has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press any button on your Minimote to take it out of inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If your Micro Motor Controller has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press the Action Button on the Z-Stick to take it out of removal mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Remove Button on your Minimote.<br />
#Press the Action Button on your Micro Motor Controller.<br />
#If your Micro Motor Controller has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press any button on your Minimote to take it out of removal mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dual Micro Switch G2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DCS17</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button on the Micro Double Smart Energy Switch G2 for '''20''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the Micro Double Smart Energy Switch G2 is installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch 6 times (ON to OFF or OFF to ON).<br />
#If the Micro Double Smart Energy Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If the Micro Double Smart Energy Switch G iis installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch '''6''' times (ON to OFF or OFF to ON).<br />
#If the Micro Double Smart Energy Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro Switch G2</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC26 / DCS18</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button on the Micro Switch G2 for '''20''' seconds and then release it.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the Micro Switch G2 is installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch 6 times (ON to OFF or OFF to ON).<br />
#If the Micro Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If the Micro Switch G2 is installed for use with a light, the switch can be toggled to initiate pairing into the Z-Wave network (switch '''6''' times (ON to OFF or OFF to ON).<br />
#If the Micro Switch G2 is uninstalled, the internal button can be pushed to initiate pairing into the Z-Wave network, but '''only if Micro is not already connected to an external switch'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Minimote</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSA03202</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Pull down the panel on the Minimote<br />
#Press and hold the bottom '''2''' buttons down. The Red and Blue LED will alternate faster and faster.<br />
#When both Red and Blue LED become solid, you may let go.<br />
<br />
'''Include a device''' '''from the Z-Wave Network'''<br />
<br />
#Tap the Inclusion (+) button, LED should be flashing blue<br />
#Tap the button on the device you want to add<br />
#After the LED stops flashing rapidly, tap any button to get out of inclusion mode<br />
<br />
'''Exclusion a device from the Z-Wave Network'''<br />
<br />
#Tap the Exclusion (-) button, LED should flash red<br />
#Tap button on the device you want to remove<br />
#After LED stops flashing rapidly, tap any button to get out of the exclusion mode<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multisensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW074</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold Multisensor Gen5 Action button (For '''20''' seconds)<br />
#The LED of the Multisensor Gen5 will flash faster and faster. At '''20''' seconds, the LED should become solid for '''1-2''' seconds to confirm factory reset.<br />
#Release the Multisensor Gen5 Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on your MultiSensor.<br />
#You can test if your MultiSensor has been successfully synced with your Z-Wave network by pressing its Z-Wave Button. If you press the button and your sensor’s LED illuminates for a few seconds, then syncing has been successful.<br />
#If the LED flashes when the button is pressed, the syncing has been unsuccessful and you should repeat the above steps.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave Button on your MultiSensor.<br />
#If your MultiSensor has been successfully removed from your network, its LED will flash when you press the Z-wave Button.<br />
#If the removal was unsuccessful, the LED will stay solid for a few seconds when you press the Z-wave Button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multisensor 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW100</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the Action Button on your MultiSensor. The LED on Multisensor will flash red then change into a colorful gradient.<br />
#If your MultiSensor has been successfully removed from your network, the RGB LED will be active with a colorful gradient for '''3''' seconds. When you press the Action Button on MultiSensor, its green LED will flash.<br />
#If the removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your MultiSensor. The LED on Multisensor will flash Green rapidly, followed by a solid Green LED for '''1''' second for a successful inclusion, or a solid red LED for '''1''' second for a failed inclusion.<br />
#You can test if your MultiSensor has been successfully included into your Z-Wave network by pressing its Action Button. If you press the button and your sensor's green LED is solid for a few seconds, then inclusion has been successful.<br />
#If the green LED flashes when the button is pressed, the inclusion has been unsuccessful and you should repeat the steps from step 1.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your MultiSensor. The LED on Multisensor will flash red then change into a colorful gradient.<br />
#If your MultiSensor has been successfully removed from your network, the RGB LED will be active with a colorful gradient for '''3''' seconds. When you press the Action Button on MultiSensor, its green LED will flash.<br />
#If the removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>NanoMote One</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA004</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the NanoMote button for '''20''' seconds.<br />
#The LED will change from: Orange > Green > Red > Pink > Red<br />
#Release the button on the second Red LED status. It will remain Red for '''2''' seconds<br />
#Tap button again while second Red LED is illuminated (you'll have '''2''' seconds to do so).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Double click the NanoMote button, the LED will flash rapidly with a white color.<br />
#If your NanoMote has been successfully added to your Z-Wave network, its white LED will be solid for about '''10''' seconds, then flash green to indicate it is awake.<br />
#If the adding was unsuccessful and the red LED will be solid for '''2''' seconds and then off, repeat the above steps.<br />
#*If your NanoMote does not go to sleep on its own, press and hold for '''2''' seconds (or until LED turns orange) then release its button to put your NanoMote to sleep.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Double click the NanoMote button, the LED will become a solid green color.<br />
#If your NanoMote has been removed from your Z-Wave network, its LED will begin cycling through a rainbow of colors.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>NanoMote Quad</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the NanoMote button for '''20''' seconds.<br />
#The LED will change from: Orange > Green > Red > Pink > Red<br />
#Release the button on the second Red LED status. It will remain Red for '''2''' seconds<br />
#Tap button again while second Red LED is illuminated (you'll have '''2''' seconds to do so).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Double click the NanoMote button (can be any button), the LED will flash rapidly with a white color.<br />
#If your NanoMote has been successfully added to your Z-Wave network, its white LED will be solid for about '''10''' seconds, then flash green to indicate it is awake.<br />
#If the adding was unsuccessful and the red LED will be solid for '''2''' seconds and then off, repeat the above steps.<br />
#*If your NanoMote does not go to sleep on its own, press and hold for '''2''' seconds (or until LED turns orange) then release its button to put your NanoMote to sleep.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Double click the NanoMote button, the LED will become a solid green color.<br />
#If your NanoMote has been removed from your Z-Wave network, its LED will begin cycling through a rainbow of colors.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Nano Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW111</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on the Nano Dimmer, the '''Green''' LED (basic secure indication) will flash to indicate the Nano Dimmer is entering into pairing mode.<br />
#If the Nano Dimmer has been successfully added to your Z-Wave network, its RGB LED will be solid.<br />
#If the pairing was unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then remain a colorful gradient, repeat the steps above.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Nano Switch (with energy reading)</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW116</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on the Nano Switch.<br />
#If inclusion is successful, the '''Green''' LED will be on for '''2''' seconds, and then return to a solid indication. If inclusion is unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then return to a colorful gradient.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dual Nano Switch (with energy reading)</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW132</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on the Dual Nano Switch.<br />
#If inclusion is successful, the '''Green''' LED will be on for '''2''' seconds, and then return to a solid indication. If inclusion is unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then return to a colorful gradient.<br />
<br />
'''Exclusion from the Z-Wave Network''';<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Nano Switch (without energy reading)</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZW139</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it.<br />
#Your Nano Switch will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on the Nano Switch.<br />
#If inclusion is successful, the '''Green''' LED will be on for '''2''' seconds, and then return to a solid indication. If inclusion is unsuccessful, the '''Red''' LED will be on for '''2''' seconds and then return to a colorful gradient.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on the Nano Switch once or toggle the external manual switch '''3''' times in fast succession.<br />
#If the Nano Switch has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender (Aeon Labs Z-Wave Network Repeater)</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSD37</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the Range Extender to a default state.<br />
<br />
'''Join the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#If Range Extender has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press the Action Button on the Z-Stick to take it out of installation mode.<br />
<br />
'''Join the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions<br />
#Press the Include button on your Minimote.<br />
#If the Range Extender has been successfully linked to your Z-Wave network, its Network LED will no longer flash.<br />
#If the linking was unsuccessful and the Network LED continues to flash repeat the above steps.<br />
#Press any button on your Minimote to take it out of inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Z-Stick)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Z-Stick.<br />
#If your Range Extender has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press the Action Button on the Z-Stick to take it out of removal mode.<br />
<br />
'''Exclusion from the Z-Wave Network''' '''(Minimote)'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Remove Button on your Minimote.<br />
#If your Range Extender has been successfully removed from your network, its Network LED will flash.<br />
#If the removal was unsuccessful, the Network LED will not flash.<br />
#Press any button on your Minimote to take it out of removal mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW117</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave Button for '''20''' seconds to completely factory reset your Range Extender 6.<br />
#During the time that you are holding your Range Extender 6 action button down, the LED will flash through these colors: Yellow (at '''2''' seconds) > Purple (at '''5''' seconds) > Red for '''8''' seconds (initializing factory reset) > Green for '''20''' seconds (factory reset complete) > Rainbow LED (ready to be paired to a new gateway).<br />
#You may let go when the LED turns green. Your Range Extender will now be reset to its original settings, and the green LED will be solid for '''2''' seconds and then remain the colorful gradient status as a confirmation.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on your Range Extender and quickly release the button (should only be a quick tap action on the button) and its LED will flash green rapidly (green indicates insecure pairing, if you want to pair securely, please refer to Enabling Security Encryption section in the Advanced Function section).<br />
#If Range Extender has been successfully added to your Z-Wave network, its LED will be solid for '''2''' seconds then turn off. If the adding was unsuccessful, the red LED will be on for '''2''' seconds and then remain colorful gradient status, repeat the steps above.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave Button on your Range Extender.<br />
#If Range Extender has been successfully removed from your network, its RGB LED will remain colorful gradient status.<br />
#If the removal was unsuccessful, the RGB LED will still be solid, repeat the steps above.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender 7</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW189</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave Button for '''20''' seconds to completely factory reset your Range Extender 7.<br />
#During the time that you are holding your Range Extender 7 action button down, the LED will cycle through these stages: OFF (at '''1''' second) > Pulsing (at '''2''' seconds) > Flash (at '''5''' seconds) > Fast Flashing (at '''10''' seconds) > '''Solid for 2''' '''seconds''' then pulsing (at '''20''' seconds) indicating factory reset complete.<br />
#You may let go of the button. Your Range Extender has now be reset to its original settings, and the LED will continuously pulse until added again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave Button on your Range Extender 7 and quickly release the button (should only be a quick tap of the action button).<br />
#The Range Extender 7 will quickly flash its '''White''' LED up to '''30 seconds''', or until it is paired successfully.<br />
#If successfully paired, the LED light will become brighter. If pairing fails, the LED will return to slow pulsing.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button on your Range Extender 7.<br />
#If Range Extender has been successfully removed from your network, its LED will be slowly pulsing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Recessed Door Sensor Gen5</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW089</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds and then release it. Your sensor will now be reset to its original settings<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Sensor. If your Sensor has been successfully linked to your network, its LED will become solid for '''2''' seconds then disappear.<br />
#If linking was unsuccessful, the LED will continue to flash if you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Sensor. If your switch has been successfully unlinked to your network, its LED will begin to flash for a short time.<br />
#If linking was unsuccessful, the LED will return to its last state. Tap the button to confirm if it has been unpaired, if unpaired successfully, the LED will flash when tapped.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW080</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds<br />
#At 8 seconds, the Siren will sound for '''1''' second, then stop<br />
#The LED will continue to flash faster and faster and then will then turn solid for '''2''' seconds to indicate a successful factory reset<br />
#You may let go of its Action button, and the Siren Gen5 factory reset is complete.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Siren Gen5, and its LED will flash rapidly to indicate that it is communicating.<br />
#If your Siren has been successfully linked to your network, its LED will become solid for '''2''' seconds, then stop.<br />
#If linking was unsuccessful, the LED will flash when you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Siren.<br />
#If your Siren has been successfully unlinked from your network, its LED will begin to flash.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW164-A</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds<br />
#Within '''2-5''' seconds, the test siren sound will run, then stop after '''5''' seconds has elapsed.<br />
#From '''5-10''' seconds, the LED will begin to flash faster and faster still from '''10-20''' seconds.<br />
#After '''21''' seconds, the LED will quickly flash '''3''' times, and then the LED slowly pulse up and down as you hold down the Action Button.<br />
#With the LED pulsing, release the Action button, and the Siren 6 will be reset to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power Siren 6 through the provided power adapter.<br />
#Ensure that Siren 6 LED is flashing slowly.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly tap the Siren 6 Action Button once.<br />
#If Siren 6 has successfully joined your Z-Wave network, the LED will emit a solid color for '''30''' seconds, then turn off.<br />
#If the Siren 6 failed to pair, the LED will continue to flash slowly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button '''6''' times within '''2''' seconds .<br />
#If your Siren 6 has been successfully excluded from the Z-Wave network, its LED will begin to flash slowly which indicates that it is ready to be paired again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Energy Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DSC06106</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Use an Aeon Z-Stick or Minimote to return the sensor to a default state. If the Smart Energy Switch was removed from the Z-Wave network, the LED will be flashing. If it was not successfully removed from the Z-Wave network, the LED will either be solid '''ON''' or '''OFF''' (depending on if the switch is on or off).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the device to include it in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Use an Aeon Z-Stick or Minimote to exclude the sensor from previous networks. If the Smart Energy Switch was removed from the Z-Wave network, the LED will be flashing. If it was not successfully removed from the Z-Wave network, the LED will either be solid '''ON''' or '''OFF''' (depending on if the switch is on or off).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch 6</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW096 / ZW110</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''20''' seconds.<br />
#The LED will change between these colors: Yellow > Purple > Red (flashs faster and faster) > Green (Successful indication of factory reset) > Rainbow LED (waiting to pair to new network).<br />
#When the LED changes to Green state, you may let go of the action button.<br />
#When the LED changes to a rainbow LED state, it will indicate that it is ready to pair to a new network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your Switch once and the LED will flash a green LED.<br />
#If your switch has been successfully linked to your network, its LED will become solid green for '''2''' seconds.<br />
#If linking was unsuccessful, the LED will return to a rainbow gradient.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your Switch.<br />
#If your switch has been successfully unlinked from your network, its LED will become a rainbow gradient.<br />
#If linking was unsuccessful, the LED will become green or purple depending on how your LED mode is set.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>TriSensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWA005</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action Button for '''15''' seconds.<br />
#The red LED flashes to confirm a successful factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button on your sensor once.<br />
#The LED will turn yellow LED for '''10''' seconds.<br />
#If the LED flashes green twice, then the sensor has successfully joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your sensor.<br />
#The LED will turn purple for '''2''' seconds, and then white when exclusion is successful.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>WallMote Quad</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW129</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds.<br />
#The LED should flash between green, purple, then red which will flash rapidly until a green LED becomes solid for '''2''' seconds to indicate a successful factory reset.<br />
#Let go of the Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on WallMote Quad to include it.<br />
#The green LED will be on for '''2''' seconds and then the orange LED will fast flash for '''10''' minutes (if the WallMote Quad does not receive the Wake Up No More Info command from primary Controller) to indicate the inclusion is successful.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your WallMote Quad.<br />
#If your WallMote Quad is successfully removed from the Z-Wave network, the LED will become a colorful gradient for a few seconds and then turn off.<br />
#If the removal was unsuccessful, the red LED will be solid for '''2''' seconds and then turn off, repeat the above steps.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aeotec*</big>'''</div><br />
|<div style="text-align: center;">'''<big>WallMote Quad</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW130</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Action button for '''20''' seconds.<br />
#The LED should flash between green, purple, then red which will flash rapidly until a green LED becomes solid for '''2''' seconds to indicate a successful factory reset.<br />
#Let go of the Action Button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Action Button once on WallMote Quad to include it.<br />
#The green LED will be on for '''2''' seconds and then the orange LED will fast flash for '''10''' minutes (if the WallMote Quad does not receive the Wake Up No More Info command from primary Controller) to indicate the inclusion is successful.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Action Button on your WallMote Quad.<br />
#If your WallMote Quad is successfully removed from the Z-Wave network, the LED will become a colorful gradient for a few seconds and then turn off.<br />
#If the removal was unsuccessful, the red LED will be solid for '''2''' seconds and then turn off, repeat the above steps.<br />
<br />
<hr /><br />
<br />
=='''<big>Alfred</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Alfred</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>DB2 / DB2-B</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the door and keep the lock bolt in the unlock position.<br />
#Open the battery box to access the reset button.<br />
#Using a pointed object, press and hold the reset button.<br />
#Keep the reset button held down while removing and replacing one of the batteries.<br />
#Keep holding the reset button down until you hear the voice guidance.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Touch the lock screen with your hand to activate it.<br />
#Press * twice, followed by your master PIN code and #<br />
#Digits 1-8 on the keypad should lightup in response.<br />
#Enter '''8''', followed by '''1''' to put the lock into inclusion mode.<br />
#*'''NOTE:''' It is recommended that you delete all user codes from the lock if any are previously existing and use Hubitat Elevation™ Lock Code Manager to program the lock.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#You must have your lock first connected to the August App<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Touch the lock screen with your hand to activate it.<br />
#Press * twice, followed by your master PIN code and #<br />
#Digits 1-8 on the keypad should lightup in response.<br />
#Enter '''8''', followed by '''2''' to put the lock into exclusion mode.<br />
<br />
<hr /><br />
<br />
=='''<big>August</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>August</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Lock Pro</big>'''</div><br />
|<div style="text-align: center;">'''<big>ASL-03</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#You must have your lock first connected to the August App<br />
#Go into Lock Settings > Z-Wave Settings. If you are connected, you will see Remove Z-Wave Device. Select Remove Z-Wave Device and on the next page you will see two options:<br />
#*My Hub is in Exclusion Mode - use this mode when you have working hub and can properly disconnect.<br />
#*My Hub is No Longer Working - use this mode to RESET the Device.<br />
#Select the '''My Hub is No Longer Working''' option and then select '''Reset Z-Wave Device'''.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#You must have your lock first connected to the August App<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the August App, go into Lock Settings and door for Z-Wave Settings.<br />
#The first time the screen will state that "The Lock is not connected to a Z-Wave Network". Select "Add to a Z-Wave Network".<br />
#Follow the instructions to put the lock into Learn Mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#You must have your lock first connected to the August App<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Go into Lock Settings > Z-Wave Settings. If you are connected, you will see Remove Z-Wave Device.<br />
#Select Remove Z-Wave Device and on the next page you will see two options.<br />
#*My Hub is in Exclusion Mode - Use this mode when you have a working hub and can properly disconnect.<br />
#*My Hub is No Longer Working - Use this mode to RESET the Device.<br />
#Select the My Hub is in Exclusion Mode option to exclude the lock from the Z-Wave network.<br />
<br />
<hr /><br />
<br />
=='''<big>Aurora</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aurora</big>'''</div><br />
|<div style="text-align: center;">'''<big>AOne Smart Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>AU-A1ZBRC</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press and hold the pairing button for '''3''' seconds before releasing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the pairing button for '''3''' seconds before releasing. The light on the front of the remote will flash periodically to confirm it is searching for the hub.<br />
#The light on the remote will remain solid for '''10''' seconds to confirm pairing was successful.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press and hold the pairing button for '''3''' seconds before releasing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aurora</big>'''</div><br />
|<div style="text-align: center;">'''<big>AOne Smart Plug-In Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>AU-A1ZBPIAB</big>'''</div><br />
|<div style="text-align: center;">'''<big>Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Plug in the socket.<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the pairing button for '''6''' seconds before releasing. The light on the device will begin flashing.<br />
#The light on the smart socket will stop flashing when pairing is sucessful.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Aurora</big>'''</div><br />
|<div style="text-align: center;">'''<big>AOne Smart Double Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>AU-A1ZBDSS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Socket</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
#Cycle mains power to the outlet.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#On initial power up, the device will automatically enter pairing mode for '''3''' '''minutes'''.<br />
#Pairing is indicated by the LED light around the button flashing '''Blue''' quickly.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the pairing button for '''6''' seconds before releasing.<br />
#Cycle mains power to the outlet.<br />
<br />
<hr /><br />
<br />
=='''<big>BeSense</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BeSense</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zwave PLUS Ceiling PIR Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>IX32</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch for '''6''' times to restore factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Activate the inclusion mode at the sensor by pressing the tamper switch '''3''' times.<br />
#Wait about '''15-30''' seconds while the sensor and hub finish the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper switch '''3''' times and the sensor will be removed from the Z-Wave network after '''15-30''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BeSense</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zwave Plus Window/Door Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM20</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch for '''6''' times to restore factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Activate the inclusion mode at the sensor by pressing the tamper switch '''3''' times.<br />
#Wait about '''15-30''' seconds while the sensor and hub finish the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper switch '''3''' times and the sensor will be removed from the Z-Wave network after '''15-30''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BeSense</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zwave PIR Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>IX30</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press the tamper switch for '''6''' times to restore factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Activate the inclusion mode at the sensor by pressing the tamper switch '''3''' times.<br />
#Wait about '''15-30''' seconds while the sensor and hub finish the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface, go to the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper switch '''3''' times and the sensor will be removed from the Z-Wave network after '''15-30''' seconds.<br />
<br />
<hr /><br />
<br />
=='''<big>BOSCH</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BOSCH</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ISW-ZPR1-WP13</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#Press upward on the tamper switch located in-between the batteries, keeping it engaged while you '''remove both batteries'''.<br />
#Wait at least '''4''' seconds, but do not release the tamper switch.<br />
#Keep the tamper switch engaged while you reinsert both batteries.<br />
#Release the tamper switch. The device is now reset to factory default settings.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Pairing''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#Remove both batteries for at least '''10''' seconds.<br />
#Reinsert both batteries. The LED on the front of the sensor will be solid for '''2''' seconds<br />
#The LED will begin to flash '''On''' > '''Off''' > '''On''' > '''Off''' > '''On''' > '''Off''' (for '''5''' seconds) and will continue to flash in this cycle for up to '''3''' minutes<br />
#If the motion sensor does not pair with the hub in less than '''3''' minutes, perform a factory reset and repeat the above steps to join the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>BOSCH</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ISW-ZDL1-WP11G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#Press upward on the tamper switch located in-between the batteries, keeping it engaged while you '''remove both batteries'''.<br />
#Wait at least '''4''' seconds, but do not release the tamper switch.<br />
#Keep the tamper switch engaged while you reinsert both batteries.<br />
#Release the tamper switch. The device is now reset to factory default settings.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Unlock the battery cover and slide it upwards to remove.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Pairing''' on the '''Device Discovery''' page.<br />
#*See Discovering your devices for detail instructions.<br />
#Remove both batteries for at least '''10''' seconds.<br />
#Reinsert both batteries. The LED on the front of the sensor will be solid for '''2''' seconds<br />
#The LED will begin to flash '''On''' > '''Off''' > '''On''' > '''Off''' > '''On''' > '''Off''' (for '''5''' seconds) and will continue to flash in this cycle for up to '''3''' minutes<br />
#If the motion sensor does not pair with the hub in less than '''3''' minutes, perform a factory reset and repeat the above steps to join the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<hr /><br />
<br />
=='''<big>Centralite</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>Pearl Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>3000-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Enter Programming Mode, navigate to Menu ID “17”, press HOLD, then navigate to option “11”, then press HOLD again.<br />
#The device will then factory reset itself and begin looking for an open network to join.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter Programming Mode, navigate to Menu ID “17”, press HOLD, then navigate to option “11”, then press HOLD again.<br />
#The device will then factory reset itself and begin looking for an open network to join.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Smart Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>3200-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Door & Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3300-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3305-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Micro Door Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3323-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>3-Series Micro Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3328-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Centralite</big>'''</div><br />
|<div style="text-align: center;">'''<big>4-Series Smart Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>4200-C</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
#After the Smart Outlet has successfully joined a ZigBee network, the status LED will turn solid green<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Unplug any devices from the module and unplug from the wall.<br />
#Hold the on/off button while plugging it back into the wall and continue to hold the button until the status LED turns on.<br />
<br />
<hr /><br />
<br />
=='''<big>CREE</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>CREE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Connected LED Bulbs</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn ON the bulb > pause '''1''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''1''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''1''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb<br />
#The bulb will flash once, indicating it is reset and ready for pairing<br />
<br />
'''Factory Reset (Alternate Method)'''<br />
<br />
*'''''Method 1 - Use a Philips Hue Dimmer Switch'''''<br />
<br />
#Turn the bulb on (ensure there are no others in the same lamp, as they could be reset too, using this method).<br />
#Hold the remote within '''4''' inches of the bulb.<br />
#Press and hold the 1st (On / I in some countries) and the 4th (Off / O in some countries) buttons simultaneously for about '''10''' seconds, until the bulb starts flashing on and off.<br />
#If the bulb stopped flashing (it will normally turn fully on again after reset) and the green LED on the remote (top left of the remote) flashed green - your bulb is reset.<br />
#*''This method can be used for nearly ALL ZigBee LL bulbs.''<br />
<br />
*'''''Method 2 - Use a Lutron LZL-4B Connected Bulb Remote (Discontinued Product)'''''<br />
<br />
#Hold the remote within '''4''' inches of the bulb.<br />
#Press and hold the 2nd (up arrow) and 4th (light off) buttons simultaneously.<br />
#The bulb should flash on and off<br />
#The green LED on the remote should come on and may flash a few times.<br />
#Continue to hold both buttons on the remote until the green LED goes off completely.<br />
#*''This method can be used for nearly ALL ZigBee LL bulbs.''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Turn ON the bulb > pause '''2''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''2''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb > pause '''2''' seconds > turn OFF the bulb > pause '''2''' seconds > Turn ON the bulb<br />
#The bulb will flash once, indicating it is reset and ready for pairing<br />
<br />
'''Join the Zigbee Network''' '''(Alternate Method)'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#See '''Factory Reset (Alternate Method)''' above to reset the bulb and put it into pairing mode.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
<br />
=='''<big>Dome</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMWD1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the Cover and make sure the Door/Window Sensor is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED indicator flashes once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Cover of the Door/Window Sensor.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the Cover of the Door/Window Sensor.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMDP1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the Sensor Cover and confirm that your Door/Window Sensor is powered up.<br />
#Wait for '''5''' seconds.<br />
#Move the Magnet and Sensor Base in and out of the closed position '''6''' times.<br />
#The LED indicator will light up Red for '''5''' seconds when reset successfully. The Door/Window Sensor’s memory will be erased to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Sensor Cover and the LED indicator will start flashing yellow.<br />
#Press the Button quickly '''3''' times in a row.<br />
#The device will enter inclusion mode for two minutes and the LED indicator will alternate between green and red. After successful inclusion, the LED Indicator will flash green '''3''' times then flash red until the cover is replaced.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the SENSOR COVER and the LED indicator will start flashing red.<br />
#Press the Button quickly '''3''' times in a row.<br />
#The LED Indicator will flash green '''3''' times indicating successful exclusion from the Z-Wave network. It will continue flashing red (indicating tamper) until the cover is replaced.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMWS1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the Back Plate and make sure the Leak Sensor is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED indicator flashs once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Leak Sensor by twisting it apart.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the cover of the Leak Sensor by twisting it apart.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMMS1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the Cover and make sure the Motion Detector is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED indicator flashes once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Motion Detector by twisting it apart.<br />
#Press the Connect Button quickly '''3''' times in a row.<br />
#The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the cover of the Motion Detector by twisting it apart and make sure the Motion Detector is powered.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mouser</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMMZ1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mouse Trap</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the TOP COVER by sliding it back and lifting up. Confirm that your Mouser is powered up.<br />
#Press and hold the CONNECT BUTTON for at least '''10''' seconds then release.<br />
#A flashing LED indicator indicates a successful factory reset. The Mousers memory will be erased to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the TOP COVER by sliding it back and lifting up. Confirm that your Mouser is powered up.<br />
#Press the CONNECT BUTTON quickly '''3''' times in a row.<br />
#The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the TOP COVER by sliding it back and lifting up. Confirm that your Mouser is powered up.<br />
#Press the CONNECT BUTTON quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>On/Off Plug-In Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMOF1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Plug in the On/Off Plug-In Switch.<br />
#Hold the Connect Button for '''10''' seconds until the LED Indicator flashes once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug in the On/Off Plug-In Switch within range of your Z-Wave Controller.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED indicator will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Range Extender</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMEX1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the Button for '''10''' seconds until the LED flashes '''10''' times, then release the button<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#For proper inclusion, install the Range Extender in the final location where it will be used.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Plug the Range Extender into an outlet or use a micro USB (not included) to power it. The LED will flash '''5''' times indicating successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Button quickly '''3''' times in a row The LED will flash '''5''' times indicating successful exclusion.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMS01</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the Back Plate and make sure the Siren is powered.<br />
#Hold the Connect Button for '''10''' seconds until the LED Ring flashs once, then release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Back Plate of the Siren.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED Ring will flash '''5''' times indicating successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the Back Plate of the Siren.<br />
#Press the Connect Button quickly '''3''' times in a row. The LED Ring will flash '''5''' times indicating successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dome</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Main Shut-Off</big>'''</div><br />
|<div style="text-align: center;">'''<big>DMWV1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Shutoff Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the open/close button for at least '''10''' seconds then release.<br />
#The Shut-Off’s memory will be erased to factory settings. A flashing light indicates a successful factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the Water Main Shut-Off is powered on, then press the “open/close” button quickly '''3''' times in a row. The LED will stop flashing and stay on continuously upon successful inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#When prompted, press the “open/close” button on the Shut-Off quickly '''3''' times in a row.<br />
<br />
<hr /><br />
<br />
=='''<big>Dragon Tech</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Dragon Tech</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug in Z-Wave Plus Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>PD-100</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug the PD-100 and anything the is plugged into it.<br />
#Press and hold the button on the front of the PD-100<br />
#Plug the PD-100 in while still pressing the button<br />
#After '''3''' seconds, release the button. If the button flashes, the PD-100 has been successfully reset. If not, repeat the steps to factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the front of the PD-100<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button on the front of the PD-100<br />
<br />
<hr /><br />
<br />
==<big>'''Eaton''' '''(Cooper Wiring Devices)'''</big>==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eaton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wireless Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>RF9540</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the device switch once to exclude it from the network. The LED will start flashing, indicating the dimmer has been successfully excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Cooper Wiring Devices Z-Wave device has a blue LED, which will flash when the device is not included in a Z-Wave network. The LED stops flashing when the device is in a network.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the device switch once to include it in the network. The LED will stop flashing, indicating the dimmer has been successfully included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the device switch once to exclude it from the network. The LED will start flashing, indicating the dimmer has been successfully excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Ecolink</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>DWZWAVE2.5-ECO</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#When the exclusion process is complete, the LED on the sensor will be solid blue, then go out.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#When the inclusion process is complete, the LED on the sensor will be solid blue, then go out.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#When the exclusion process is complete, the LED on the sensor will be solid blue, then go out.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood/Freeze Sensor</big>''' </div><br />
|<div style="text-align: center;">'''<big>FLF-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#The Flood Freeze sensor factory defaults on network exclusion<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for '''1''' second, then reinstall it.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''10''' seconds, then reinstall it.<br />
#If the LED starts flashing continuously, the sensor has no node ID and was not successfully added, so start from step 1 again. Make sure to remove the battery for '''10''' seconds if adding to a Z-Wave network fails.<br />
#If after '''5''' seconds the LED is not flashing, look on Hubitat Elevation™ for feedback on whether the sensor was added successfully. If you do not see any feedback that the sensor was added, follow directions for exclusion of the sensor from a Z-Wave network, and then try adding the sensor again. If you are still having problems, you may need to add Z-Wave repeaters in-between the controller and the sensor.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Open the Flood Freeze case and remove the battery for '''1''' second.<br />
#Replace the battery and the device should be removed from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor with Pet Immunity</big>''' </div><br />
|<div style="text-align: center;">'''<big>PIR-ZWAVE2.5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter inclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the inclusion process.<br />
#Test the sensor before mounting it permanently. Check Hubitat Elevation™ device details status to observe changes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter exclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the exclusion process from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>SC-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug in the Z-Wave Plus Siren and verify a single beep sound is heard.<br />
#The LED on the front of the unit will turn off if successful exclusion from the network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Plug in the Z-Wave Plus Siren and verify a single beep sound is heard.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug in the Z-Wave Plus Siren and verify a single beep sound is heard.<br />
#The LED on the front of the unit will turn off if successful exclusion from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>FireFighter</big>'''</div><br />
|<div style="text-align: center;">'''<big>FF-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke/CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Open the FireFighter case and press the learn button on the device for '''1''' second.<br />
#If successfully removed from the Z-Wave Plus network, the devices Green LED should flash slowly continuously<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the FireFighter case and press the learn button on the device for '''1''' second.<br />
#If the LED starts flashing continually, the sensor has not been added. Repeat the steps.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Open the FireFighter case and press the learn button on the device for '''1''' second.<br />
#If successfully removed from the Z-Wave Plus network, the devices Green LED should flash slowly continuously<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DLS-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successfully included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch Double Toggle</big>''' </div><br />
|<div style="text-align: center;">'''<big>DTLS2-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch Dual Rocker</big>'''</div><br />
|<div style="text-align: center;">'''<big>DDLS2-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>''' </div><br />
|<div style="text-align: center;">'''<big>TILT-ZWAVE2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter inclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the inclusion process.<br />
#Test the sensor before mounting it permanently. The sensor LED will flash each time the sensor position is changed. Check Hubitat Elevation™ device details status to observe changes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter exclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the exclusion process from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>''' </div><br />
|<div style="text-align: center;">'''<big>TILT-ZWAVE2.5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Tilt Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter inclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the inclusion process.<br />
#Test the sensor before mounting it permanently. The sensor LED will flash each time the sensor position is changed. Check Hubitat Elevation™ device details status to observe changes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the battery for at least '''5''' seconds, then reinstall it.<br />
#Re-attach the battery cover and the device with enter exclusion mode<br />
#The LED will flash for '''10''' seconds and the go out. If the sensor LED continues to flash, repeat the exclusion process from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Toggle Light Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>TLS-ZWAVE5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
#The LED on the front of the unit will turn off if successful included in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion / exclusion button on the Smart Switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ecolink</big>'''</div><br />
|<div style="text-align: center;">'''<big>Pet Immune Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIRZB1-ECO</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the tamper switch while inserting one of the batteries<br />
#Release the tamper switch withing 4 seconds<br />
#The LED will flash 3 times every 5 seconds indicating the device is ready for paring<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press and hold the tamper switch while inserting one of the batteries<br />
#Release the tamper switch withing 4 seconds<br />
#The LED will flash 3 times every 5 seconds indicating the device is ready for paring<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the tamper switch while inserting one of the batteries<br />
#Release the tamper switch withing 4 seconds<br />
#The LED will flash 3 times every 5 seconds indicating the device is ready for paring again.<br />
<br />
<hr /><br />
=='''<big>Enerwave</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Enerwave</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ceiling Mounted PIR Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWN-BPC-Plus</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To reset the ZWN-BDC-PLUS, simply press the exclusion button on the sensor '''3''' times and hold for '''3''' seconds on the 3rd press.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the inclusion/exclusion button on the sensor '''3''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the inclusion/exclusion button on the sensor '''3''' times.<br />
<br />
<hr /><br />
=='''<big>Eva Logik</big>'''==<br />
{| class="wikitable"<br />
|-<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eva Logik</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW36</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch 3 times within '''2''' seconds.<hr /><br />
<br />
{| class="wikitable"<br />
|-<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eva Logik</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW37</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the button for 10 seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch 3 times within '''2''' seconds.<br />
<hr /><br />
<br />
#<br />
<br />
{| class="wikitable"<br />
|-<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Eva Logik</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW39</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the top button for at least '''3''' seconds while you plug the smart switch into a receptacle<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See Discovering your devices for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button on the switch 3 times within '''2''' seconds.<br />
<br />
=='''<big>Everspring</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>HSM02</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch three times within '''1.5''' second. The LED will be steady on.<br />
#Within '''1''' second, press and hold the tamper switch until LED is off.<br />
#The LED will cycle on for '''2''' seconds and off for '''2''' seconds indicating the sensor has been reset for factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing the tamper switch three times within '''1.5''' second and the sensor will enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing the tamper switch three times within '''1.5''' second will enter exclusion mode. The LED will light up once, each time the tamper switch is pressed.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ST812</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the link key three times within '''1.5''' second. The sensor will beep each time the link key is pressed.<br />
#Within '''1''' second, press and hold the link key. The sensor will long beep for '''5''' seconds. Keep holding the link key until the long beep stops.<br />
#The LED will cycle on for '''2''' seconds and off for '''2''' seconds indicating the sensor has been reset for factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing the link key three times within '''1.5''' second and the sensor will enter inclusion mode. The sensor will beep once, each time the link key is pressed.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing the link key three times within '''1.5''' second will enter exclusion mode. The sensor will beep once, each time the link key is pressed.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Temperature/Humidity Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ST814</big>'''</div><br />
|<div style="text-align: center;">'''<big>Temperature Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Pressing the temperature unit/linking key '''3''' times within '''1.5''' seconds will enter inclusion mode. The linking signal symbol will flash on the display.<br />
#Within '''1''' second, press the temperature unit/linking key again, and the sensor will emit a long beep. Keep holding the temperature unit/linking key until the long beep stops.<br />
#When the radio frequency status shows no signal, the device has been excluded from any previously joined Z-Wave networks and has been reset to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing the temperature unit/linking key '''3''' times within '''1.5''' seconds will enter inclusion mode. The linking signal symbol will flash on the display.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing the temperature unit/linking key '''3''' times within '''1.5''' seconds will enter inclusion mode. The linking signal symbol will flash on the display.<br />
#When the radio frequency status shows no signal, the device has been excluded from any previously joined Z-Wave networks<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Illumination Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ST815</big>'''</div><br />
|<div style="text-align: center;">'''<big>Light Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the '''ESC''' button three times within '''1.5''' second.<br />
#Within '''1''' second, press and hold the '''ESC''' button.<br />
#The sensor will long beep. Keep holding the link key until the long beep stops.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''ESC''' button three times within '''1.5''' second and the sensor will enter inclusion mode. The sensor LED will flash.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''ESC''' button three times within '''1.5''' second and the sensor will enter exclusion mode. The sensor LED will flash.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>HSP02</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press tamper switch three times within '''1.5''' second. The LED will be steady on.<br />
#Within '''1''' second, press and hold the tamper switch until LED is off.<br />
#The LED will cycle on for '''2''' seconds and off for '''2''' seconds indicating the sensor has been reset for factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second and the sensor will enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second will enter exclusion mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Everspring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Photoelectric Smoke Alarm</big>'''</div><br />
|<div style="text-align: center;">'''<big>SF813</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press tamper switch three times within '''1.5''' second. The LED flashes and the buzzer sounds when the link key is pressed.<br />
#Within '''1''' second, press and hold the tamper switch for '''5''' seconds until the LED is off.<br />
#The LED will light for '''5''' seconds and the buzzer will sound for '''5''' seconds<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second and the sensor will enter inclusion mode. The LED flashes and the buzzer sounds when the link key is pressed.<br />
#The detector will stay awake and remain in inclusion mode for '''10''' minutes, or until the device has successfully joined the Z-Wave network.,<br />
#The LED will light for '''1''' second and the buzzer will sound for '''1''' second to indicated the detector has joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Pressing tamper switch three times within '''1.5''' second and the sensor will enter exclusion mode. The LED flashes and the buzzer sounds when the link key is pressed.<br />
#The detector will stay awake and remain in exclusion mode for '''10''' minutes, or until the device has successfully joined the Z-Wave network.,<br />
#The LED will light for '''1''' second and the buzzer will sound for '''1''' second to indicated the detector has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Evolve</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Evolve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Isolated Contact Fixture Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>LFM-20</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is unavailable for this device. Instead, perform a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Exclude the module by tapping the button '''3''' times, then press and hold for '''10''' seconds.<br />
#*LFM-20 release 5.41 requires that you tap '''2''' times, then press and hold for '''10''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the device once to include it in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Exclude the module by tapping the button '''3''' times, then press and hold for '''10''' seconds.<br />
#*LFM-20 release 5.41 requires that you tap '''2''' times, then press and hold for '''10''' seconds.<br />
<br />
<hr /><br />
<br />
=='''<big>Fibaro</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGBS-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove and re-connect the power supply while holding down the B button<br />
#After 10 seconds, remove and re-connect the power supply again.<br />
#The settings of the device will be reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly press the '''B''' button '''3''' times (the button is located in the center of the device).<br />
#Watch the status in the device details page to confirm proper operation.<br />
#*'''NOTE''': Everytime changes are made to the configuration of TP and TD lines (1-wire), (i.e. When DS18B20 temperature sensors are Included or Excluded), it is necessary to perform an exclusion and repeated inclusion of the sensor modules to the hub. The system will enter into the programming mode only once all the connected sensors have been detected (about '''10''' seconds).<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the '''B''' button '''3''' times (the button is located in the center of the device).<br />
#Wait for the removing process to end.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGPB-101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Click the Button exactly five times.<br />
#Press and hold the Button for at least '''5''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Click the button at least '''6''' times.<br />
#Wait for the device to be added into the system, successful inclusion will be confirmed by Hubitat Elevation™<br />
#Click the button '''4''' times to wake it up<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click the Button at least '''6''' times.<br />
#Wait for the removing process to end.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor 2</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGDW-002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the cover and remove the battery.<br />
#Install the battery while holding both TMP buttons.<br />
#The LED indicator will be flashing slowly for '''5''' seconds, but keep holding the buttons.<br />
#Release one button when the LED indicator starts flashing quickly.<br />
#Click the released button once to confirm initiation of the reset procedure.<br />
#Wait a few seconds for a long flash of the LED indicator. '''Do not remove the battery'''.<br />
#The LED indicator will flash '''5''' times quickly to confirm reset of the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press one of the TMP buttons quickly, '''3''' times in a row, '''while keeping other button is pressed'''.<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press one of the TMP buttons quickly, '''3''' times in a row, '''while keeping other button is pressed'''.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGFS-101 FG3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Make sure the sensor is powered.<br />
#Press and hold the TMP button.<br />
#Wait for the visual LED indicator to glow yellow (4th position of the MENU).<br />
#Release the TMP button.<br />
#Click the TMP button once to confirm selection.<br />
#After few seconds the device will restart with factory settings, which is signaled with the red visual indicator color and an acoustic signal.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Removed the battery for '''10''' seconds, and re-install it<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the TMP button quickly, '''3''' times in a row.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flood Sensor ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGFS-101 ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Make sure the sensor is powered.<br />
#Press and hold the TMP button.<br />
#Wait for the visual LED indicator to glow yellow (4th position of the MENU).<br />
#Release the TMP button.<br />
#Click the TMP button once to confirm selection.<br />
#After few seconds the device will restart with factory settings, which is signaled with the red visual indicator color and an acoustic signal.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the TMP button quickly, '''3''' times in a row.<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the TMP button quickly, '''3''' times in a row.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>KeyFob</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGKF-601 ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Click '''O''' and '''<big>–</big>''' simultaneously.<br />
#Click '''∆''' or '''X''' until LED is '''Yellow''' - reset the device.<br />
#Click '''<big>+</big>''' to confirm selection, or is you do not wish to reset at this time, click <big>'''–'''</big> to exit the menu.<br />
#The LED will pulse '''Yellow''' twice to confirm the device has been reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#LED will pulse '''White''' during the adding process.<br />
#Wait for the inclusion process to end.<br />
#Successful adding will be confirmed by the Z-Wave controller’s message.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™ and the remote LED will be '''Green'''.<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click '''O''' and '''<big>–</big>''' simultaneously.<br />
#Click '''∆''' or '''X''' until LED is '''Green.'''<br />
#Click '''<big>+</big>''' to confirm selection.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGMS-001 ZW5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Open the cover<br />
#Press and hold the B-button.<br />
#Wait for visual indicator to glow '''Yellow''' (2nd menu position).<br />
#Release the '''B''' button and then briefly click the B-button to confirm selection<br />
#After few seconds the device will be reset, which is signaled with the '''Red''', fading visual indicator color.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''B''' button quickly, three times in a row.<br />
#Wait for the inclusion process to end.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''B''' button quickly, three times in a row.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGRGBW-101</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Disconnect the supply voltage.<br />
#Press and hold the '''B''' button located inside the RGBW Controllers casing.<br />
#Connect the the supply voltage, while still holding the '''B''' button.<br />
#Release the '''B''' button.<br />
#The '''B''' channel will turn on (blue channel).<br />
#Disconnect the power supply.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
('''Auto Inclusion''')<br />
<br />
#Make sure the RGBW Controller is not connected to a supply.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect voltage supply to auto-include the RGBW Controller.<br />
#The RGBW Controller will be automatically recognized and included in the Z-Wave network.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''(Manual Inclusion''')<br />
<br />
#Make sure the RGBW Controller is not connected to a supply.<br />
#To disable auto-inclusion press the '''B''' button briefly, after re-connecting the RGBW Controller to its supply voltage.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Triple click the '''B''' button or any switch connected to I1-I4 inputs.<br />
#The RGBW Controller will be recognized and included in the Z-Wave network.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple click the '''B''' button or any switch connected to I1-I4 inputs.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single Switch 2</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGS-213</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch off the mains voltage (disable the breaker).<br />
#Remove the Switch 2 from the wall switch box.<br />
#Switch on the mains voltage.<br />
#Press and hold the '''B''' button to enter the menu until the visual LED indicator is '''Yellow'''.<br />
#Quickly release and click the '''B''' button again.<br />
#After few seconds the device will be restarted, which is signaled by the '''Red''' LED indicator color.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Identify the S1 switch.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly, three times press the '''S1 switch'''.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Identify the '''S1 switch''' on the Fibaro Single Switch 2 From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly, three times press the '''S1 switch'''.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radiator Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>FIBEFGT-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button at the base of the thermostat head.<br />
#Release when the LED ring is '''Yellow'''.<br />
#Briefly press the button to confirm selection.<br />
#The device will reset and then go into Standby Mode.<br />
#Briefly press the button to activate the thermostat again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly '''3''' times in a row, press the at the base of the thermostat head.<br />
#The LED ring will start flashing '''White'''.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™ and the LED ring will show '''Green'''.<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Quickly '''3''' times in a row, press the at the base of the thermostat head.<br />
#The LED ring will start flashing '''White'''.<br />
#Successful exclusion will be confirmed by Hubitat Elevation™ and the LED ring will show '''Red'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGWPB-111 / FGWPB-121</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Make sure the device is powered.<br />
#Press and hold the button.<br />
#Wait for the LED frame to glow yellow (3rd menu position).<br />
#Release the button and then briefly click the button once to confirm the selection.<br />
#After few seconds the device will restart with factory settings, which is signaled with the red frame color.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the device into a socket.<br />
#The LED frame will glow red signaling it has not being added (If is doesn't you must first perform a general exclusion and then a factory reset).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly, triple click the button located on the casing.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Plug the device into a socket.<br />
#Identify the '''S1 switch''' on the Fibaro Single Switch 2 From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#The LED frame will glow green signaling it is currently included in a Z-Wave network (If it doesn't, then the exclusion process is not needed at this time).<br />
#Quickly, triple click the button located on the casing.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGWPE-102</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the button located on the side.<br />
#The device will cycle through GREEN, then VIOLET, and finally YELLOW for device reset.<br />
#Release the button.<br />
#Press the button again to confirm the selection and factory reset the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the device into a socket nearby the main Z-Wave controller.<br />
#The LED frame will glow red signaling not being added (reset or remove the device otherwise).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly, triple click the button on the side of the device.<br />
#The device will be included to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly, triple click the button on the side of the device.<br />
#Plug the device into a socket nearby the main Z-Wave controller.<br />
#The LED frame will glow green signaling being added (removing is not necessary otherwise).<br />
#Quickly, triple click the button on the side of the device.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Fibaro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer 2</big>'''</div><br />
|<div style="text-align: center;">'''<big>FGS-212</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch off the mains voltage (disable the breaker).<br />
#Remove the Dimmer 2 from the wall switch box.<br />
#Switch on the mains voltage.<br />
#Press and hold the '''B''' button to enter the menu until the visual LED indicator is '''Yellow'''.<br />
#Quickly release and click the '''B''' button again.<br />
#After few seconds the device will be restarted, which is signaled by the '''Red''' LED indicator color.<br />
#The device enters the calibration mode.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Identify switch no. 1 (turns the light on) or the B-button (located on the device’s housing).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly press switch no. 1 or the '''B''' button three times.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Identify the '''S1 switch''' on the Fibaro Single Switch 2 From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press switch no. 1 or the '''B''' button three times.<br />
#The device will be excluded from the Z-Wave network.<br />
#Dimmer 2 will start the calibration process<br />
<br />
<hr /><br />
=='''<big>First Alert</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>First Alert</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke & Carbon Monoxide Combo Alarm</big>''' </div><br />
|<div style="text-align: center;">'''<big>ZCOMBO-G</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke / CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Power up the device with the test button held down for '''10''' or more seconds<br />
#The device will reset all Z-Wave settings and leave the network. '''NOTE: The device will not remain awake after resetting and will go into standby mode.'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Slide battery door open and insert batteries.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button and the alarm will remain awake for 30 seconds on inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide battery door open, then remove and re-insert batteries.<br />
#Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button and the alarm will be excluded from the network.<br />
<br />
<hr /><br />
=='''<big>FortrezZ</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>FortrezZ</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multiple In / Out module</big>''' </div><br />
|<div style="text-align: center;">'''<big>MIMO2+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the program button for '''15''' seconds and then release.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Briefly press the program button once.<br />
#The status LED will flash when inclusion to the Z-Wave network completes.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button once.<br />
#The status LED will flash when the device has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>FortrezZ</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multiple In / Out module</big>''' </div><br />
|<div style="text-align: center;">'''<big>MIMOLite</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the program button for '''15''' seconds and then release.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#When the LED has a periodic single flash, the unit will be automatically included to the Z-Wave network.<br />
#If the LED is not flashing, then the button has been previously pressed and automatic inclusion mode is no longer active. In this case, briefly press the program button once.<br />
#The status LED will flash when the device has been excluded from the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button once.<br />
#The status LED will flash when the device has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>GE/Jasco</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Link Bulb</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn OFF the light for '''3''' second.<br />
#Turn ON the light for '''3''' seconds<br />
#Repeat this process '''5''' times<br />
#The bulb will dim and then flash once when successfully reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the bulb on.<br />
#The bulb will flash when connected to the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>12718</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12719/ZW4101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outdoor Plug-in Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12720/ZW4201</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>In-Wall Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>12721</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12722</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>In-Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>12724</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Toggle Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>12727</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press up and release the toggle switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Toggle Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>12729</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press up and release the toggle switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press up and release the toggle switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Fan Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>12730/ZW4002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-In Outdoor Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>14284</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug the switch from the outlet<br />
#Press and hold the manual/program button on the switch for at least three seconds while you plug the switch into an outlet<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Fan Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>14287</big>'''</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless fan control rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart fan control rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Tamper Resistant Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>14288</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the manual/program button '''3''' times, then press and hold the button for at least '''3''' seconds. The LED will flash '''5''' times to confirm.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>14291</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>14294</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Motion Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>26931</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and release the top button '''10''' times within '''5''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom button on the smart switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom button on the smart switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Motion Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>26933</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and release the top button '''10''' times within '''5''' seconds. The LED will flash '''3''' times quickly confirming change<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom button on the smart switch to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top button on the smart switch to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>28167</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#If plugged in, unplug the Dimmer from the receptacle.<br />
#Press and hold the top button for at least '''3''' seconds while you plug the dimmer into a receptacle.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>28169</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#If plugged in, unplug the Dimmer from the receptacle.<br />
#Press and hold the top button for at least '''3''' seconds while you plug the dimmer into a receptacle.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the manual/program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the manual/program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Hinge Pin Smart Door Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>32563/ZW6301</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and release the program button '''10''' times quickly.<br />
#The LED light will flash approximately eight times.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Single press and release the program button on the device to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Single press and release the program button on the device to exclude it from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-In Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>45853</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Unplug the switch.<br />
#Hold the button and plug in the switch.<br />
#Keep the button held down for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the dimmer at the circuit breaker.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Unplug the switch.<br />
#Hold the button and plug in the switch.<br />
#Keep the button held down for '''10''' seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Unplug the switch.<br />
#Hold the button and plug in the switch.<br />
#Keep the button held down for '''10''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>45856</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the top of the rocker (ON Switch) with '''10''' quick short presses.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the dimmer at the circuit breaker.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Restore power to the Smart Dimmer at the circuit breaker<br />
#Pairing Begins Automatically: LED Status Indicator flashs as the Smart Dimmer automatically scans for a compatible network controller to pair with.<br />
#After the Smart Dimmer is located and paired to the ZigBee network, the LED Status Indicator will stop flashing and the Smart Dimmer.<br />
#*'''Note:''' ''LED Status Indicator stops flashing if a timeout occurs: Auto-Scan mode will eventually time out if the device has not joined a ZigBee network. Press and release the front panel to restart pairing process following timeout.''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>45857</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Lift the air-gap switch at the bottom of the rocker to OFF position to power down the device.<br />
#Hold down the UP button<br />
#Push In the air-gap switch to ON position to power up the device.<br />
#Release the UP button within '''4''' seconds of power up.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the dimmer at the circuit breaker.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Restore power to the Smart Dimmer at the circuit breaker<br />
#Pairing Begins Automatically: LED Status Indicator flashes as the Smart Dimmer automatically scans for a compatible network controller to pair with.<br />
#After the Smart Dimmer is located and paired to the ZigBee network, the LED Status Indicator will stop flashing and the Smart Dimmer.<br />
#*'''Note:''' ''LED Status Indicator stops flashing if a timeout occurs: Auto-Scan mode will eventually time out if the device has not joined a ZigBee network. Press and release the front panel to restart pairing process following timeout.''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>46201</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press ON (Top) button '''3''' times then immediately press the OFF (Bottom) button '''3''' times.<br />
#The LED will flash ON/OFF '''5''' times when completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart switch rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GE/Jasco</big>'''</div><br />
|<div style="text-align: center;"> '''<big>Enbrighten Smart Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>46203</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to perform a general exclusion.<br />
#*12xxx series devices do not support factory reset from the device. A Z-Wave general exclusion is the only option.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to add it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the top or bottom of the wireless smart dimmer rocker to exclude it from the network.<br />
#*'''Note''': While some switches have a small tab to pull out, commonly referred to as an '''Air Gap,''' certain older GE switches do not disable power to the internal Z-Wave radio when the air gap is pulled. In such cases, where a mains powered device is refusing to join Hubitat Elevation™, try '''Z-Wave Exclude''' and then cut the power at the breaker box for '''30''' seconds before attempting the discovery procedure again.<br />
<br />
<hr /><br />
<br />
=='''<big>GLEDOPTO</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GLEDOPTO</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mini RGB+CCT Controller</big>''' </div><br />
|<div style="text-align: center;">'''<big>GL-MC-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Power '''ON''' the device and within 2 seconds, remove power.<br />
#Repeat the '''OFF''' and '''ON''' '''4 times''' in a row.<br />
#The device will reset to factory default on the 5th time the power is applied.<br />
#Reset is confirmed by the lights flashing '''4 times'''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove power from the GLEDOPTO Mini RGB+CCT controller.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power '''ON''' the device and within 2 seconds, remove power.<br />
#Repeat the '''OFF''' and '''ON''' '''4 times''' in a row.<br />
#The device will reset to factory default on the 5th time the power is applied.<br />
#Reset is confirmed by the lights flashing '''4 times'''.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Power '''ON''' the device and within 2 seconds, remove power.<br />
#Repeat the '''OFF''' and '''ON''' '''4 times''' in a row.<br />
#The device will reset to factory default on the 5th time the power is applied.<br />
#Reset is confirmed by the lights flashing '''4 times'''.<br />
<br />
<hr /><br />
=='''<big>GoControl</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GoControl</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Controllers</big>'''</div><br />
|<div style="text-align: center;">'''<big>GD00Z</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}''Includes Linear GD00Z-2, GoControl GD00Z-4, Linear GD00Z-5, ADT GD00Z-6, GoControl GD00Z-7 and NuTone ND00Z'' <br />
<br />
'''Factory Reset'''<br />
<br />
#Reset the controller by pressing the Link button '''5''' times.<br />
#A quick beep followed by a longer beep will indicate proper reset for the GD00Z series or ND00Z.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and release the Link button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Link button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>GoControl</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>WADWAZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program switch of WADWAZ-1 for '''1''' second and release. The LED light will flash continuously when the sensor has been successfully excluded.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Unscrew the screw fastening the rear cover and slide the rear cover down<br />
#Insert a CR123A battery into the battery compartment and LED will start to flash slowly, which means the sensor has not yet performed inclusion with the controller.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Once Hubitat Elevation™ discovers the device, the LED will stop flashing. If the LED does not stop flashing and is not discovered by your hub, relocate the WADWAZ-1 to within 100 feet (line of sight) of a Z-Wave repeater or your hub and restart Z-Wave Inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program switch of WADWAZ-1 for '''1''' second and release. The LED light will flash continuously when the sensor has been successfully excluded.<br />
<br />
<hr /><br />
=='''<big>Graber</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Graber</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motorized Shades</big>'''</div><br />
|<br />
|<div style="text-align: center;">'''<big>Shade</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Network Reset'''<br />
<br />
#Press and hold the button on the headrail end cap for '''7''' seconds or until the shade jogs once.<br />
#Release the button.<br />
#*NOTE: The will not reset the shade limits<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Place the single channel remote in programming mode by pressing and holding the programming button until the LED light bar begins to flash '''Green.'''<br />
#Release the button.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Place the single channel remote in programming mode by pressing and holding the programming button until the LED light bar begins to flash '''Green.'''<br />
#Release the button<br />
#The shade will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Halo Labs</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Halo</big>'''</div><br />
|<div style="text-align: center;">'''<big>Halo+</big>'''</div><br />
|<div style="text-align: center;">'''<big>LS001A</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke/CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#To reset, hold down center button for approximately '''20''' or more seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Once Halo greets you, it will automatically begin searching for a ZigBee network. Halo will glow for a couple minutes before timing out.<br />
#*To awaken the detector, double-tap the center button or hold the button for approximately '''3''' or more seconds.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Hold down the center button for approximately '''20''' ot more seconds. Halo will reset all ZigBee settings and leave the network. .<br />
<br />
<hr /><br />
=='''<big>Hampton Bay</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hampton Bay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wink Enabled Ceiling Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>MR101Z</big>'''</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Turn off your fan for '''3''' seconds, then turn it on for '''3''' seconds (Repeat '''5''' times)<br />
#The light will flash three times when the factory reset is successful.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn on your fan.<br />
#When successful, the fan will turn on at low speed and the light will flash three times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Perform a factory reset on the fan controller<br />
<br />
<hr /><br />
=='''<big>Hank</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hank</big>'''</div><br />
|<div style="text-align: center;">'''<big>One-Key Scene Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>HKZW-SCN01</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and holding the center "Z-button" for 20 seconds.<br />
#Release the button after '''20''' seconds and the LED will stay yellow for '''3''' seconds.<br />
#Within the '''3''' second period where the LED is yellow, short-press the Z-button to reset the controller to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the battery.<br />
#Triple click the center "Z-button".<br />
#If inclusion is successful, the LED will flash '''blue''' for less than '''5''' seconds, and then it will remain solid for '''15''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If exclusion is successful, the LED will flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hank</big>'''</div><br />
|<div style="text-align: center;">'''<big>Four-Key Scene Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>HKZW-SCN04</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and holding the center "Z-button" for '''20''' seconds.<br />
#Release the button after '''20''' seconds and the LED will stay yellow for '''3''' seconds.<br />
#Within the '''3''' second period where the LED is yellow, short-press the Z-button to reset the controller to factory defaults.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the battery.<br />
#Triple click the center "Z-button".<br />
#If inclusion is successful, the LED will flash '''blue''' for less than '''5''' seconds, and then it will remain solid for '''15''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#If exclusion is successful, the LED will flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Hank</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW LED Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>HKZW-RGB01</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle power to the bulb off and on '''3''' times quickly.<br />
#Within '''3''' times toggling the bulb, the final ending state of the switch or plug must be on.<br />
#If the exclusion is successful, the RGB BULB will quicly flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
#The bulb will remain '''warm white''' after the exclusion procedure is complete.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure power to the bulb is disconnected and the RGB BULB is close to the hub.<br />
#Insert the bulb into a socket and then turn it on.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle power to the bulb off and on '''3''' times quickly.<br />
#Within '''3''' times toggling the bulb, the final ending state of the switch or plug must be on.<br />
#If the exclusion is successful, the RGB BULB will quickly flash '''orange''' for less than '''5''' seconds, and then it will remain solid for '''3''' seconds.<br />
#The bulb will remain '''warm white''' after the exclusion procedure is complete.<br />
<br />
<hr /><br />
=='''<big>Heatit</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Dim</big>'''</div><br />
|<div style="text-align: center;">'''<big>14 444 44</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#By pressing and holding the main button for '''20''' seconds, the dimmer will be factory reset.<br />
#The connected light source will blink once and go in the OFF state if successfully reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the main button on the dimmer '''6''' times quickly.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the main button on the dimmer '''6''' times quickly. and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Temp2</big>'''</div><br />
|<div style="text-align: center;">'''<big>45 126 66</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the link button for '''20''' seconds<br />
#rES will be displayed.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the link button '''3''' times quickly.<br />
#The thermostat will display '''INC''' when the thermostat is successfully included.<br />
#*If inclusion fails, '''Err''' (error) will appear.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the link button '''3''' times quickly and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>45 126 86</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#When the device is excluded from the Z-Wave network, it will revert to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Plug-in the device and within '''1.5''' seconds, press the function button '''3''' times.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Unplug the device.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Plug-in the device and within '''1.5''' seconds, press the function button '''3''' times.<br />
#Wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Smoke 230V</big>'''</div><br />
|<div style="text-align: center;">'''<big>45 126 89</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Excluding the device from the Z-Wave network will reset it to factory settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#When power is applied, the smoke detector initiates a '''1''' minute warm-up period and will automatically enter inclusion mode.<br />
#*'''NOTE''': After the calibration process is finished, access inclusion mode by pressing the function button '''3''' times within '''1.5''' seconds.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the function button '''3''' times within '''1.5''' seconds and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heatit</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-TRM3</big>'''</div><br />
|<div style="text-align: center;">'''<big>54 305 98</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press both the Right and Center (down and confirm) buttons for '''20''' seconds.<br />
#The thermostat will be factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the center button until '''OFF''' is shown on the display (approx. 10 seconds).<br />
#Press the down button '''5''' times until you reach '''CON'''<br />
#Press and hold until the display shows a rotating light pattern. The thermostat will display '''INC''' when the thermostat has successfully joined the Z-Wave network.<br />
#*If inclusion fails, '''Err''' (error) will appear.<br />
#Successful inclusion will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the down button '''5''' times until you reach '''CON'''<br />
#Press the center (confirm) for approximately '''2''' seconds and wait for the exclusion process to finish. This will take a few moments to complete.<br />
<hr /><br />
=='''<big>Heiman</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Heiman</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee Gas Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS1CG</big>'''</div><br />
|<div style="text-align: center;">'''<big>Gas Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Plug in the gas detector. It will beep once and the indicator light will flash '''Green''' once.<br />
#Before the detector Zigbee radio can be reset, the gas detector must be in a ready state. The indicator light will alternate '''Red''' and '''Yellow''' while it is warming up.<br />
#After approximately '''3''' minutes, the detector indicator light will stop flashing Red and Yellow. It will now have a '''steady Green''' indicator light, denoting it is ready and has ented its working state.<br />
#Using the included tool or a straightened paperclip inserted in the small hole on the side, press the reset button for '''2''' seconds.<br />
#The '''Green''' indicator light will flash quickly, and after '''3''' seconds it will turn off briefly and then return to '''steady Green''' indicating thedetector has returned to its ready state.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Plug in the gas detector. It will beep once and the indicator light will flash '''Green''' once.<br />
#Before the detector Zigbee radio can be reset, the gas detector must be in a ready state. The indicator light will alternate '''Red''' and '''Yellow''' while it is warming up.<br />
#After approximately '''3''' minutes, the detector indicator light will stop flashing Red and Yellow. It will now have a '''steady Green''' indicator light, denoting it is ready and has ented its working state.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using the included tool or a straightened paperclip inserted in the small hole on the side, press the reset button for '''2''' seconds.<br />
#The '''Green''' indicator light will flash quickly, and after '''3''' seconds it will turn off briefly and then return to '''steady Green''' indicating thedetector has returned to its ready state.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Ensure the gas detector is plugged ing and ready.<br />
#Before the detector Zigbee radio can be reset, the gas detector must be in a ready state. The indicator light will alternate '''Red''' and '''Yellow''' while it is warming up.<br />
#After approximately '''3''' minutes, the detector indicator light will stop flashing Red and Yellow. It will now have a '''steady Green''' indicator light, denoting it is ready and has ented its working state.From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using the included tool or a straightened paperclip inserted in the small hole on the side, press the reset button for '''2''' seconds.<br />
#The '''Green''' indicator light will flash quickly, and after '''3''' seconds it will turn off briefly and then return to '''steady Green''' indicating thedetector has returned to its ready state.<br />
<br />
<hr /><br />
<br />
=='''<big>HomePro</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>HomePro</big>'''</div><br />
|<div style="text-align: center;">'''<big>Exterior Appliance Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZRP110</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the button on the front of the module once.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the button on the front of the module once.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the button on the front of the module once.<br />
<br />
<hr /><br />
=='''<big>Homeseer</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Indicator Light Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-FS100-L+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Light Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the Z-Wave button inside the sensor body for '''10''' seconds<br />
#If successful, the LED will flash '''5''' times.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the inclusion process to finish. This may take some time.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the exclusion process to finish. This may take some time.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Perimeter Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-FS100-W+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the Z-Wave button inside the sensor body for '''10''' seconds<br />
#If successful, the LED will flash '''5''' times.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the inclusion process to finish. This may take some time.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave network button on the front of the unit one time and wait for the exclusion process to finish. This may take some time.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-WD200+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Turn dimmer on by tapping the top of the paddle once.<br />
#Quickly tap top of the paddle '''3''' times.<br />
#If light turns off and then on again, the dimmer is reset. If not, repeat manual reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the inclusion process. This will take a few moments to complete.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the exclusion process. This will take a few moments to complete.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-WS200+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Turn dimmer on by tapping the top of the paddle once.<br />
#Quickly tap top of the paddle '''3''' times.<br />
#If light turns off and then on again, the dimmer is reset. If not, repeat manual reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the inclusion process. This will take a few moments to complete.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the paddle of the dimmer to begin the exclusion process. This will take a few moments to complete.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-DS100+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave button inside the sensor body for '''20''' seconds, the LED will stay on until the button is released.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Triple-click the Z-Wave button inside the sensor body and wait for the process to finish.<br />
#If successful, the sensor body LED will flash briefly and then stay on for '''3''' seconds.<br />
#If unsuccessful, the LED with flash briefly and then turn off. Should this happen, repeat the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple-click the Z-Wave button inside the sensor body.<br />
#If successful, the LED will turn off within '''1''' second.<br />
#If unsuccessful, the LED with flash for '''5''' seconds. Should this happen, repeat the exclusion process.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Homeseer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>HS-LS100+</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave button for '''20''' seconds. Release the button once the LED stops flashing and glows solidly<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Click the Z-Wave button inside the sensor body once and wait for the process to finish.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple-click the Z-Wave button inside the sensor body. Wait for the inclusion process to finish.<br />
<br />
<hr /><br />
=='''<big>Honeywell</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Honeywell</big>'''</div><br />
|<div style="text-align: center;"><big>'''T-6 Pro Z-Wave Thermostat'''</big></div><br />
|<div style="text-align: center;">'''<big>TH6320ZW2003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the '''Menu''' button for '''5''' seconds to access the '''Advanced Menu'''.<br />
#Touch the left '''<''' or right '''>''' arrow keys .to go through the options in the advanced menu.<br />
#Choose '''Reset'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#To include the thermostat from Z-Wave network, go to the thermostat '''Menu''', then '''Z-Wave Setup'''. and touch '''Select'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the inclusion procedure is successful, '''INCLUDED''', the node ID, and the Z-Wave connected status icon appear on the screen. If the procedure fails, then '''FAILED TO INCLUDE''' will appear on the screen. <br />
#*'''NOTE:''' • Before adding the thermostat to a Z-Wave network, check that it does not already belong to one. If the thermostat is included in Z-Wave network, it offers to '''Exclude'''. If the thermostat is excluded from Z-Wave network, it offers to include. You can also check the status by viewing the Node ID located in the thermostat MENU/ DEVICE INFO. An excluded thermostat should show zero for the Node ID ('''000''').<br />
#*Whether you are including or excluding thermostat from your Z-Wave network, first you have to initiate it on your Z-Wave controller. Please refer to the user manual of your Z-Wave controller. • For other specific tasks, such as adding the thermostat to home automation scenes or groups, refer to the Z-Wave controller instructions.<br />
#*The T6 Pro Z-Wave thermostat works in the optional Z-Wave battery mode or normal power mode based on its power source. The Z-Wave power mode can only be changed when thermostat is NOT included in Z-Wave network. You can check the power mode in the thermostat menu under MENU/DEVICE INFO. • If 24 VAC power source is not used or available, the thermostat must be powered by batteries. The thermostat will operate in LSS mode (power-save, sleep mode) to help conserve battery life after it has been included in a Z-Wave network. The Z-Wave radio supports beaming. It allows other devices in the network to wake up the Z-Wave thermostat, accept commands, and then go back to sleep.<br />
#*If you need the thermostat to operate AOS mode (always listening mode) to act as signal repeater and to increase network reliability, you need to ask your professional installer to power the thermostat by 24 VAC.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#To exclude the thermostat from Z-Wave network, go to the thermostat '''Menu''', then '''Z-Wave Setup'''. and touch '''Select'''.<br />
<br />
<hr /><br />
=='''<big>IKEA</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA SYMFONISK</big>'''</div><br />
|<div style="text-align: center;">'''<big>Sound Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>20370482</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover from the bottom of the remote and hold the button for 10 seconds to factory reset.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the remote.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover from the bottom of the remote and hold the button for 10 seconds.<br />
#Save the device and '''without deleting it from the hub''', repeat steps '''1''' and '''2''' above.<br />
#The hub will report that it found the previously paired device.<br />
#*NOTE: If you do not pair a second time with the device already in the Hubitat Elevation™ database, the remote may not work proplerly.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the battery cover from the bottom of the remote and hold the button for 10 seconds to factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA TRÅDFRI</big>'''</div><br />
|<div style="text-align: center;">'''<big>Warm White Bulb</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Cycle power '''6''' times. The bulb will begin to dim and finally flash one time to indicate that it has been successfully reset.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the bulb.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Cycle power '''6''' times. The bulb will begin to dim and finally flash '''1''' time to indicate that it has successfully joined the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Cycle power '''6''' times. The bulb will begin to dim and finally flash one time to indicate that it has been successfully reset.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the bulb again.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA TRÅDFRI</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Using a straightened paperclip, insert it into the small hole on the left side of the outlet next to the LED.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the outlet).<br />
#The LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using a straightened paperclip, insert it into the small hole on the left side of the outlet next to the LED.<br />
#Press and hold the paperclip in the hole for '''2-4''' seconds (you will feel the paperclip depressing a tiny button inside the outlet).<br />
#The LED will pulse slowly when pairing and will be steady when pairing has been successfully completed.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Using a straightened paperclip, insert it into the small hole on the left side of the outlet next to the LED.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the outlet).<br />
#The LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IKEA TRÅDFRI</big>'''</div><br />
|<div style="text-align: center;">'''<big>Signal Repeater</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Using a straightened paperclip, insert it into the small hole at the end of the repeater next to the USB port.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the repeater).<br />
#An LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Using a straightened paperclip, insert it into the small hole at the end of the repeater next to the USB port.<br />
#Press and hold the paperclip in the hole for '''2-4''' seconds (you will feel the paperclip depressing a tiny button inside the repeater).<br />
#The LED will pulse slowly when pairing and will be steady when pairing has been successfully completed.<br />
#The signal repeater will pair as '''Device'''. No driver will be assigned and it is not necessary to have one since this device only repeats Zigbee radio signals.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Using a straightened paperclip, insert it into the small hole at the end of the repeater next to the USB port.<br />
#Press and hold the paperclip in the hole for at least '''5''' seconds (you will feel the paperclip depressing a tiny button inside the repeater).<br />
#The LED will pulse quickly and then pulse slowly when you release the internal button.<br />
#Wait for at least '''10''' seconds after reset is complete before attempting to pair the device again.<br />
<br />
<hr /><br />
=='''<big>Innr</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Innr</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Spot Colour GU10</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>RS 230 C</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Cycle power '''6''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Cycle power '''6''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Cycle power '''6''' times.<br />
<br />
<hr /><br />
=='''<big>Inovelli</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi-White and Multi-Color Bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Power the bulb ON and OFF '''6''' times within '''2''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power the bulb ON and OFF '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Power the bulb ON and OFF '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>In-Wall Switch</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Hold the UP button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the top button for at least '''3''' seconds while you plug the outlet into a recepticle<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Once the controller is ready to include your device, press in and release the button on the switch '''3-5''' times within '''3''' seconds to include it in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Once the controller is ready to exclude your device, press in and release the button on the switch '''3-5''' times within '''3''' seconds to include it in the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch Module</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Factory reset is accomplished by performing a general exclusion on the device.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the center button '''5''' times within '''1''' second to exclude it in the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the center button '''5''' times within '''1''' second to include it in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the center button '''5''' times within '''1''' second to exclude it in the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch/Smart Scene Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>NZW30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Hold the UP button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Dimmer/Smart Scene Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>NZW31</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Hold the UP button for '''5''' seconds when powered on<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Top button on the switch '''6''' times within '''2''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Scene Switch S2</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>LZW30-SN</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Hold down the configure button for '''20''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the configure button '''3''' times. The LED bar will flash '''Blue'''.<br />
#If the switch was included successfully, the bard will turn '''Green'''. If the inclusion process was not successful, the LED bar will turn '''Red'''.<br />
#You can scheck the Z-Wave range by holding the configure button for 5-10 seconds. A '''Red''' bar indicates the switch is not in range of the controller or a signal repeater. '''Green''' indicates a good signal.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the configure button '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Inovelli</big>'''</div><br />
|<div style="text-align: center;">'''<big>On/Off Switch S2</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>LZW30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Hold down the configure button for '''20''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the configure button '''3''' times. The LED bar will flash '''Blue'''.<br />
#If the switch was included successfully, the bard will turn '''Green'''. If the inclusion process was not successful, the LED bar will turn '''Red'''.<br />
#You can scheck the Z-Wave range by holding the configure button for 5-10 seconds. A '''Red''' bar indicates the switch is not in range of the controller or a signal repeater. '''Green''' indicates a good signal.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the configure button '''3''' times.<br />
<br />
<hr /><br />
=='''<big>IRIS</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Button</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>BTN900</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Squeeze the two sides of the smart button together by the ridges and gently pull them apart to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery press the reset button next to the battery '''8''' times in a row, once per second.<br />
#Upon a successful reset, the smart button will flash green indicating the device is now ready to pair.<br />
#*'''NOTE:''' ''The green light can be dim, if you're in a well lighted area this light could be difficult to see.''<br />
#If your button does not flash green check your battery, then retry from step 2.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#With the smart button, squeeze the two sides together by the ridges and gently pull them apart to reveal the battery compartment.<br />
#Remove and re-insert the battery. When the smart button begins looking for your hub, the light around the button will flash green.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Squeeze the two sides of the smart button together by the ridges and gently pull them apart to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within 10 seconds of reinserting the battery press the reset button next to the battery '''8''' times in a row, once per second.<br />
#Upon a successful reset, the smart button will flash green indicating the device is now ready to pair.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see.''<br />
#If your button does not flash green check your battery, then retry from step 2.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Care Pendant</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PDT900</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the pendant should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the supplied access tool into the small opening at the top of the pendant. Gently pry open the case to reveal the battery compartment.<br />
#Insert the battery in the correct orientation. The pendant will light up and start flashing as it begins searching for your hub<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the pendant should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Door/Window Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>DWS800</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Squeeze the sides and pop open the sensor to reveal the battery, remove the battery and wait '''10''' seconds.<br />
#Reinsert the battery and immediately press the white reset button '''8''' times.<br />
#Your Iris Contact Sensor should now be flashing green indicating it's ready to pair<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the large piece, remove the back by squeezing the semi-circles on either side.<br />
#The sensor's LED will flash while searching for the hub.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Squeeze the sides and pop open the sensor to reveal the battery, remove the battery and wait '''10''' seconds.<br />
#Reinsert the battery and immediately press the white reset button '''8''' times.<br />
#Your Iris Contact Sensor should now be flashing green indicating it's ready to pair<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Keyfob</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>KEY903</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Presence Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the key fob should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Insert the battery in the correct orientation. The fob will light up and start flashing as it begins searching for your hub.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Insert the supplied access tool into the small opening at the top of the key fob. Gently pry open the case to reveal the battery compartment.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#Within '''10''' seconds of reinserting the battery, press either button '''8''' times in a row, once per second. The lights on the key fob should begin to flash.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>MOT800</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Squeeze the raised edges on the sides of the motion sensor to take it apart to expose the battery.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#As soon as the battery is reinserted, press the reset button '''8''' times in a row, once per second. The lights on the top right corner of the motion sensor should begin to flash. (You may have to make a shadow over the device to see the flashing light). Once the light is flashing you're ready to pair. <br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the large piece, remove the back by squeezing the raised edges on both sides.<br />
#Insert the battery. The sensor's LED will flash while searching for the hub.<br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Squeeze the raised edges on the sides of the motion sensor to take it apart to expose the battery.<br />
#Remove the battery for at least '''10''' seconds. Reinsert the battery.<br />
#As soon as the battery is reinserted, press the reset button '''8''' times in a row, once per second. The lights on the top right corner of the motion sensor should begin to flash. (You may have to make a shadow over the device to see the flashing light). Once the light is flashing you're ready to pair. <br />
#*'''NOTE:''' ''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V1 Smart Plug</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>SPG800</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the Smart Plug from the receptacle.<br />
#Press and hold the button on the front for '''15''' seconds.<br />
#Insert the Smart Plug back into the receptacle.<br />
#Immediately press the button on the front of the Smart Plug '''8''' times, allowing 1 second between each press.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the Smart Plug into any wall outlet.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the Smart Plug from the receptacle.<br />
#Press and hold the button on the front for '''15''' seconds.<br />
#Insert the Smart Plug back into the receptacle.<br />
#Immediately press the button on the front of the Smart Plug '''8''' times, allowing 1 second between each press.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Button</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3460-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Within '''10''' seconds after re-inserting battery, press the button '''8''' times. The light will very dimly flash solid blue, than flash blue (even more faintly).<br />
#*'''NOTES:''' ''The + side of the battery should be facing the bottom of the button when you insert the tray. At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.''<br />
#*''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.<br />
#*'''NOTES:''' ''The + side of the battery should be facing the bottom of the button when you insert the tray. At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.''<br />
#*''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Within '''10''' seconds after re-inserting battery, press the button '''8''' times. The light will very dimly flash solid blue, than flash blue (even more faintly).<br />
#*'''NOTES:''' ''The + side of the battery should be facing the bottom of the button when you insert the tray. At this point, a blue light should be flashing on the button's top. If you don't see this, take the battery back out and try again.''<br />
#*''The LED can be dim, if you're in a well lighted area this light could be difficult to see''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Door/Window Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3320-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Slide the battery cover off, remove the battery and wait '''10''' seconds.<br />
#Using a paper clip, press and hold the reset button completely down while reinserting the battery.<br />
#Hold the reset button for an additional '''2''' seconds and release. The contact sensor should begin flashing blue.<br />
#*'''NOTE:''' ''The reset button is a small black button above the battery.''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#After pairing test your Iris Contact Sensor is working by opening and closing the door or window it's set up on (The LED should flash GREEN when opened/closed)<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Slide the battery cover off, remove the battery and wait '''10''' seconds.<br />
#Using a paper clip, press and hold the reset button completely down while reinserting the battery.<br />
#Hold the reset button for an additional '''2''' seconds and release. The contact sensor should begin flashing blue.<br />
#*'''NOTE:''' ''The reset button is a small black button above the battery''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>GD-00Z-1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Garage Door Opener</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Unplug your device and wait '''10''' seconds<br />
#Restore power to the device<br />
#Press the Link (Z-Wave) button on the left side of the device '''5''' times within '''10''' seconds to reset your device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Perform a factory reset before attempting to join the Z-Wave network.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Ensure your Iris Garage Door Controller is plugged in, and the tilt sensor battery is active/working.<br />
#Press the Link (Z-Wave) button once located on the left of the Iris Garage Door Controller.<br />
#When your device triple beeps, it has successfully joined the Z-Wave network.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Once the controller is ready to exclude your device, press the Link (Z-Wave) button once located on the left side of the device.<br />
#The garage door controller should give a short beep immediately followed by a long beep.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Keypad</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3405-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery and wait '''10''' seconds.<br />
#Press and hold the tamper switch while inserting one battery. Hold tamper switch for '''2''' seconds after the battery is installed. The tamper switch is the little flat plastic tab located on the back where the mounting bracket connects to the device, it is above the battery compartment.<br />
#*Note: The factory reset process puts the security keypad back into pairing mode.<br />
#Upon a proper reset the top right icon will be flashing green on your keypad.<br />
#You may now insert the 2nd battery.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove battery. Wait '''10''' seconds then re-insert battery.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press and hold the tamper switch while inserting one battery. Hold tamper switch for '''2''' seconds after the battery is installed. The tamper switch is the little flat plastic tab located on the back where the mounting bracket connects to the device, it is above the battery compartment.<br />
#*Note: The factory reset process puts the security keypad back into pairing mode.<br />
#Upon a proper reset the top right icon will be flashing green on your keypad.<br />
#You may now insert the 2nd battery.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V3 Keypad</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>iL02_1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove only 1 AA battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side of the keypad and release when the status light flashes Red once.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove only 1 AA battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side of the keypad and release when the status light flashes Red once.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove only 1 AA battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side of the keypad and release when the status light flashes Red once.<br />
#A flashing Blue light indicates the device is reset and ready to pair again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Motion Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3326-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery and wait '''10''' seconds<br />
#Press and hold the reset button on the left side of the device as you reinsert the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#*'''Note:''' ''The reset button is a small white button located on the side of the motion sensor.''<br />
#Upon a successful reset your device will now be flashing Blue, indicating it's ready to pair.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery for '''10''' seconds and re-insert.<br />
#Replace the battery cover. The sensor's Blue LED will flash while searching for the hub.<br />
#Once paired the LED will stop flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press and hold the reset button on the left side of the device as you reinsert the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#*'''Note:''' ''The reset button is a small white button located on the side of the motion sensor.''<br />
#Upon a successful reset your device will now be flashing Blue, indicating it's ready to pair.<br />
#A flashing blue light indicates the device is reset and ready to pair again.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V3 Motion Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>iL07_1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side and release when the status light turns Red.<br />
#A flashing Blue light indicates the device is ready to pair.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side and release when the status light turns Red.<br />
#A flashing Blue light indicates the device is ready to pair.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery while holding down the reset button on the left side and release when the status light turns Red.<br />
#A flashing Blue light indicates the device is ready to pair.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Smart Plug</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3210-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the Smart Plug from the outlet and wait '''10''' seconds.<br />
#Press and hold the small white button on the front of the plug.<br />
#While holding the button, insert the Smart Plug back into the outlet.<br />
#As soon as the LED on the front of the plug lights up, release the button.<br />
#If the reset was successful the Blue LED on the front of the smart plug will be flashing. This means your smart plug is now ready to pair.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert your smart plug into any wall outlet. Your smart plug should be flashing Blue, that means it's in pairing mode.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press and hold the small white button on the front of the plug.<br />
#While holding the button, insert the Smart Plug back into the outlet.<br />
#As soon as the LED on the front of the plug lights up, release the button.<br />
#If the reset was successful the Blue LED on the front of the smart plug will be flashing. This means your smart plug is now ready to pair.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>V2 Smart Fob</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3450-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Twist open the battery cover on the back of the Smart Fob.<br />
#Remove the battery and wait '''10''' seconds<br />
#Reinstall the battery with the positive side facing you.<br />
#Once the battery is installed, push any of the four buttons '''8''' times in a row, once per second.<br />
#Confirm that the fob has been reset by checking that the fob's background light is flashing Blue. If it does not do this, check the battery and retry from step 2.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert the battery so the plus sign is facing you. Put the cover on and twist tighten with a coin.<br />
#The Smart Fob's LED will flash Blue while searching for the hub.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Twist open the battery cover on the back of the Smart Fob.<br />
#Remove the battery and wait '''10''' seconds<br />
#Reinstall the battery with the positive side facing you.<br />
#Once the battery is installed, push any of the four buttons '''8''' times in a row, once per second.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>IRIS</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Water Sensor</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>3315-L</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Remove the cover from the sensor, then remove the battery for at least '''10''' seconds.<br />
#Press and hold the reset button while reinserting the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#A successful reset will be indicated by a flashing Blue light on your sensor<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Factory reset the device before attempting to pair.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery and wait '''10''' seconds.<br />
#Re-insert the battery<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the cover from the sensor, then remove the battery for at least '''10''' seconds.<br />
#Press and hold the reset button while reinserting the battery.<br />
#Hold for an additional '''2''' seconds and release.<br />
#A successful reset will be indicated by a flashing Blue light on your sensor<br />
<br />
<hr /><br />
<br />
=='''<big>KEEN Home</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>KEEN Home</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Vent</big>''' </div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Vent</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Press the black button on the back inside of the Smart Vent battery compartment '''5''' times.<br />
#You will know that the Smart Vent has been properly reset when the LED starts double flashing Green<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Removed the battery cartridge and reinsert it to bring the vent online.<br />
#Press the black button on the back inside of the Smart Vent battery compartment '''5''' times.<br />
#This should force the vent into join-mode once again.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press the black button on the back inside of the Smart Vent battery compartment '''5''' times.<br />
#You will know that the Smart Vent has been properly reset when the LED starts double flashing Green<br />
<br />
<hr /><br />
=='''<big>Kwikset</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Kwikset</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartCode</big>'''</div><br />
|<div style="text-align: center;">'''<big>910 / 912 / 914</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove battery pack<br />
#Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for '''30''' seconds until the lock beeps and the status LED flashes Red.<br />
#Press the Program button once more. When the LED flashes Green and you hear one beep, the lock has been reset.<br />
#Perform the '''door handing''' process again.<br />
#*Press and hold the Lock button while installing battery pack.<br />
#*Hold button until the latch bolt starts moving on its own. If the latch bolt retract and extend on its own when the battery pack was installed, then the handing process was successful.<br />
#*If the latch bolt does not retract and extend on its own, remove the battery pack and wait '''15''' seconds, before attempting the handing process again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Hold the interior assembly a maximum of 12" (305 mm) from your Z-Wave controller<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock one time to include it. The controller and lock must remain stationary for a total of '''60''' seconds during the Inclusion process.<br />
#If Inclusion is unsuccessful, go to the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock one time. Once the lock is fully Excluded from the system, repeat the Inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock one time. Once the lock is fully Excluded from the system. The controller and lock must remain stationary for a total of '''60''' seconds during the Inclusion process.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Kwikset</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartCode</big>'''</div><br />
|<div style="text-align: center;">'''<big>910 / 912 / 914</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove battery pack<br />
#Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for '''30''' seconds until the lock beeps and the status LED flashes Red.<br />
#Press the Program button once more. When the LED flashes Green and you hear one beep, the lock has been reset.<br />
#Perform the '''door handing''' process again.<br />
#*Press and hold the Lock button while installing battery pack.<br />
#*Hold button until the latch bolt starts moving on its own. If the latch bolt retract and extend on its own when the battery pack was installed, then the handing process was successful.<br />
#*If the latch bolt does not retract and extend on its own, remove the battery pack and wait '''15''' seconds, before attempting the handing process again.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Hold the interior assembly a maximum of 12" (305 mm) from your hub.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press button '''A''' on the lock '''4''' times to pair it. The controller and lock must remain stationary for a total of '''60''' seconds during the pairing process.<br />
#*If pairing is unsuccessful, press button '''B''' on the lock '''9''' times and repeat the pairing process.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press button '''B''' on the lock '''9''' times'''.'''<br />
<br />
<hr /><br />
<br />
=='''<big>Leak Intelligence</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leak Intelligence</big>'''</div><br />
|<div style="text-align: center;">'''<big>Leak Gopher</big>''' </div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|} <br />
<br />
'''Factory Reset'''<br />
<br />
#Unplug your device and wait '''10''' seconds<br />
#Restore power to the device<br />
#Press the Link (Z-Wave) button on the left side of the device '''5''' times within '''10''' seconds to reset your device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-Wave button once.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Once the controller is ready to exclude your device, press the Z-Wave button once.<br />
<br />
<hr /><br />
=='''<big>Leviton</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Plug-in Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>DZPA1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the control button for a total of 7 seconds and the locator LED flashes '''Amber'''.<br />
#Following the first 7 seconds, the locator LED will flash quickly, alternating between red and amber after 14 seconds.<br />
#Release the top paddle to complete the reset process.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashes '''Amber'''.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the control button one time and the locator LED will quickly flash green.<br />
#Upon successful inclusion to the Z-Wave network, the LED will turn off and then flash '''Green''' 3 times.<br />
#If inclusion fails, the LED will flash '''Red''' 3 times.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashes '''Amber'''.<br />
#Tap the locator button one time and the locator LED will quickly flash green.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>DZ6HD</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the top paddle button for a total of 14 seconds.<br />
#Following the first 7 seconds, the LED will turn amber.<br />
#The locator LED will flash quickly, alternating between red and amber after 14 seconds.<br />
#Release the top paddle to complete the reset process.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashs '''Amber'''.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Tap the locator button one time and the locator LED will quickly flash green.<br />
#Upon sucessful inclusion to the Z-Wave network, the LED will turn off and then flash '''Green''' 3 times.<br />
#If inclusion fails, the LED will flash '''Red''' 3 times.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter programming mode by holding the control button for 7 seconds until the locator LED flashs '''Amber'''.<br />
#Tap the locator button one time and the locator LED will quickly flash green.<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>DL15S</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Hold the top paddle for 14 seconds (after the first 7 seconds the LED will turn Amber).<br />
#The Locator LED will alternate flashing Red and Amber after 14 seconds.<br />
#Release the top paddle to complete the factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Hold the top paddle for 7 seconds (The locator LED will flash Amber).<br />
#Tap the top paddle and the Locator LED will quickly flash Green<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the top paddle for 14 seconds (after the first 7 seconds the LED will turn Amber).<br />
#The Locator LED will alternate flashing Red and Amber after 14 seconds.<br />
#Release the top paddle to complete the factory reset.<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Leviton</big>'''</div><br />
|<div style="text-align: center;">'''<big>4-Scene Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>VRCS4</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#On the 4-Scene controller, press and hold buttons '''1''' and '''3'''.<br />
#Wait approximately '''5''' seconds until the LED turns amber and then solid red.<br />
#Release the buttons and the 4-Scene controller will be reset. '''NOTE: Factory reset does not exclude the device from any previous networks it has joined. The exclusion process must still be performed separately.'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
'''Leaving the Z-Wave Network'''<hr /><br />
<br />
=='''<big>Linear</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Linear (GoControl)</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door / Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>WADWAZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*'''See [[Discovering your Devices|Discovering your devices]] for detail instructions.'''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Depress the Tamper switch for '''1''' second then release. The LED on the sensor will begin flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#The LED on the sensor will stop flashing<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Tamper switch of WADWAZ-1 for '''1''' second and release to exclude the device form the Z-wave network.<br />
#The LED light will flash continuously when the sensor is in the excluded condition.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Linear (GoControl)</big>'''</div><br />
|<div style="text-align: center;">'''<big>PIR Motion Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>WAPIRZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Depress the Tamper switch for '''1''' second then release. The LED on the sensor will begin flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#The LED on the sensor will stop flashing<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Tamper switch of WAPIRZ-1 for '''1''' second and release to exclude the device form the Z-wave network.<br />
#The LED light will flash continuously when the sensor is in the excluded condition.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Linear (GoControl)</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren / Strobe</big>'''</div><br />
|<div style="text-align: center;">'''<big>WA105DBZ-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Factory reset is achieved by performing a general exclusion.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the siren/strobe Program/Tamper switch for '''1''' second then release. The LED on the sensor will begin flashing.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#The LED on the sensor will stop flashing<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Exclusion the Z-Wave Network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the siren/strobe Program/Tamper switch for '''1''' second then release to exclude the device form the Z-wave network.<br />
#The LED light will flash continuously when the sensor is in the excluded condition.<br />
<br />
<hr /><br />
=='''<big>Lutron</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Aurora</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly press the center button '''3''' times and hold on the thrid press for aproximatley '''6''' seconds until the LED flashes.<br />
#Once LED is flashing quickly tap button '''3''' time again.<br />
#The LED will flash rapidly to indicate the device has been successfuly reset for factory defaults.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly press the center button on the Aurora '''2''' times to begin pairing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Dimmers and Switches</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Dimmer / Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#All paired Pico remote controls are removed and all settings are returned to factory default.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Caséta Smart Bridge Pro</big>'''</div><br />
|<div style="text-align: center;">'''<big>L-BDGPRO2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bridge</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Network Reset'''<br />
<br />
#First, press and hold the black button on the back of your Smart Bridge for '''20''' seconds.<br />
<br />
'''Factory Reset'''<br />
<br />
#Quickly tap the button '''3''' times and hold. '''DO NOT release after the third tap'''.<br />
#Continue to hold the Add button for a few seconds. The LEDs will begin to flash slowly (approximately once per second).<br />
#Release the button and quickly tap the button '''3''' times. The LEDs will flash quickly and then will turn off. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly)<br />
#The Lutron Smart Bridge Pro has now been returned to Factory Default Settings.<br />
<br />
'''NOTE''': ''Lutron does not recommend factory resetting a Smart Bridge Pro unless advised by a member of the Lutron technical support team.''<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Pico Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>PJ2-</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#All paired Pico remote controls are removed and all settings are returned to factory default.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Keypads</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#The RA2 keypad has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Main Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>RR-MAIN-REP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the Test button on a Main Repeater '''3''' times. '''DO NOT release the button after the third tap.'''<br />
#Keep the Test button pressed on the third tap until all the LEDs start to flash red slowly (approximately '''3''' seconds).<br />
#Release the Test button and immediately tap '''3''' times again. All the LEDs will flash Red quickly.<br />
#When the LEDs stop flashing, the Main Repeater has been returned to factory settings<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Occupancy Sensors</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
*'''Radio Powr Savr™ Occupancy/Vacancy Ceiling Sensor – 1st Generation (LRF2-xCRB-)'''<br />
<br />
#Quickly tap '''3''' times and hold the Test, Lights ON, or Lights OFF button on the Sensor. '''DO NOT release after third tap'''.<br />
#Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second).<br />
#Release the button and tap it again '''3''' times until the dome LED on the Sensor flashes quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Sensor has now been returned to Factory Default Settings.<br />
<br />
*'''Radio Powr Savr™ Occupancy/Vacancy Ceiling Sensor – 2nd Generation (LRF2- xCR2B-)'''<br />
<br />
#Quickly tap '''3''' times and hold the Test or Light button on the Sensor. '''DO NOT release after third tap.'''<br />
#Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second).<br />
#Release the button and tap '''3''' times again until the dome LED on the Sensor flashes quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Sensor has now been returned to Factory Default Settings.<br />
<br />
*'''Radio Powr Savr™ Occupancy/Vacancy Wall-Mounted Sensor'''<br />
<br />
#Quickly triple tap and hold the Sensor, Lights ON, or Lights OFF button on the Sensor. '''DO NOT release after third tap.'''<br />
#Keep the button pressed after the third tap for a few seconds until the lens LED begins to flash slowly (approximately once per second).<br />
#Release the button and tap it again '''3''' times until the lens LED on the Sensor flashes quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Sensor has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Radio RA2 Select Main Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>RR-SEL-REP2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly tap '''3''' times and hold down any button on the Main Repeater. '''DO NOT release after the third tap.'''<br />
#Continue to hold the button for a few seconds. The Main Repeater LEDs will begin to flash Red slowly (approximately once per second).<br />
#Release the button and quickly tap '''3''' times again. The Main Repeater LEDs will flash Green rapidly and then will reset, turning off all LEDs and then flashing the LEDs and beeping once. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The Main Repeater and system components have now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device.<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>RadioRA2 VCRX Visor Control Receiver</big>'''</div><br />
|<div style="text-align: center;">'''<big>RR-VCRX</big>'''</div><br />
|<div style="text-align: center;">'''<big>Garage Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Quickly tap '''3''' times and hold any button (except Learn) on the VCRX. '''DO NOT release after third tap.'''<br />
#Keep the button pressed after the third tap for a few seconds until all the status LEDs start to flash slowly (approximately once per second).<br />
#Release the button and tap '''3''' times again until all the status LEDs on the VCRX flash quickly. (*Note* The time between release and the second triple tap must be less than half a second, thus must be performed very quickly).<br />
#The VCRX has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device.<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Serena Shades</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Shade Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the shade button quickly '''3''' times, and hold the shade button after the third tap until the shade button LED flashs Green rapidly.<br />
#Immediately tap the shade button quickly '''3''' more times, until the shade button LED flashes '''Green''' rapidly, then flashes '''Red/Green''' '''3''' times, and turns off.<br />
#The Serena shade has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Sivoia QS Triathlon Shades</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Shade Control</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the shade button quickly '''3''' times, and hold the shade button after the third tap until the shade button LED flashs Green rapidly.<br />
#Immediately tap the shade button quickly '''3''' more times, until the shade button LED flashes '''Green''' rapidly, then flashs '''Red/Green''' '''3''' times, and turns off.<br />
#The Sivoia shade has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>RadioRA2 Fan Control</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>RRD-2ANF</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the tapswitch '''3''' times on a control. '''DO NOT release after the third tap.'''<br />
#Keep the tapswitch pressed on the third tap (for approximately '''3''' seconds) until the LEDs on the dimmer start to scroll up and down quickly, or the LED on the switch flashes quickly<br />
#Release the tapswitch and immediately tap it '''3''' times again.<br />
#The LEDs on the dimmer will scroll up and down slowly and then the LED on the switch will flash slowly, indicating it has now been returned to Factory Default Settings.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device.<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lutron</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Caséta Fan Control</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PD-FSQN</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Fan Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lutron Clear Connect</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the "On" button quickly '''3''' times, holding on the last press.<br />
#Continue to hold the "On" button until the light begins to flash quickly.<br />
#Release the button, then immediately tap the button '''3''' more times.<br />
#All paired Pico remote controls are removed and all settings are returned to factory default.<br />
<br />
'''Join the Lutron Clear Connect network'''<br />
<br />
#See the [[Lutron Integrator|Lutron Integrator documentation]].<br />
<br />
'''Leaving the Lutron Clear Connect network'''<br />
<br />
#From the device's details page, select Remove Device, then Remove<br />
#Perform a factory reset on the device<br />
<br />
<hr /><br />
=='''<big>LUX</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Lux</big>'''</div><br />
|<div style="text-align: center;">'''<big>KONOz</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Access the installation settings by going to the main menu and selecting the gear icon.<br />
#You will see “IS” on the screen and will be prompted to select “yes” or “no”.<br />
#Select “yes” to access the installation settings.<br />
#Rotate the knob to view settings and press the knob to confirm.<br />
#Once in the installer settings, rotate the knob to '''99'''.<br />
#Press the knob to confirm, then press and hold the knob for '''3''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform factory reset.<br />
#KONOz is now ready to be configured for your heating and cooling system. The KONOz will guide you through the initial system configuration.<br />
#After confirming your system settings, KONOzwill ask if you would like to connect to a Smart Hub. Select “SET” to establish a connection.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Perform factory reset.<br />
<br />
<hr /><br />
=='''<big>MCO Home</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>MCO Home</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>MH-DT311</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press '''10''' times of any button or exclude the device from Z-Wave network, then cut off the main power.<br />
#The factory setting will be restored.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press 3 times on "+" or "-" button to add the device. If successful, the green LED flashes '''4''' times.<br />
#*Note: If an external switch is wired to the dimmer, you may also toggle that '''3''' times to add the device to the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press 3 times on "+" or "-" button to exclude the device from the network. If successful, the green LED flashes '''4''' times.<br />
#*Note: If an external switch is wired to the dimmer, you may also toggle that '''3''' times to add the device to the network.<br />
<br />
<hr /><br />
=='''<big>Monoprice</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>24259</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To reset the sensor, press and hold the Z-button for about '''20''' seconds.<br />
#The LED will change from steadily illuminated to flashing then back to steadily illuminated, indicating that the reset operation was successful.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to include the device in the network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to exclude the device from the network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Plug-In Dimmer</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>11994</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device, returning the device to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Plug-In ON/OFF</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>11995</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device, returning the device to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Recessed Door/Window sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15268</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-button for '''20''' seconds and then release it. Your sensor will now be reset to its original settings<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the Z-button on your sensor. If your sensor has been successfully linked to your network, its LED will turn solid for '''2''' seconds and then turn off.<br />
#If linking was unsuccessful, the LED will continue to flash if you tap its button.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-button on your Sensor. If your switch has been successfully unlinked to your network, its LED will start to flash for a short time.<br />
#If linking was unsuccessful, the LED will return to its last state. Tap the button to confirm if it has been unpaired, if unpaired successfully, the LED will flash when tapped.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15270</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device and return it to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device. The LED will stop flashing and glow steading to indicate the device has joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PIR Motion Sensor with Temperature</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15271</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device and return it to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to include the device. The LED will stop flashing and glow steading to indicate the device has joined the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and hold the program button on the front for about '''1''' second to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Plug-in Outlet</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15654</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold the Z-button for '''20''' seconds and then release it. Your sensor will now be reset to its original settings<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#If the plug-in has not already been included into a Z-Wave network, the LED indicator will flash rapidly. Otherwise, the plug-in has already been included and must first be excluded before it can join the Hubitat Elevation™ Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click the Z-Button '''3''' times. The plug-in will be removed from your Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>4 in 1 motion sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>15902</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the program button, the LED will flash, indicating the sensor is no longer joined to the Z-Wave network and has returned it to a factory state.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Momentarily press the '''Program Switch'''<br />
#The LED should flash '''5''' times indicating the sensor has not yet been included in the Z-Wave network.<br />
#If the LED flashes only '''1''' time, then it has already been included in a Z-Wave network and must first be excluded before it may join the Hubitat Elevation™ Z-Wave network.<br />
#Momentarily press the button again after it flashes '''5''' times, to automatically include the sensor in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program button, the LED will flash, indicating the sensor is no longer joined to the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Monoprice</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Smart Plug and Repeater</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>27481</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure that the smart plug is inserted into an AC outlet.<br />
#Press and hold the Z-Button on the smart plug for more than '''20''' seconds.<br />
#The LED indicator will illuminate Yellow steadily for about '''2''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to include the device in the network.<br />
<br />
'''Testing the Smart Plug Z-Wave connection'''<br />
<br />
You can test the connectivity of the Z-Wave network connection, with the RGB LED being used to indicate the connection quality.<br />
<br />
To begin testing, press and hold the Z button for '''6-9''' seconds, releasing the button when the RGB LED illuminates violet.<br />
<br />
*'''''Note'':''' The smart plug must be included into a Z-Wave network to test the network connection. You can abort the test at any time by pressing the Z button.<br />
**'''Flashing Green''': The RGB LED will flash Green while the smart plug is attempting to establish a connection with the main controller.<br />
**'''Solid Green''': The RGB LED will illuminate Green for about '''2''' seconds to indicate that direct communications are stable.<br />
**'''Flashing Orange''': The RGB LED will flash Orange while the smart plug is attempting to establish a connection with the main controller with intermediate radio transmitting power.<br />
**'''Solid Orange''': The RGB LED will illuminate Orange for about '''2''' seconds to indicate that the communication quality is moderate.<br />
**'''Solid Red''': The RGB LED will illuminate Red for about '''2''' seconds to indicate that they communications attempt has failed.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Rapidly press the Z-button '''3''' times to exclude the device from the network.<br />
#The RGB LED will flash Orange while the smart plug is being removed.<br />
#The smart plug will be removed from your Z-Wave network and the RGB LED will then illuminate Orange steadily for about '''2''' seconds.<br />
<br />
<hr /><br />
==<big>'''NanoLeaf'''</big>==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NanoLeaf</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Light Panels</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Aurora / Canvas</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Disconnect power to the Nanoleaf Light Panels.<br />
#Hold the Toggle and Power buttons together and reconnect the power without releasing the buttons.<br />
#After about '''7''' seconds, the WiFi status LED will start to flash rapidly.<br />
#Once the flashing begins, you can release the buttons.<br />
#You must then wait '''3''' minutes for the Nanoleaf Light Panels to reset to factory default settings and boot-up.<br />
<br />
'''Join the LAN'''<br />
<br />
#Use the '''NanoLeaf Smarter Series''' app from your mobile device to setup your light panels on the WiFi network.<br />
#From the Hubitat Web Interface home page, select '''Devices''', then '''Add Virtual Device'''<br />
#*See [[Devices]] for further detail.<br />
#Name your device and select '''Nanoleaf Aurora''' from the device ''Type'' drop-down menu, and press '''Save'''.<br />
#In the Preferences field of the driver, enter the IP address of your Nanoleaf panel.<br />
#*'''NOTE:''' You should reserve the IP address for your NanoLeaf light panels in your router just as you do for your Hubitat Elevation™ hub. If you do not, the IP address will change when the DHCP lease on your router expires for connected IP devices. The result will be that the NanoLeaf Aurora driver will no longer be able to find your device.<br />
#Press '''Save''' again in the driver.<br />
#One your NanoLeaf panel, press the pairing button.<br />
#In the NanoLeaf Aurora driver, press the '''Get Auth Token''' button.<br />
#Test your panel for proper operation.<br />
#*<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Plug your Light Panels into power. After a '''1''' minute bootup sequence the panels will show the last scene that was playing<br />
#Press and hold down the '''Effect Select''' and '''Power''' buttons on the controller for about '''10''' seconds, until the LED on the controller begins flashing<br />
#Release the two buttons and the LED on the controller will remain on and steady<br />
#Delete the previous device from the app and setup once again<br />
<hr /><br />
=='''<big>Neo</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">'''<big>Brand</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device</big>'''</div><br />
|<div style="text-align: center;">'''<big>Product Number</big>'''</div><br />
|<div style="text-align: center;">'''<big>Device Type</big>'''</div><br />
|<div style="text-align: center;">'''<big>Protocol</big>'''</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-DS01ZE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove tlease expires for the assigned IP address.<br />
#<br />
#he cover of contact sensor main body.<br />
#Make sure the sensor is connected to power source.<br />
#Press and hold the reset button for '''10''' seconds, the LED light will flash Red once.<br />
#Release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The contact sensor will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times and the sensor will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-DS02ZU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the cover of contact sensor main body.<br />
#Make sure the sensor is connected to power source.<br />
#Press and hold the reset button for '''10''' seconds, the LED light will flash Red once.<br />
#Release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The contact sensor will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times and the sensor will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-PD01ZU-T</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the sensor’s cover.<br />
#Make sure the sensor is connected to power source.<br />
#Press the code button for '''10''' seconds, the LED will flash Red once.<br />
#Release the code button.<br />
#*'''NOTE:''' When the PIR is being restored to factory settings, please make sure a power source is connected.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The motion sensor will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times and the sensor will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Power Plug</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-WR02Z</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the code button on the front of the outlet for '''10''' seconds.<br />
#When the LED flashes, release the button.<br />
#When the outlet has been reset, the LED will flash on and off '''5''' times within a '''2''' second period.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash '''5''' times.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the code button '''3''' times, the LED light will flash for '''5''' times and the device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>One Key SOS</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-RC03ZU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the code button for '''10''' seconds.<br />
#Release the Code button. '''Note:''' Do not power off during factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times and the device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Neo</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>One Key SOS and Remote Control</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NAS-RC03ZU</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the code button for '''10''' seconds.<br />
#Release the Code button. '''Note:''' Do not power off during factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly click the Red SOS alarm button '''3''' times and the device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>NodOn</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NodOn</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Octan Remote</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>CRC-3US-1</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#A simultaneous long press ('''1''' second) on '''O''' and '''<big>–</big>''' will perform this factory reset.<br />
#The LED will flash '''red''' and '''green''' to validate the reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NodOn</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Soft Remote</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>CRC-3US-6</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#A simultaneous long press ('''1''' second) on '''O''' and '''<big>–</big>''' will perform this factory reset.<br />
#The LED will flash '''red''' and '''green''' to validate the reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure.<br />
#The device will be detected and included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Simultaneously push on the '''solid circle''' and the '''<big>+</big>''' for '''1''' second.<br />
#The LED glows in '''pink''' to confirm the selection<br />
#Push on the '''solid circle''' within '''10''' seconds.<br />
#The LED flashes in '''pink''' to confirm your choice and then flashes in '''green''' to confirm the procedure<br />
#The device will be excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>NYCE</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Curtain Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3045-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button '''4''' times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Ceiling Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3043-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the Mounting Plate by rotating the Housing counter-clockwise as shown.<br />
#Inside the battery compartment is a small button on the side of the circuit board.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the Mounting Plate by rotating the Housing counter-clockwise as shown.<br />
#Inside the battery compartment is a small button on the side of the circuit board.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button '''4''' times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Remove the Mounting Plate by rotating the Housing counter-clockwise as shown.<br />
#Inside the battery compartment is a small button on the side of the circuit board.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Motion Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3041-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button 4 times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#To open the battery cover, use a flathead screwdriver in the recessed slot at the bottom of the sensor housing.<br />
#Inside the battery compartment at the top, is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Garage Door (Tilt) Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3014-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide open the Garage Door (Tilt) Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide open the Garage Door (Tilt) Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button 4 times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed, and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Slide open the Garage Door (Tilt) Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>NYCE</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Door/Window Sensor</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>NCZ-3011-HA</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide open the Door/Window Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide open the Door/Window Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Press the button 4 times to join the device to the Zigbee network.<br />
#The LED will flash in the following sequences:<br />
#*'''Yellow - Red - Yellow''' flashes indicate it is searching for a network to join.<br />
#*'''Yellow - Green - Yellow''' flashes indicate the device is being configured.<br />
#*'''3''' Green flashes indicate the device has successfully joined the network.<br />
#*'''3''' Red flashes indicate the devices failed to join the network. If this happens, ensure a factory reset has been performed, and repeat the process from step 4.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Slide open the Door/Window Sensor’s top housing.<br />
#Inside the battery compartment is a small button.<br />
#*'''Note:''' ''The button may be pressed with the end of a paper clip or a pencil. Do not use a sharp object like a tack or pin.''<br />
#Pressing the button '''10''' times will leave the network and reset the device to factory defaults.<br />
#The LED will flash Red '''3''' times to indicate is has left the network (If joined), and it will flash Green '''5''' times to indicate defaults have been restored.<br />
<br />
<hr /><br />
=='''<big>Orbit</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Orbit</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>Smart Hose Faucet Timer</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>27087</big>'''</div><br />
|<div style="text-align: center;">'''<big>Irrigation Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Insert two AA alkaline batteries and re-insert the tray.<br />
#Press the RESET button '''5''' times in rapid secession.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide out the battery tray on the back of the timer.<br />
#Insert two AA alkaline batteries and re-insert the tray.<br />
#*'''NOTE:''' Firmly replace the battery tray to ensure water resistance and increase battery life. You will know the battery tray is fully inserted if it does not pull out easily.<br />
#Turn the dial to '''AUTO'''.<br />
#When batteries are inserted, the timer will automatically attempt to connect and the wireless icon on screen will begin to flash.<br />
#*'''NOTE:''' The timer will remain in pairing mode for '''10''' minutes or until paired'''.''' If pairing is not successful after '''10''' minutes, the timer will stop trying to pair. To enter pairing mode again press the RESET button '''5''' times in rapid secession.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the device details page to confirm proper operation.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#Press the RESET button '''5''' times in rapid secession.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Orbit</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>12-Station Sprinkler Controller</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>27396</big>'''</div><br />
|<div style="text-align: center;">'''<big>Irrigation Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Ensure the controller is connected to power.<br />
#Press the SYNC button '''5''' times in rapid secession.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select Zigbee on the Device Discovery page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Ensure the controller is connected to power.<br />
#Turn the dial to '''AUTO'''.<br />
#When the controller is first connected to power, it will automatically attempt to connect. <br />
#*'''NOTE:''' If pairing is not successful after '''10''' minutes, the controller will stop trying to pair. To re-enter pairing mode, push the 'SYNC' button '''5''' times in rapid succession<br />
#The wireless icon will flash until the controller is paired. Once paired, the wireless icon will remain solid, and the words '''SMART MODE''' will appear on the screen.<br />
#Wait for the device to be added into the system, successful pairing will be confirmed by Hubitat Elevation™<br />
#Watch the status in the <nowiki/>device details page to confirm proper operation<br />
<br />
'''Leaving the Zigbee Netwo'''<nowiki/>'''rk'''<br />
<br />
#From the device's detail<nowiki/>s page, select '''Remove Device''', then '''Remove'''.<br />
#Press the RESET button '''5'''<nowiki/> times in rapid secession. The device will try to re-connect again, so you will need to let it time out or hold the SYNC button for '''5''' seconds to cancel re-pairing.<br />
<hr /><br />
<br />
=='''<big>Orvibo</big>'''==<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Obvibo</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>SN11</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold down the reset button on the front of the motion sensor until the '''Green light''' goes out.<br />
#This will disconnect the sensor from the Zigbee network.<br />
#Short-press the reset button and the '''Green light''' will flash slowly.<br />
#The sensor is now in pairing mode.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the cover by rotating it counterclockwise<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold down the reset button on the front of the motion sensor until the '''Green light''' goes out.<br />
#This will disconnect the sensor from the Zigbee network.<br />
#Short-press the reset button and the '''Green light''' will flash slowly.<br />
#The sensor is now in pairing mode.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold down the reset button on the front of the motion sensor until the '''Green light''' goes out.<br />
#This will disconnect the sensor from the Zigbee network.<br />
<br />
<hr /><br />
=='''<big>OSRAM</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Osram</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lightify Flex RGBW</big>'''</div><br />
|<div style="text-align: center;">'''<big>73698</big>'''</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat '''5''' times - Unplug for '''1''' second and then plug in for '''1''' second<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat 5 times - Unplug for '''1''' second and then plug in for '''1''' second<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat 5 times - Unplug for '''1''' second and then plug in for '''1''' second<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
<hr /><br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Osram</big>'''</div><br />
|<div style="text-align: center;">'''<big>All smart bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the light off<br />
#Turn the light on for three '''3''' seconds<br />
#Turn the light off<br />
#Repeat this cycle '''5''' times<br />
#Wait 10 seconds for the light to flash '''3''' times<br />
#Repeat these steps if the light does not flash three times<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the light off<br />
#Turn the light on for three '''3''' seconds<br />
#Turn the light off<br />
#Repeat this cycle '''5''' times<br />
#Wait 10 seconds for the light to flash '''3''' times<br />
#Repeat these steps if the light does not flash '''3''' times<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the light off<br />
#Turn the light on for three '''3''' seconds<br />
#Turn the light off<br />
#Repeat this cycle '''5''' times<br />
#Wait 10 seconds for the light to flash '''3''' times<br />
#Repeat these steps if the light does not flash '''3''' times<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Osram</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Outdoor Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>G11028081</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
'''NOTE:''' ''Reset method may vary by firmware version''<br />
<br />
'''Method 1'''<br />
<br />
#Hold the button for '''30''' seconds<br />
#The outdoor plug will click '''5''' times<br />
#The outdoor plug is now reset and ready for pairing<br />
<br />
'''Method 2'''<br />
<br />
#Turn the outdoor plug off<br />
#Turn the outdoor plug on for three '''5''' seconds<br />
#Turn the outdoor plug off<br />
#Repeat this cycle '''5''' times<br />
#The outdoor plug is now reset and ready for pairing<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#See factory reset instructions above to reset the outdoor plug and ready it for pairing . The required steps will vary by firmware version.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#See factory reset instructions above. The required steps will vary by firmware version.<br />
<br />
<hr /><br />
=='''<big>Philips Hue</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>046677553715</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the smart button over and remove the back cover. Use a straightened paperclip to press the '''setup''' button on the back for 5 seconds. An LED on the front of the sensor will flash once to confirm factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Turn the smart button over and remove the back cover. Use a straightened paperclip to press the '''setup''' button on the back for 5 seconds. An LED on the front of the sensor will flash once to confirm reset.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button until the LED on the front of the button is flashing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the smart button over and remove the back cover. Use a straightened paperclip to press the '''setup''' button on the back for 5 seconds. An LED on the front of the sensor will flash once to confirm factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>73698</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the dimmer switch over and use a straightened paperclip to press the '''setup''' button on the back for '''1''' second.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the dimmer switch over and use a straightened paperclip to press the '''setup''' button on the back for '''1''' second.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the dimmer switch over and use a straightened paperclip to press the '''setup''' button on the back for '''1''' second.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>473389</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#On the back of the motion sensor, and use a straightened paperclip to press the '''setup''' button for '''1''' second.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#On the back of the motion sensor, and use a straightened paperclip to press the '''setup''' button for '''1''' second.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#On the back of the motion sensor, and use a straightened paperclip to press the '''setup''' button for '''1''' second.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>046677552343</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the power button for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press the power button for '''10''' seconds to factory reset the smart plug.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the power button for '''10''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Philips Hue</big>'''</div><br />
|<div style="text-align: center;">'''<big>All Hue Lights</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#You must use a Hue Dimmer to factory reset a Hue bulb, light fixture or LED strip that is not attached to a Hue bridge.<br />
#Turn on the light on to be reset, ensuring other bulbs within a few inches are unscrewed or unplugged or they may be reset too.<br />
#Hold the remote within '''4''' inches of the light.<br />
#Press and hold the 1st (On / I in some countries) and the and 4th (Off / O in some countries) buttons simultaneously for about '''10''' seconds, until the light starts flashing on and off.<br />
#When the light stops flashing, it will remain ON at full brightness, and the green LED on the remote will flash green, indicating the bulb has been factory reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Using a Hue dimmer, factory reset the light as described above.<br />
#Disconnect the light from mains power.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power on the light<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Using a Hue dimmer, factory reset the light as described above.<br />
<br />
<hr /><br />
=='''<big>Powerly</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Powerly</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To reset to factory defaults, turn the thermostat off by pressing '''Mode''' repeatedly until OFF scrolls across the display.<br />
#Press and hold the '''down''' and '''up''' Setpoint arrows at the same time for '''5''' seconds.<br />
#If successful, '''RESET''' will scroll across the display and the device will be restored to its default settings.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To put your thermostat into inclusion mode, press and hold '''Mode''' for '''5''' seconds.<br />
#'''CONNECT''' will scroll across the thermostat display once in inclusion mode.<br />
#'''SUCCESS''' will scroll across the thermostat display once included, but '''FAIL''' will scroll across the thermostat display if inclusion is unsuccessful,<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#To exclude your Thermostat, press and hold '''Mode''' for '''5''' seconds to initiate the Z-Wave exclusion process.<br />
#'''DELETE''' will scroll across the thermostat display once in exclusion mode. If you need to cancel the exclusion process, press '''Mode'''.<br />
#To complete exclusion, press either the up or down arrow.<br />
#'''SUCCESS''' will scroll across the thermostat display once excluded.<br />
<hr /><br />
=='''<big>Qubino</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush 1 Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHAD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''5''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''5''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush 1D Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHND3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''5''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush 2 Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHBD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush Shutter DC</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHOD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''3''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush Shutter</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHCD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush ON/OFF Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHID3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''5''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than '''6''' seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal '''3''' times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Flush Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHDD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''3''' seconds ('''5''' times change switch state).<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button for more than 6 seconds.<br />
<br />
*'''NOTE:''' ''By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply (with the temperature sensor already connected*).<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds. The device has to get On/Off signal 3 times, meaning '''3''' times push on the push button or '''6''' times flip of a switch.<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between '''2-6''' seconds<br />
<br />
*'''NOTE:''' *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch connected to the I1 terminal '''3''' times within '''3''' seconds<br />
#*If the device is powered by 24 V SELV supply, press and hold the S (Service) button between<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Qubino</big>'''</div><br />
|<div style="text-align: center;">'''<big>Mini Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZMNHHD3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Connect the device to the power supply.<br />
#Within the first '''60''' seconds the device is connected to the power supply, toggle the switch connected to the I1 terminal '''5''' times within '''3''' seconds.<br />
#Alternatively, press and hold the '''S''' (Service) button for at least '''6''' seconds if connected to 24-30VDC<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Connect the device to the power supply.<br />
#Toggle the switch connected to the I1 terminal 3 times within 3 seconds (this procedure puts the device in LEARN MODE).<br />
#Alternatively, press and hold the S (Service) button between 2~6 seconds if connected to 24-30VDC to put the device in LEARN MODE).<br />
<br />
*'''NOTE:''' Inclusion with the switch connected to I1 terminal is not limited by time.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Connect the device to the power supply.<br />
#Toggle the switch connected to the I1 terminal 3 times within 3 seconds (this procedure puts the device in LEARN MODE).<br />
#Alternatively, press and hold the S (Service) button between 2~6 seconds if connected to 24-30VDC to put the device in LEARN MODE).<br />
<br />
*'''NOTE:''' Exclusion with the switch connected to I1 terminal is not limited by time.<br />
<br />
<hr /><br />
=='''<big>Quotra</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Quotra</big>'''</div><br />
|<div style="text-align: center;">'''Wireless Smart Dimmer'''</div><br />
|<div style="text-align: center;"><br />
'''<big>B07CVL9SZF</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the power button for '''10''' seconds.<br />
#Rlease when the LED slowly fades in and out (this will only happen for 3 seconds).<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the power button for '''10''' seconds.<br />
#Rlease when the LED slowly fades in and out (this will only happen for 3 seconds).<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the power button for '''10''' seconds.<br />
#Rlease when the LED slowly fades in and out (this will only happen for 3 seconds).<br />
<br />
<hr /><br />
=='''<big>Radio Thermostat Company of America</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Radio Thermostat Company of America</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>CT-101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#The thermostat must be in OFF mode.<br />
#Wait until the radio wave icons on the left side of the screen stop flashing then touch the screen once to turn on the back light and then hold the center of the screen for about '''8''' seconds until the thermostat beeps.<br />
<br />
'''Factory Reset''' '''(Alternate Method)'''<br />
<br />
#Place the CT101 in the off position by pressing mode button until '''OFF''' is shown at the top left of the screen.<br />
#Press the menu button<br />
#Press and hold the center of the screen for about 5 sec or until the screen changes then release.<br />
#You will see two arrows. First press the up arrow and wait for the count down.<br />
#Now press the down arrow and again, wait for the count down.<br />
#All parameter values will be restored to defaults and a message is sent to any radio module installed to instruct the module to restore its own default values.<br />
#*The thermostat will now resets itself.<br />
#Press the house to get back to the main screen.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press/Touch the MATE button on the MENU screen. A large '''r1''' will be displayed.<br />
#This will bring you to the network include screen. Confirm by touching MATE again to initiate the mating process. The MATE icon and the status indicator LEDs will flash.<br />
#When a device has joined a network the LINK icon will appear under the radio tower.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press/Touch the MATE button on the MENU screen. A large '''r1''' will be displayed.<br />
#This will bring you to the network include screen. Confirm by touching MATE again to initiate the mating process. The MATE icon and the status indicator LEDs will flash.<br />
#When a device has excluded from the network, the LINK icon will disappear under the radio tower.<br />
<br />
<hr /><br />
=='''<big>Remotec</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Remotec</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay / Fixture Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZFM-80US/DA065</big>'''</div><br />
|<div style="text-align: center;">'''<big>Relay</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Factory reset is accomplished by excluding the device from the Z-Wave netowrk<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click once on the PROG button or and external attached switch.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Click once on the PROG button or and external attached switch.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click once on the PROG button or and external attached switch.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Remotec</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZRC-90 Scene Master</big>'''</div><br />
|<div style="text-align: center;">'''<big>REMEZRC90</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and keep holding '''R''' button not less than '''10''' seconds.<br />
#Release '''R''' button then triple click on the same '''R''' button within 2 seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press '''L''' & '''R''' buttons simultaneously until the LED lights up to add the device to the Z-Wave network. The LED will keep flashes slowly.<br />
#Press the program button. The LED will flash once, then remain off if the device is included into the Z-Wave network.<br />
#If the LED flashes '''6''' times rapidly, then remains off, the device has failed to be included in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Click once on the '''R''' button to remove the device from the Z-Wave network. The LED will continue flashing slowly.<br />
#Press the program button. The LED will flash once, then remain off if the device is excluded from the Z-Wave network.<br />
#If the LED flashes '''6''' times rapidly, then remains off, the device has failed to be excluded in the Z-Wave network.<br />
#Perform a factory reset and repeat the above steps to exclude the device from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>RGBgenie</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>4 Channel Dimming Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-1003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly 5 times.<br />
#The LED will flash quickly and then stay in a slow rhythmic breathing pattern to indicate a successful reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly 5 times.<br />
#The LED will flash quickly and then stay in a slow rhythmic breathing pattern to indicate a successful reset and the device is ready for pairing.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Color controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-1025</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly '''5''' times.<br />
#The LED will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Press the program button quickly '''5''' times, or if the unit is not accessible, power the device off and on quickly '''5''' times.<br />
#The LED will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single color remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-5121</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the middle (Light ON) button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGB color remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-5122</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the middle (Light ON) button.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the middle (Light ON) button.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Monochrome controller panel</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-3026</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold down the power button on the Touch Panel until the LED indicator turns on.<br />
#Immediately press the power button '''5''' times.<br />
#The LED indicator will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the '''power button''' until the LED status indicator turns on.<br />
#Immediately press the '''S1''' button once to enable the Touch Panel to search for nearby networks. The LED indicator will flash once every second.<br />
<br />
'''Verifying network pairing'''<br />
<br />
#Quickly press any button and the LED indicator should flash once.<br />
#If the LED indicator does not respond, the Touch Panel is not paired with a network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single Channel Trailing Edge Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-4002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Single Channel Micro Controller and Lamp Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-4003</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Short press the '''Reset''' button '''5''' times in a row, or if the button is not accessible, power cycle the device '''5''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>3 Zone Color Touch Panel</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-5027</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold down the power button on the Touch Panel until the LED indicator turns on.<br />
#Immediately press the power button '''5''' times.<br />
#The LED indicator will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the '''power button''' until the LED status indicator turns on.<br />
#Immediately press the '''S1''' button once to enable the Touch Panel to search for nearby networks. The LED indicator will flash once every second.<br />
<br />
'''Verifying network pairing'''<br />
<br />
#Quickly press any button and the LED indicator should flash once.<br />
#If the LED indicator does not respond, the Touch Panel is not paired with a network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Color Remote</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZB-5028</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold down the power button on the Touch Panel until the LED indicator turns on.<br />
#Immediately press the power button '''5''' times.<br />
#The LED indicator will flash '''3''' times quickly to indicate successful removal from the network and is now reset to factory default.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the '''power button''' until the LED status indicator turns on.<br />
#Immediately press the '''S1''' button once to enable the Touch Panel to search for nearby networks. The LED indicator will flash once every second.<br />
<br />
'''Verifying network pairing'''<br />
<br />
#Quickly press any button and the LED indicator should flash once.<br />
#If the LED indicator does not respond, the Touch Panel is not paired with a network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Color controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-1001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold down Inclusion/Exclusion button for over '''10''' seconds<br />
#The connected LED light will stays ON solid for '''3''' seconds to indicate successful factory reset<br />
#Release Inclusion/Exclusion button and all 4 PWM outputs will restore to 50% brightness.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power on the LED dimmer<br />
#If the connected LED light has a solid ON status, it means the LED dimmer has already been included into a network and you first you have to set the LED dimmer into '''Exclusion''' mode.<br />
#Once excluded, it will be set into '''Inclusion''' mode automatically, and waiting to be included in the Z-Wave network.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple press the “inclusion/exclusion” button<br />
#The LED dimmer will be set to '''Exclusion''' mode and the connected LED light will flash quickly for 6 seconds<br />
#The LED light will stay ON solid for '''3''' seconds to indicate successful exclusion.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Color controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-1002</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold down Inclusion/Exclusion button for over '''10''' seconds<br />
#The connected LED light will stays ON solid for '''3''' seconds to indicate successful factory reset<br />
#Release Inclusion/Exclusion button and all 4 PWM outputs will restore to 50% brightness.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power on the LED dimmer<br />
#If the connected LED light has a solid ON status, it means the LED dimmer has already been included into a network and you first you have to set the LED dimmer into '''Exclusion''' mode.<br />
#Once excluded, it will be set into '''Inclusion''' mode automatically, and waiting to be included in the Z-Wave network.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Triple press the “inclusion/exclusion” button<br />
#The LED dimmer will be set to '''Exclusion''' mode and the connected LED light will flash quickly for 6 seconds<br />
#The LED light will stay ON solid for '''3''' seconds to indicate successful exclusion.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>RGBgenie</big>'''</div><br />
|<div style="text-align: center;">'''<big>Micro controller and Lamp Module</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZW-4001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
<br />
'''Factory Reset'''<br />
<br />
#Press and hold down '''Reset''' button for over '''10''' seconds<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Power on the micro controller<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''Reset''' button '''3''' times quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''Reset''' button '''3''' times quickly.<br />
<br />
<hr /><br />
<br />
=='''<big>Ring</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Range Extender v1</big>'''</div><br />
|<div style="text-align: center;">'''<big>4AR1S70EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Repeater</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the Range Extender.<br />
#Press and hold the button on the right side of the device. The LED on the device will flash rapidly.<br />
#When the LED begins to flash slowly, release the button.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the right side of the device to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button on the right side of the device to '''Exclude''' the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Contact Sensor v1</big>'''</div><br />
|<div style="text-align: center;">'''<big>4SD1S70EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Open the contact sensor cover.<br />
#Remove the battery from the device.<br />
#Press and hold the tamper switch while reinstalling the battery.<br />
#The LED will be flashing. Keep holding the tamper switch until the LED turns off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the contact sensor cover.<br />
#Quickly remove and replace the battery to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Open the contact sensor cover.<br />
#Quickly remove and replace the battery to '''Exclude''' the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Motion Sensor v1</big>'''</div><br />
|<div style="text-align: center;">'''<big>4SP1S70EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Insert a straightened paper clip into the pinhole at the back of the motion detector.<br />
#Press and hold the reset button.<br />
#The LED will be flashing. Keep holding the reset button until the LED turns off.<br />
#Open the motion sensor cover.<br />
#Quickly remove and replace the battery to complete factory reset of the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the motion sensor cover.<br />
#Quickly remove and replace the battery to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Open the motion sensor cover.<br />
#Quickly remove and replace the battery to '''Exclude''' the device from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Ring</big>'''</div><br />
|<div style="text-align: center;">'''<big>Ring Alarm Smoke/CO Listener</big>'''</div><br />
|<div style="text-align: center;">'''<big>4SS1S80EN0</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke/CO Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold the setup button on the side of the device for '''10''' seconds.<br />
#When the LED stops flashing, the device has been factory reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Open the Smoke/CO Listener cover.<br />
#Quickly remove and replace the battery.<br />
#Press the setup button on the side of the device to begin '''Inclusion''' to the Z-Wave network.<br />
<br />
'''Leaving the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Open the Smoke/CO Listener cover.<br />
#Quickly remove and replace the battery.<br />
#Press the setup button on the side of the device to '''Exclude''' it from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>SAGE</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SAGE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Doorbell Sensor</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Doorbell Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the plastic cover and the battery.<br />
#Press and hold the tiny RESET button (next to where the wires attach to the circuit board) while you reinstall the battery.<br />
#Continue holding RESET until the Red LED flashes.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the plastic cover and the battery.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the tiny RESET button (next to where the wires attach to the circuit board) while you reinstall the battery.<br />
#Continue holding RESET until the Red LED flashes.<br />
#If the device is not discovered by Hubitat Elevation™, then move the device closer to the hub and try again. It should now be discovered by the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Remove the plastic cover and the battery.<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the tiny RESET button (next to where the wires attach to the circuit board) while you reinstall the battery.<br />
#Continue holding RESET until the Red LED flashes.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SAGE</big>'''</div><br />
|<div style="text-align: center;">'''<big>Light Switch Controller</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Light Switch Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery from the light switch.<br />
#Press and hold the rocker switch in the '''ON''' position as you reinstall the battery.<br />
#Continue to hold the switch in the '''ON''' position until the Red LED flashes.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Remove the battery from the light switch.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the rocker switch in the '''ON''' position as you reinstall the battery.<br />
#Continue to hold the switch in the '''ON''' position until the Red LED flashes.<br />
#If the device is not discovered by Hubitat Elevation™, then move the device closer to the hub and try again. It should now be discovered by the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Remove the battery from the light switch.<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the rocker switch in the '''ON''' position as you reinstall the battery.<br />
#Continue to hold the switch in the '''ON''' position until the Red LED flashes.<br />
<br />
<hr /><br />
=='''<big>Salus</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Salus</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;">'''<big>SP-600</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the button on the outlet for '''10''' seconds.<br />
#The light surrounding the button will flash Red '''5''' times, and will then go out.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button on the outlet for '''10''' seconds.<br />
#The light surrounding the button will flash Red '''5''' times, and will then go out.<br />
#If the device is not discovered by Hubitat Elevation™, then unplug the outlet for 10 seconds and plug it in again. It should now be discovered by the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button on the outlet for '''10''' seconds.<br />
#The light surrounding the button will flash Red '''5''' times, and will then go out.<br />
<br />
<hr /><br />
=='''<big>Samsung SmartThings</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet 2017</big>'''</div><br />
|<div style="text-align: center;">'''<big>F-OUT-US-2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED starts flashing '''Blue'''.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the Outlet is within '''15''' feet ('''4.5''' meters) of the hub during setup.<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED starts flashing '''Blue'''.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED starts flashing '''Blue'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-OTP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED flashes '''Blue''' 3 times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED flashes '''Blue''' 3 times'''.'''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button for '''5''' seconds, and release it when the LED flashes '''Blue''' 3 times.<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-BTP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing '''Red'''.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5 seconds.'''<br />
#Release the button when the LED starts flashing '''Red.'''<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing '''Red'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-MTP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash red and green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Sensor V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-WLP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Samsung SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor V5</big>'''</div><br />
|<div style="text-align: center;">'''<big>IM6001-MPP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash red and green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
=='''<big>Schlage</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Schlage</big>'''</div><br />
|<div style="text-align: center;">'''<big>LiNK Deadbolt</big>'''</div><br />
|<div style="text-align: center;">'''<big>BE-369</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Disconnect the 9V battery.<br />
#On the lock keypad, press and release the Schlage button.<br />
#Reconnect the battery and wait until the Schlage button is no longer lit.<br />
#Within '''10''' seconds, press and hold the '''Schlage button''' until it lights Green and the lock beeps.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Schlage</big>'''</div><br />
|<div style="text-align: center;">'''<big>LiNK Deadbolt</big>'''</div><br />
|<div style="text-align: center;">'''<big>FE-599</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Disconnect the 9V battery.<br />
#On the lock keypad, press and release the Schlage button.<br />
#Reconnect the battery and wait until the Schlage button is no longer lit.<br />
#Within '''10''' seconds, press and hold the '''Schlage button''' until it lights Green and the lock beeps.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the '''6''' digit programming code.<br />
#Wait for the Schlage button will flash Amber '''3''' times'''.''' It will be accompanied by '''3''' beeps.<br />
#Press the '''Schlage button''' and the '''0''' key.<br />
#If successful, the '''Schlage button''' will be flashing Amber'''.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Schlage</big>'''</div><br />
|<div style="text-align: center;">'''<big>Connect Deadbolt</big>'''</div><br />
|<div style="text-align: center;">'''<big>BE-468 / BE-469</big>'''</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Disconnect the batteries<br />
#Press and hold the outside Schlage button<br />
#While holding the outside Schlage button, then reconnect the batteries.<br />
#Release the Outside Schlage Button. '''NOTE: If you are moving the lock to a new door, install the lock on that door before continuing.'''<br />
#To check that the lock was reset, press the outside Schlage button and enter one of the Default User Codes.<br />
#If the reset was successful, the lock will perform a setup routine. Wait until the bolt stops moving. The reset and setup are complete.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Schlage button.<br />
#Enter the '''6''' digit programming code.<br />
#Press '''0'''<br />
#A '''√''' indicates the lock successfully joined the Z-Wave network, while an '''X''' indicates that it did not successfully join the network.<br />
<br />
'''Verify Z-Wave connection status from the lock'''<br />
<br />
#Remove the battery cover.<br />
#Disconnect the battery connector.<br />
#While watching the inside Schlage button, reconnect the battery connector.<br />
#The inside Schlage button will flash if the lock is enrolled.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Schlage button.<br />
#Enter the '''6''' digit programming code.<br />
#Press '''0'''<br />
#A '''√''' indicates the lock was successfully excluded the Z-Wave network, while an '''X''' indicates that it did not successfully leave the network.<br />
<br />
<hr /><br />
=='''<big>Sengled</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Element Bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Power cycle on and off '''15''' times, '''VERY''' quickly, ending on the ON position.<br />
#*'''NOTE:''' An on and off cycle counts as '''1'''<br />
#If successful, the bulb will flash '''5''' times, and will then be in pairing mode.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Power cycle on and off '''15''' times, '''VERY''' quickly, ending on the ON position.<br />
#*'''NOTE:''' An on and off cycle counts as '''1'''<br />
#If successful, the bulb will flash '''5''' times, and will then be in pairing mode.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Power cycle on and off '''15''' times, '''VERY''' quickly, ending on the ON position.<br />
#*'''NOTE:''' An on and off cycle counts as '''1'''<br />
#If successful, the bulb will flash '''5''' times, and will then be in pairing mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Window and Door Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>E1D-G73WNA</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#To reset the sensor, use the provided tool, or something equally thin like a paper clip.<br />
#Press and hold the reset button inside the unit for '''8''' seconds.<br />
#If successful, a Red light on the face of the sensor will flash '''2''' times'''.'''<br />
#*'''NOTE:''' After the sensor is reset, you will have one minute to add it to your hub.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#To reset the sensor, use the provided tool, or something equally thin like a paper clip.<br />
#Press and hold the reset button inside the unit for '''8''' seconds.<br />
#If successful, a Red light on the face of the sensor will flash '''2''' times.<br />
#*'''NOTE:''' After the sensor is reset, you will have one minute to add it to your hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#To reset the sensor, use the provided tool, or something equally thin like a paper clip.<br />
#Press and hold the reset button inside the unit for '''8''' seconds.<br />
#If successful, a Red light on the face of the sensor will flash '''2''' times.<br />
#*'''NOTE:''' After the sensor is reset, you will have one minute to add it to your hub.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi-Color Light Strip</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>E1G-G8E</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''.<br />
<br />
#Press and hold the reset button inside the unit for '''10''' seconds.<br />
#If successful, the light strip will flash '''5''' times'''.'''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the reset button inside the unit for '''10''' seconds.<br />
#If successful, the light strip will flash '''5''' times'''.'''<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the reset button inside the unit for '''10''' seconds.<br />
#If successful, the light strip will flash '''5''' times'''.'''<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sengled</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>E1C-NB6</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''.<br />
<br />
#Press and hold the power button for '''15''' seconds.<br />
#If successful '''Blue''' indicator light will stay on briefly, and then slowly pulse on and off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold the power button for '''15''' seconds.<br />
#If successful '''Blue''' indicator light will stay on briefly, and then slowly pulse on and off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold the power button for '''15''' seconds.<br />
#If successful '''Blue''' indicator light will stay on briefly, and then slowly pulse on and off.<br />
<br />
<hr /><br />
=='''<big>Sensative</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sensative Strips</big>'''</div><br />
|<div style="text-align: center;">'''<big>Guard</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Move magnet all the way to the rounded edge, You should see '''1''' short LED flash'''.'''<br />
#Move magnet towards center 2 times. You should see '''2''' LED flashes.<br />
#On the last pass, leave at rounded edge for '''10''' seconds.<br />
#*If successful, you should see '''1''' long LED flash.<br />
#*If you do not see any flashes, then the reset process was not completed successfully.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Keep Strips close to its intended location during the add process.<br />
#Remove both magnets. '''1''' long flash confirms proper inclusion to the Z-Wave network.<br />
#Move the squared magnet away from the squared end and watch the status in the Hubitat Elevation™ device details to ensure proper functionality.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove both magnets. '''1''' long flash confirms proper exclusion to the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sensative Strips</big>'''</div><br />
|<div style="text-align: center;">'''<big>Drip</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Place magnet 2cm from the rounded edge for '''2''' seconds. You should see '''1 short''' LED flash.<br />
#Move between logo and the round edge '''2''' times.<br />
#On the second pass, leave the magnet here for '''10''' seconds and wait for '''1 long''' LED flash.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Move the Magnet towards the rounded edge until you see '''2''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, inclusion to the Z-wave network was successful.<br />
#If you see '''5 short''' LED flashes, then inclusion has failed and you should perform a factory reset, then repeat the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Move the magnet towards the rounded edge until '''1''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, it indicates sucessful exclusion from the Z-Wave network.<br />
#If you see '''5 short''' LED flashes, then exclusion has failed and you should perform a factory reset, then repeat the exclusion process.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sensative Strips</big>'''</div><br />
|<div style="text-align: center;">'''Comfort'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Temperature Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Place magnet 2cm from the rounded edge for '''2''' seconds. You should see '''1 short''' LED flash.<br />
#Move between logo and the round edge '''2''' times.<br />
#On the second pass, leave the magnet here for '''10''' seconds and wait for '''1 long''' LED flash.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Move the Magnet towards the rounded edge until you see '''2''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, inclusion to the Z-wave network was successful.<br />
#If you see '''5 short''' LED flashes, then inclusion has failed and you should perform a factory reset, then repeat the inclusion process.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Move the magnet towards the rounded edge until '''1''' LED flashes.<br />
#Move magnet between logo and rounded edge slowly '''2''' times.<br />
#Remove the magnet. If you see '''1''' LED flash, it indicates sucessful exclusion from the Z-Wave network.<br />
#If you see '''5 short''' LED flashes, then exclusion has failed and you should perform a factory reset, then repeat the exclusion process.<br />
<br />
<hr /><br />
=='''<big>Shelly</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Shelly</big>'''</div><br />
|<div style="text-align: center;">'''<big>WiFi Dimmer</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button for 10 seconds.<br />
#When the LED indicator starts to flash quickly, release the button and your device should return to AP Mode.<br />
<br />
'''Join the LAN'''<br />
<br />
#In the Preferences field of the driver, enter the IP address of your Shelly device.<br />
#*'''NOTE:''' You should reserve the IP address for your Shelly WiFi devices in your router, just as you do for your Hubitat Elevation™ hub. If you do not, the IP address will change when the DHCP lease on your router expires for connected IP devices. The result will be that the Shelly driver will no longer be able to find your device.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button for 10 seconds.<br />
#When the LED indicator starts to flash quickly, release the button and your device should return to AP Mode.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Shelly</big>'''</div><br />
|<div style="text-align: center;">'''<big>WiFi Switch</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch. You will hear the relay trigger itself.<br />
#After the relay makes a triggering sound, the switch should return to AP Mode.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button on the back of the device for 10 seconds.<br />
#Your device should return to AP Mode.<br />
<br />
'''Join the LAN'''<br />
<br />
#In the Preferences field of the driver, enter the IP address of your Shelly device.<br />
#*'''NOTE:''' You should reserve the IP address for your Shelly WiFi devices in your router, just as you do for your Hubitat Elevation™ hub. If you do not, the IP address will change when the DHCP lease on your router expires for connected IP devices. The result will be that the Shelly driver will no longer be able to find your device.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#If the Device has been powered on, power it off and then on again.<br />
#After turning the power on, you have 60 seconds to press 5 consecutive times on a connected switch.<br />
#Alternatively, if you have physical access to the Device, press and hold the reset button for 10 seconds.<br />
#When the LED indicator starts to flash quickly, release the button and your device should return to AP Mode.<br />
<br />
<hr /><br />
=='''<big>Sinope</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee Thermostats</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Simultaneously press the '''UP''' and '''DOWN''' arrow buttons for '''10''' seconds<br />
#On the thermostat display, the radio signal icon will disappear.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously press the '''UP''' and '''DOWN''' arrow buttons to initiate device paring.<br />
#On the thermostat display, a radio signal icon will flash while connecting, and will remain solid once connected to the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Simultaneously press the '''UP''' and '''DOWN''' arrow buttons for '''10''' seconds.<br />
#On the thermostat display, the radio signal icon will disappear.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Small Electrical Load Controller</big>''' </div><br />
|<div style="text-align: center;"><br />
'''<big>RM3250ZB</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the button next to the '''radio signal''' icon for '''10''' seconds.<br />
#On the device, the LED next to the radio signal icon will turn off.<br />
#All settings will be reset to factory defaults.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button next to the '''radio signal''' icon to initiate device paring.<br />
#On the device, the LED next to the radio signal icon will flash while connecting, and will remain solid once connected to the hub.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button next to the '''radio signal''' icon for '''10''' seconds.<br />
#On the device, the LED next to the radio signal icon will turn off.<br />
#All settings will be reset to factory defaults.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Detector</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>WL4200</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Press the '''Link''' button to initiate device paring.<br />
#*The LED will flash Green while connecting.<br />
#*The LED will remain solid Green for '''10''' seconds upon sucessful connection.<br />
#*If the LED is flashing Red, the connection has failed.<br />
#Test the sensor by exposing the electrodes to a damp cloth and observing the device status on Hubitat Elevation™<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Detector</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>WL4200S</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Press the '''Link''' button to initiate device paring.<br />
#*The LED will flash Green while connecting.<br />
#*The LED will remain solid Green for '''10''' seconds upon sucessful connection.<br />
#*If the LED is flashing Red, the connection has failed.<br />
#Test the sensor by exposing the electrodes to a damp cloth and observing the device status on Hubitat Elevation™<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press the '''Link''' button for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Valve</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>VA4200WZ</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Ensure the switch is set to position '''3''' (Zigbee connection)<br />
#Plug the valve power adapter into an AC outlet.<br />
#Simultaneously press buttons '''A and B''' for '''10''' seconds.<br />
#The LED will '''flash GREEN'''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Ensure the switch is set to position '''3''' (Zigbee connection)<br />
#Plug the valve power adapter into an AC outlet.<br />
#Press the A button to initiate device paring<br />
#*The LED will flash Green while connecting<br />
#*The LED will remain solid Green for '''10''' seconds upon sucessful connection<br />
#*If the LED is flashing Red, the connection has failed.<br />
#Test the valve by toggling '''Open''' and '''Close''' in the device detail page on Hubitat Elevation™, and observe that the valve properly opens and closes in response to the pressing to the Open and Close buttons.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Ensure the switch is set to position '''3''' (Zigbee connection)<br />
#Plug the valve power adapter into an AC outlet.<br />
#Simultaneously press buttons '''A and B''' for '''10''' seconds.<br />
#The LED will flash Green.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>DM2500ZB</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Simultaneously press the up and down dimmer buttons for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously press the up and down dimmer buttons for '''1''' second.<br />
#*The LED will flash Blue while connecting<br />
#*The LED with flash Green when connected.<br />
#*If the LED is flashing Red, the connection has failed.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Simultaneously press the up and down dimmer buttons for '''10''' seconds.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sinope</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>SW2500ZB</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Simultaneously press the ON and OFF buttons for '''10''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Simultaneously press the ON and OFF buttons for '''1''' second.<br />
#*The LED will flash Blue while connecting<br />
#*The LED with flash Green when connected.<br />
#*If the LED is flashing Red, the connection has failed.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Simultaneously press the ON and OFF buttons for '''10''' seconds.<br />
<br />
<hr /><br />
<br />
=='''<big>SmartThings</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3300-S</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
#The LED will flash Red and Green while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the recessed connect button for '''5''' seconds.<br />
#Release the button when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Multi Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>STSS-MULT-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button for '''6''' seconds, or until the LED light turns off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the Outlet is within '''15''' feet ('''4.5''' meters) of the hub during setup.<br />
#Hold the '''Connect''' button for '''6''' seconds, or until the LED light turns off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button for '''6''' seconds, or until the LED light turns off.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor (2015 Model)</big>'''</div><br />
|<div style="text-align: center;">'''<big>F-SS-MULT-001</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor (2016 Model)</big>'''</div><br />
|<div style="text-align: center;">'''<big>F-MLT-US-2</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover and hold the '''Connect''' button for '''5 seconds.'''<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multi Sensor v4</big>'''</div><br />
|<div style="text-align: center;">'''<big>STS-MLT-250</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Humidity Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>3310-S</big>'''</div><br />
|<div style="text-align: center;">'''<big>Humidity Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove the cover, and then the battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Slide the sensor off the mount, remove the cover, and then the battery.<br />
#While holding down the reset button, reinsert battery<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove the cover, and then the battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Moisture Sensor</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Moisture Sensor.<br />
#Remove the CR2 battery by pulling the ribbon.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Moisture Sensor.<br />
#Remove the CR2 battery by pulling the ribbon.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Moisture Sensor.<br />
#Remove the CR2 battery by pulling the ribbon.<br />
#Hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Leak Sensor v4 (2015)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Water Leak Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Water Leak Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Water Leak Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold the Connect button for '''6''' seconds or until the LED light turns off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold the Connect button for '''6''' seconds or until the LED light turns off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold the Connect button for '''6''' seconds or until the LED light turns off.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor v2 (2014)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor v3 (2015)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
#The LED will flash Blue while attempting to connect.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover of the Motion Sensor.<br />
#Remove the battery, then hold the '''Connect''' button while inserting the battery.<br />
#Release the button once the LED is lit.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor v4 (2016)</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release it when the LED starts flashing Red.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>SmartSense Presence Sensor v2</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Presence Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Insert a small flathead screwdriver into the groove at the base of the SmartSense Presence Sensor<br />
#Gently twist the screwdriver and the plastic case should pop open.<br />
#Hold the '''Connect''' button on the sensor for about '''6''' seconds until the LED light turns off, and then release.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Insert a small flathead screwdriver into the groove at the base of the SmartSense Presence Sensor<br />
#Gently twist the screwdriver and the plastic case should pop open.<br />
#Hold the '''Connect''' button on the sensor for about '''6''' seconds until the LED light turns off, and then release.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Insert a small flathead screwdriver into the groove at the base of the SmartSense Presence Sensor<br />
#Gently twist the screwdriver and the plastic case should pop open.<br />
#Hold the '''Connect''' button on the sensor for about '''6''' seconds until the LED light turns off, and then release.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>SmartThings</big>'''</div><br />
|<div style="text-align: center;">'''<big>Arrival Sensor v4</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Presence Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release the button when the LED turns off.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release the button when the LED turns off.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the cover and hold the '''Connect''' button for '''5''' seconds.<br />
#Release the button when the LED turns off.<br />
<br />
<hr /><br />
=='''<big>Sunricher</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sunricher</big>'''</div><br />
|<div style="text-align: center;">'''<big>Wall mounted controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZG2833K8_EU05</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold down the two top buttons until the LED lights up solid.<br />
#Immiediatley press the second button from the top, on the left side of the controller '''5''' times.<br />
#The LED will flash '''3''' times to indicate a sucessful reset of the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Hold down the two top buttons until the LED lights up solid.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the second button from the top, on the rightside of the controller<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold down the two top buttons until the LED lights up solid.<br />
#Immiediatley press the second button from the top, on the left side of the controller '''5''' times.<br />
#The LED will flash '''3''' times to indicate a sucessful reset of the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sunricher</big>'''</div><br />
|<div style="text-align: center;">'''<big>AC Phase-Cut Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZG9101SAC-HP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Apply power to the device to start TouchLink Commissioning. You have '''180''' seconds before timeout. Repeat the operation if you exceed the timeout period.<br />
#Bring the remote or touch panel within '''10''' cm of the device.<br />
#Set the remote or touch panel into Touch Reset procedure to reset the device, please refer to the corresponding remote or touch panel manual to learn how.<br />
#There will be an indication on the remote and a connected light will flash '''3''' times to indicate a successful reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Apply power to the device to set it into network pairing mode.<br />
#A connected light will flash twice slowly. You have '''15''' seconds before timeout. Repeat the operation if you exceed the timeout period.<br />
#A connected light will flash '''5''' times and then stay ON solid.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Perform a factory reset using the above procedure.<br />
<br />
<hr /><br />
<br />
=='''<big>Sylvania</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Contact and Temp Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>74388</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Slide the sensor off the mount and remove cover. Remove battery for '''10''' seconds and replace<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Slide the sensor off the mount, remove cover, and remove battery.<br />
#While holding down the reset button, reinsert battery to factory reset the device.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Motion and Temp Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>72923</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery for at least '''10''' seconds.<br />
#Hold down the '''Pairing/Reset''' button while inserting the battery. '''Do not release the button'''.<br />
#The light on the front of the sensor will be solid '''Red. R'''elease the '''Pairing/Reset''' button when the light goes out.<br />
#Remove the battery for at least '''10''' seconds to prepare for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#Perform a factory reset.<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Hold down the '''Pairing/Reset''' button while inserting the battery. As soon as you see the '''Red''' light on the front of the sensor, release the button.<br />
#The light on the front of the sensor will be flashing '''Blue''', indicating it is searching for a Zigbee network to join.<br />
#When the light on the front of the sensor flashes '''Green''' briefly, a network has been found and pairing with the hub will complete shortly after.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Perform a factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>73743</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press and hold both the top and bottom button for '''3''' seconds<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press and hold both the top and bottom button for '''3''' seconds<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press and hold both the top and bottom button for '''3''' seconds<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ 4 Button Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>74099</big>'''</div><br />
|<div style="text-align: center;">'''<big>Button Controller</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Hold buttons '''1''' and '''4''' together. The LED will flash Red.<br />
#Keep holding buttons '''1''' and '''4''' until the LED on the device stops flashing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Hold buttons '''2''' and '''3''' until the LED on the device starts flashing Yellow.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Hold buttons '''1''' and '''4''' together. The LED will flash Red.<br />
#Keep holding buttons '''1''' and '''4''' until the LED on the device stops flashing.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>72922</big>'''</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Make sure the plug is powered on. The light will be orange.<br />
#Press the button located on the front of the plug and hold it down for '''10''' seconds.<br />
#The light will flash orange when it has been reset.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Make sure the plug is powered on. The light will be orange.<br />
#Press the button located on the front of the plug and hold it down for '''10''' seconds.<br />
#The light will flash orange when it has been reset and is ready to be paired.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Make sure the plug is powered on. The light will be orange.<br />
#Press the button located on the front of the plug and hold it down for '''10''' seconds.<br />
#The light will flash orange when it has been reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sylvania</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Turn the light off.<br />
#Turn the light on for '''3''' seconds.<br />
#Turn the light off.<br />
#Repeat this cycle '''5''' times.<br />
#Wait '''10''' seconds for the light to flash '''3''' times.<br />
#Repeat these steps if the light does not flash '''3''' times.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Turn the light off.<br />
#Turn the light on for '''3''' seconds.<br />
#Turn the light off.<br />
#Repeat this cycle '''5''' times.<br />
#Wait '''10''' seconds for the light to flash '''3''' times.<br />
#Repeat these steps if the light does not flash '''3''' times.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Turn the light off.<br />
#Turn the light on for '''3''' seconds.<br />
#Turn the light off.<br />
#Repeat this cycle '''5''' times.<br />
#Wait '''10''' seconds for the light to flash '''3''' times.<br />
#Repeat these steps if the light does not flash '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Sylvania</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart+ BR30 bulb</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>74988</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Start with the Sylvania bulb in the ON position.<br />
#Turn the bulb OFF and ON '''8''' times in a row, pausing for '''1''' second each time you turn the bulb ON or OFF.<br />
#After the eighth time OFF, turn ON the bulb and leave it ON.<br />
#Wait about '''5''' seconds.<br />
#The BR30 bulb will flash if successfully reset.<br />
#Repeat these steps if the light does not flash.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Sylvania bulb in the ON position.<br />
#Turn the bulb OFF and ON '''8''' times in a row, pausing for '''1''' second each time you turn the bulb ON or OFF.<br />
#After the eighth time OFF, turn ON the bulb and leave it ON.<br />
#Wait about '''5''' seconds.<br />
#The BR30 bulb will flash if it entered pairing mode successfully.<br />
#Repeat these steps if the light does not flash.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#Start with the Sylvania bulb in the ON position.<br />
#Turn the bulb OFF and ON '''8''' times in a row, pausing for '''1''' second each time you turn the bulb ON or OFF.<br />
#After the eighth time OFF, turn ON the bulb and leave it ON.<br />
#Wait about '''5''' seconds..<br />
#The BR30 bulb will flash if successfully reset.<br />
#Repeat these steps if the light does not flash.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Sylvania'''</big></div><br />
|<div style="text-align: center;">'''<big>Smart+ Flex RGBW</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat '''5''' times - Unplug for '''1''' second and then plug in for '''1''' second.<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in.<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat '''5''' times - Unplug for '''1''' second and then plug in for '''1''' second.<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in.<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset and ready for pairing.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Start with the Light Strip powered '''ON'''.<br />
#Repeat 5 times - Unplug for '''1''' second and then plug in for '''1''' second.<br />
#On the '''fifth''' time plugging in the Light Strip, leave it plugged in.<br />
#After about '''3''' seconds, the Light Strip will flash rapidly '''3''' times to show a successful reset.<br />
<br />
<hr /><br />
=='''<big>Telguard</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Telguard'''</big></div><br />
|<div style="text-align: center;">'''<big>Garage Door Control Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>GDC1</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the GDC1.<br />
#Remove the cover of the enclosure.<br />
#Press the Z-Wave button once to reset the device.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''Z-Wave button''' once to join the GDC1 for your Z-Wave network.<br />
#If the device fails to join the Z-Wave network, unplug it for '''10''' seconds.<br />
#Repeat step 1 and again press the Z-Wave button.<br />
#Replace the cover of the enclosure.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Plug in the GDC1.<br />
#Remove the cover of the enclosure.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button once to exclude the GDC1 from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Telldus</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Telldus'''</big></div><br />
|<div style="text-align: center;">'''<big>Plug-in ON/OFF switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>TZWP-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the device.<br />
#Press and hold the button until the LED starts flashing white after approximately '''6''' seconds.<br />
#Short-press the button once more.<br />
#The device will now reset to factory defaults and the LED will flash red, indicating that it’s no longer part of the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the button '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the button '''3''' times within '''1.5''' seconds to enter exclusion mode.<br />
<br />
<hr /><br />
=='''<big>Third Reality</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''Third Reality'''</big></div><br />
|<div style="text-align: center;">'''<big>Reality Switch</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the button on the front of the device for approximately '''30''' seconds.<br />
#The LED will light steady for several seconds, then it will begin to flash rapidly<br />
#The device has been reset and is ready for pairing.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Start with the Light Strip powered '''ON'''.<br />
#Press the button on the front of the device for approximately '''30''' seconds.<br />
#The LED will light steady for several seconds, then it will begin to flash rapidly<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Press the button on the front of the device for approximately '''30''' seconds.<br />
#The LED will light steady for several seconds, then it will begin to flash rapidly<br />
#The device has been reset and is ready for pairing.<br />
<br />
<hr /><br />
=='''<big>TKB</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;"><big>'''TKB'''</big></div><br />
|<div style="text-align: center;">'''<big>TKB Dimmer Socket</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>TZ67</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug in the dimmer module.<br />
#Press the '''ON/OFF''' button '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
#Within '''3''' seconds, press andhold the '''ON/OFF''' button for '''5''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Press the '''ON/OFF''' button '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Plug in the dimmer module.<br />
#From the device's details page, select '''Remove Device''', then '''Remove'''.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the '''ON/OFF''' button '''3''' times within '''1.5''' seconds to enter exclusion mode.<br />
<br />
<hr /><br />
=='''<big>Utilitech</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Utilitech</big>'''</div><br />
|<div style="text-align: center;">'''<big>Indoor Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>TSE07</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press the pairing button in between the batteries '''8''' times, '''1''' second apart.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Remove the battery cover.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the paring button once.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Remove the battery cover<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the paring button once.<br />
<br />
<hr /><br />
=='''<big>Vision</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Vision</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren & Strobe</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZM1601US-3</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash indicating the device is reset to factory defaults and excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#The distance between the siren and the hub is suggested to be in '''1''' meter ( '''3''' feet ) or less.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after inclusion.<br />
#If the device is not included, it will continue in auto include more, attempting every '''4-6''' seconds for up to '''4''' attempts.<br />
#The LED light will flash again if the siren has not been included.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash upon successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Vision</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren & Strobe</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZM1601US-5</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash indicating the device is reset to factory defaults and excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#The distance between the siren and the hub is suggested to be in '''1''' meter ( '''3''' feet ) or less.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after inclusion.<br />
#If the device is not included, it will continue in auto include more, attempting every '''4-6''' seconds for up to '''4''' attempts.<br />
#The LED light will flash again if the siren has not been included.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Remove the mounting bracket and press the program button for at least '''1''' second & release.<br />
#The LED light will turn flash upon successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Vision</big>'''</div><br />
|<div style="text-align: center;">'''<big>Shock Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZS5101</big>'''</div><br />
|<div style="text-align: center;">'''<big>Acceleration Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Push the Tamper switch while inserting the battery & holding the Tamper switch for 5 seconds<br />
#The device will reset to the factory defaults and the LED will will remain ON solid<br />
#Remove the battery and re-inset it to complete the reset process.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the program button for at least '''1''' second & release.<br />
#The LED light will turn off after exclusion.<br />
<br />
<hr /><br />
<br />
=='''<big>Visonic</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Visonic</big>'''</div><br />
|<div style="text-align: center;">'''<big>Door/Window Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>MCT-340</big>'''</div><br />
|<div style="text-align: center;">'''<big>Contact Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover.<br />
#Press and hold down the sensor’s tamper switch.<br />
#Insert the battery into the sensor while observing battery polarity.<br />
#Release the tamper switch within '''4''' seconds.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Remove the battery cover.<br />
#Press and release the tamper switch for '''1-2''' seconds.<br />
#The LED will flash '''3''' times, every '''5''' seconds, repeating this cycle up to '''20''' times until paired.<br />
#Test if the the sensor paired properly by moving the magnet away and toward it, observing the Hubitat Elevation™ device details status.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove the battery cover.<br />
#Press and hold down the sensor’s tamper switch.<br />
#Insert the battery into the sensor while observing battery polarity.<br />
#Release the tamper switch within '''4''' seconds.<br />
<br />
<hr /><br />
=='''<big>WaterCop</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>WaterCop</big>'''</div><br />
|<div style="text-align: center;">'''<big>Emergency Water Shut-Off</big>'''</div><br />
|<div style="text-align: center;">'''<big>WAT171021</big>'''</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the Mode button once.<br />
#The status light will start flashing periodically ('''3-4''' times) indicating the device has been reset and excluded from the Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Ensure that the status light is flashing periodically ('''3-4''' times).<br />
#Press the Mode button once.<br />
#The status light will stop flashing upon inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Mode button once.<br />
#The status light will start flashing periodically ('''3-4''' times) indicating the device has been excluded from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Wireless</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Wireless</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smoke Detector</big>'''</div><br />
|<div style="text-align: center;">'''<big>ZWN-SD</big>'''</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Briefly press the program button on the back of the device.<br />
#The status LED will light up and then imeadiatly turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button on the back of the device.<br />
#The status LED will light up for '''5''' seconds and then turn off upon successful inclusion to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Briefly press the program button on the back of the device.<br />
#The status LED will light up and then imeadiatly turn off upon successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
<br />
=='''<big>Xfinity</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Xfinity</big>'''</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>3400-X</big>'''</div><br />
|<div style="text-align: center;">'''<big>Keypad</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove batteries from keypad.<br />
#Press and hold the wall tamper switch while reinstalling the batteries.<br />
#Once the keypad illuminates, release the wall tamper switch.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Perform a factory reset.<br />
#Remove and reinstall the batteries to being device pairing<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Remove batteries from keypad.<br />
#Press and hold the wall tamper switch while reinstalling the batteries.<br />
#Once the keypad illuminates, release the wall tamper switch.<br />
<br />
<hr /><br />
=='''<big>Yale</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yale</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yale Zigbee Locks</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover and batteries.<br />
#Remove the interior escutcheon to access the reset button.<br />
#The reset button is located beside the PCB cable connector.<br />
#While pressing the reset button for a minimum of '''3''' seconds, reinstall the batteries.<br />
#Release reset button and replace battery cover. '''NOTE:''' ''Upon reset, Master PIN Code creation is the only option available and must be performed prior to any other programming of the lock.''<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''1''' to join the Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''3''' to leave the Zigbee network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yale</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yale Z-Wave Locks</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Remove the battery cover and batteries.<br />
#Remove the interior escutcheon to access the reset button.<br />
#The reset button is located beside the PCB cable connector.<br />
#While pressing the reset button for a minimum of '''3''' seconds, reinstall the batteries.<br />
#Release reset button and replace battery cover. '''NOTE:''' ''Upon reset, Master PIN Code creation is the only option available and must be performed prior to any other programming of the lock.''<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''1''' to include the lock in the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Enter the master pin code and then press the button with the '''Gear''' icon on it.<br />
#Press '''7''' on the keypad to enter network setup mode.<br />
#Press '''3''' to exclude the lock from the Z-Wave network.<br />
<br />
<hr /><br />
=='''<big>Yeelight</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yeelight</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yeelight Mono / CT bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start pulsing slowly up and down.<br />
#After '''5''' seconds, it will restart automatically, which means the bulb has been reset to factory defaults.<br />
<br />
'''Join the LAN'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Apps.'''<br />
#Choose '''Yeelight Integration''' from the list of Hubitat Elevation™ Built-In Apps<br />
#*See [[Apps]] documentation for more detail.<br />
#Using the Yeelight mobile app'','' enable '''LAN Control''' for each Yeelight prior to starting discovery. The '''LAN Control''' option can be enabled by selecting the lower right icon in the mobile app menu for each bulb.<br />
#Open the Yeelight setup and start bulb discovery.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start pulsing slowly up and down.<br />
#After '''5''' seconds, it will restart automatically, which means the bulb has been reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Yeelight</big>'''</div><br />
|<div style="text-align: center;">'''<big>Yeelight Color bulbs</big>'''</div><br />
|<div style="text-align: center;"></div><br />
|<div style="text-align: center;">'''<big>Bulb</big>'''</div><br />
|<div style="text-align: center;">'''<big>LAN</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start flashing<br />
#After '''5''' seconds, it will turn white, which means the bulb has been reset to factory defaults.<br />
<br />
'''Join the LAN'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Apps.'''<br />
#Choose '''Yeelight Integration''' from the list of Hubitat Elevation™ Built-In Apps<br />
#*See [[Apps]] documentation for more detail.<br />
#Using the Yeelight mobile app'','' enable '''LAN Control''' for each Yeelight prior to starting discovery. The '''LAN Control''' option can be enabled by selecting the lower right icon in the mobile app menu for each bulb.<br />
#Open the Yeelight setup and start bulb discovery.<br />
<br />
'''Leaving the LAN'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Switch the bulb on and off '''5''' times in a row ('''2''' seconds '''ON''' and '''2''' seconds '''OFF''').<br />
#The bulb will start flashing<br />
#After '''5''' seconds, it will turn white, which means the bulb has been reset to factory defaults.<br />
<br />
<hr /><br />
=='''<big>Zen</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zen</big>'''</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN-01</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Thermostat</big>'''</div><br />
|<div style="text-align: center;">'''<big>Zigbee</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#To do a full factory reset, which will delete all your configuration settings and your network connectivity, you need to remove the device from the wall and press the '''CONFIG''' button '''20''' times.<br />
#*'''NOTE''': Performing a Factory Reset will reset your ZEN's HVAC-system configuration and all of your preferences and advanced settings changes. If you do a Factory Reset, make sure that you set your configuration code and preferences back to their correct values before replacing the display on the wall.<br />
<br />
'''Join the Zigbee Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Zigbee''' on the '''Device Discovery''' page to start device discovery.<br />
#*See [https://docs.hubitat.com/Discovering%20your%20Devices Discovering your devices] for detail instructions.<br />
#Pull the ZEN display off the wall and press the '''Network''' button on the rear of the display '''5''' times.<br />
#You should see the network icon flashing on the front of the display indicating that your ZEN thermostat is attempting to connect to a network.<br />
#The thermostat will indicate it is connected to Hubitat Elevation™ by a Network icon on the front of the device.<br />
#If the network icon is flashing, the ZEN is trying to find your network. The network icon will be solid when you are connected to your Zigbee network.<br />
<br />
'''Leaving the Zigbee Network'''<br />
<br />
#From the device's details page, select '''Remove Device''', then '''Remove.'''<br />
#Pull the ZEN display off the wall and press the '''Network''' button on the rear of the display '''10''' times.<br />
#The Network icon will turn OFF when the thermostat disconnects from the Zigbee network.<br />
<br />
<hr /><br />
<br />
=='''<big>Zipato</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zipato</big>'''</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>PH-PSE02</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Lock</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press tamper key '''4''' times within '''1.5''' seconds, but do not release the tamper key in the 4th press.<br />
#The LED will stay ON solid for '''3''' seconds and then will turn OFF.<br />
#Within '''2''' seconds of the LED turning OFF, release the tamper key. If successful, the LED will turn ON for '''1''' second.<br />
#If reset fails, the LED will flash once.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper key '''3''' times within '''1.5''' seconds to enter inclusion mode.<br />
#After successful inclusion, the LED will light up for '''1''' second.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the tamper key '''3''' times within '''1.5''' seconds to enter exclusion mode.<br />
<br />
<hr /><br />
<br />
=='''<big>ZLINK</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZLINK</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZL-WD-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZLINK</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZL-WS-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr /><br />
=='''<big>Zooz</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Plug</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN06</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Outlet</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug the smart plug into a grounded receptacle.<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''20''' seconds.<br />
#The LED indicator will stay solid '''yellow''' for '''2''' seconds to indicate successful reset and the plug will then automatically turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the smart plug into a grounded receptacle located within '''3''' feet from your Z-Wave radio.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly'''.<br />
#The LED indicator will flash '''blue'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
#LED indicator will flash orange.<br />
#The LED indicator will remain solid '''orange''' for a few seconds to indicate successful exclusion from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Power Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN15</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug the power switch into a grounded receptacle.<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''20''' seconds.<br />
#The LED indicator will flash '''orange''' and then stay solid '''orange''' for '''2''' seconds to indicate successful reset and the switch will then automatically turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the smart plug into a grounded receptacle located within '''3''' feet from your Z-Wave radio.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly'''.<br />
#The LED indicator will start flashing '''blue''', then turn '''blue''' (on) or '''pink''' (off) once included to the Z-Wave network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the Z-Wave button '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
#LED indicator will flash '''orange'''.<br />
#The LED indicator will start flashing '''blue''', then turn '''blue''' (on) or '''pink''' (off) once excluded from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>MultiRelay</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN16</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Press the Z-Wave button '''4''' times quickly.<br />
#The LED indicator will light up, then quickly press the Z-Wave button '''4''' times again.<br />
#If theLED indicator flashes '''3''' times then turns oft, reset was successful.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button '''5''' '''times quickly''' to add the MultiRelay to your network.<br />
#The LED indicator will flash to signal communication and remain on for '''2''' seconds to confirm inclusion.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Bring your MultiRelay close to the hub and ensure is has power.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button '''3''' '''times quickly'''.<br />
#Hubitat Elevation™ will confirm exclusion and the MultiRelay will disappear from the device list.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Power Strip Ver 2.0</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN20</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Power Strip</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Plug the Power Strip into a grounded receptacle.<br />
#Tap the '''CH1''' button '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#All LED indicators will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Plug the Power Strip into a grounded receptacle you’re planning to use it at (it doesn’t need to be close to the hub).<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the '''CH1''' button '''3''' '''times quickly'''.<br />
#All LED indicators will start flashing.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press and release the '''CH1''' button '''3''' '''times quickly'''.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN21</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}<br />
'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly'''.<br />
#The LED indicator will flash to signal communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN22</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly'''.<br />
#The LED indicator will flash to signal communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>ON/OFF Toggle Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN23</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Toggle the switch '''down''' '''3''' times and hold on the third toggle for at least '''10''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''up''' '''3''' '''times quickly'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''down''' '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer Toggle Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN24</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Toggle the switch '''down''' '''3''' times and hold on the third toggle for at least '''10''' seconds.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''up''' '''3''' '''times quickly'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Toggle the switch '''down''' '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>S2 ON/OFF Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN26</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly'''.<br />
#The LED indicator will flash and will remain ON for '''2''' seconds to indicate successful communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>S2 Dimmer Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN27</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Tap the upper paddle '''3''' times and hold on the third tap for at least '''10''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the top paddle '''3''' '''times quickly.'''<br />
#The LED indicator will flash and will remain ON for '''2''' seconds to indicate successful communication.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Tap the bottom paddle '''3''' '''times quickly''' to exclude it from the Z-Wave network.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Double Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the lower paddle on the dimmer for at least '''15''' seconds until the LED indicators start flashing, then release.<br />
#Immediately press and '''hold''' the upper paddle on the dimmer for at least '''15''' seconds.<br />
#The LED indicators will flash again to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the upper paddle '''3 times quickly''' to include the device in the Z-Wave network.<br />
#The LED will flash to indicate communication with the hub and will stay on for '''2''' seconds indicate it has been successfully added to your network.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Bring your Hubitat Elevation™ hub close to the RGBW Dimmer if possible.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the lower paddle '''3 times quickly to exclude it from the Z-Wave network.'''<br />
<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>RGBW Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZEN31</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press and hold the Z-Wave button to enter reset mode.<br />
#Release the button when the LED indicator glows '''Yellow, t'''hen quickly press the Z-Wave button again to confirm factory reset.<br />
#Wait a few seconds until the device resets and restarts.<br />
#The LED indicator will light up in '''Red''' when it’s ready.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button '''3 times quickly''' to include the device in the Z-Wave network.<br />
#The LED will flash '''Yellow''' to indicate communication with the hub.<br />
#The LED will flash '''Green''' to indicate it has been successfully added to your network.<br />
#If inclusion fails, the LED will flash '''Red'''.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#Bring your Hubitat Elevation™ hub close to the RGBW Dimmer if possible.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the Z-Wave button on the device '''3 times quickly'''.<br />
#The LED indicator on the RGBW Dimmer will light up in '''Red''', and the device will disappear from the devices list.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE02</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Please press the Z-Wave button '''6''' TIMES quickly ('''3''' unlock-lock cycles).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Bring the motion sensor within direct reach of your Z-Wave radio.<br />
#Quickly press the Z-Wave button on the motion sensor '''2''' times (unlock and then lock).<br />
#Make sure the button is pushed in (locked) when you finish the process to re-enable motion detection.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the Z-Wave button on the motion sensor '''2''' times (unlock and then lock).<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion and Light Mini Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE09</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''10''' seconds.<br />
#The LED indicator flashes '''1''' time and it may then flash '''5''' times to indicate the device is no longer part of Z-Wave network.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Mini Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Mini Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE18</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''20''' seconds.<br />
#The LED indicator will turn on then turn on solid and will then automatically turn off.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the '''4-5''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Multisiren</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE19</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Siren</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the Z-Wave button '''4''' times and hold on the fourth press for at least '''5''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''4-5''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>S2 Outdoor Motion Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE29</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Press the tamper switch '''4''' times and hold on the fourth press for at least '''5''' seconds.<br />
#The LED indicator will flash to confirm successful reset.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the tamper switch '''4-5''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the tamper switch '''3''' times.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE30</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Water Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''10''' seconds until the LED indicator flashes '''1''' time.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Smart Chime</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE33</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Doorbell</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the Z-Wave button for at least '''10''' seconds until the LED indicator flashes '''1''' time.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button on the Water Sensor '''3''' times.<br />
#The LED indicator will flash quickly.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>4 in 1 Sensor</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZSE40</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Motion Sensor</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#OPEN the back cover to trigger tamper switch.<br />
#Press and release the Z-Wave button using a paperclip '''10''' times quickly (within '''10''' seconds).<br />
#The sensor will start flashing immediately and will again flash '''5''' times after the '''10''' clicks (color depends on room temperature, it’s usually blue or yellow).<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''2''' times with a paperclip.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press and release the Z-Wave button '''2''' times with a paperclip.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>Zooz</big>'''</div><br />
|<div style="text-align: center;">'''<big>Water Valve</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZAC03</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Valve</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#'''PRESS AND HOLD''' the '''RED''' power button for at least 1'''0''' seconds until the LED indicator flashes '''1''' time.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#Connect the valve to power.<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the '''RED''' power button on the valve control '''3''' times.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Quickly press the '''RED''' power button on the valve control '''3''' times.<br />
<br />
<hr /><br />
=='''<big>ZWP</big>'''==<br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZWP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZWP WD-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Dimmer</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr /><br />
{| class="wikitable"<br />
|<div style="text-align: center;">Brand</div><br />
|<div style="text-align: center;">Device</div><br />
|<div style="text-align: center;">Product Number</div><br />
|<div style="text-align: center;">Device Type</div><br />
|<div style="text-align: center;">Protocol</div><br />
|-<br />
|<div style="text-align: center;">'''<big>ZWP</big>'''</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;"><br />
'''<big>ZWP WS-100</big>'''<br />
</div><br />
|<div style="text-align: center;">'''<big>Switch</big>'''</div><br />
|<div style="text-align: center;">'''<big>Z-Wave Plus</big>'''</div><br />
|}'''Factory Reset'''<br />
<br />
#Turn on the connected lighting with the rocker.<br />
#Quickly tap on the '''top''' of the rocker '''3''' times.<br />
#Now quickly tap on the '''bottom''' of the rocker '''3''' times.<br />
#When reset is successful, the light will turn off and on again.<br />
<br />
'''Join the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Inclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to include the device in the Z-Wave network.<br />
#If inclusion fails, perform a factory reset, then try to include the device in the Z-Wave network again.<br />
<br />
'''Exclusion from the Z-Wave Network'''<br />
<br />
#From the Hubitat Web Interface home page, select '''Z-Wave''', then '''Start Z-Wave Exclusion''' on the '''Device Discovery''' page.<br />
#*See [[Discovering your Devices|Discovering your devices]] for detail instructions.<br />
#Press the rocker switch once to exclude the device from the Z-Wave network.<br />
#If exclusion fails, perform a factory reset.<br />
<br />
<hr />'''*Note: Aeotec was formerly known as Aeon Labs.'''<br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=List_of_Compatible_Devices&diff=5183List of Compatible Devices2021-07-26T15:27:07Z<p>Doug: </p>
<hr />
<div>{{Top}}<br />
<br />
<big>The table below lists devices compatible with Hubitat Elevation. You can sort the list by Brand Name, Protocol or Device Type to help you quickly find the device you are looking for. This list will be updated over time.</big> <br />
<br />
<big>Devices listed here are confirmed to have worked with Hubitat, but this does not mean the device will be guaranteed to work with Hubitat. Support cannot assist you with pairing devices with the hub. Building a proper mesh network with repeaters is required to make most Zigbee and Z-Wave™ devices work with Hubitat.</big> <br />
<br />
<big>Zigbee and Z-Wave devices require the correct drivers to connect and work properly with the hub. LAN and Cloud devices connect using the specific integration app listed and may require an additional bridge device to communicate.</big><br />
<br />
<big>While this list includes devices known by Hubitat to work, there are countless other devices users have running on their hubs. Visit our [https://community.hubitat.com/t/compatible-devices-wiki/465 Community Devices Page] to see other devices users have running on their hubs. Some of these devices use custom drivers, for which support comes from the custom driver author, not from Hubitat.</big> <br />
<br />
{| class="wikitable sortable"<br />
|+<br />
!Brand (Select link for join/reset instructions)<br />
!Device<br />
!Product Number<br />
!Device type<br />
!Protocol<br />
!Driver Name<br />
!Integration App<br />
!Additional Required Hardware<br />
|-<br />
|2GIG<br />
|700 Series Smart Thermostat<br />
|STZ-1<br />
|Thermostat<br />
|Z-Wave<br />
|Generic Z-Wave Plus Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ADT |<sup>ADT</sup>]]===<br />
|Zigbee Water Sensor|| ||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#AduroSmart |<sup>AduroSmart</sup>]]===<br />
|ERIA Motion Sensor|| ||Motion Sensor||Zigbee||ERIA Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#AduroSmart |<sup>AduroSmart</sup>]]===<br />
|ERIA Dimmer Switch|| ||Button Controller||Zigbee||ERIA Dimmer Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#AduroSmart |<sup>AduroSmart</sup>]]===<br />
|ERIA Contact Sensor|| ||Contact Sensor||Zigbee||ERIA Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|aërQ Temperature & Humidity Sensor<br />
|ZWA009<br />
|Temperature Sensor<br />
|Z-Wave<br />
|Aeotec aerQ<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|Siren 6||ZW164-A||Siren||Z-Wave||Aeotec Siren 6 New|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|Doorbell 6||ZW162-A||Doorbell||Z-Wave||Aeotec Siren 6 New|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Switch||ZW116||Switch||Z-Wave||Aeotec Nano Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Dual Nano Switch<br />
|ZW132<br />
|Switch<br />
|Z-Wave<br />
|Aeotec Dual Nano Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Switch||ZW139||Switch||Z-Wave||Aeotec Nano Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|WallMote Quad||ZW130||Button Controller||Z-Wave||Aeon WallMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Contact Sensor||DSB04100||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor Gen 2|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor 7 Series<br />
|DWS7<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor 7 Pro<br />
|AEOEZWA012<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door/Window Sensor 7 Basic<br />
|<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Doorbell||ZW056||Doorbell||Z-Wave||Aeon Labs Doorbell|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Dry Contact Sensor||ZW097-A||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Dual Micro Switch<br />
|DSC17<br />
|Switch<br />
|Z-Wave<br />
|Aeotec Dual Micro Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Micro Switch G2||DSC26103||Switch||Z-Wave||Aeon Micro Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Home Energy Meter|| ||Energy Meter||Z-Wave||Aeon Home Energy Meter|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|LED Bulb 6 Multi-Color|| ||Bulb||Z-Wave||Aeotec LED Bulb 6 Multi-Color|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Micro Illuminator G2||DSC27103||Dimmer||Z-Wave||Aeon Micro Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Micro Motor Controllers|| ||Motor Controller||Z-Wave||Aeon Motor Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Minimote||DSA03202||Button Controller||Z-Wave||Aeon Minimote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Motor Controller|| ||Motor Controller||Z-Wave||Aeon Motor Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|MultiSensor 5|| ||Motion Sensor||Z-Wave||Aeon MultiSensor 6|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|MultiSensor 6||ZW100-A||Motion Sensor||Z-Wave||Aeon MultiSensor 6|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|MultiSensor 7<br />
|ZWA024-C<br />
|Motion Sensor<br />
|Z-Wave<br />
|Aeotec Multisensor 7<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|NanoMote One||ZWA003-A||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|NanoMote Quad||ZWA004-A||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Shutter<br />
|ZW141<br />
|Motor Controller<br />
|Z-Wave<br />
|Aeotec Nano Shutter<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Recessed Door Sensor||DS854-ZWUS||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Recessed Door Sensor Gen 5||ZW089||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Recessed Door Sensor 7<br />
|ZW187-A<br />
|Contact Sensor<br />
|Z-Wave<br />
|Aeotec Door/Window Sensor 7 Series<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Siren||ZW080||Siren||Z-Wave||Aeon Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Smart Energy Switch<br />
|DSC06106<br />
|Outlet<br />
|Z-Wave<br />
|Aeote Smart Energy Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Smart Switch 6||ZW096-A02, ZW096AU, ZW110-B09||Outlet||Z-Wave||Aeotec Smart Switch 6|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29|<sup>Aeotec</sup>*]]===<br />
|Smart Switch 7 US<br />
|ZWA023-A<br />
|Outlet<br />
|Z-Wave<br />
|Aeotec Smart Switch 7 US<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|TriSensor||ZWA005-A||Motion Sensor||Z-Wave||Aeotec TriSensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|WallMote||ZW129-A||Button Controller||Z-Wave||Aeon WallMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door Window Sensor 6|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Door Window Sensor 7||ZWA008-A||Contact Sensor||Z-Wave||Aeotec Door/Window Sensor 7|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Range Extender 6|| ||Repeater||Z-Wave||Generic Z-Wave Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|LED Bulb 5||ZW098-A52||Bulb||Z-Wave||Aeon LED Bulb|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|LED Bulb 6 Multi-White|| ||Bulb||Z-Wave||Aeotec LED Bulb 6 Multi-White|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Range Extender||DSD37-ZWUS||Repeater||Z-Wave||Generic Z-Wave Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Range Extender 7<br />
|ZW189<br />
|Repeater<br />
|Z-Wave<br />
|Generic Z-Wave Repeater<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Garage Door Controller Gen 5|| ||Garage Door Controller||Z-Wave||Generic Z-Wave Garage Door Opener|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Water Sensor 7 Pro<br />
|ZWA019-C<br />
|Water Sensor<br />
|Z-Wave<br />
|Aeotec Water Sensor 7 Pro<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aeotec .28Aeon Labs.29 |<sup>Aeotec</sup>*]]===<br />
|Nano Dimmer||ZW111||Dimmer||Z-Wave||Aeotec Nano Dimmer|| ||<br />
|-<br />
|<br />
===<sup>AGSHome</sup>===<br />
|Motion Sensor<br />
|DP-ZGMD2<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===[[Amazon Echo Skill|<sup>Amazon</sup>]]===<br />
|Echo|| ||Voice Assistant||Cloud|| ||Amazon Echo Skill||<br />
|-<br />
|<br />
===<sup>alertMe</sup>===<br />
|Smart Plug<br />
|SPG100<br />
|Outlet<br />
|Zigbee<br />
|Iris V1 Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Alfred|<sup>Alfred</sup>]]===<br />
|Z-Wave Lock|| ||Lock||Z-Wave|| || ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#August |<sup>August</sup>]]===<br />
|August Pro Lock|| ||Lock||Z-Wave||August Pro Z-Wave Lock|| ||<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Smart Tunable GLS<br />
|AU-A1GSZ9CXE<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Smart Tunable GU10<br />
|AU-A1GUZBCX5<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Smart dimmable GLS Lamp<br />
|AU-A1GSZ9E/27<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|RGBW GLS<br />
|AU-A1GSZ9RGBWE<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|RGBW GU10<br />
|AU-A1GUZBRGBW<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Zigbee vintage GLS Lamp<br />
|AU-A1VGSZ5E/19<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Zigbee vintage G125 Lamp<br />
|AU-A1VG125Z5E/19<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Aurora</sup>===<br />
|Zigbee vintage ST64 Lamp<br />
|AU-A1VST64Z5E/19<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aurora|<sup>Aurora</sup>]]===<br />
|AOne Smart Remote<br />
|AU-A1ZBRC<br />
|Button Controller<br />
|Zigbee<br />
|Aurora Zigbee Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aurora|<sup>Aurora</sup>]]===<br />
|AOne Smart Plug-In Socket<br />
|AU-A1ZBPIAB<br />
|Outlet<br />
|Zigbee<br />
|Aurora Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Aurora|<sup>Aurora</sup>]]===<br />
|AOne Smart Double Socket<br />
|AU-A1ZBDSS<br />
|Outlet<br />
|Zigbee<br />
|Aurora Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BeSense |<sup>BeSense</sup>]]===<br />
|360 Ceiling Sensor||IX32||Motion Sensor||Z-Wave||BeSense Motion Sensor Zwave Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BeSense |<sup>BeSense</sup>]]===<br />
|Door/Window Sensor||IM20||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BeSense |<sup>BeSense</sup>]]===<br />
|PIR Wall Sensor||IX30||Motion Sensor||Z-Wave||BeSense Motion Sensor Zwave Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BOSCH|<sup>Bosch</sup>]]===<br />
|PIR Motion Detector||ISW-ZPR1-WP13||Motion Sensor||Zigbee||Bosch Motion Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#BOSCH|<sup>Bosch</sup>]]===<br />
|TriTech Motion Detector||ISW-ZDL1-WP11G||Motion Sensor||Zigbee||Bosch Motion Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Contact Sensor|| ||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Micro Door Sensor|| ||Contact Sensor||Zigbee||SmartSense Multi Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Motion Sensor|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Outlet Plug-in|| ||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Smart Outlet||4200-C||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Centralite |<sup>Centralite</sup>]]===<br />
|Perl Thermostat|| ||Thermostat||Zigbee||Generic Zigbee Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#CREE |<sup>Cree</sup>]]===<br />
|Connected A-19 Bulb|| ||Bulb||Zigbee||Generic Zigbee Bulb|| ||<br />
|-<br />
|<br />
===<sup>CEL</sup>===<br />
|Cotet Z10 Range Extender<br />
|CGW-Z-0010<br />
|Repeater<br />
|Zigbee<br />
|Ikea TRADFRI Signal Repeater<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Denon</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Denon AVR|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Door Sensor||DMWD1||Contact Sensor||Z-Wave||Dome Door Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Door/Window Sensor Pro||DMDP1||Contact Sensor||Z-Wave||Dome Door/Window Sensor Pro|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Leak Sensor||DMWS1||Water Sensor||Z-Wave||Dome Leak Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Motion Sensor||DMMS1||Motion Sensor||Z-Wave||Dome Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Mouser||DMMZ1||Mouse Trap||Z-Wave||Dome Mouser|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|On/Off Plug||DMOF1||Outlet||Z-Wave||Dome On Off Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Siren||DMS01||Siren||Z-Wave||Dome Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Water Shutoff||DMWV1||Valve||Z-Wave||Dome Water Shut-Off|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dome |<sup>Dome</sup>]]===<br />
|Dome Range Extender||DMEX1||Repeater||Z-Wave||Dome Range Extender|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Dragon Tech |<sup>Dragontech</sup>]]===<br />
|Outlet|| ||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eaton .28Cooper Wiring Devices.29 |<sup>Eaton</sup>]]===<br />
|Switch<br />
|RF9601<br />
|Switch<br />
|Z-Wave<br />
|Generic Z-Wave Smart Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eaton .28Cooper Wiring Devices.29 |<sup>Eaton</sup>]]===<br />
|Dimmer||RF9540, RF9640||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===[[Ecobee Integration|<sup>Ecobee</sup>]]===<br />
| || ||Thermostat||Cloud|| ||Ecobee Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Contact Sensor||DWZWAVE2.5-ECO||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Garage Door Tilt Sensor||TILT-ZWAVE2||Tilt Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|'''Ecolink''' <br />
|Garage Door Tilt Sensor<br />
|TILT-ZWAVE5<br />
|Tilt Sensor<br />
|Z-Wave<br />
|Ecolink Garage Door Tilt Sensor (TILT-ZWAVE5)<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Motion Sensor||PIRZWAVE2.5||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Siren||SC-ZWAVE5||Siren||Z-Wave||Ecolink Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Smoke/CO Audio Detector||FF-ZWAVE5||Smoke/CO Detector||Z-Wave||Ecolink Smoke/CO Audio Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Tilt Sensor||TILTZWAVE2.5||Tilt Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Double Rocker Switch||DDLS2-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Rocker Switch||DLS-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Toggle Switch||TLS-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Flood/Freeze Sensor||FLF-ZWAVE5||Water Sensor||Z-Wave||Generic Z-Wave Water Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Wireless Double Toggle Switch||DTLS2-ZWAVE5||Switch||Z-Wave||Ecolink Wireless Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Pet Immune Motion Detector<br />
|PIRZB1-ECO<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ecolink |<sup>Ecolink</sup>]]===<br />
|Door/Window Sensor<br />
|DWZB1-ECO<br />
|Contact Sensor<br />
|Zigbee<br />
|Generic Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Enerwave |<sup>Enerwave</sup>]]===<br />
|Duplex Outlet|| ||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Enerwave |<sup>Enerwave</sup>]]===<br />
|Motion Sensor|| ||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|Eurotronic<br />
|Spirit TRV Thermostat<br />
|700201<br />
|Thermostat<br />
|Z-Wave<br />
|Eurotronic Spirit TRV Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|In-Wall Switch<br />
|ZW30<br />
|Switch<br />
|Z-Wave<br />
|EVA LOGIK In-Wall Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|Smart Plug||ZW36, ZW37||Outlet||Z-Wave||EVA LOGIK Smart Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|Smart Plug<br />
|ZW39<br />
|Dimmer<br />
|Z-Wave<br />
|EVA LOGIK Smart Plug Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Eva Logik|<sup>Eva Logik</sup>]]===<br />
|Outdoor Plug<br />
|ZW96<br />
|Outlet<br />
|Z-Wave<br />
|EVA LOGIK Smart Plug<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Contact Sensor||HSM02||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Flood Detector||ST812||Water Sensor||Z-Wave||Generic Z-Wave Water Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Temperature/Humidity Sensor||ST814||Temperature Sensor||Z-Wave||Generic Z-Wave Temperature/Humidity Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Everspring Illumination Sensor<br />
|ST815<br />
|Light Sensor<br />
|Z-Wave<br />
|Everspring Illumination Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Motion Sensor||HSP02||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Everspring |<sup>Everspring</sup>]]===<br />
|Smoke Detector||SF813||Smoke Detector||Z-Wave||Generic Z-Wave Smoke Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Evolve |<sup>Evolve</sup>]]===<br />
|Relay||LFM-20||Relay||Z-Wave||Generic Z-Wave Relay|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Universal Binary Sensor<br />
|FGBS-001<br />
|Contact Sensor<br />
|Z-Wave<br />
|Fibaro Universal Binary Sensor<br />
|<br />
|Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Fibaro Smart Implant<br />
|FGBS-222<br />
|Multisensor<br />
|Z-Wave<br />
|Fibaro Smart Implant<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Button||FGPB-101||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Door/Window Sensor 2||FGDW-002||Contact Sensor||Z-Wave||Fibaro Door/Window Sensor 2|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Flood Sensor||FGFS-101||Water Sensor||Z-Wave||Fibaro Flood Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Flood Sensor ZW5||FGFS-101 ZW5||Water Sensor||Z-Wave||Fibaro Flood Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|KeyFob||FGKF-601 ZW5||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Motion Sensor ZW5||FGMS-001||Motion Sensor||Z-Wave||Fibaro Motion Sensor ZW5|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Fibaro RGBW Controller||FGRGBW-101||RGBW Controller||Z-Wave||Fibaro RGBW Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Single Switch 2||FGS-213||Switch||Z-Wave||Fibaro Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Radiator Thermostat<br />
|FIBEFGT-001<br />
|Thermostat<br />
|Z-Wave<br />
|Fibaro Heat Controller Thermostat Head<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Wall Plug||FGWPB-111, FGWPB-121||Outlet||Z-Wave||Fibaro Wall Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Fibaro |<sup>Fibaro</sup>]]===<br />
|Fibaro Dimmer 2||FGD-212||Dimmer||Z-Wave||Fibaro Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#First Alert |<sup>First Alert</sup>]]===<br />
|Smoke & CO Alarm||ZCOMBO||Smoke/CO Detector||Z-Wave||Generic Z-Wave Smoke/CO Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#First Alert |<sup>First Alert</sup>]]===<br />
|Smoke & CO Alarm<br />
|ZCOMBO Gen 2 & 3<br />
|Smoke/CO Detector<br />
|Z-Wave<br />
|Generic Z-Wave Plus Smoke/CO Detector<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#FortrezZ|<sup>FortrezZ</sup>]]===<br />
|MIMO2+||MIMO2+||Relay||Z-Wave||Fortrezz MIMO2+|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#FortrezZ|<sup>FortrezZ</sup>]]===<br />
|MIMOlite||MIMOlite||Relay||Z-Wave||Fortrezz MIMOlite|| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Outlet<br />
|14267<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Plus Outlet<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Switch<br />
|14293<br />
|Switch||Z-Wave||Generic Z-Wave Plus Scene Switch<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Dimmer<br />
|14296<br />
|Dimmer<br />
|Z-Wave<br />
|GE Enbrighten Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Outdoor Smart Switch<br />
|14298<br />
|Switch||Z-Wave||Generic Z-Wave Plus Switch<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Switch<br />
|43072, 43074, 46201, 46202<br />
|Switch||Z-Wave||Generic Z-Wave Plus Scene Switch<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Dimmer<br />
|46204<br />
|Dimmer||Z-Wave||GE Enbrighten Z-Wave Smart Dimmer<br />
| ||<br />
|-<br />
|GE Enbrighten<br />
|Smart Outlet<br />
|55249<br />
|Outlet<br />
|Z-Wave<br />
|Jasco Z-Wave Dual Outlet<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Dimmer<br />
|52252<br />
|Dimmer<br />
|Z-Wave<br />
|GE Enbrighten Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Outlet<br />
|55256<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Plus Outlet<br />
|<br />
|<br />
|-<br />
|GE Enbrighten<br />
|Smart Fan Control<br />
|55258<br />
|Fan Controller<br />
|Z-Wave<br />
|GE Smart Fan Control<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Switch||14291||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===<sup>GE/Jasco</sup>===<br />
|GE 40 Amp Smart Switch<br />
|14285<br />
|Switch<br />
|Z-Wave<br />
|GE 40 Amp Smart Switch<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Dimmer||14294||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Motion Switch||26931||Switch||Z-Wave||Jasco Z-Wave Motion Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart Motion Dimmer||26993||Dimmer||Z-Wave||Jasco Z-Wave Motion Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Plug-In Dual Outlet Smart DImmer<br />
|28175<br />
|Dimmer<br />
|Z-Wave<br />
|Jasco Z-Wave Dual Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Plug-In Dual Outlet Smart Switch<br />
|28177<br />
|Switch<br />
|Z-Wave<br />
|Jasco Z-Wave Dual Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|GE Smart Door Sensor||32563ZW6301||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Switch<br />
|43076<br />
|Switch<br />
|Zigbee<br />
|GE Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Dimmer<br />
|43090<br />
|Dimmer<br />
|Zigbee<br />
|GE Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Plug-In Smart Switch<br />
|45853<br />
|Switch<br />
|Zigbee<br />
|GE Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Switch||45856||Switch||Zigbee||GE Zigbee Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|In-Wall Smart Dimmer||45857||Dimmer||Zigbee||GE Zigbee Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Enbrighten Smart Switch<br />
|46201<br />
|Switch<br />
|Z-Wave<br />
|GE Z-Wave Smart Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Enbrighten Smart Dimmer<br />
|46203<br />
|Dimmer<br />
|Z-Wave<br />
|GE Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Smart LED Bulb<br />
|52190<br />
|Bulb<br />
|Z-Wave<br />
|Generic Z-Wave Plus Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Flood/Freeze Sensor<br />
|52247<br />
|Water Sensor<br />
|Z-Wave<br />
|Jasco Flood Freeze Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Slim Door/Window Sensor<br />
|52249<br />
|Contact Sensor<br />
|Z-Wave<br />
|Generic Z-Wave Plus Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|Portable Smart Motion Sensor<br />
|52251<br />
|Motion Sensor<br />
|Z-Wave<br />
|Jasco Smart Motion Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|2-Button Hub/Panel Remote<br />
|53829<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Plus Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GE.2FJasco |<sup>GE/Jasco</sup>]]===<br />
|4-Button Hub/Panel Remote<br />
|53831<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Plus Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GLEDOPTO|<sup>GLEDOPTO</sup>]]===<br />
|Mini RGB+CCT Controller<br />
|GL-MC-001<br />
|Bulb<br />
|Zigbee<br />
|Generic ZigBee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Garage Door Controller||GD00Z-8<br />
|Garage Door Controller||Z-Wave||Generic Z-Wave Garage Door Opener|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Glass Break Detector|| ||Glass Break Detector||Z-Wave||Generic Glass Break Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Z-Wave Thermostat||GC-TBZ48||Thermostat||Z-Wave||GoControl Z-Wave Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Dimmable LED Indoor Flood Light<br />
|LBR30Z-1<br />
|Bulb<br />
|Z-Wave<br />
|Generic Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#GoControl |<sup>GoControl</sup>]]===<br />
|Smart Wireless Light Switch<br />
|WA00Z-1<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Google Home|<sup>Google</sup>]]===<br />
|Google Home Assistant|| ||Voice Assistant||Cloud|| ||Google Home Integration||<br />
|-<br />
|<br />
===<sup>Google</sup>===<br />
|Chromecast|| ||Media Renderer||LAN|| ||Chromecast Integration (beta)||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Graber |<sup>Graber</sup>]]===<br />
|Z-Wave+ Roller Blinds|| ||Shade Controller||Z-Wave||Generic Z-Wave Shade|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Halo Labs |<sup>Halo Labs</sup>]]===<br />
|Halo+ Smoke Alarm|| ||Smoke/CO Detector||Zigbee||Halo Smoke Alarm|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hampton Bay |<sup>Hampton Bay</sup>]]===<br />
|Fan Controller||MR101Z||Fan Controller||Zigbee|| || ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hank |<sup>Hank</sup>]]===<br />
|Four-Key Scene Controller||HKZW-SCN04||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hank |<sup>Hank</sup>]]===<br />
|One-Key Scene Controller||HKZW-SCN01||Button Controller||Z-Wave||Aeotec NanoMote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Hank |<sup>Hank</sup>]]===<br />
|RGBW LED Bulb||HKZW-RGB01||Bulb||Z-Wave||Hank RGBW LED Bulb|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Dim<br />
|14 444 44<br />
|Dimmer<br />
|Z-Wave<br />
|Heatit Z-Dim<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Temp2<br />
|45 126 66<br />
|Thermostat<br />
|Z-Wave<br />
|Heatit Z-Temp2<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Repeater<br />
|45 126 86<br />
|Repeater<br />
|Z-Wave<br />
|Heatit Z-Repeater<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Heatit</sup>===<br />
|Z-Smoke Battery<br />
|45 126 88<br />
|Smoke Detector<br />
|Z-Wave<br />
|Heatit Z-Smoke<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-Smoke 230V<br />
|45 126 89<br />
|Smoke Detector<br />
|Z-Wave<br />
|Heatit Z-Smoke<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#Heatit|Heatit]]</sup>===<br />
|Z-TRM3<br />
|54 305 98<br />
|Thermostat<br />
|Z-Wave<br />
|Heatit Z-TRM3<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Heiman</sup>===<br />
|Zigbee Gas Detector<br />
|HS1CG<br />
|Gas Detector<br />
|Zigbee<br />
|Heiman Zigbee Gas Detector<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Heiman</sup>===<br />
|Z-Wave Smoke Detector<br />
|HS1SA-Z<br />
|Smoke Detector<br />
|Z-Wave<br />
|Generic Z-Wave Smoke Detector<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#HomePro |<sup>HomePro</sup>]]===<br />
|Outlet||ZRP110||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|ZWave Plus Door/Window Sensor||HS-DS100+||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Floodlight Sensor<br />
|HS-FLS100+<br />
|Light Sensor<br />
|Z-Wave<br />
|HomeSeer Floodlight Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Homeseer</sup>===<br />
|HomeSeer Floodlight Sensor G2<br />
|HS-FLS100-G2<br />
|Light Sensor<br />
|Z-Wave<br />
|HomeSeer Floodlight Sensor G2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Indicator Light Sensor||HS-FS100-L+||Light Sensor||Z-Wave||HomeSeer Flex Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Perimeter Water Sensor||HS-FS100-W+||Water Sensor||Z-Wave||HomeSeer Flex Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Multi-Sensor<br />
|HSM200<br />
|Motion Sensor<br />
|Z-Wave<br />
|HomeSeer Multi-Sensor HSM200<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|HomeSeer Fan Controller<br />
|FC200+<br />
|Fan Controller<br />
|Z-Wave<br />
|HomeSeer Fan Controller FC200+<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|Water Sensor||HS-LS100+||Water Sensor||Z-Wave||HomeSeer Leak Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|Wall Dimmer||HS-WD200+||Dimmer||Z-Wave||HomeSeer WD-200 Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Homeseer |<sup>Homeseer</sup>]]===<br />
|Wall Switch||HS-WS200+||Switch||Z-Wave||Generic Z-Wave CentralScene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Honeywell|<sup>Honeywell</sup>]]===<br />
|T6 Pro Z-Wave Thermostat<br />
|TH6320ZW2003<br />
|Thermostat<br />
|Z-Wave<br />
|Honeywell T6 Pro Z-Wave Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>iBlinds</sup>===<br />
|HAB Home Intel Z-Wave iBlinds V3<br />
|IB3.0<br />
|Shade Controller<br />
|Z-Wave<br />
|HAB Home Intel Blinds V3<br />
|<br />
|<br />
|-<br />
|<br />
===[[IFTTT Integration|<sup>IFTTT</sup>]]===<br />
| || || ||Cloud|| ||IFTTT Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|SYMFONISK Sound Remote<br />
|20370482<br />
|Button Controller<br />
|Zigbee<br />
|Ikea Zigbee Sound Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|TRÅDFRI Bulb E26||1000lm Warm White||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|TRÅDFRI Outlet|| ||Outlet||Zigbee||Ikea TRADFRI Control Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IKEA |<sup>IKEA</sup>]]===<br />
|TRÅDFRI Signal Repeater|| ||Repeater||Zigbee||Ikea TRADFRI Signal Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Innr|<sup>Innr</sup>]]===<br />
|Smart Spot Colour GU10<br />
|RS 230 C<br />
|Bulb<br />
|Zigbee<br />
|Generic ZigBee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Innr</sup>===<br />
|Zigbee outlet - UK version<br />
|SP222<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Outlet|| ||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Switch|| ||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Switch Module|| ||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Switch<br />
|NZW30<br />
|Switch<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Scene Switch<br />
|NZW30<br />
|Switch<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Scene Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Dimmer<br />
|NZW31<br />
|Dimmer<br />
|Z-Wave<br />
|Inovelli Z-Wave Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Scene Dimmer<br />
|NZW31<br />
|Dimmer<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Scene Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|2-Channel Plug<br />
|NZW37<br />
|Outlet<br />
|Z-Wave<br />
|Inovelli 2-Channel Plug<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Smart Scene Switch S2<br />
|LZW30-SN<br />
|Switch||Z-Wave||Inovelli Z-Wave Smart Scene Switch S2|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|On/Off Switch S2<br />
|LZW30<br />
|Switch<br />
|Z-Wave<br />
|Inovelli Z-Wave Smart Switch S2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Inovelli Fan/Light Switch<br />
|LZW36<br />
|Fan Controller<br />
|Z-Wave<br />
|Inovelli Fan/Light Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Tuneable White Bulb<br />
|LZW41<br />
|Bulb<br />
|Z-Wave<br />
|Inovelli Bulb Multi-White<br />
|<br />
|Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|RGBW Multi-Color Bulb<br />
|LZW42<br />
|Bulb<br />
|Z-Wave<br />
|Inovelli Bulb Multi-Color<br />
|<br />
|Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Inovelli |<sup>Inovelli</sup>]]===<br />
|Inovelli 4-in-1 Sensor<br />
|LZW60<br />
|Motion Sensor<br />
|Z-Wave<br />
|Inovelli 4-in-1 Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]] <sup>V1 (AlertMe.com)</sup>===<br />
|V1 Button||BTN900||Button Controller||Zigbee||Iris V1 Button|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Care Pendant||PDT900||Button Controller||Zigbee||Iris V1 Care Pendant|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Door/Window Sensor||DWS800||Contact Sensor||Zigbee||Iris V1 Contact Sensor|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Keyfob||KEY903||Presence Sensor||Zigbee||Iris V1 Key Fob|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Motion Sensor||MOT800||Motion Sensor||Zigbee||Iris V1 Motion Sensor|| ||<br />
|-<br />
|<br />
===<sup>[[Join and Reset Instructions#IRIS |Iris]] V1 (AlertMe.com)</sup>===<br />
|V1 Smart Plug||SPG800||Outlet||Zigbee||Iris V1 Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Button||3460-L||Button Controller||Zigbee||Iris Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Door/Window Sensor||3320-L||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|Garage Door Opener||GD00Z-1||Garage Door Controller||Z-Wave||Generic Z-Wave Garage Door Opener|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V3 Contact Sensor<br />
|1116-S<br />
|Contact Sensor<br />
|Zigbee<br />
|Generic Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Keypad||3405-L||Keypad||Zigbee||Iris V2 Keypad|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V3 Keypad||iL02_1||Keypad||Zigbee||Iris V3 Keypad|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Motion Sensor||3326-L||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V3 Motion Sensor||iL07_1||Motion Sensor||Zigbee||Generic Zigbee Motion/Humidity Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Outlet||3210-L||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|Smart Plug Z-Wave Repeater||3210-L||Repeater||Z-Wave||Generic Z-Wave Repeater|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|V2 Smart Fob||3450-L||Button Controller||Zigbee||Iris 4 Button Fob|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#IRIS |<sup>Iris</sup>]]===<br />
|Smart Water Sensor||3315-L||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#KEEN Home |<sup>KEEN Home</sup>]]===<br />
|Smart Vent|| ||Vent||Zigbee||Keen Home Smart Vent|| ||<br />
|-<br />
|<br />
===<sup>keyWe</sup>===<br />
|Lock|| ||Lock||Z-Wave||keyWe Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|10-Button Deadbolt|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|10-Button Touch Deadbolt|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|5-Button Deadbolt|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|5-Button Lever|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|910/912 Lock|| ||Lock||Z-Wave||Generic Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Kwikset |<sup>Kwikset</sup>]]===<br />
|Smartcode Lock|| ||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leak Intelligence |<sup>Leak Intelligence</sup>]]===<br />
|Leak Gopher Valve|| ||Valve||Z-Wave||Generic Z-Wave Valve|| ||<br />
|-<br />
|<br />
===<sup>Leaksmart</sup>===<br />
|Water Sensor<br />
|8850600<br />
|Water Sensor<br />
|Zigbee<br />
|Leaksmart Zigbee Moisture Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Leaksmart</sup>===<br />
|Water Valve<br />
|8880000<br />
|Water Valve<br />
|Zigbee<br />
|Sinope water valve<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Fan Controller|| ||Fan Controller||Z-Wave||Leviton Fan Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Plug-in Dimmer<br />
|DG3HL<br />
|Dimmer<br />
|Zigbee<br />
|Leviton Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Plug-in Outlet<br />
|DG15A<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|In-Wall Switch<br />
|DG15S<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|In-Wall Dimmer<br />
|DG6HD<br />
|Dimmer<br />
|Zigbee<br />
|Leviton Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Plug-in Appliance Module||DZPA1||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Dimmer||VRMX1||Dimmer||Z-Wave||Generic Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Smart Dimmer||DZ6HD-1BZ||Dimmer||Z-Wave||Leviton DZ6HD Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Smart Dimmer||DZMX1||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch<br />
|VRCS1<br />
|Switch<br />
|Z-Wave<br />
|Leviton VRCS1 Z-Wave Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Scene controller||VRCS4||Button Controller||Z-Wave||Leviton VRCS4 Z-Wave Controller<br />
| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch<br />
|DL15S<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch||DZ15S||Switch||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Dimmer||VRI06-1LZ, VRI10-1LZ||Dimmer||Z-Wave||Generic Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch||DZS15-1LZ||Switch||Z-Wave||Generic Z-Wave Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Switch||VRS15-1LZ||Switch||Z-Wave||Generic Z-Wave Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Leviton |<sup>Leviton</sup>]]===<br />
|Tamper-Resistant Outlet<br />
|ZW15R<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Life360 Connector|<sup>Life360</sup>]]===<br />
|Life360 App|| ||Presence Sensor||Cloud|| ||Life360 Connector||Compatible Smart Phone<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Linear |<sup>Linear</sup>]]===<br />
|Contact Sensor||WADWAZ-1||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Linear |<sup>Linear</sup>]]===<br />
|Motion Sensor||WAPIRZ-1||Motion Sensor||Z-Wave||Generic Z-Wave Motion/Temperature Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Linear |<sup>Linear</sup>]]===<br />
|Siren||WA105DBZ-1||Siren||Z-Wave||Linear/Vision Siren|| ||<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Tunable White Bulb<br />
|ZL1000100-CCT-EU<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Dimmable White Bulb<br />
|ZL1000100-CCT/DIM-US<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Door/Window Sensor<br />
|ZS1100500<br />
|Contact Sensor<br />
|Zigbee<br />
|Generic Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Motion Sensor<br />
|ZS1100400<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Linkind</sup>===<br />
|Smart Plug<br />
|WS1900000-IN-US<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Caséta Dimmers and Switches|| ||Dimmer||LAN||Lutron Dimmer, Lutron Switch||Lutron Integration||Caséta SmartBridge Pro<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Caséta SmartBridge Pro|| ||Bridge||LAN||Lutron Keypad||Lutron Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Pico Remotes|| ||Button Controller||LAN||Lutron Pico, Lutron Fast Pico||Lutron Integration||Caséta SmartBridge Pro or Radio RA2<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Dimmers and Switches|| ||Dimmer||LAN||Lutron Dimmer, Lutron Switch||Lutron Integration||RadioRA2 Select or RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Keypads|| ||Keypad||LAN||Lutron Keypad||Lutron Integration||RadioRA2 Select or RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Main Repeater|| ||Repeater||LAN|| ||Lutron Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Motion Sensors|| ||Motion Sensor||LAN||Lutron Motion Sensor||Lutron Integration||RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Select|| ||Bridge||LAN||Lutron Keypad||Lutron Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 VCRX Garage Controller|| ||Garage Controller||LAN||Lutron Keypad||Lutron Integration||RadioRA2 Main Repeater or RadioRA2 VCRX Visor Controller Receiver<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 VCRX Visor Controller Receiver<br />
|<br />
|Bridge<br />
|LAN<br />
|Lutron VCRX<br />
|Lutron Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Serena Shades|| ||Shade Control||LAN||Lutron Shade||Lutron Integration||RadioRA2 Select, RA2 Main Repeater or Caséta SmartBridge Pro<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Sivoia QS Triathlon Shades|| ||Shade Control||LAN||Lutron Shade||Lutron Integration||RadioRA2 Select, RA2 Main Repeater or Caséta SmartBridge Pro<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|RadioRA2 Thermostat|| ||Thermostat||LAN||Lutron Thermostat||Lutron Integration||RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron |<sup>Lutron</sup>]]===<br />
|Lutron Fan Control|| ||Fan Controller||LAN||Lutron Fan Control||Lutron Integration||RadioRA2 Select, RA2 Main Repeater or Caséta SmartBridge Pro<br />
|-<br />
|<br />
===<sup>Lutron</sup>===<br />
|HVAC Controller<br />
|LR-HVAC-1<br />
|HVAC Controller<br />
|LAN<br />
|Lutron HVAC Controller<br />
|Lutron Integration<br />
|RA2 Main Repeater<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lutron|<sup>Lutron</sup>]]===<br />
|Aurora Controller||Z3-1BRL||Button Controller||Zigbee||Lutron Aurora Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Lux |<sup>Lux</sup>]]===<br />
|Zigbee Thermostat||KONOz||Thermostat||Zigbee||LUX Zigbee Thermostat|| ||<br />
|-<br />
|<br />
===<sup>Marantz</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Denon AVR|| ||<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|In-Wall Smart Switch<br />
|MS10Z<br />
|Switch<br />
|Z-Wave<br />
|EVA LOGIK In-Wall Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|Smart Switch<br />
|MS10ZS<br />
|Switch<br />
|Z-Wave<br />
|Minoston MS10ZS Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|Smart Dimmer Switch<br />
|MS11ZS<br />
|Dimmer<br />
|Z-Wave<br />
|Minoston MS11ZS Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|2-Channel Plug<br />
|MP20Z<br />
|Outlet<br />
|Z-Wave<br />
|Inovelli 2-Channel Plug<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Minoston</sup>===<br />
|Mini Plug-in Outlet<br />
|MP21Z<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#MCO Home |<sup>MCOHome</sup>]]===<br />
|Dimmer Switch|| ||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|Mode Lighting<br />
|eDIN+ Network Processor Module<br />
|DIN-NPU-00-01-PLUS<br />
|Network Controller<br />
|LAN<br />
|eDIN Network Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Contact Sensor|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Outlet|| ||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Plugin Dimmer|| ||Dimmer||Z-Wave||Generic Z-Wave Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plugin On/Off||11995||Outlet||Z-Wave||Generic Z-Wave Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus PIR Motion Detector With Temperature Sensor||15271||Motion Sensor||Z-Wave||Generic Z-Wave Motion/Temperature Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus PIR Multi Sensor||15902||Motion Sensor||Z-Wave||Zooz 4-in-1 Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus Recessed Door/Window Sensor||15268||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus Smart Plug and Repeater with 2 USB ports||27481||Outlet||Z-Wave||Zooz Power Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Monoprice |<sup>Monoprice</sup>]]===<br />
|Z-Wave Plus Door/Window Sensor||15270||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NanoLeaf|<sup>NanoLeaf</sup>]]===<br />
|Aurora Light Panels|| ||Bulb||LAN||Nanoleaf Aurora|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NanoLeaf|<sup>NanoLeaf</sup>]]===<br />
|Canvas Light Panels|| ||Bulb||LAN||Nanoleaf Aurora|| ||<br />
|-<br />
|<br />
===<sup>NEEO</sup>===<br />
|NEEO Remote|| ||AVR Remote||LAN||NEEO Remote|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Door/Window Sensor||NAS-DS02ZU||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Door/Window Sensor||NAS-DS01ZE||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Motion Sensor||NAS-PD01ZU-T||Motion Sensor||Z-Wave||Neo Coolcam Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Power Plug||NAS-WR02Z*||Outlet||Z-Wave||Neo Coolcam Power Plug|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Remote Control 1||NAS-RC03ZU||Button Controller||Z-Wave||Neo Coolcam Remote Control|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Neo |<sup>NEO</sup>]]===<br />
|NEO Coolcam Remote Control 4||NAS-RC03ZU||Button Controller||Z-Wave||Neo Coolcam Remote Control|| ||<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Light Switch 1||NAS-SC02ZU-1||Switch||Z-Wave||Neo Coolcam Light Switch|| ||<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Light Switch 2||NAS-SC02ZU-2||Switch||Z-Wave||Neo Coolcam Light Switch|| ||<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Door Sensor 700<br />
|NAS-DS07ZU<br />
|Contact Sensor<br />
|Z-Wave<br />
|Neo Door Sensor 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Motion Sensor 700<br />
|NAS-PD07ZU<br />
|Motion Sensor<br />
|Z-Wave<br />
|Neo Motion Sensor 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Water Sensor 700<br />
|NAS-WS02ZU<br />
|Water Sensor<br />
|Z-Wave<br />
|Neo Water Sensor 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>NEO</sup>===<br />
|Neo Coolcam Z-Wave Repeater 700<br />
|NAS-RP02Z1U<br />
|Repeater<br />
|Z-Wave<br />
|Neo Z-Wave Repeater 700<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nexia</sup>===<br />
|Scene Controller<br />
|NX1000<br />
|Button Controller<br />
|Z-Wave<br />
|Nexia NX1000<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NodOn |<sup>NodOn</sup>]]===<br />
|Octan Remote||CRC-3US-1||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NodOn |<sup>NodOn</sup>]]===<br />
|Soft Remote||CRC-3US-6||Button Controller||Z-Wave||Generic Z-Wave Button Controller|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Dimmer<br />
|HGZB-021<br />
|Dimmer<br />
|Zigbee<br />
|Nue Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Switch<br />
|HGZB-01A<br />
|Switch<br />
|Zigbee<br />
|Nue Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee 3.0 Light Controller<br />
|HGZB-07A<br />
|Bulb<br />
|Zigbee<br />
|Generic ZigBee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|1 Gang Light Switch||HGZB-41||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|2 Gang Light Switch||HGZB-42||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|3 Gang Light Switch||HGZB-43||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|4 Gang Light Switch||HGZB-44||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Dimmer||HGZB-4D||Dimmer||Zigbee||Nue Zigbee Dimmer|| ||<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Fan Contoller<br />
|HGZB-FS<br />
|Fan Controller<br />
|Zigbee<br />
|Nue Zigbee Fan Controller<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|Zigbee Scene Contoller<br />
|HGZB-1S, HGZB-2S, HGZB-4S<br />
|Button Controller<br />
|Zigbee<br />
|Nue Zigbee Fan Controller<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Nue</sup>===<br />
|RGBW Strip Controller<br />
|ZB-18A<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Door/Window Sensor||NCZ-3011-HA||Contact Sensor||Zigbee||NYCE Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Garage Door (Tilt) Sensor||NCZ-3014-HA||Contact Sensor||Zigbee||NYCE Iris Tilt Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Motion Sensor||NCZ-3041-HA||Motion Sensor||Zigbee||NYCE Motion Sensor Series|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Celing Motion Censor||NCZ-3043-HA||Motion Sensor||Zigbee||NYCE Motion Sensor Series|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#NYCE |<sup>NYCE</sup>]]===<br />
|Curtain Motion Sensor||NCZ-3045-HA||Motion Sensor||Zigbee||NYCE Motion Sensor Series|| ||<br />
|-<br />
|<br />
===<sup>Onkyo</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Onkyo AVR|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Orbit |<sup>Orbit</sup>]]===<br />
|Smart Hose Faucet Timer||27087||Irrigation Controller||Zigbee||Orbit Hose Water Timer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Orbit |<sup>Orbit</sup>]]===<br />
|12-Station Sprinkler Controller||27396||Irrigation Controller||Zigbee||Orbit 12-Station Sprinkler Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Orvibo |<sup>Orvibo</sup>]]===<br />
|Motion Sensor||SN11||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify Flex RGBW|| ||Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Smart+ Classic E27 Multicolor|| ||Bulb||Zigbee||Advanced Zigbee RGBW Bulb<br />
| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Classic B40 Tunable White 60W|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Flood BR30 Tunable White|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Recessed Kit RT 5/6 Tunable|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Lightify LED Tunable White 60W|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#OSRAM|<sup>Osram</sup>]]===<br />
|Smart Outdoor Plug|| ||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===<sup>PEQ</sup>===<br />
|Contact Sensor||3300||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===<sup>PEQ</sup>===<br />
|Motion Sensor||3305||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===<sup>PEQ</sup>===<br />
|Moisture Sensor||3315||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Dimmer Switch||73698<br />
|Button Controller||Zigbee||Philips Dimmer Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Dimmer Switch V2<br />
|562777<br />
|Button Controller<br />
|Zigbee<br />
|Philips Dimmer Button Controller V2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Bloom Lights|| ||Bulb||Zigbee||Generic Zigbee RGB Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Bridge|| ||Bridge||LAN|| ||Hue Bridge Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Living Colors Lights|| ||Bulb||Zigbee||Generic Zigbee RGB Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Lux|| ||Bulb||Zigbee||Generic Zigbee RGBW Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Motion Sensor||473389||Motion Sensor||Zigbee||Hue Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Outdoor Motion Sensor||541730||Motion Sensor||Zigbee||Hue Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Smart Plug<br />
|046677552343<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Smart Button<br />
|046677553715<br />
|Button Controller<br />
|Zigbee<br />
|Hue Smart Button<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|Strip Lights|| ||Bulb||Zigbee||Generic Zigbee RGB Light||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|White and Color Ambiance LightStrip|| ||Bulb||Zigbee||Advanced Zigbee RGBW Bulb<br />
|Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Philips Hue|<sup>Philips Hue</sup>]]===<br />
|White Ambiance|| ||Bulb||Zigbee||Generic Zigbee CT Bulb (dev)||Hue Bridge Integration||Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===<sup>Philips Hue</sup>===<br />
|White and Color Ambiance Bulb<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|Hue Bridge Integration<br />
|Philips Hue Bridge (Optional, but recommended)<br />
|-<br />
|<br />
===<sup>Pioneer</sup>===<br />
|Audio Video Receivers|| ||AVR||LAN||Pioneer AVR|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Powerly|<sup>Powely</sup>]]===<br />
|Thermostat<br />
|<br />
|Thermostat<br />
|Z-Wave<br />
|Generic Z-Wave Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Pushover|<sup>Pushover</sup>]]===<br />
|Pushover|| ||Notification||Cloud||Pushover driver|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Relay||<br />
|Relay||Z-Wave||Generic Z-Wave Relay|| ||<br />
|-<br />
|Qubino<br />
|EU Smart Meter<br />
|XMNHTD1<br />
|Energy Meter<br />
|Z-Wave<br />
|Qubino Smart Meter<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush 2 Relay||ZMNHBD3||Relay||Z-Wave||Qubino 2 Relay Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush 1D Relay||ZMNHND3||Relay||Z-Wave||Qubino 1D Relay Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush Shutter||ZMNHCD3||Relay||Z-Wave||Qubino Shutter Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush Shutter DC||ZMNHOD3||Relay||Z-Wave||Qubino Shutter Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush ON/OFF Thermostat||ZMNHID3||Thermostat||Z-Wave||Qubino Thermostat Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush 1 Relay||ZMNHAD3||Relay||Z-Wave||Qubino 1 Relay Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Flush Dimmer||ZMNHDD3||Dimmer||Z-Wave||Qubino Dimmer Module|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Qubino|<sup>Qubino</sup>]]===<br />
|Mini Dimmer<br />
|ZMNHHD3<br />
|Dimmer<br />
|Z-Wave<br />
|Qubino Mini Dimmer<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Luxy Smart Light<br />
|ZMNHQD1<br />
|Bulb<br />
|Z-Wave<br />
|Qubino Luxy Smart Light<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Luxy Smart Switch<br />
|ZMNKAD1<br />
|Switch<br />
|Z-Wave<br />
|Qubino Luxy Smart Switch<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Flush On/Off Thermostat 2<br />
|ZMNKID1<br />
|Thermostat<br />
|Z-Wave<br />
|Qubino Flush Thermostat 2<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Din Dimmer<br />
|ZMNHSD1<br />
|Dimmer<br />
|Z-Wave<br />
|Qubino DinDimmer<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version Flush Dimmer 0-10V<br />
|ZMNHVD1<br />
|Dimmer<br />
|Z-Wave<br />
|Qubino Flush Dimmer 0-10V<br />
|<br />
|<br />
|-<br />
|Qubino<br />
|EU version 3-Phase Smart Meter<br />
|ZMNHXD1<br />
|Energy Meter<br />
|Z-Wave<br />
|Qubino 3-Phase Smart Meter<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Quotra|<sup>Quotra</sup>]]===<br />
|Quotra Wireless Smart Dimmer|| ||Dimmer||Zigbee||Generic Zigbee Dimmer|| ||<br />
|-<br />
|<br />
===<sup>Rachio</sup>===<br />
| || ||Irrigation Controller||Cloud|| ||Rachio Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Radio Thermostat Company of America |<sup>Radio</sup>]]===<br />
|CT100 Thermostat||CT100||Thermostat||Z-Wave||Generic Z-Wave Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Radio Thermostat Company of America |<sup>Radio</sup>]]===<br />
|CT101 Thermostat||CT101||Thermostat||Z-Wave||Radio Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Radio Thermostat Company of America |<sup>Radio</sup>]]===<br />
|Thermostat Z-Wave USNAP Module|| ||Thermostat||Z-Wave||Generic Z-Wave Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Remotec|<sup>Remotec</sup>]]===<br />
|ZFM-80 relay||ZFM-80||Relay||Z-Wave||Remotec ZFM-80|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Remotec|<sup>Remotec</sup>]]===<br />
|ZRC-90 Button Controller||ZRC-90||Button Controller||Z-Wave||Remotec ZRC-90|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Remotec|<sup>Remotec</sup>]]===<br />
|ZXT600 AC Controller<br />
|ZXT600<br />
|Thermostat<br />
|Z-Wave<br />
|Remotec Z-Wave-to-AC IR Extender ZXT600<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|4 Channel Dimming Controller<br />
|ZB-1003<br />
|Dimmer<br />
|Zigbee<br />
|RGBgenie Micro Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|RGBW Color Controller<br />
|ZB-1025<br />
|Dimmer<br />
|Zigbee<br />
|RGBgenie Micro Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>RGBgenie</sup>===<br />
|3 Scene Color Touch Panel and Dimmer<br />
|ZB-3009, ZB-3010<br />
|Dimmer<br />
|Zigbee<br />
|RGBGenie Controller ZB-3009/10<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>RGBgenie</sup>===<br />
|4 Zone 2 Scene Remote<br />
|ZB-5004<br />
|Button Controller<br />
|Zigbee<br />
|RGBGenie Controller ZB-5004<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Color Controller Panel||ZB-3026||Button Controller||Zigbee||RGBgenie Controller ZB-3026|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Channel Trailing Edge Dimmer<br />
|ZB-4002<br />
|Dimmer<br />
|Zigbee<br />
|RGBgenie Micro Zigbee Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Channel Micro Controller and Lamp Module<br />
|ZB-4003<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|5 Zone Remote and Dimmer<br />
|ZB-5001<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|3 Zone Color Touch Panel||ZB-5027||Button Controller||Zigbee||RGBgenie Controller ZB-3027|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Color Remote||ZB-5028||Button Controller||Zigbee||RGBgenie Controller ZB-5028|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single Color Wall Mounted Remote Controller||ZB-5121||Button Controller||Zigbee||RGBgenie Controller ZB-512x|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Color Micro Remote with single scene recall||ZB-5122||Button Controller||Zigbee||RGBgenie Controller ZB-5122|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Single color controller<br />
|ZW-1001<br />
|Dimmer<br />
|Z-Wave<br />
|Generic Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|RGBW Color Controller<br />
|ZW-1002<br />
|Dimmer<br />
|Z-Wave<br />
|Generic Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Micro Controller and Lamp Module<br />
|ZW-4001<br />
|Dimmer<br />
|Z-Wave<br />
|RGBgenie Z-Wave Micro Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Micro Switch<br />
|ZW-4004<br />
|Switch<br />
|Z-Wave<br />
|RGBgenie Micro Switch ZW-4004<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#RGBgenie|<sup>RGBgenie</sup>]]===<br />
|Remote<br />
|ZW-5002<br />
|Button Controller<br />
|Z-Wave<br />
|<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Contact Sensor V1<br />
|4SD1S70EN0<br />
|Contact Sensor<br />
|Z-Wave<br />
|Ring Alarm Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Contact Sensor V2<br />
|4SD2SZ0EN0<br />
|Contact Sensor<br />
|Z-Wave<br />
|Ring Alarm Contact Sensor G2<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|'''Ring'''<br />
|Ring Flood & Freeze Sensor<br />
|4SF1S8-0EN0<br />
|Water Sensor<br />
|Z-Wave<br />
|Ring Flood Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Hardwired Retrofit Kit<br />
|4AW1SZ0EN0<br />
|Multisensor<br />
|Z-Wave<br />
|Ring Alarm Retrofit<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Keypad V1<br />
|4AK1S70EN0<br />
|Keypad<br />
|Keypad<br />
|Ring Alarm Keypad G1<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Keypad V2<br />
|4AK1SZ0EN0<br />
|Keypad<br />
|Keypad<br />
|Ring Alarm Keypad G2<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Motion Sensor V1<br />
|4SP1S70EN0<br />
|Motion Sensor<br />
|Z-Wave<br />
|Ring Alarm Motion Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Motion Sensor V2<br />
|4SP2SZ0EN0<br />
|Motion Sensor<br />
|Z-Wave<br />
|Ring Alarm Motion Sensor G2<br />
|<br />
|[https://hubitat.com/products Model C-7 required]<br />
|-<br />
|'''Ring'''<br />
|Ring Outdoor Siren<br />
|<br />
|Siren<br />
|Z-Wave<br />
|Ring Outdoor Siren<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Range Extender V1<br />
|4AR1S70EN0<br />
|Repeater<br />
|Z-Wave<br />
|Ring Alarm Range Extender<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Ring|<sup>Ring</sup>]]===<br />
|Ring Alarm Smoke/CO Listener<br />
|4SS1S80EN0<br />
|Smoke/CO Detector<br />
|Z-Wave<br />
|Ring Alarm Smoke/CO Listener<br />
|<br />
|<br />
|- <br />
|<br />
===[[Join and Reset Instructions#Salus|<sup>Salus</sup>]]===<br />
|Smart Plug||SP600||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Outlet (2017 Model)<br />
|F-OUT-US-2<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Bulb<br />
|GP-LBU019BBAWU<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Button V5||IM6001-BTP<br />
|Button Controller||Zigbee||Samsung Zigbee Button|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Motion Sensor V5||IM6001-MTP<br />
|Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Water Leak Sensor V5||IM6001-WLP<br />
|Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Multi Sensor V5||IM6001-MPP<br />
|Contact Sensor||Zigbee||SmartThings Multipurpose Sensor V5|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Samsung SmartThings|<sup>Samsung SmartThings</sup>]]===<br />
|Outlet V5||IM6001-OTP<br />
|Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|Doorbell Sensor<br />
|<br />
|Doorbell Sensor<br />
|Zigbee<br />
|SAGE Doorbell Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|Light Switch Controller<br />
|<br />
|Button Controller<br />
|Zigbee<br />
|SAGE Light Switch Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|A19 Bulb<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SAGE|<sup>SAGE</sup>]]===<br />
|BR30 Bulb<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Samotech</sup>===<br />
|Zigbee Control Module<br />
|MS104Z<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Classic Bulb||E11-G13||Bulb||Zigbee||Sengled Element Classic|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Classic Bulb||E11-G14||Bulb||Zigbee||Sengled Element Classic|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Multicolor Bulb||E11-N1EA||Bulb||Zigbee||Sengled Element Color Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Multicolor Light Strip||E1G-G8E||Bulb||Zigbee||Sengled Element Color Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Element Plus Bulb||Z01-A19NAE26||Bulb||Zigbee||Sengled Element Plus|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Sengled Element Classic with motion||E13-N11||Bulb||Zigbee||Sengled Element Classic with motion|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Smart Window and Door Sensor||E1D-G73||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Smart Plug||E1C-NB6||Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sengled|<sup>Sengled</sup>]]===<br />
|Button Controller<br />
|E1E-G7F<br />
|Button Controller<br />
|Zigbee<br />
|Sengled Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sensative|<sup>Sensative</sup>]]===<br />
|Strips Guard|| ||Contact Sensor||Z-Wave||Generic Z-Wave Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sensative|<sup>Sensative</sup>]]===<br />
|Strips Drips|| ||Water Sensor||Z-Wave||Strips Multi-Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sensative|<sup>Sensative</sup>]]===<br />
|Strips Comfort|| ||Temperature Sensor||Z-Wave||Strips Multi-Sensor|| ||<br />
|-<br />
|<br />
===<sup>sharptools.io</sup>===<br />
| || ||Dashboard||Cloud|| ||SharpTools||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly 1<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly 1PM<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly 2.5<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly Bulb<br />
|<br />
|Bulb<br />
|LAN<br />
|Shelly WiFi RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly DUO<br />
|<br />
|Bulb<br />
|LAN<br />
|Shelly WiFi CT Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly Plug<br />
|<br />
|Outlet<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|Shelly Plug S<br />
|<br />
|Outlet<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|WiFi Dimmer<br />
|<br />
|Dimmer<br />
|LAN<br />
|Shelly WiFi Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Shelly|<sup>Shelly</sup>]]===<br />
|WiFi Switch<br />
|<br />
|Switch<br />
|LAN<br />
|Shelly WiFi Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Dimmer||DM2500ZB||Dimmer||Zigbee||Sinope Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Electrical Load Controller||RM3250ZB||Switch||Zigbee||Sinope load controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Plug<br />
|SP2600ZB<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|In-Wall Outlet<br />
|SP2610ZB<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Switch<br />
|SW2500ZB<br />
|Switch<br />
|Zigbee<br />
|Sinope Switchq<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart thermostat for electric heating||TH1123ZB||Thermostat||Zigbee||Sinope TH1124ZB (4KW) Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart thermostat for electric heating||TH1124ZB||Thermostat||Zigbee||Sinope TH1124ZB (4KW) Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Floor Heating Thermostat||TH1300ZB||Thermostat||Zigbee||Sinope TH1300ZB Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Low Voltage Thermostat||TH1400ZB||Thermostat||Zigbee||Sinope TH1400ZB Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Double-Pole Thermostat<br />
|TH1500ZB<br />
|Thermostat<br />
|Zigbee<br />
|Sinope TH1400ZB Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Valve||VA4200WZ||Valve||Zigbee||Sinope water valve|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Valve<br />
|VA4220ZB<br />
|Valve<br />
|Zigbee<br />
|Sinope water valve<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Leak Detector||WL4200||Water Sensor||Zigbee||Sinope Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sinope|<sup>Sinope</sup>]]===<br />
|Smart Water Leak Detector with Sensor||WL4200S||Water Sensor||Zigbee||Sinope Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Contact Sensor||3300-S||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|SmartSense Multi Sensor||STSS-MULT-001||Contact Sensor||Zigbee||SmartSense Multi V1|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Multi Sensor (2015 model)<br />
|F-SS-MULT-001<br />
|Contact Sensor||Zigbee||SmartSense Multi Sensor V4|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Multi Sensor (2016 model)<br />
|F-MLT-US-2<br />
|Contact Sensor<br />
|Zigbee<br />
|SmartSense Multi Sensor V4<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Multi Sensor V4||STS-MLT-250||Contact Sensor||Zigbee||SmartSense Multi Sensor V4|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Humidity Sensor||3310-S||Humidity Sensor||Zigbee||SmartThings Humidity Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|SmartSense Moisture Sensor|| ||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Water Leak Sensor v4 (2015)|| ||Water Sensor||Zigbee||Generic Zigbee Moisture Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|SmartSense Motion Sensor|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Motion Sensor V2|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Motion Sensor V3|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Motion Sensor V4|| ||Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Presence Sensor V2|| ||Presence Sensor||Zigbee||SmartThings Presence Sensor V2|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#SmartThings|<sup>SmartThings</sup>]]===<br />
|Presence Sensor V4|| ||Presence Sensor||Zigbee||SmartThings Presence Sensor V4|| ||<br />
|-<br />
|<br />
===<sup>Somfy</sup>===<br />
|2 Button Controller|| ||Button Controller||Z-Wave||Somfy 2 Button Controller|| ||<br />
|-<br />
|<br />
===<sup>Sonos</sup>===<br />
|Speakers|| ||Speaker||LAN|| ||Sonos Integration||<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Button Controller<br />
|SNZB-01<br />
|Button Controller<br />
|Zigbee<br />
|Sonoff Zigbee Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Temperature/Humidity Sensor<br />
|SNZB-02<br />
|Temperature Sensor<br />
|Zigbee<br />
|Sonoff Zigbee Temperature/Humidity Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Motion Sensor<br />
|SNZB-03<br />
|Motion Sensor<br />
|Zigbee<br />
|Generic Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|Zigbee Contact Sensor<br />
|SNZB-04<br />
|Contact Sensor<br />
|Zigbee<br />
|Sonoff Zigbee Contact Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|S31 Lite Zigbee Smart Plug US<br />
|S31 Lite Zigbee<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Sonoff</sup>===<br />
|ZBMINI Relay Module<br />
|ZBMINI<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Power reporting outlet<br />
|HK-PLUG-A EU<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Outlet Strip<br />
|HK-LN-SOCKET-A EU<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Mult-Endpoint Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|4 in 1 Universal LED Controller<br />
|ZG1029-5C<br />
|Dimmer<br />
|ZigBee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Zigbee Smart Plug<br />
|ZG9021A<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color 8 button controller<br />
|ZG2833K8_EU05<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Dimmer Module||ZG9101SAC-HP-Dimmer||Dimmer||Zigbee||RGBGenie Z-Wave Micro Controller<br />
| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Relay Module<br />
|ZG9101SAC-HP-Switch<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|AC Phase-Cut Dimmer<br />
|ZV9101SAC-HP<br />
|Dimmer<br />
|Z-Wave<br />
|RGBGenie Z-Wave Micro Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Relay Module<br />
|ZV9101SAC-HP-Switch<br />
|Switch<br />
|Z-Wave<br />
|RGBGenie Z-Wave Micro Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|4 Channels CV 100W Dimmable Driver<br />
|SRP-ZG9105-24-100CVF<br />
|Dimmer<br />
|Zigbee<br />
|Advanced Zigbee RGBW Bulb<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|In-Wall Smart Switch<br />
|ZV9100<br />
|Switch<br />
|Z-Wave<br />
|RGBgenie Micro Switch ZW-4004<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Door/Window Sensor<br />
|ZV9010A<br />
|Contact Sensor<br />
|Z-Wave<br />
|Generic Z-Wave Door Window Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color remote<br />
|ZG9001K5-5C<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Controller ZB-5122<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color 4-Group remote<br />
|ZG9001K8-DIM<br />
|Button Controller<br />
|Zigbee<br />
|RGBgenie Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color remote secondary controller light switch<br />
|ZV9001K8-DIM-G4<br />
|Button Controller<br />
|Z-Wave<br />
|Generic Z-Wave Plus Button Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Dimmer controller<br />
|ZG9001K12-DIM-Z3<br />
|Button Controller<br />
|Zigbee<br />
|Sunricher Zigbee Wireless Dimmer Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Single color remote secondary controller<br />
|ZV9001K12-DIM-Z4<br />
|Button Controller<br />
|Z-Wave<br />
|RGBGenie Z-Wave Remote<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Dim Remote Control<br />
|ZV9001K12<br />
|Button Controller<br />
|Z-Wave<br />
|RGBGenie Z-Wave Remote ZW-5009<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sunricher|<sup>Sunricher</sup>]]===<br />
|Smart Plug<br />
|ZV9020A<br />
|Outlet<br />
|Z-Wave<br />
|Sunricher SR-ZV9020A Z-Wave Smart Plug<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Outlet||72922<br />
|Outlet||Zigbee||Generic Zigbee Outlet|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Motion Sensor||72923<br />
|Motion Sensor||Zigbee||Generic Zigbee Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Dimmer||73743<br />
|Button Controller||Zigbee||Sylvania Dimmer Switch Button Controller|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ 4 Button Switch||74099<br />
|Button Controller||Zigbee||Lightify Smart Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Contact Sensor||74388<br />
|Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ A19 RGBW|| ||Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Outdoor RGBW Flex||73685<br />
|Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Flex RGBW||74521<br />
|Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ Flex SL RGBW<br />
|<br />
|Bulb<br />
|Zigbee<br />
|Generic Zigbee RGBW Light<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ BR30 RGBW||74988<br />
|Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ RT5/6 RGBW|| ||Bulb||Zigbee||Generic Zigbee RGBW Light|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Sylvania|<sup>Sylvania</sup>]]===<br />
|Smart+ A19 Dimmable|| ||Bulb||Zigbee||Generic Zigbee Bulb|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Telguard|<sup>Telguard</sup>]]===<br />
|Garage Door Control Switch||GDC1||Switch||Z-Wave||Generic Z-Wave Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Telldus|<sup>Telldus</sup>]]===<br />
|Outlet Switch||TZWP-100<br />
|Outlet||Z-Wave||Generic Z-Wave Smart Switch|| ||<br />
|-<br />
|Telstra<br />
|Smart Power Plug<br />
|SZ-ESW01-AU<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Third Reality|<sup>Third Reality</sup>]]===<br />
|Reality Switch|| ||Switch||Zigbee||Generic Zigbee Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#TKB|<sup>TKB</sup>]]===<br />
|TKB Dimmer Socket||TZ67E||Dimmer||Z-Wave||Generic Z-Wave Smart Dimmer|| ||<br />
|-<br />
|<br />
===<sup>Trane</sup>===<br />
|Thermostat<br />
|XR524<br />
|Thermostat<br />
|Z-Wave<br />
|Generic ZWave Thermostat<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|Zigbee Touch Wall Switch (1,2,3 and 4 gang)<br />
|Z801-01US, Z802-01US, SK-Z803-01US<br />
|Switch<br />
|Zigbee<br />
|Generic Zigbee Multi-Endpoint Switch<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|Zigbee Motion Sensor<br />
|ZXZPIR-02<br />
|Motion Sensor<br />
|Zigbee<br />
|Zigbee Motion Sensor (no temp)<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|ODM/OEM outlets<br />
|<br />
|Outlet<br />
|Zigbee<br />
|Generic Zigbee Outlet<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Tuya Smart</sup>===<br />
|Zigbee Water Valve<br />
|<br />
|Valve<br />
|Zigbee<br />
|Sinope water valve<br />
|<br />
|<br />
|-<br />
|UltraPro<br />
|Smart Dimmer<br />
|39351<br />
|Dimmer<br />
|Z-Wave<br />
|GE Enbrighten Z-Wave Smart Dimmer<br />
|<br />
|<br />
|-<br />
|UltraPro<br />
|Smart Switch<br />
|39348, 39354<br />
|Switch<br />
|Z-Wave<br />
|Generic Z-Wave Plus Scene Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Utilitech |<sup>Utilitech</sup>]]===<br />
|Siren|| ||Siren||Z-Wave||Linear/Vision Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Vision|<sup>Vision</sup>]]===<br />
|Siren||zm1601US-3, zm1601US-5||Siren||Z-Wave||Linear/Vision Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Vision|<sup>Vision</sup>]]===<br />
|Vision Shock Sensor||ZS5101||Acceleration Sensor||Z-Wave||Generic Z-Wave Acceleration Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Visonic|<sup>Visonic</sup>]]===<br />
|Window Door Sensor||MCT-340 E, MCT-340 SMA||Contact Sensor||Zigbee||Generic Zigbee Contact Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#WaterCop|<sup>WaterCop</sup>]]===<br />
|Shutoff Valve||192390.02||Valve||Z-Wave||Generic Z-Wave Valve|| ||<br />
|-<br />
|'''Wally'''<br />
|Wally Sensor<br />
|<br />
|Multisensor<br />
|Zigbee<br />
|Wally Multisensor<br />
|<br />
|<br />
|-<br />
|'''Wally'''<br />
|Wally Shutoff Valve<br />
|<br />
|Valve<br />
|Zigbee<br />
|Wally shutoff valve<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>Weather Underground</sup>===<br />
|Weather Underground|| ||Notification||Cloud||WeatherUnderground|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Wireless|<sup>Wireless</sup>]]===<br />
|Smoke Detector||ZWN-SD||Smoke Detector||Z-Wave||Generic Z-Wave Smoke Detector|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Xfinity|<sup>Xfinity</sup>]]===<br />
|Xfinity 3400-X Keypad||3400||Keypad||Zigbee||Centralitle Keypad|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Push Button Lever Lock||YRD210||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Assure Keypad Deadbolt||YRD216||Lock||Zigbee||Generic Zigbee Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Assure Connected||YRD226||Lock||Z-Wave||Generic Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Lever Lock||YRL236, YRL256||Lock||Zigbee|| Yale Lock |Generic Zigbee Lock<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Conexis L1||Conexis L1||Lock||Z-Wave||Yale Conexis L1 Z-Wave Lock|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yale|<sup>Yale</sup>]]===<br />
|Yale Assure Lock SL<br />
|YRD256<br />
|Lock<br />
|Z-Wave<br />
|Generic Z-Wave Lock<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Mono Bulb|| ||Bulb||LAN||Yeelight Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Mono 5<br />
|YLDP11YL/YLDP12YL<br />
|Bulb<br />
|LAN<br />
|Yeelight Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Smart LED Bulb (CT)|| ||Bulb||LAN||Yeelight CT Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Smart LED Bulb (Color and CT)|| ||Bulb||LAN||Yeelight RGBW Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Smart LED Bulb (Color)|| ||Bulb||LAN||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Bedside Lamp|| ||Bulb||LAN||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===<sup>Yeelight</sup>===<br />
|ColorA<br />
|<br />
|Bulb<br />
|LAN<br />
|Yeelight RGB Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Color 6|| ||Bulb||LAN||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Ceiling 4|| ||Bulb||Bulb||Yeelight RGB Bulb||Yeelight Integration||<br />
|-<br />
|<br />
===<sup>Yeelight</sup>===<br />
|Ceiling 10<br />
|YLXD10YL<br />
|Bulb<br />
|Bulb<br />
|Yeelight RGB Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Yeelight|<sup>Yeelight</sup>]]===<br />
|Ceiling 15<br />
|YLXD42YL<br />
|Bulb<br />
|LAN<br />
|Yeelight RGB Bulb<br />
|Yeelight Integration<br />
|<br />
|-<br />
|<br />
===<sup>Zemismart</sup>===<br />
|2 Gang Switch||ZM-02-DK||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===<sup>Zemismart</sup>===<br />
|Zigbee Switch||ZM-01-DK||Switch||Zigbee||Nue Zigbee Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zen|<sup>Zen</sup>]]===<br />
|Thermostat|| ||Thermostat||Zigbee||Zen Thermostat|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zipato|<sup>Zipato</sup>]]===<br />
|Siren||PH-PSE02||Siren||Z-Wave||Zipato Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zipato|<sup>Zipato</sup>]]===<br />
|Bulb 2<br />
|RGBW2<br />
|Bulb<br />
|Z-Wave<br />
|Zipato Bulb 2<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZLINK|<sup>ZLINK</sup>]]===<br />
|Water Leak and Temperature Sensor<br />
|ZL-LD-100<br />
|Water Sensor<br />
|Z-Wave<br />
|Zlink Water Leak and Temperature Sensor<br />
|<br />
|<br />
|-<br />
|<br />
===<sup>ZLINK</sup>===<br />
|Appliance Switch<br />
|ZL-PA-100<br />
|Outlet<br />
|Z-Wave<br />
|Generic Z-Wave outlet<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZLINK|<sup>ZLINK</sup>]]===<br />
|In-Wall Dimmer||ZL-WD-100<br />
|Dimmer||Z-Wave||Generic Z-Wave CentralScene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZLINK|<sup>ZLINK</sup>]]===<br />
|In-Wall Switch||ZL-WS-100<br />
|Switch||Z-Wave||Generic Z-Wave CentralScene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Smart Plug||ZEN06||Outlet||Z-Wave||Zooz Power Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Power Switch||ZEN15||Switch||Z-Wave||Zooz Power Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|MultiRelay<br />
|ZEN16<br />
|Switch<br />
|Z-Wave<br />
|Zooz MultiRelay<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Universal Relay<br />
|ZEN17<br />
|Relay<br />
|Z-Wave<br />
|Zooz Zen17 Universal Relay<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Power Strip||ZEN20||Power Strip||Z-Wave||Zooz Power Strip|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Power Strip VER 2.0||ZEN20||Power Strip||Z-Wave||Zooz Power Strip|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Smart Switch||ZEN21||Switch||Z-Wave||Zooz Central Scene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Dimmer Switch||ZEN22||Dimmer||Z-Wave||Zooz Central Scene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz On/Off Toggle||ZEN23||Switch||Z-Wave||Zooz Central Scene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz Dimmer Toggle||ZEN24||Dimmer||Z-Wave||Zooz Central Scene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz S2 On/Off Switch||ZEN26||Switch||Z-Wave||Zooz Central Scene Switch|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz S2 Dimmer||ZEN27||Dimmer||Z-Wave||Zooz Central Scene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz Double Switch<br />
|ZEN30<br />
|Switch<br />
|Z-Wave<br />
|Zooz Double Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz RGBW Dimmer<br />
|ZEN31<br />
|Dimmer<br />
|Z-Wave<br />
|Zooz RGBW Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Scene Controller Switch<br />
|ZEN32<br />
|Switch<br />
|Z-Wave<br />
|Zooz Zen32 Scene Controller<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz Remote Switch<br />
|ZEN34<br />
|Button Controller<br />
|Z-Wave<br />
|Zooz Remote Switch Zen34<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Light Switch<br />
|ZEN71<br />
|Switch<br />
|Z-Wave<br />
|Zooz Zen71 Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Dimmer<br />
|ZEN72<br />
|Dimmer<br />
|Z-Wave<br />
|Zooz Zen72 Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Wall Switch<br />
|ZEN76<br />
|Switch<br />
|Z-Wave<br />
|Zooz Zen76 Switch<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz 700 Series Dimmer Switch<br />
|ZEN77<br />
|Dimmer<br />
|Z-Wave<br />
|Zooz Zen77 Dimmer<br />
|<br />
|<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Motion Sensor||ZSE02||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Motion and Light Mini Sensor||ZSE09||Motion Sensor||Z-Wave||Dome Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Motion Sensor ZSE18||ZSE18||Motion Sensor||Z-Wave||Zooz Motion Sensor ZSE18|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Zooz S2 Multisiren||ZSE19||Siren||Z-Wave||Zooz S2 Multisiren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Outdoor Motion Sensor||ZSE29||Motion Sensor||Z-Wave||Generic Z-Wave Motion Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Water Sensor||ZSE30||Water Sensor||Z-Wave||Dome Leak Sensor|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Smart Chime||ZSE33||Doorbell||Z-Wave||Dome Siren|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|4-in-1 Sensor||ZSE40||Motion Sensor||Z-Wave||Zooz 4-in-1 Sensor|| ||Not compatible with Model C-7<br />
|-<br />
|<br />
===[[Join and Reset Instructions#Zooz|<sup>Zooz</sup>]]===<br />
|Water Valve||ZAC03<br />
|Valve||Z-Wave||Generic Z-Wave Valve|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZWP|<sup>ZWP</sup>]]===<br />
|Dimmer||WD-100||Dimmer||Z-Wave||Generic Z-Wave CentralScene Dimmer|| ||<br />
|-<br />
|<br />
===[[Join and Reset Instructions#ZWP|<sup>ZWP</sup>]]===<br />
|Switch||WS-100||Switch||Z-Wave||Generic Z-Wave CentralScene Switch|| ||<br />
|}<br />
<br />
<nowiki>*</nowiki>Note: Aeotec was formerly known as Aeon Labs.<br />
<br />
__NOEDITSECTION__<br />
__NOTOC__</div>Doughttps://docs.hubitat.com/index.php?title=Rule-5.0&diff=5174Rule-5.02021-07-14T19:01:08Z<p>Doug: /* Wait for Events and Wait for Condition */</p>
<hr />
<div>{{DISPLAYTITLE:Rule-5.0}}<br />
{{Top}}<h1><big>Rule Machine<sup>®</sup> 5.0</big></h1><big>Rule-5.0 is the culmination of a journey in the transformation of the Rule Machine app. All at once, it simplifies and adds power, resulting in a fully generalized automation engine. The prior top-level organization of Rule Machine has been replaced with an optimized interface. The changes described below, explain how prior rules were created versus how it is accomplished with Rule-5.0. The former structure of Rules, Triggers, Triggered Rules, Actions and Schedules are now replaced with the definition of what causes a rule to run, and the resulting action. The former Button Controller app is now incorporated into Rule Machine, but with increased power and flexibility. New conditional logic capabilities are provided, allowing the most subtle or complex automations to be created. You simply define what causes the a rule to run, and then that you want it to do.</big><br />
===<big>Logic in a Rule-5.0 rule</big>===<br />
<big>In any Rule, the rule itself can be thought of as an overarching '''IF-THEN-ELSE''', where if the condition was '''True''' for the '''IF''' part or the rule, then '''Actions for True''' are run, and if they are '''False''', then '''Actions for False''' are run. In '''Rule-5.0''', this same logic can now simply be done with the '''Conditional Actions''' of '''IF-THEN and ELSE''' in the '''Actions''' section of a rule. As described in the next section, '''IF-THEN''' now has the same full logical expression capability previously available, with the addition of '''AND, OR, XOR, NOT''' logical operators, and nested parenthetical sub-expressions.</big><br />
<br />
*<big>'''Example:''' Using a Trigger Event such as a contact sensor '''Front Door *changed*''' to illustrate the difference, the previous Rule Machine version used this to interpret the '''Condition of Front Door *open*.''' The rule was evaluated whenever '''any''' event happened for the Front Door. In Rule-5.0, this is explicit, whereas in previous versions the rule was '''Front Door *open*''', we now make that event the Condition of an '''IF-THEN''' action. What were formerly '''Actions for True''', now become the Actions following '''IF-THEN''', and the former '''Actions for False''' become the actions following '''ELSE'''. Most Rules will now follow this basic format.</big><br />
<br />
===<big>Rule Triggers</big>===<br />
<big>All "Rules" in Rule-5.0 are in effect '''Triggered Rules'''. They each have a '''Trigger Event''', and then '''Conditional Actions'''. Instead of a rule with '''Actions for True''' and '''Actions for False''', they simply use conditional logic in the actions to create an equivalent '''IF-THEN-ELSE''' structure.</big><br />
===<big>Events</big>===<br />
<big>Each rule can have one or more '''Trigger Events''' that when triggered, cause the rule's actions to run.</big><p><big>Events are created by the devices or conditions in your system. Each device creates events appropriate to the type of device. A '''Trigger Event''' listens for specific events and when a trigger receives a selected event, it causes the defined '''Actions''' to run.</big></p><p><big>Rule Machine allows the following events in a Hubitat Elevation system to be acted upon. Each event results in a single test and the supported events and states that can be tested are listed below. For each event that refers to a device, one or more devices can be selected, and then the device state required for the '''Condition''' to be met can be selected. When multiple devices are selected, the Condition/Event may apply for '''ANY''' (default) or '''ALL''' of the devices.</big></p><pre>Acceleration: active / inactive<br />
Between two dates: starting month on this date / ending month on this date<br />
Battery: value<br />
Button: pressed / held / doubleTapped / released<br />
Button Device: select actions for any buttons of a button device<br />
Certain Time: at a certain time, including sunrise / sunset with offset<br />
Cloud End Point: hitting URL fires<br />
Contact: open / closed<br />
Custom attribute: device capability<br />
Days of Week: on certain days of the week<br />
Dimmer level: value<br />
Door: open, closed, opening, closing, unknown<br />
Energy meter: value<br />
Garage door: open, closed, opening, closing, unknown<br />
HSM alert: intrusion, intrusion-delay, intrusion-home, intrusion-home-delay, intrusion-night, cancelRuleAlerts, intrusion-night-delay, <br />
smoke, water, rule, arming, armingHome, armingNight, cancel<br />
HSM status: armed away, armed home, armed night, delayed arming home, delayed arming night, delayed arming away, disarmed, all disarmed<br />
Humidity: value<br />
Illuminance: value<br />
Last Event Device select device and attribute<br />
Local End Point: hitting URL fires<br />
Lock: locked / unlocked<br />
Mode: any of your hub's modes<br />
Motion: active / inactive<br />
Music player: playing, paused, stopped<br />
Periodic: allows periodic schedules for minutes, hourly, daily, weekly, monthly or yearly<br />
Physical dimmer level: value <br />
Physical switch: on / off<br />
Power meter: value<br />
Power source: mains / battery<br />
Presence: present / not present or arrives / leaves<br />
Private Boolean: true / false<br />
Rule paused: rule<br />
Smoke detector: clear, detected, tested<br />
Switch: on / off<br />
Temperature: value<br />
Thermostat cool setpoint: value<br />
Thermostat fan mode: value<br />
Thermostat heat setpoint: value<br />
Thermostat mode: heat / cool / auto / off / emergency heat<br />
Thermostat state: heating / cooling / fan only / idle / pending heat / pending cool<br />
Time of day: specific time / sunrise / sunset<br />
Variable: value<br />
Water sensor: dry / wet<br />
<br />
Note: value means compare current value to a number, to another device with an offset, or to a variable with an offset, or changed, increased, decreased</pre><br />
===<big>Actions</big>===<br />
<big>Actions are the portion of a rule that defines what the rule does when it is triggered to run.</big><br />
====<big>Actions as ordered script</big>====<br />
<big>As you define actions, you are creating a script of actions to perform when the rule runs. You may use as many actions as you want for each '''Action''' type and they can be run in whatever order you want. There is no predefined order of execution for Rule Machine actions, so you may arrange the order of actions any way you want. You can insert a new action anywhere in the list of actions, or at the end of the list.</big><br />
====<big>Actions can be modified</big>====<br />
<big>The Rule-5.0 user interface provides the ability to '''Edit''' and '''Delete''' any action you have defined, giving you complete control over your list of actions.</big> <br />
[[File:Rule-5.0 Edit and Delete Actions.png|none|thumb|600x600px]]<br />
<big>You may also '''Cut''' and then '''Paste''' actions if you need them to occur in a different order.</big><br />
<br />
#Select the action to cut.<br />
#Choose the new position for the action you just cut. The desired position could also be the end of the action list by choosing to paste the action before '''**End of Actions**''', which would paste the cut action at the end of the action list.[[File:Rule-5 cut action.png|none|thumb|600x600px]][[File:Rule-5.0 Paste Action Before v2.png|none|thumb|600x600px]][[File:Rule-5 action position after paste action.png|none|thumb|600x600px]]<br />
<br />
====<big>Delay Actions and Delay Actions per Mode</big>====<br />
<big>All actions can be delayed, effectively pausing the action execution for a specified amount of time. A</big><big>ctions</big> <big>may</big> <big>also be delayed for a period of time that is dependent on the current '''Mode''' by using '''Delay Actions Per Mode'''.</big><br />
<br />
<big>'''Delay per Action'''</big><br />
<br />
<big>Each action you define can have an optional delay. These delays can be defined with hours, minutes, and seconds. Seconds can have decimal fractions, allowing millisecond resolution. In a rule, delays can have the '''option to be cancelled''' in the event of a change of rule truth. It is important to realize that the delay assigned to an individual action affects only that action, and not subsequent actions. Any subsequent action is executed immediately after the delayed action starts its delay timer, and does not wait for that delay timer to run. When the delay timer expires, the delayed action is executed (unless the delay was cancelled).</big><br />
[[File:Rule Machine Delay per action.png|none|thumb|600x600px]]<br />
<big>'''Delay all Actions'''</big><br />
<br />
<big>It is also possible to delay all actions (also with optional cancel). The script of actions runs sequentially when the rule runs, with each action happening in order. Actions with delays start their timer, which can vary for each action, and '''<u>the next action in order</u>''' runs. By using '''Delay Actions''', the entire script can be ''paused'' by a delay.</big><br />
<br />
<big>'''Delay Actions per Mode'''</big><br />
<br />
<big>Delay Actions can also be specified on a per mode basis, so that the time the script is paused, varies according to the current mode.</big><br />
===<big>Rule-5.0 Conditional Actions and Logical Expressions</big>===<br />
<big>In Rule Machine, '''IF-THEN-ELSE-ENDIF''' conditional blocks can be nested. The user interface utilizes textual indentation to help guide you in keeping track of which '''IF-THEN-ELSE-ENDIF''' block you are currently adding actions to. The user is responsible for completing each level of nested '''IF-THEN''' blocks.</big><br />
<br />
<big>The condition of an '''IF-THEN''' or '''ELSE-IF''' Action can be a full logical expression built-up from individual conditions, and the logical operators '''AND''', '''OR''', '''XOR''', and '''NOT'''. Parenthesized sub-expressions are also possible. This is the same user interface of the former rule portion found in Rule or Triggered Rule from Rule-3.0. An individual '''Condition''' can be created ''on the fly'' while defining a logical expression. Every such '''Condition''' is kept in the list of available Conditions. This list of available conditions is present in the '''Define Actions''' page. The user interface then allows Creating, Editing and Deleting conditions. If a condition is edited, those changes will be reflected where it is used in an '''IF-THEN''' or '''ELSE-IF''' conditional action.</big><br />
<br />
<big>This combination of nested '''IF-THEN''' blocks and full logical expression for each '''IF-THEN''' and '''ELSE-IF''', allows creativity for rules in Rule-5.0 that is limited only by your imagination. To help you with complex logic structures, new actions are available.</big><br />
<br />
#<big>Exit Rule - With Exit Rule the execution of '''Actions''' for that rule will stop, irrespective of what order in the rule it exists.</big><br />
#<big>Pending Delays are not cancelled, and current Repetitions are not stopped by Exit Rule, but these can be managed separately if needed with '''Stop Repeating Actions''', '''Cancel Rule Timers''', and '''Cancel Delayed Actions''', where appropriate.</big><br />
<br />
====<big>Automatic Condition Creation</big>====<br />
<big>When '''Event Triggers''' are defined, corresponding conditions are created for most types. Some conditions, like '''Button''', '''Certain Time''', etc, do not have a ''state'' and so have no corresponding condition. These created conditions are available in the '''Define Actions''' page for use in '''Conditional Actions''', are available for use in other Actions, and can be edited.</big><br />
<br />
====<big>IF-THEN-ELSE</big>====<br />
<big>You can introduce conditional execution of actions using the following method.</big><br />
IF (condition) THEN <br />
some actions...<br />
ELSE-IF (condition) THEN <br />
some actions...<br />
ELSE <br />
some actions...<br />
END-IF <br />
<big>'''IF-THEN''' and '''ELSE-IF''' both accept a logical expression as described above and '''IF-THEN-ELSE''' may also be nested. If the expression on the '''IF''' portion is True, then those actions following '''IF''' and before any '''ELSE-IF''' or '''ELSE''' statements will be carried out. If the expression is False, then those actions are skipped, and the '''ELSE''' portion or '''ELSE-IF''' are carried out. In the case of '''ELSE-IF''', its expression will be tested, and the following Actions that follow it will either run or will not run, depending on the result of the evaluation. There can be as many '''ELSE-IF''' sections as you need, and the '''ELSE-IF''' and '''ELSE''' portions are both are optional. '''END-IF''' is also optional, and if omitted means all remaining actions are part of the preceding '''IF-THEN''', '''ELSE-IF''' or '''ELSE'''. However, for good rule structure, just a sentence should have a period at the end, it is strongly recommended that you use END-IF to complete an '''IF-THEN-ELSE''' as a regular practice.</big><br />
===<big>Repeat Actions</big>===<br />
<big>Portions of, or all of the script of an '''Action''' can be repeated periodically, but you must specify the time interval for the repetition. Be careful not to make this interval too short, as you can consume your hub CPU resources by repeating too quickly. You can select any number of iterations if desired, but some method to stop the repetition is required. When a '''Repeat Actions''' is introduced to the script, any action before '''END-REP''' will be repeated. Only the Actions between '''Repeat Actions''' and '''END-REP''' will be repeated. Actions following '''END-REP''' will run only once the repetition has stopped. There is an optional '''Stop for a Repeat Action''' choice and if selected, then '''Stop Repeating Actions''' will stop this repetition. Using '''Cancel Rule Timers''' from either the current rule or another rule, will stop '''<u>all Repeat Actions</u>''', irrespective of which Stop selection is used.</big><br />
Repeat Actions<br />
some actions...<br />
END-REP<br />
<big>A '''Repeat Actions''', like any action, can have a condition specified. If the condition is False, the '''Repeat Actions''' block will not be executed. If the condition becomes False during repetition, the repetition will be stopped (with the exception of when '''Repeat N Times''' is selected). This provides three features well known to computer programmers.</big><br />
<br />
#<big>While-loop - The '''while-loop''' runs only if the condition is true, and stops if it is false.</big><br />
#<big>For-loop - A '''for-loop''' runs for a fixed number of times, but if a condition exists, it will only start that iteration if the condition is true; The condition is not retested during iteration.</big><br />
#<big>Repeat-until loop - A repeat-until loop runs until a condition becomes true, running at least once.</big><br />
<br />
'''<big>Examples:</big>'''<br />
<br />
''<big>While loop - repeat while the condition is True:</big>''<br />
IF (condition) Repeat Actions<br />
some actions...<br />
END-REP<br />
''<big>For loop (repeat n times):</big>''<br />
Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Conditional For loop (repeat n times if condition is True):</big>''<br />
IF (condition) Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Repeat-Until loop:</big>''<br />
Repeat Actions with Stop selected<br />
some actions<br />
IF (condition) Stop Repeating Actions<br />
END-REP<br />
<big>'''Repeat Actions''' cannot be nested. '''END-REP''' is optional, and if omitted, all actions after '''Repeat Actions''' will be repeated.</big><br />
<br />
*<big>'''Note''': The '''END-REP''' does not have anything to do with the when a '''Repeated Action''' will stop repeating, it merely marks the end of the list of actions to be repeated. If you use '''Repeat These Actions''' without specifying '''N Times''' (for loop), and without a '''Condition''' (while loop), and also without a '''Conditional Stop''' or a '''Stop on Truth Change''' (for rules only), that means it should repeat <u>forever</u>, and that is probably not what you want to have happen. In that case, some other rule would need to cause the repetition to stop.</big><br />
<br />
===<big>Wait for Events and Wait for Conditions</big>===<br />
<big>'''Wait for Events''' and '''Wait for Conditions''' may be using with Conditional Actions and in a '''Simple Conditional Action'''. Additionally, '''Wait for Conditions''' allows for full logical expression with operators '''AND''', '''OR''', or '''XOR.''' If the conditions are true, no wait occurs, otherwise the rule execution is paused until the conditions are met.</big> <big>Both '''Wait for Events''' and '''Wait for Conditions''' have the option to select a '''Timeout''' period. Multiple events can be defined to cause the Wait to end. In effect, this introduces another trigger-like capability into the Actions. There is also an event type specifically for '''Wait for Events''' named '''Elapsed Time'''. When the '''Elapsed Time''' expires, the wait will be over, irrespective of other events it may be waiting for. Pending '''Wait for Events''' and '''Wait for Conditions''' will be cancelled each time a rule is triggered, and can be also cancelled by another rule with '''Stop Rule Actions''', or by a '''Cancel Wait''' action (which presumably would have been part of a Delayed Action).</big> <br />
<br />
<big>'''Wait for Conditions''' also has an option to use '''Duration''' instead of a '''Timeout''' period, allowing you to specify an amount of time that the Conditions must remain continuously true for the Wait to conclude. This is useful for many automations that require the passage of some time in a certain state, such as a door that has been left open for more than 5 minutes. The rule would '''Wait for Conditions''' that the door is open for a duration of 5 minutes, Following the Wait period, you could have a notification action. If the door was subsequently closed before the 5 minute duration period, the Wait wouldn't conclude. If the door opened again, the pending Wait would then be canceled, and a new one begins. Only if the door is opened and remains open for 5 minutes would the Wait conclude, and the notification be sent.</big><br />
[[File:Wait for conditions example.png|none|thumb|600x600px]]<br />
<br />
* <big>'''NOTE:''' In cases where a rule’s trigger event is closely related to the Conditions, such as in the above example of a door remaining open, two subscriptions will fire. One subscription will be for the '''Trigger''', and one for the pending Wait. The trigger will win, thus canceling the pending wait, but if logging is enabled you will find both outcomes of the event in the logs. It is important to <u>never use</u> a *changed* trigger with '''Wait for Conditions''' on a related event, since it would result in a re-trigger after every event related to the Conditions, and the Wait would never conclude because would be cancelled by the *changed* trigger.</big><br />
<br />
===<big>Custom Actions</big>===<br />
<big>A Custom Action allows you to select a device, and send any of the commands that device supports along with parameters it may take. '''Custom Actions''' are created within your actions and they are specific to the rule where created.</big><br />
===<big>Run Actions from the Rule-5.0 User Interface</big>===<br />
<big>When you first create a new rule, you are creating a child app of the parent Rule Machine app, and therefor you must select '''Done''' on the main page to install the Rule-5.0 rule. If you re-open the rule, its actions can be run by hitting '''Run Actions''' button. If you change the '''Trigger Events''' in any way, you must either select '''Done''' or the '''Update Rule''' button.</big><br />
<br />
===<big>Rule Logging</big>===<br />
<big>You can select which types of logging you want to see in [https://docs.hubitat.com/index.php?title=Logs Logs]. This is a very good way to determine exactly what a rule is doing.</big><br />
===<big>List of Actions</big>===<br />
<pre> Conditional Actions <br />
IF (conditions) THEN<br />
ELSE-IF (conditions) THEN<br />
ELSE<br />
END-IF<br />
Simple Conditional Action<br />
Control Switches, Push Buttons <br />
Turn switches on<br />
Turn switches off<br />
Toggle switches<br />
Flash switches<br />
Set switches per mode<br />
Push a button<br />
Push a button per mode<br />
Set Dimmers and Bulbs <br />
Set dimmer level<br />
Toggle dimmer level<br />
Adjust dimmer level<br />
Set dimmer level per mode<br />
Fade dimmer level over time<br />
Stop dimmer fade<br />
Start raising dimmer level<br />
Start lowering dimmer level<br />
Stop changing dimmer level<br />
Set color and level<br />
Toggle color and level<br />
Set color and level per mode<br />
Set color temperature and level<br />
Toggle color temperature and level<br />
Set color temperature and level per mode<br />
Change color temperature over time<br />
Stop changing color temperature<br />
Activate Scenes, Adjust Shades or Fans <br />
Activate scenes<br />
Activate scenes per mode<br />
Open shades<br />
Close shades<br />
Set shade position<br />
Set fan speed<br />
Cycle fans<br />
Control HSM, Garage Doors, Locks or Valves <br />
Arm/Disarm Hubitat® Safety Monitor<br />
Open garage door<br />
Close garage door<br />
Lock locks<br />
Unlock locks<br />
Open valves<br />
Close valves<br />
Control Thermostats or Thermostat Scheduler <br />
Set thermostats<br />
Set Thermostat Scheduler<br />
Send, Speak, or Log a Message, Send HTTP Request <br />
Send or Speak a Message<br />
Log a Message<br />
Send HTTP Get<br />
Send HTTP Post<br />
Control Music Player, Volume, Sounds<br />
Control Music Player<br />
Set Volume<br />
Mute<br />
Unmute<br />
Sound Tone<br />
Sound Chime<br />
Control Siren<br />
Set Mode or Variables, Run Custom Action <br />
Set Mode<br />
Run Custom Action<br />
Write to local file<br />
Append to local file<br />
Delete local file<br />
Set Private Boolean, Run/Cancel/Pause Rules <br />
Set Private Booleans True<br />
Set Private Booleans False<br />
Run Rule Actions<br />
Cancel Rule Timers<br />
Pause Rules<br />
Resume Rules<br />
Capture/Restore, Device Refresh or Polling <br />
Capture Devices<br />
Restore Devices<br />
Refresh devices<br />
Poll devices<br />
Start Z-Wave poll on switches<br />
Stop Z-Wave poll on switches<br />
Start Z-Wave poll on dimmers<br />
Stop Z-Wave poll on dimmers<br />
Delay or Repeat Actions, Wait <br />
Delay Actions<br />
Delay Actions Per Mode<br />
Cancel Delayed Actions<br />
Repeat Actions<br />
END-REP<br />
Stop Repeating Actions<br />
Wait for Events<br />
Wait for Condition<br />
Cancel Wait<br />
Exit Rule<br />
Comment</pre><br />
<br />
===<big>Export, Import or Clone of Rule Machine Rules</big>===<br />
<big>Select this option to allow export of your Rule Machine rules for import to another hub, or to clone an existing rule as a base from which to start a new rule.</big><br />
[[File:Export Import and Clone RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/99/Export_Import_and_Clone_RM_rule_v2.png<br />
]]<br />
<br />
====<big>Export a Rule</big>====<br />
<br />
#<big>Select a single or multiple rules for '''Export'''. You may export multiple rules to a single file, and still have the option to select which rules to later '''Import'''.</big>[[File:Export Selected RM rules v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/00/Export_Selected_RM_rules_v2.png ]]<br />
#<big>Press the '''Download''' button to save the file to your local drive in the designated file download location for your browser. Typically this will be your '''Downloads''' folder.</big>[[File:Export RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/52/Export_RM_rule_v2.png ]]<br />
<br />
====<big>Restore or Import a Rule</big>====<br />
<big>You may choose to '''Restore''' a rule instead of using the '''Import''' option. This is most appropriate for instances where you want to bring a Rule Machine rule into your hub database, but you do not want to change the name or the devices used in the rule. If you instead choose to '''Import''', the process will pause to allow the rule to be renamed, and the devices used in the rule to be substituted with other devices installed on your hub before completing the import process.</big><br />
<br />
'''<big>Restore</big>'''<br />
<br />
#<big>To '''Restore''', select the saved file you previously exported, then press the '''Restore''' button.</big>[[File:Restore RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/6b/Restore_RM_rule.png ]]<br />
<br />
'''<big>Import</big>'''<br />
<br />
#<big>To '''Import''', select the saved file you previously exported and press the '''Import...''' button.</big>[[File:Import RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/c/c9/Import_RM_rule.png ]]<br />
#<big>Select the rules for import.</big>[[File:Selected RM rule for import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/16/Selected_RM_rule_for_import.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big><br />
#*<big>'''NOTE:''' If you '''Import''' a rule to another hub without selecting replacement devices, any existing devices with those same names will be used in the imported rule. If the devices do not exist, virtual devices with those same names will automatically be created. This is very helpful when you need to replace devices of an imported rule, but do not yet have the devices available that will replace them.</big>[[File:Rename and change RM devices before import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/da/Rename_and_change_RM_devices_before_import.png ]]<br />
#<big>When ready to import, press the '''Import ['''rule name''']''' button.</big>[[File:Rule Machine Import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/1a/Rule_Machine_Import.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been imported.</big>[[File:RM Import confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/9c/RM_Import_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps.</big>[[File:Show imported Rule-5 rules.png|none|thumb|600x600px]]<br />
#*<big>'''<span style="color: red;;">IMPORTANT!</span>''' - If you import rules that contain a Private Boolean, it must be manually adjusted after importing the rule. In the following example, you will see that an imported rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]][[File:Imported rule with PB not pointing anywhere.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d4/Imported_rule_with_PB_not_pointing_anywhere.png ]]<br />
<br />
====<big>Clone a Rule</big>====<br />
<br />
#<big>To '''Clone''' a rule, select the rule from the list of available Rule Machine rules on your hub and press the '''Clone''' button.</big>[[File:Select Rule Machine rule for clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/2d/Select_Rule_Machine_rule_for_clone.png ]][[File:Initiate Rule Machine cloning.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/68/Initiate_Rule_Machine_cloning.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big>[[File:Rename and change RM devices before clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/dd/Rename_and_change_RM_devices_before_clone.png ]]<br />
#<big>When ready to proceed, press the '''Clone ['''rule name''']''' button.</big>[[File:Clone Rule Machine rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/55/Clone_Rule_Machine_rule.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been cloned.</big>[[File:RM rule clone confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/46/RM_rule_clone_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps. If you did not change the name, the rule will be imported under the same name, but it will have the word '''clone''' added to the end.</big>[[File:Show cloned Rule-5 rule.png|none|thumb|600x600px]]<br />
#*<big><span style="color: red;;">'''IMPORTANT!'''</span> If you '''Clone''' rules that contain a Private Boolean, it must be manually corrected after cloning the rule. In the following example, you will see that a cloned rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]] [[File:Cloned rule with incorrect PB setting.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/48/Cloned_rule_with_incorrect_PB_setting.png ]]</div>Doughttps://docs.hubitat.com/index.php?title=File:Wait_for_conditions_example.png&diff=5173File:Wait for conditions example.png2021-07-14T18:48:16Z<p>Doug: </p>
<hr />
<div>Wait for conditions example</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Elevation_Documentation&diff=5172Hubitat Elevation Documentation2021-07-13T23:29:20Z<p>Doug: </p>
<hr />
<div><br />
==[[Getting Started|<big>Getting Started</big>]]==<br />
<br />
#[[Registration and setup|<u>'''<big>Registration and setup</big>'''</u>]]<br />
#[[Navigating the hub interface|<big>Navigating the hub interface</big>]]<br />
#[[Discovering your Devices|<big>Discovering your Devices</big>]]<br />
#[[Automating your Devices|<big>Automating your Devices</big>]]<br />
#[[Care and Maintenance|<big>Care and Maintenance</big>]]<br />
#[[How to Collect Information for Support|<big>Support</big>]]<br />
<br />
==<big>Subscription Services</big>==<br />
<br />
*[[Hub Protect|<big>Hub Protect</big>]]<br />
*[[Remote Admin|<big>Remote Admin</big>]]<br />
<br />
==<big>Hubitat Elevation User Interface</big>==<br />
<br />
'''<big>Main Menu</big>'''<br />
<br />
*'''<big>[[Home]]</big>'''<br />
*[[Location and Modes|'''<big>Location and Modes</big>''']]<br />
*'''<big>[[Devices]]</big>'''<br />
**[[Device Discovery|<big>Device Discovery</big>]]<br />
**[[Device Detail|<big>Device Detail</big>]]<br />
**[[Device Events|<big>Device Events</big>]]<br />
*'''<big>[[Apps]]</big>''' <br />
**[[App Status|<big>App Status</big>]]<br />
**[[App Events|<big>App Events</big>]]<br />
*'''<big>[[Settings]]</big>'''<br />
**[[Hub Details|<big>Hub Details</big>]]<br />
**[[Hub Login Security|<big>Hub Login Security</big>]]<br />
**[[Location and Modes|<big>Location and Modes</big>]]<br />
**[[Z-Wave Details|<big>Z-Wave Details</big>]]<br />
**[[Zigbee Details|<big>Zigbee Details</big>]]<br />
***[[Zigbee Logs|<big>Zigbee Logs</big>]]<br />
**[[Check For Updates|<big>Check For Updates</big>]]<br />
**[[File Manager|<big>File Manager</big>]]<br />
**[[Backup and Restore|<big>Backup and Restore</big>]]<br />
**[[Discover Zigbee and Z-Wave Devices|<big>Discover Zigbee and Z-Wave Devices</big>]]<br />
**[[Hub Mesh|<big>Hub Mesh</big>]]<br />
**<big>[[Networking]]</big><br />
<br />
'''<big>Advanced Features</big>'''<br />
<br />
*[[Apps Code|<big>Apps Code</big>]]<br />
*[[Drivers Code|<big>Drivers Code</big>]]<br />
*[[System Events|<big>System Events</big>]]<br />
**[[Hub Events|<big>Hub Events</big>]]<br />
**[[Location Events|<big>Location Events</big>]]<br />
*<big>[[Logs]]</big><br />
**[[Past Logs|<big>Past Logs</big>]]<br />
*[[Hubitat Diagnostic Tool|<big>Hubitat Diagnostic Tool</big>]]<br />
*[[Soft Reset|<big>Soft Reset</big>]]<br />
<br />
==<big>App Documentation</big>==<br />
<br />
*[[Amazon Echo App|<big>Amazon Echo App</big>]]<br />
*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*<big>[[Basic Rules]]</big><br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-5.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Zone Motion Controllers|<big>Zone Motion Controllers</big>]]<br />
*[[Z-Wave Poller|<big>Z-Wave Poller</big>]]<br />
<br />
==<big>Device Documentation</big>==<br />
<br />
*[[Orbit Hose Water Timer|<big>Orbit Hose Water Timer</big>]]<br />
<br />
*<big>[[Pushover]]</big><br />
<br />
*<big>[[SecurityKeypads]]</big><br />
<br />
*[[Twilio Notification|<big>Twilio Notification</big>]]<br />
<br />
==<big>Compatible Devices</big>==<br />
<br />
[[List of Compatible Devices|'''<big>List of Compatible Devices</big>''']]<br />
<br />
[[Join and Reset Instructions|<big>Join and Reset Instructions</big>]]<br />
<br />
==<big>How-to Guides</big>==<br />
<br />
[[Hub Placement Tips|<big>Hub Placement Tips</big>]]<br />
<br />
[[How to collect information for support|<big>How to collect information for support</big>]]<br />
<br />
[[How to cancel subscription services|<big>How to cancel subscription services</big>]]<br />
<br />
[[How to Build a Solid Zigbee Mesh|<big>How to Build a Solid Zigbee Mesh</big>]]<br />
<br />
[[How to Build a Solid Z-Wave Mesh|<big>How to Build a Solid Z-Wave™ Mesh</big>]]<br />
<br />
[[How to remove a Z-Wave device|<big>How to remove a Z-Wave™ device</big>]]<br />
<br />
[[The Anatomy of Z-Wave™ Repair|<big>The Anatomy of Z-Wave™ Repair</big>]]<br />
<br />
[[How to update your hub|<big>How to update your hub</big>]]<br />
<br />
[[How to backup your hub|<big>How to backup your hub</big>]]<br />
<br />
[[How to change your location|<big>How to change your location</big>]]<br />
<br />
[[How to add/change a mode|<big>How to add/change a mode</big>]]<br />
<br />
[[How to Install Custom Apps|<big>How to Install Custom Apps</big>]]<br />
<br />
[[How to Install Custom Drivers|<big>How to Install Custom Drivers</big>]]<br />
<br />
[[Hub Login Security|<big>How to add password protection</big>]]<br />
<br />
[[How to Manage Lock Codes|<big>How to Manage Lock Codes</big>]]<br />
<br />
<big>[[How to create new presence and push notification devices]]</big><br />
<br />
<big>[[How to setup mobile presence sensing]]</big><br />
<br />
[[How to manage accounts linked to your hub|<big>How to manage accounts linked to your hub</big>]]<br />
<br />
[[How to correct a Multi Admin error|<big>How to correct a Multi Admin error</big>]]<br />
<br />
[[How to disable Hub Login Security to recover access|<big>How to disable Hub Login Security to recover access</big>]]<br />
<br />
[[How to use Dashboard to Manage Lock Codes|<big>How to use Dashboard to Manage Lock Codes</big>]]<br />
<br />
==<big>Compliance Documentation</big>==<br />
<br />
[[Z-Wave Manual|'''<big>Z-Wave User Manual</big>''']]<br />
<br />
==<big>Developer Documentation</big>==<br />
<br />
[[Developer Documentation|<big>Developer Documentation</big>]]<br />
<br />
[[Driver Capability List|<big>Driver Capability List</big>]]<br />
<br />
==<big>Platform</big>==<br />
[[Release Notes|'''<big>Release Notes</big>''']]<br />
<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=Rule-5.0&diff=5171Rule-5.02021-07-13T23:26:54Z<p>Doug: </p>
<hr />
<div>{{DISPLAYTITLE:Rule-5.0}}<br />
{{Top}}<h1><big>Rule Machine<sup>®</sup> 5.0</big></h1><big>Rule-5.0 is the culmination of a journey in the transformation of the Rule Machine app. All at once, it simplifies and adds power, resulting in a fully generalized automation engine. The prior top-level organization of Rule Machine has been replaced with an optimized interface. The changes described below, explain how prior rules were created versus how it is accomplished with Rule-5.0. The former structure of Rules, Triggers, Triggered Rules, Actions and Schedules are now replaced with the definition of what causes a rule to run, and the resulting action. The former Button Controller app is now incorporated into Rule Machine, but with increased power and flexibility. New conditional logic capabilities are provided, allowing the most subtle or complex automations to be created. You simply define what causes the a rule to run, and then that you want it to do.</big><br />
===<big>Logic in a Rule-5.0 rule</big>===<br />
<big>In any Rule, the rule itself can be thought of as an overarching '''IF-THEN-ELSE''', where if the condition was '''True''' for the '''IF''' part or the rule, then '''Actions for True''' are run, and if they are '''False''', then '''Actions for False''' are run. In '''Rule-5.0''', this same logic can now simply be done with the '''Conditional Actions''' of '''IF-THEN and ELSE''' in the '''Actions''' section of a rule. As described in the next section, '''IF-THEN''' now has the same full logical expression capability previously available, with the addition of '''AND, OR, XOR, NOT''' logical operators, and nested parenthetical sub-expressions.</big><br />
<br />
*<big>'''Example:''' Using a Trigger Event such as a contact sensor '''Front Door *changed*''' to illustrate the difference, the previous Rule Machine version used this to interpret the '''Condition of Front Door *open*.''' The rule was evaluated whenever '''any''' event happened for the Front Door. In Rule-5.0, this is explicit, whereas in previous versions the rule was '''Front Door *open*''', we now make that event the Condition of an '''IF-THEN''' action. What were formerly '''Actions for True''', now become the Actions following '''IF-THEN''', and the former '''Actions for False''' become the actions following '''ELSE'''. Most Rules will now follow this basic format.</big><br />
<br />
===<big>Rule Triggers</big>===<br />
<big>All "Rules" in Rule-5.0 are in effect '''Triggered Rules'''. They each have a '''Trigger Event''', and then '''Conditional Actions'''. Instead of a rule with '''Actions for True''' and '''Actions for False''', they simply use conditional logic in the actions to create an equivalent '''IF-THEN-ELSE''' structure.</big><br />
===<big>Events</big>===<br />
<big>Each rule can have one or more '''Trigger Events''' that when triggered, cause the rule's actions to run.</big><p><big>Events are created by the devices or conditions in your system. Each device creates events appropriate to the type of device. A '''Trigger Event''' listens for specific events and when a trigger receives a selected event, it causes the defined '''Actions''' to run.</big></p><p><big>Rule Machine allows the following events in a Hubitat Elevation system to be acted upon. Each event results in a single test and the supported events and states that can be tested are listed below. For each event that refers to a device, one or more devices can be selected, and then the device state required for the '''Condition''' to be met can be selected. When multiple devices are selected, the Condition/Event may apply for '''ANY''' (default) or '''ALL''' of the devices.</big></p><pre>Acceleration: active / inactive<br />
Between two dates: starting month on this date / ending month on this date<br />
Battery: value<br />
Button: pressed / held / doubleTapped / released<br />
Button Device: select actions for any buttons of a button device<br />
Certain Time: at a certain time, including sunrise / sunset with offset<br />
Cloud End Point: hitting URL fires<br />
Contact: open / closed<br />
Custom attribute: device capability<br />
Days of Week: on certain days of the week<br />
Dimmer level: value<br />
Door: open, closed, opening, closing, unknown<br />
Energy meter: value<br />
Garage door: open, closed, opening, closing, unknown<br />
HSM alert: intrusion, intrusion-delay, intrusion-home, intrusion-home-delay, intrusion-night, cancelRuleAlerts, intrusion-night-delay, <br />
smoke, water, rule, arming, armingHome, armingNight, cancel<br />
HSM status: armed away, armed home, armed night, delayed arming home, delayed arming night, delayed arming away, disarmed, all disarmed<br />
Humidity: value<br />
Illuminance: value<br />
Last Event Device select device and attribute<br />
Local End Point: hitting URL fires<br />
Lock: locked / unlocked<br />
Mode: any of your hub's modes<br />
Motion: active / inactive<br />
Music player: playing, paused, stopped<br />
Periodic: allows periodic schedules for minutes, hourly, daily, weekly, monthly or yearly<br />
Physical dimmer level: value <br />
Physical switch: on / off<br />
Power meter: value<br />
Power source: mains / battery<br />
Presence: present / not present or arrives / leaves<br />
Private Boolean: true / false<br />
Rule paused: rule<br />
Smoke detector: clear, detected, tested<br />
Switch: on / off<br />
Temperature: value<br />
Thermostat cool setpoint: value<br />
Thermostat fan mode: value<br />
Thermostat heat setpoint: value<br />
Thermostat mode: heat / cool / auto / off / emergency heat<br />
Thermostat state: heating / cooling / fan only / idle / pending heat / pending cool<br />
Time of day: specific time / sunrise / sunset<br />
Variable: value<br />
Water sensor: dry / wet<br />
<br />
Note: value means compare current value to a number, to another device with an offset, or to a variable with an offset, or changed, increased, decreased</pre><br />
===<big>Actions</big>===<br />
<big>Actions are the portion of a rule that defines what the rule does when it is triggered to run.</big><br />
====<big>Actions as ordered script</big>====<br />
<big>As you define actions, you are creating a script of actions to perform when the rule runs. You may use as many actions as you want for each '''Action''' type and they can be run in whatever order you want. There is no predefined order of execution for Rule Machine actions, so you may arrange the order of actions any way you want. You can insert a new action anywhere in the list of actions, or at the end of the list.</big><br />
====<big>Actions can be modified</big>====<br />
<big>The Rule-5.0 user interface provides the ability to '''Edit''' and '''Delete''' any action you have defined, giving you complete control over your list of actions.</big> <br />
[[File:Rule-5.0 Edit and Delete Actions.png|none|thumb|600x600px]]<br />
<big>You may also '''Cut''' and then '''Paste''' actions if you need them to occur in a different order.</big><br />
<br />
#Select the action to cut.<br />
#Choose the new position for the action you just cut. The desired position could also be the end of the action list by choosing to paste the action before '''**End of Actions**''', which would paste the cut action at the end of the action list.[[File:Rule-5 cut action.png|none|thumb|600x600px]][[File:Rule-5.0 Paste Action Before v2.png|none|thumb|600x600px]][[File:Rule-5 action position after paste action.png|none|thumb|600x600px]]<br />
<br />
====<big>Delay Actions and Delay Actions per Mode</big>====<br />
<big>All actions can be delayed, effectively pausing the action execution for a specified amount of time. A</big><big>ctions</big> <big>may</big> <big>also be delayed for a period of time that is dependent on the current '''Mode''' by using '''Delay Actions Per Mode'''.</big><br />
<br />
<big>'''Delay per Action'''</big><br />
<br />
<big>Each action you define can have an optional delay. These delays can be defined with hours, minutes, and seconds. Seconds can have decimal fractions, allowing millisecond resolution. In a rule, delays can have the '''option to be cancelled''' in the event of a change of rule truth. It is important to realize that the delay assigned to an individual action affects only that action, and not subsequent actions. Any subsequent action is executed immediately after the delayed action starts its delay timer, and does not wait for that delay timer to run. When the delay timer expires, the delayed action is executed (unless the delay was cancelled).</big><br />
[[File:Rule Machine Delay per action.png|none|thumb|600x600px]]<br />
<big>'''Delay all Actions'''</big><br />
<br />
<big>It is also possible to delay all actions (also with optional cancel). The script of actions runs sequentially when the rule runs, with each action happening in order. Actions with delays start their timer, which can vary for each action, and '''<u>the next action in order</u>''' runs. By using '''Delay Actions''', the entire script can be ''paused'' by a delay.</big><br />
<br />
<big>'''Delay Actions per Mode'''</big><br />
<br />
<big>Delay Actions can also be specified on a per mode basis, so that the time the script is paused, varies according to the current mode.</big><br />
===<big>Rule-5.0 Conditional Actions and Logical Expressions</big>===<br />
<big>In Rule Machine, '''IF-THEN-ELSE-ENDIF''' conditional blocks can be nested. The user interface utilizes textual indentation to help guide you in keeping track of which '''IF-THEN-ELSE-ENDIF''' block you are currently adding actions to. The user is responsible for completing each level of nested '''IF-THEN''' blocks.</big><br />
<br />
<big>The condition of an '''IF-THEN''' or '''ELSE-IF''' Action can be a full logical expression built-up from individual conditions, and the logical operators '''AND''', '''OR''', '''XOR''', and '''NOT'''. Parenthesized sub-expressions are also possible. This is the same user interface of the former rule portion found in Rule or Triggered Rule from Rule-3.0. An individual '''Condition''' can be created ''on the fly'' while defining a logical expression. Every such '''Condition''' is kept in the list of available Conditions. This list of available conditions is present in the '''Define Actions''' page. The user interface then allows Creating, Editing and Deleting conditions. If a condition is edited, those changes will be reflected where it is used in an '''IF-THEN''' or '''ELSE-IF''' conditional action.</big><br />
<br />
<big>This combination of nested '''IF-THEN''' blocks and full logical expression for each '''IF-THEN''' and '''ELSE-IF''', allows creativity for rules in Rule-5.0 that is limited only by your imagination. To help you with complex logic structures, new actions are available.</big><br />
<br />
#<big>Exit Rule - With Exit Rule the execution of '''Actions''' for that rule will stop, irrespective of what order in the rule it exists.</big><br />
#<big>Pending Delays are not cancelled, and current Repetitions are not stopped by Exit Rule, but these can be managed separately if needed with '''Stop Repeating Actions''', '''Cancel Rule Timers''', and '''Cancel Delayed Actions''', where appropriate.</big><br />
<br />
====<big>Automatic Condition Creation</big>====<br />
<big>When '''Event Triggers''' are defined, corresponding conditions are created for most types. Some conditions, like '''Button''', '''Certain Time''', etc, do not have a ''state'' and so have no corresponding condition. These created conditions are available in the '''Define Actions''' page for use in '''Conditional Actions''', are available for use in other Actions, and can be edited.</big><br />
<br />
====<big>IF-THEN-ELSE</big>====<br />
<big>You can introduce conditional execution of actions using the following method.</big><br />
IF (condition) THEN <br />
some actions...<br />
ELSE-IF (condition) THEN <br />
some actions...<br />
ELSE <br />
some actions...<br />
END-IF <br />
<big>'''IF-THEN''' and '''ELSE-IF''' both accept a logical expression as described above and '''IF-THEN-ELSE''' may also be nested. If the expression on the '''IF''' portion is True, then those actions following '''IF''' and before any '''ELSE-IF''' or '''ELSE''' statements will be carried out. If the expression is False, then those actions are skipped, and the '''ELSE''' portion or '''ELSE-IF''' are carried out. In the case of '''ELSE-IF''', its expression will be tested, and the following Actions that follow it will either run or will not run, depending on the result of the evaluation. There can be as many '''ELSE-IF''' sections as you need, and the '''ELSE-IF''' and '''ELSE''' portions are both are optional. '''END-IF''' is also optional, and if omitted means all remaining actions are part of the preceding '''IF-THEN''', '''ELSE-IF''' or '''ELSE'''. However, for good rule structure, just a sentence should have a period at the end, it is strongly recommended that you use END-IF to complete an '''IF-THEN-ELSE''' as a regular practice.</big><br />
===<big>Repeat Actions</big>===<br />
<big>Portions of, or all of the script of an '''Action''' can be repeated periodically, but you must specify the time interval for the repetition. Be careful not to make this interval too short, as you can consume your hub CPU resources by repeating too quickly. You can select any number of iterations if desired, but some method to stop the repetition is required. When a '''Repeat Actions''' is introduced to the script, any action before '''END-REP''' will be repeated. Only the Actions between '''Repeat Actions''' and '''END-REP''' will be repeated. Actions following '''END-REP''' will run only once the repetition has stopped. There is an optional '''Stop for a Repeat Action''' choice and if selected, then '''Stop Repeating Actions''' will stop this repetition. Using '''Cancel Rule Timers''' from either the current rule or another rule, will stop '''<u>all Repeat Actions</u>''', irrespective of which Stop selection is used.</big><br />
Repeat Actions<br />
some actions...<br />
END-REP<br />
<big>A '''Repeat Actions''', like any action, can have a condition specified. If the condition is False, the '''Repeat Actions''' block will not be executed. If the condition becomes False during repetition, the repetition will be stopped (with the exception of when '''Repeat N Times''' is selected). This provides three features well known to computer programmers.</big><br />
<br />
#<big>While-loop - The '''while-loop''' runs only if the condition is true, and stops if it is false.</big><br />
#<big>For-loop - A '''for-loop''' runs for a fixed number of times, but if a condition exists, it will only start that iteration if the condition is true; The condition is not retested during iteration.</big><br />
#<big>Repeat-until loop - A repeat-until loop runs until a condition becomes true, running at least once.</big><br />
<br />
'''<big>Examples:</big>'''<br />
<br />
''<big>While loop - repeat while the condition is True:</big>''<br />
IF (condition) Repeat Actions<br />
some actions...<br />
END-REP<br />
''<big>For loop (repeat n times):</big>''<br />
Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Conditional For loop (repeat n times if condition is True):</big>''<br />
IF (condition) Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Repeat-Until loop:</big>''<br />
Repeat Actions with Stop selected<br />
some actions<br />
IF (condition) Stop Repeating Actions<br />
END-REP<br />
<big>'''Repeat Actions''' cannot be nested. '''END-REP''' is optional, and if omitted, all actions after '''Repeat Actions''' will be repeated.</big><br />
<br />
*<big>'''Note''': The '''END-REP''' does not have anything to do with the when a '''Repeated Action''' will stop repeating, it merely marks the end of the list of actions to be repeated. If you use '''Repeat These Actions''' without specifying '''N Times''' (for loop), and without a '''Condition''' (while loop), and also without a '''Conditional Stop''' or a '''Stop on Truth Change''' (for rules only), that means it should repeat <u>forever</u>, and that is probably not what you want to have happen. In that case, some other rule would need to cause the repetition to stop.</big><br />
<br />
===<big>Wait for Events and Wait for Condition</big>===<br />
<big>'''Wait for Events''' pauses rule execution until some specified event occurs. Multiple events can be defined to cause the wait to end. In effect, this introduces another trigger-like capability into the Actions. There is also an event type specifically for '''Wait for Events''' named '''Elapsed Time'''. When the '''Elapsed Time''' expires, the wait will be over, irrespective of other events it may be waiting for.</big><br />
<br />
<big>'''Wait for Condition''' is similar to '''Wait for Events''', but instead a '''Condition''' is evaluated. If the condition is true, no wait occurs, otherwise the rule execution is paused until the condition is met. '''Wait for Events''' and '''Wait for Condition''' may both be used in a '''Simple Conditional Action'''. Additionally, both pending '''Wait for Events''' and '''Wait for Condition''' will be cancelled each time a rule is triggered, and can be also cancelled by another rule with '''Stop Rule Actions''', or by a '''Cancel Wait''' action (which presumably would have been part of a Delayed Action).</big><br />
===<big>Custom Actions</big>===<br />
<big>A Custom Action allows you to select a device, and send any of the commands that device supports along with parameters it may take. While the former Custom Commands need to be pre-defined and were available to all rules, a '''Custom Action''' is created within your actions and is specific to the rule where it is created.</big><br />
===<big>Run Actions from the Rule-5.0 User Interface</big>===<br />
<big>When you first create a new rule, you are creating a child app of the parent Rule Machine app, and therefor you must select '''Done''' on the main page to install the Rule-5.0 rule. If you re-open the rule, its actions can be run by hitting '''Run Actions''' button. If you change the '''Trigger Events''' in any way, you must either select '''Done''' or the '''Update Rule''' button.</big><br />
<br />
===<big>Rule Logging</big>===<br />
<big>You can select which types of logging you want to see in [https://docs.hubitat.com/index.php?title=Logs Logs]. This is a very good way to determine exactly what a rule is doing.</big><br />
===<big>List of Actions</big>===<br />
<pre> Conditional Actions <br />
IF (conditions) THEN<br />
ELSE-IF (conditions) THEN<br />
ELSE<br />
END-IF<br />
Simple Conditional Action<br />
Control Switches, Push Buttons <br />
Turn switches on<br />
Turn switches off<br />
Toggle switches<br />
Flash switches<br />
Set switches per mode<br />
Push a button<br />
Push a button per mode<br />
Set Dimmers and Bulbs <br />
Set dimmer level<br />
Toggle dimmer level<br />
Adjust dimmer level<br />
Set dimmer level per mode<br />
Fade dimmer level over time<br />
Stop dimmer fade<br />
Start raising dimmer level<br />
Start lowering dimmer level<br />
Stop changing dimmer level<br />
Set color and level<br />
Toggle color and level<br />
Set color and level per mode<br />
Set color temperature and level<br />
Toggle color temperature and level<br />
Set color temperature and level per mode<br />
Change color temperature over time<br />
Stop changing color temperature<br />
Activate Scenes, Adjust Shades or Fans <br />
Activate scenes<br />
Activate scenes per mode<br />
Open shades<br />
Close shades<br />
Set shade position<br />
Set fan speed<br />
Cycle fans<br />
Control HSM, Garage Doors, Locks or Valves <br />
Arm/Disarm Hubitat® Safety Monitor<br />
Open garage door<br />
Close garage door<br />
Lock locks<br />
Unlock locks<br />
Open valves<br />
Close valves<br />
Control Thermostats or Thermostat Scheduler <br />
Set thermostats<br />
Set Thermostat Scheduler<br />
Send, Speak, or Log a Message, Send HTTP Request <br />
Send or Speak a Message<br />
Log a Message<br />
Send HTTP Get<br />
Send HTTP Post<br />
Control Music Player, Volume, Sounds<br />
Control Music Player<br />
Set Volume<br />
Mute<br />
Unmute<br />
Sound Tone<br />
Sound Chime<br />
Control Siren<br />
Set Mode or Variables, Run Custom Action <br />
Set Mode<br />
Run Custom Action<br />
Write to local file<br />
Append to local file<br />
Delete local file<br />
Set Private Boolean, Run/Cancel/Pause Rules <br />
Set Private Booleans True<br />
Set Private Booleans False<br />
Run Rule Actions<br />
Cancel Rule Timers<br />
Pause Rules<br />
Resume Rules<br />
Capture/Restore, Device Refresh or Polling <br />
Capture Devices<br />
Restore Devices<br />
Refresh devices<br />
Poll devices<br />
Start Z-Wave poll on switches<br />
Stop Z-Wave poll on switches<br />
Start Z-Wave poll on dimmers<br />
Stop Z-Wave poll on dimmers<br />
Delay or Repeat Actions, Wait <br />
Delay Actions<br />
Delay Actions Per Mode<br />
Cancel Delayed Actions<br />
Repeat Actions<br />
END-REP<br />
Stop Repeating Actions<br />
Wait for Events<br />
Wait for Condition<br />
Cancel Wait<br />
Exit Rule<br />
Comment</pre><br />
<br />
===<big>Export, Import or Clone of Rule Machine Rules</big>===<br />
<big>Select this option to allow export of your Rule Machine rules for import to another hub, or to clone an existing rule as a base from which to start a new rule.</big><br />
[[File:Export Import and Clone RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/99/Export_Import_and_Clone_RM_rule_v2.png<br />
]]<br />
<br />
====<big>Export a Rule</big>====<br />
<br />
#<big>Select a single or multiple rules for '''Export'''. You may export multiple rules to a single file, and still have the option to select which rules to later '''Import'''.</big>[[File:Export Selected RM rules v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/00/Export_Selected_RM_rules_v2.png ]]<br />
#<big>Press the '''Download''' button to save the file to your local drive in the designated file download location for your browser. Typically this will be your '''Downloads''' folder.</big>[[File:Export RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/52/Export_RM_rule_v2.png ]]<br />
<br />
====<big>Restore or Import a Rule</big>====<br />
<big>You may choose to '''Restore''' a rule instead of using the '''Import''' option. This is most appropriate for instances where you want to bring a Rule Machine rule into your hub database, but you do not want to change the name or the devices used in the rule. If you instead choose to '''Import''', the process will pause to allow the rule to be renamed, and the devices used in the rule to be substituted with other devices installed on your hub before completing the import process.</big><br />
<br />
'''<big>Restore</big>'''<br />
<br />
#<big>To '''Restore''', select the saved file you previously exported, then press the '''Restore''' button.</big>[[File:Restore RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/6b/Restore_RM_rule.png ]]<br />
<br />
'''<big>Import</big>'''<br />
<br />
#<big>To '''Import''', select the saved file you previously exported and press the '''Import...''' button.</big>[[File:Import RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/c/c9/Import_RM_rule.png ]]<br />
#<big>Select the rules for import.</big>[[File:Selected RM rule for import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/16/Selected_RM_rule_for_import.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big><br />
#*<big>'''NOTE:''' If you '''Import''' a rule to another hub without selecting replacement devices, any existing devices with those same names will be used in the imported rule. If the devices do not exist, virtual devices with those same names will automatically be created. This is very helpful when you need to replace devices of an imported rule, but do not yet have the devices available that will replace them.</big>[[File:Rename and change RM devices before import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/da/Rename_and_change_RM_devices_before_import.png ]]<br />
#<big>When ready to import, press the '''Import ['''rule name''']''' button.</big>[[File:Rule Machine Import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/1a/Rule_Machine_Import.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been imported.</big>[[File:RM Import confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/9c/RM_Import_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps.</big>[[File:Show imported Rule-5 rules.png|none|thumb|600x600px]]<br />
#*<big>'''<span style="color: red;;">IMPORTANT!</span>''' - If you import rules that contain a Private Boolean, it must be manually adjusted after importing the rule. In the following example, you will see that an imported rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]][[File:Imported rule with PB not pointing anywhere.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d4/Imported_rule_with_PB_not_pointing_anywhere.png ]]<br />
<br />
====<big>Clone a Rule</big>====<br />
<br />
#<big>To '''Clone''' a rule, select the rule from the list of available Rule Machine rules on your hub and press the '''Clone''' button.</big>[[File:Select Rule Machine rule for clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/2d/Select_Rule_Machine_rule_for_clone.png ]][[File:Initiate Rule Machine cloning.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/68/Initiate_Rule_Machine_cloning.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big>[[File:Rename and change RM devices before clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/dd/Rename_and_change_RM_devices_before_clone.png ]]<br />
#<big>When ready to proceed, press the '''Clone ['''rule name''']''' button.</big>[[File:Clone Rule Machine rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/55/Clone_Rule_Machine_rule.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been cloned.</big>[[File:RM rule clone confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/46/RM_rule_clone_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps. If you did not change the name, the rule will be imported under the same name, but it will have the word '''clone''' added to the end.</big>[[File:Show cloned Rule-5 rule.png|none|thumb|600x600px]]<br />
#*<big><span style="color: red;;">'''IMPORTANT!'''</span> If you '''Clone''' rules that contain a Private Boolean, it must be manually corrected after cloning the rule. In the following example, you will see that a cloned rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]] [[File:Cloned rule with incorrect PB setting.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/48/Cloned_rule_with_incorrect_PB_setting.png ]]</div>Doughttps://docs.hubitat.com/index.php?title=App_Documentation&diff=5170App Documentation2021-07-13T23:22:06Z<p>Doug: </p>
<hr />
<div>*[[Amazon Echo App|<big>Amazon Echo App</big>]]<br />
*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*[[Basic Rules|<big>Basic Rules</big>]]<br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration&action=edit&redlink=1|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-5.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Thermostat Scheduler|<big>Thermostat Scheduler]]<br />
*[[Zone Motion Controllers|Zone Motion Controllers]]<br />
*[[Z-Wave Poller]]<br />
<br />
[[File:Doc Card Document List.png|frameless|alt=Go to the full document list|link=Hubitat_Elevation_Documentation]]<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=Rule-5.0&diff=5168Rule-5.02021-07-13T22:22:55Z<p>Doug: </p>
<hr />
<div>{{DISPLAYTITLE:Rule-5.0}}<br />
{{Top}}<h1><big>Rule Machine<sup>®</sup> 5.0</big></h1><big>Rule-5.0 is the culmination of a journey in the transformation of the Rule Machine app. All at once, it simplifies and adds power, resulting in a fully generalized automation engine. The prior top-level organization of Rule Machine has been replaced with an optimized interface. The changes described below, explain how prior rules were created versus how it is accomplished with Rule-5.0. The former structure of Rules, Triggers, Triggered Rules, Actions and Schedules are now replaced with the definition of what causes a rule to run, and the resulting action. The former Button Controller app is now incorporated into Rule Machine, but with increased power and flexibility. New conditional logic capabilities are provided, allowing the most subtle or complex automations to be created. You simply define what causes the a rule to run, and then that you want it to do.</big><br />
===<big>Logic in a Rule-5.0 rule</big>===<br />
<big>In any Rule, the rule itself can be thought of as an overarching '''IF-THEN-ELSE''', where if the condition was '''True''' for the '''IF''' part or the rule, then '''Actions for True''' are run, and if they are '''False''', then '''Actions for False''' are run. In '''Rule-4.0''', this same logic can now simply be done with the '''Conditional Actions''' of '''IF-THEN and ELSE''' in the '''Actions''' section of a rule. As described in the next section, '''IF-THEN''' now has the same full logical expression capability previously available, with the addition of '''AND, OR, XOR, NOT''' logical operators, and nested parenthetical sub-expressions.</big><br />
<br />
*<big>'''Example:''' Using a Trigger Event such as a contact sensor '''Front Door *changed*''' to illustrate the difference, the previous Rule Machine version used this to interpret the '''Condition of Front Door *open*.''' The rule was evaluated whenever '''any''' event happened for the Front Door. In Rule-4.0, this is explicit, whereas in previous versions the rule was '''Front Door *open*''', we now make that event the Condition of an '''IF-THEN''' action. What were formerly '''Actions for True''', now become the Actions following '''IF-THEN''', and the former '''Actions for False''' become the actions following '''ELSE'''. Most Rules will now follow this basic format.</big><br />
<br />
===<big>Rule Triggers</big>===<br />
<big>All "Rules" in Rule-5.0 are in effect '''Triggered Rules'''. They each have a '''Trigger Event''', and then '''Conditional Actions'''. Instead of a rule with '''Actions for True''' and '''Actions for False''', they simply use conditional logic in the actions to create an equivalent '''IF-THEN-ELSE''' structure.</big><br />
===<big>Events</big>===<br />
<big>Each rule can have one or more '''Trigger Events''' that when triggered, cause the rule's actions to run.</big><p><big>Events are created by the devices or conditions in your system. Each device creates events appropriate to the type of device. A '''Trigger Event''' listens for specific events and when a trigger receives a selected event, it causes the defined '''Actions''' to run.</big></p><p><big>Rule Machine allows the following events in a Hubitat Elevation system to be acted upon. Each event results in a single test and the supported events and states that can be tested are listed below. For each event that refers to a device, one or more devices can be selected, and then the device state required for the '''Condition''' to be met can be selected. When multiple devices are selected, the Condition/Event may apply for '''ANY''' (default) or '''ALL''' of the devices.</big></p><pre>Acceleration: active / inactive<br />
Between two dates: starting month on this date / ending month on this date<br />
Battery: value<br />
Button: pressed / held / doubleTapped / released<br />
Button Device: select actions for any buttons of a button device<br />
Certain Time: at a certain time, including sunrise / sunset with offset<br />
Cloud End Point: hitting URL fires<br />
Contact: open / closed<br />
Custom attribute: device capability<br />
Days of Week: on certain days of the week<br />
Dimmer level: value<br />
Door: open, closed, opening, closing, unknown<br />
Energy meter: value<br />
Garage door: open, closed, opening, closing, unknown<br />
HSM alert: intrusion, intrusion-delay, intrusion-home, intrusion-home-delay, intrusion-night, cancelRuleAlerts, intrusion-night-delay, <br />
smoke, water, rule, arming, armingHome, armingNight, cancel<br />
HSM status: armed away, armed home, armed night, delayed arming home, delayed arming night, delayed arming away, disarmed, all disarmed<br />
Humidity: value<br />
Illuminance: value<br />
Last Event Device select device and attribute<br />
Local End Point: hitting URL fires<br />
Lock: locked / unlocked<br />
Mode: any of your hub's modes<br />
Motion: active / inactive<br />
Music player: playing, paused, stopped<br />
Periodic: allows periodic schedules for minutes, hourly, daily, weekly, monthly or yearly<br />
Physical dimmer level: value <br />
Physical switch: on / off<br />
Power meter: value<br />
Power source: mains / battery<br />
Presence: present / not present or arrives / leaves<br />
Private Boolean: true / false<br />
Rule paused: rule<br />
Smoke detector: clear, detected, tested<br />
Switch: on / off<br />
Temperature: value<br />
Thermostat cool setpoint: value<br />
Thermostat fan mode: value<br />
Thermostat heat setpoint: value<br />
Thermostat mode: heat / cool / auto / off / emergency heat<br />
Thermostat state: heating / cooling / fan only / idle / pending heat / pending cool<br />
Time of day: specific time / sunrise / sunset<br />
Variable: value<br />
Water sensor: dry / wet<br />
<br />
Note: value means compare current value to a number, to another device with an offset, or to a variable with an offset, or changed, increased, decreased</pre><br />
===<big>Actions</big>===<br />
<big>Actions are the portion of a rule that defines what the rule does when it is triggered to run.</big><br />
====<big>Actions as ordered script</big>====<br />
<big>As you define actions, you are creating a script of actions to perform when the rule runs. You may use as many actions as you want for each '''Action''' type and they can be run in whatever order you want. There is no predefined order of execution for Rule Machine actions, so you may arrange the order of actions any way you want. You can insert a new action anywhere in the list of actions, or at the end of the list.</big><br />
====<big>Actions can be modified</big>====<br />
<big>The Rule-5.0 user interface provides the ability to '''Edit''' and '''Delete''' any action you have defined, giving you complete control over your list of actions.</big> <br />
[[File:Rule-5.0 Edit and Delete Actions.png|none|thumb|600x600px]]<br />
<big>You may also '''Cut''' and then '''Paste''' actions if you need them to occur in a different order.</big><br />
<br />
#Select the action to cut.<br />
#Choose the new position for the action you just cut. The desired position could also be the end of the action list by choosing to paste the action before '''**End of Actions**''', which would paste the cut action at the end of the action list.[[File:Rule-5 cut action.png|none|thumb|600x600px]][[File:Rule-5.0 Paste Action Before v2.png|none|thumb|600x600px]][[File:Rule-5 action position after paste action.png|none|thumb|600x600px]]<br />
<br />
====<big>Delay Actions and Delay Actions per Mode</big>====<br />
<big>All actions can be delayed, effectively pausing the action execution for a specified amount of time. A</big><big>ctions</big> <big>may</big> <big>also be delayed for a period of time that is dependent on the current '''Mode''' by using '''Delay Actions Per Mode'''.</big><br />
<br />
<big>'''Delay per Action'''</big><br />
<br />
<big>Each action you define can have an optional delay. These delays can be defined with hours, minutes, and seconds. Seconds can have decimal fractions, allowing millisecond resolution. In a rule, delays can have the '''option to be cancelled''' in the event of a change of rule truth. It is important to realize that the delay assigned to an individual action affects only that action, and not subsequent actions. Any subsequent action is executed immediately after the delayed action starts its delay timer, and does not wait for that delay timer to run. When the delay timer expires, the delayed action is executed (unless the delay was cancelled).</big><br />
[[File:Rule Machine Delay per action.png|none|thumb|600x600px]]<br />
<big>'''Delay all Actions'''</big><br />
<br />
<big>It is also possible to delay all actions (also with optional cancel). The script of actions runs sequentially when the rule runs, with each action happening in order. Actions with delays start their timer, which can vary for each action, and '''<u>the next action in order</u>''' runs. By using '''Delay Actions''', the entire script can be ''paused'' by a delay.</big><br />
<br />
<big>'''Delay Actions per Mode'''</big><br />
<br />
<big>Delay Actions can also be specified on a per mode basis, so that the time the script is paused, varies according to the current mode.</big><br />
===<big>Rule-5.0 Conditional Actions and Logical Expressions</big>===<br />
<big>In Rule Machine, '''IF-THEN-ELSE-ENDIF''' conditional blocks can be nested. The user interface utilizes textual indentation to help guide you in keeping track of which '''IF-THEN-ELSE-ENDIF''' block you are currently adding actions to. The user is responsible for completing each level of nested '''IF-THEN''' blocks.</big><br />
<br />
<big>The condition of an '''IF-THEN''' or '''ELSE-IF''' Action can be a full logical expression built-up from individual conditions, and the logical operators '''AND''', '''OR''', '''XOR''', and '''NOT'''. Parenthesized sub-expressions are also possible. This is the same user interface of the former rule portion found in Rule or Triggered Rule from Rule-3.0. An individual '''Condition''' can be created ''on the fly'' while defining a logical expression. Every such '''Condition''' is kept in the list of available Conditions. This list of available conditions is present in the '''Define Actions''' page. The user interface then allows Creating, Editing and Deleting conditions. If a condition is edited, those changes will be reflected where it is used in an '''IF-THEN''' or '''ELSE-IF''' conditional action.</big><br />
<br />
<big>This combination of nested '''IF-THEN''' blocks and full logical expression for each '''IF-THEN''' and '''ELSE-IF''', allows creativity for rules in Rule-4.0 that is limited only by your imagination. To help you with complex logic structures, new actions are available.</big><br />
<br />
#<big>Exit Rule - With Exit Rule the execution of '''Actions''' for that rule will stop, irrespective of what order in the rule it exists.</big><br />
#<big>Pending Delays are not cancelled, and current Repetitions are not stopped by Exit Rule, but these can be managed separately if needed with '''Stop Repeating Actions''', '''Cancel Rule Timers''', and '''Cancel Delayed Actions''', where appropriate.</big><br />
<br />
====<big>Automatic Condition Creation</big>====<br />
<big>When '''Event Triggers''' are defined, corresponding conditions are created for most types. Some conditions, like '''Button''', '''Certain Time''', etc, do not have a ''state'' and so have no corresponding condition. These created conditions are available in the '''Define Actions''' page for use in '''Conditional Actions''', are available for use in other Actions, and can be edited.</big><br />
<br />
====<big>IF-THEN-ELSE</big>====<br />
<big>You can introduce conditional execution of actions using the following method.</big><br />
IF (condition) THEN <br />
some actions...<br />
ELSE-IF (condition) THEN <br />
some actions...<br />
ELSE <br />
some actions...<br />
END-IF <br />
<big>'''IF-THEN''' and '''ELSE-IF''' both accept a logical expression as described above and '''IF-THEN-ELSE''' may also be nested. If the expression on the '''IF''' portion is True, then those actions following '''IF''' and before any '''ELSE-IF''' or '''ELSE''' statements will be carried out. If the expression is False, then those actions are skipped, and the '''ELSE''' portion or '''ELSE-IF''' are carried out. In the case of '''ELSE-IF''', its expression will be tested, and the following Actions that follow it will either run or will not run, depending on the result of the evaluation. There can be as many '''ELSE-IF''' sections as you need, and the '''ELSE-IF''' and '''ELSE''' portions are both are optional. '''END-IF''' is also optional, and if omitted means all remaining actions are part of the preceding '''IF-THEN''', '''ELSE-IF''' or '''ELSE'''. However, for good rule structure, just a sentence should have a period at the end, it is strongly recommended that you use END-IF to complete an '''IF-THEN-ELSE''' as a regular practice.</big><br />
===<big>Repeat Actions</big>===<br />
<big>Portions of, or all of the script of an '''Action''' can be repeated periodically, but you must specify the time interval for the repetition. Be careful not to make this interval too short, as you can consume your hub CPU resources by repeating too quickly. You can select any number of iterations if desired, but some method to stop the repetition is required. When a '''Repeat Actions''' is introduced to the script, any action before '''END-REP''' will be repeated. Only the Actions between '''Repeat Actions''' and '''END-REP''' will be repeated. Actions following '''END-REP''' will run only once the repetition has stopped. There is an optional '''Stop for a Repeat Action''' choice and if selected, then '''Stop Repeating Actions''' will stop this repetition. Using '''Cancel Rule Timers''' from either the current rule or another rule, will stop '''<u>all Repeat Actions</u>''', irrespective of which Stop selection is used.</big><br />
Repeat Actions<br />
some actions...<br />
END-REP<br />
<big>A '''Repeat Actions''', like any action, can have a condition specified. If the condition is False, the '''Repeat Actions''' block will not be executed. If the condition becomes False during repetition, the repetition will be stopped (with the exception of when '''Repeat N Times''' is selected). This provides three features well known to computer programmers.</big><br />
<br />
#<big>While-loop - The '''while-loop''' runs only if the condition is true, and stops if it is false.</big><br />
#<big>For-loop - A '''for-loop''' runs for a fixed number of times, but if a condition exists, it will only start that iteration if the condition is true; The condition is not retested during iteration.</big><br />
#<big>Repeat-until loop - A repeat-until loop runs until a condition becomes true, running at least once.</big><br />
<br />
'''<big>Examples:</big>'''<br />
<br />
''<big>While loop - repeat while the condition is True:</big>''<br />
IF (condition) Repeat Actions<br />
some actions...<br />
END-REP<br />
''<big>For loop (repeat n times):</big>''<br />
Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Conditional For loop (repeat n times if condition is True):</big>''<br />
IF (condition) Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Repeat-Until loop:</big>''<br />
Repeat Actions with Stop selected<br />
some actions<br />
IF (condition) Stop Repeating Actions<br />
END-REP<br />
<big>'''Repeat Actions''' cannot be nested. '''END-REP''' is optional, and if omitted, all actions after '''Repeat Actions''' will be repeated.</big><br />
<br />
*<big>'''Note''': The '''END-REP''' does not have anything to do with the when a '''Repeated Action''' will stop repeating, it merely marks the end of the list of actions to be repeated. If you use '''Repeat These Actions''' without specifying '''N Times''' (for loop), and without a '''Condition''' (while loop), and also without a '''Conditional Stop''' or a '''Stop on Truth Change''' (for rules only), that means it should repeat <u>forever</u>, and that is probably not what you want to have happen. In that case, some other rule would need to cause the repetition to stop.</big><br />
<br />
===<big>Wait for Events and Wait for Condition</big>===<br />
<big>'''Wait for Events''' pauses rule execution until some specified event occurs. Multiple events can be defined to cause the wait to end. In effect, this introduces another trigger-like capability into the Actions. There is also an event type specifically for '''Wait for Events''' named '''Elapsed Time'''. When the '''Elapsed Time''' expires, the wait will be over, irrespective of other events it may be waiting for.</big><br />
<br />
<big>'''Wait for Condition''' is similar to '''Wait for Events''', but instead a '''Condition''' is evaluated. If the condition is true, no wait occurs, otherwise the rule execution is paused until the condition is met. '''Wait for Events''' and '''Wait for Condition''' may both be used in a '''Simple Conditional Action'''. Additionally, both pending '''Wait for Events''' and '''Wait for Condition''' will be cancelled each time a rule is triggered, and can be also cancelled by another rule with '''Stop Rule Actions''', or by a '''Cancel Wait''' action (which presumably would have been part of a Delayed Action).</big><br />
===<big>Custom Actions</big>===<br />
<big>A Custom Action allows you to select a device, and send any of the commands that device supports along with parameters it may take. While the former Custom Commands need to be pre-defined and were available to all rules, a '''Custom Action''' is created within your actions and is specific to the rule where it is created.</big><br />
===<big>Run Actions from the Rule-5.0 User Interface</big>===<br />
<big>When you first create a new rule, you are creating a child app of the parent Rule Machine app, and therefor you must select '''Done''' on the main page to install the Rule-5.0 rule. If you re-open the rule, its actions can be run by hitting '''Run Actions''' button. If you change the '''Trigger Events''' in any way, you must either select '''Done''' or the '''Update Rule''' button.</big><br />
<br />
===<big>Rule Logging</big>===<br />
<big>You can select which types of logging you want to see in [https://docs.hubitat.com/index.php?title=Logs Logs]. This is a very good way to determine exactly what a rule is doing.</big><br />
===<big>List of Actions</big>===<br />
<pre> Conditional Actions <br />
IF (conditions) THEN<br />
ELSE-IF (conditions) THEN<br />
ELSE<br />
END-IF<br />
Simple Conditional Action<br />
Control Switches, Push Buttons <br />
Turn switches on<br />
Turn switches off<br />
Toggle switches<br />
Flash switches<br />
Set switches per mode<br />
Push a button<br />
Push a button per mode<br />
Set Dimmers and Bulbs <br />
Set dimmer level<br />
Toggle dimmer level<br />
Adjust dimmer level<br />
Set dimmer level per mode<br />
Fade dimmer level over time<br />
Stop dimmer fade<br />
Start raising dimmer level<br />
Start lowering dimmer level<br />
Stop changing dimmer level<br />
Set color and level<br />
Toggle color and level<br />
Set color and level per mode<br />
Set color temperature and level<br />
Toggle color temperature and level<br />
Set color temperature and level per mode<br />
Change color temperature over time<br />
Stop changing color temperature<br />
Activate Scenes, Adjust Shades or Fans <br />
Activate scenes<br />
Activate scenes per mode<br />
Open shades<br />
Close shades<br />
Set shade position<br />
Set fan speed<br />
Cycle fans<br />
Control HSM, Garage Doors, Locks or Valves <br />
Arm/Disarm Hubitat® Safety Monitor<br />
Open garage door<br />
Close garage door<br />
Lock locks<br />
Unlock locks<br />
Open valves<br />
Close valves<br />
Control Thermostats or Thermostat Scheduler <br />
Set thermostats<br />
Set Thermostat Scheduler<br />
Send, Speak, or Log a Message, Send HTTP Request <br />
Send or Speak a Message<br />
Log a Message<br />
Send HTTP Get<br />
Send HTTP Post<br />
Control Music Player, Volume, Sounds<br />
Control Music Player<br />
Set Volume<br />
Mute<br />
Unmute<br />
Sound Tone<br />
Sound Chime<br />
Control Siren<br />
Set Mode or Variables, Run Custom Action <br />
Set Mode<br />
Run Custom Action<br />
Write to local file<br />
Append to local file<br />
Delete local file<br />
Set Private Boolean, Run/Cancel/Pause Rules <br />
Set Private Booleans True<br />
Set Private Booleans False<br />
Run Rule Actions<br />
Cancel Rule Timers<br />
Pause Rules<br />
Resume Rules<br />
Capture/Restore, Device Refresh or Polling <br />
Capture Devices<br />
Restore Devices<br />
Refresh devices<br />
Poll devices<br />
Start Z-Wave poll on switches<br />
Stop Z-Wave poll on switches<br />
Start Z-Wave poll on dimmers<br />
Stop Z-Wave poll on dimmers<br />
Delay or Repeat Actions, Wait <br />
Delay Actions<br />
Delay Actions Per Mode<br />
Cancel Delayed Actions<br />
Repeat Actions<br />
END-REP<br />
Stop Repeating Actions<br />
Wait for Events<br />
Wait for Condition<br />
Cancel Wait<br />
Exit Rule<br />
Comment</pre><br />
<br />
===<big>Export, Import or Clone of Rule Machine Rules</big>===<br />
<big>Select this option to allow export of your Rule Machine rules for import to another hub, or to clone an existing rule as a base from which to start a new rule.</big><br />
[[File:Export Import and Clone RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/99/Export_Import_and_Clone_RM_rule_v2.png<br />
]]<br />
<br />
====<big>Export a Rule</big>====<br />
<br />
#<big>Select a single or multiple rules for '''Export'''. You may export multiple rules to a single file, and still have the option to select which rules to later '''Import'''.</big>[[File:Export Selected RM rules v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/00/Export_Selected_RM_rules_v2.png ]]<br />
#<big>Press the '''Download''' button to save the file to your local drive in the designated file download location for your browser. Typically this will be your '''Downloads''' folder.</big>[[File:Export RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/52/Export_RM_rule_v2.png ]]<br />
<br />
====<big>Restore or Import a Rule</big>====<br />
<big>You may choose to '''Restore''' a rule instead of using the '''Import''' option. This is most appropriate for instances where you want to bring a Rule Machine rule into your hub database, but you do not want to change the name or the devices used in the rule. If you instead choose to '''Import''', the process will pause to allow the rule to be renamed, and the devices used in the rule to be substituted with other devices installed on your hub before completing the import process.</big><br />
<br />
'''<big>Restore</big>'''<br />
<br />
#<big>To '''Restore''', select the saved file you previously exported, then press the '''Restore''' button.</big>[[File:Restore RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/6b/Restore_RM_rule.png ]]<br />
<br />
'''<big>Import</big>'''<br />
<br />
#<big>To '''Import''', select the saved file you previously exported and press the '''Import...''' button.</big>[[File:Import RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/c/c9/Import_RM_rule.png ]]<br />
#<big>Select the rules for import.</big>[[File:Selected RM rule for import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/16/Selected_RM_rule_for_import.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big><br />
#*<big>'''NOTE:''' If you '''Import''' a rule to another hub without selecting replacement devices, any existing devices with those same names will be used in the imported rule. If the devices do not exist, virtual devices with those same names will automatically be created. This is very helpful when you need to replace devices of an imported rule, but do not yet have the devices available that will replace them.</big>[[File:Rename and change RM devices before import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/da/Rename_and_change_RM_devices_before_import.png ]]<br />
#<big>When ready to import, press the '''Import ['''rule name''']''' button.</big>[[File:Rule Machine Import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/1a/Rule_Machine_Import.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been imported.</big>[[File:RM Import confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/9c/RM_Import_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps.</big>[[File:Show imported Rule-5 rules.png|none|thumb|600x600px]]<br />
#*<big>'''<span style="color: red;;">IMPORTANT!</span>''' - If you import rules that contain a Private Boolean, it must be manually adjusted after importing the rule. In the following example, you will see that an imported rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]][[File:Imported rule with PB not pointing anywhere.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d4/Imported_rule_with_PB_not_pointing_anywhere.png ]]<br />
<br />
====<big>Clone a Rule</big>====<br />
<br />
#<big>To '''Clone''' a rule, select the rule from the list of available Rule Machine rules on your hub and press the '''Clone''' button.</big>[[File:Select Rule Machine rule for clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/2d/Select_Rule_Machine_rule_for_clone.png ]][[File:Initiate Rule Machine cloning.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/68/Initiate_Rule_Machine_cloning.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big>[[File:Rename and change RM devices before clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/dd/Rename_and_change_RM_devices_before_clone.png ]]<br />
#<big>When ready to proceed, press the '''Clone ['''rule name''']''' button.</big>[[File:Clone Rule Machine rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/55/Clone_Rule_Machine_rule.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been cloned.</big>[[File:RM rule clone confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/46/RM_rule_clone_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps. If you did not change the name, the rule will be imported under the same name, but it will have the word '''clone''' added to the end.</big>[[File:Show cloned Rule-5 rule.png|none|thumb|600x600px]]<br />
#*<big><span style="color: red;;">'''IMPORTANT!'''</span> If you '''Clone''' rules that contain a Private Boolean, it must be manually corrected after cloning the rule. In the following example, you will see that a cloned rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]] [[File:Cloned rule with incorrect PB setting.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/48/Cloned_rule_with_incorrect_PB_setting.png ]]</div>Doughttps://docs.hubitat.com/index.php?title=App_Documentation&diff=5167App Documentation2021-07-13T18:31:36Z<p>Doug: </p>
<hr />
<div>*[[Amazon Echo App|<big>Amazon Echo App</big>]]<br />
*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*[[Basic Rules|<big>Basic Rules</big>]]<br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration&action=edit&redlink=1|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-4.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Thermostat Scheduler|<big>Thermostat Scheduler]]<br />
*[[Zone Motion Controllers|Zone Motion Controllers]]<br />
*[[Z-Wave Poller]]<br />
<br />
[[File:Doc Card Document List.png|frameless|alt=Go to the full document list|link=Hubitat_Elevation_Documentation]]<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Elevation_Documentation&diff=5166Hubitat Elevation Documentation2021-07-13T18:31:11Z<p>Doug: /* Hubitat Elevation User Interface */</p>
<hr />
<div><br />
==[[Getting Started|<big>Getting Started</big>]]==<br />
<br />
#[[Registration and setup|<u>'''<big>Registration and setup</big>'''</u>]]<br />
#[[Navigating the hub interface|<big>Navigating the hub interface</big>]]<br />
#[[Discovering your Devices|<big>Discovering your Devices</big>]]<br />
#[[Automating your Devices|<big>Automating your Devices</big>]]<br />
#[[Care and Maintenance|<big>Care and Maintenance</big>]]<br />
#[[How to Collect Information for Support|<big>Support</big>]]<br />
<br />
==<big>Subscription Services</big>==<br />
<br />
*[[Hub Protect|<big>Hub Protect</big>]]<br />
*[[Remote Admin|<big>Remote Admin</big>]]<br />
<br />
==<big>Hubitat Elevation User Interface</big>==<br />
<br />
'''<big>Main Menu</big>'''<br />
<br />
*'''<big>[[Home]]</big>'''<br />
*[[Location and Modes|'''<big>Location and Modes</big>''']]<br />
*'''<big>[[Devices]]</big>'''<br />
**[[Device Discovery|<big>Device Discovery</big>]]<br />
**[[Device Detail|<big>Device Detail</big>]]<br />
**[[Device Events|<big>Device Events</big>]]<br />
*'''<big>[[Apps]]</big>''' <br />
**[[App Status|<big>App Status</big>]]<br />
**[[App Events|<big>App Events</big>]]<br />
*'''<big>[[Settings]]</big>'''<br />
**[[Hub Details|<big>Hub Details</big>]]<br />
**[[Hub Login Security|<big>Hub Login Security</big>]]<br />
**[[Location and Modes|<big>Location and Modes</big>]]<br />
**[[Z-Wave Details|<big>Z-Wave Details</big>]]<br />
**[[Zigbee Details|<big>Zigbee Details</big>]]<br />
***[[Zigbee Logs|<big>Zigbee Logs</big>]]<br />
**[[Check For Updates|<big>Check For Updates</big>]]<br />
**[[File Manager|<big>File Manager</big>]]<br />
**[[Backup and Restore|<big>Backup and Restore</big>]]<br />
**[[Discover Zigbee and Z-Wave Devices|<big>Discover Zigbee and Z-Wave Devices</big>]]<br />
**[[Hub Mesh|<big>Hub Mesh</big>]]<br />
**<big>[[Networking]]</big><br />
<br />
'''<big>Advanced Features</big>'''<br />
<br />
*[[Apps Code|<big>Apps Code</big>]]<br />
*[[Drivers Code|<big>Drivers Code</big>]]<br />
*[[System Events|<big>System Events</big>]]<br />
**[[Hub Events|<big>Hub Events</big>]]<br />
**[[Location Events|<big>Location Events</big>]]<br />
*<big>[[Logs]]</big><br />
**[[Past Logs|<big>Past Logs</big>]]<br />
*[[Hubitat Diagnostic Tool|<big>Hubitat Diagnostic Tool</big>]]<br />
*[[Soft Reset|<big>Soft Reset</big>]]<br />
<br />
==<big>App Documentation</big>==<br />
<br />
*[[Amazon Echo App|<big>Amazon Echo App</big>]]<br />
*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*<big>[[Basic Rules]]</big><br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-4.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Zone Motion Controllers|<big>Zone Motion Controllers</big>]]<br />
*[[Z-Wave Poller|<big>Z-Wave Poller</big>]]<br />
<br />
==<big>Device Documentation</big>==<br />
<br />
*[[Orbit Hose Water Timer|<big>Orbit Hose Water Timer</big>]]<br />
<br />
*<big>[[Pushover]]</big><br />
<br />
*<big>[[SecurityKeypads]]</big><br />
<br />
*[[Twilio Notification|<big>Twilio Notification</big>]]<br />
<br />
==<big>Compatible Devices</big>==<br />
<br />
[[List of Compatible Devices|'''<big>List of Compatible Devices</big>''']]<br />
<br />
[[Join and Reset Instructions|<big>Join and Reset Instructions</big>]]<br />
<br />
==<big>How-to Guides</big>==<br />
<br />
[[Hub Placement Tips|<big>Hub Placement Tips</big>]]<br />
<br />
[[How to collect information for support|<big>How to collect information for support</big>]]<br />
<br />
[[How to cancel subscription services|<big>How to cancel subscription services</big>]]<br />
<br />
[[How to Build a Solid Zigbee Mesh|<big>How to Build a Solid Zigbee Mesh</big>]]<br />
<br />
[[How to Build a Solid Z-Wave Mesh|<big>How to Build a Solid Z-Wave™ Mesh</big>]]<br />
<br />
[[How to remove a Z-Wave device|<big>How to remove a Z-Wave™ device</big>]]<br />
<br />
[[The Anatomy of Z-Wave™ Repair|<big>The Anatomy of Z-Wave™ Repair</big>]]<br />
<br />
[[How to update your hub|<big>How to update your hub</big>]]<br />
<br />
[[How to backup your hub|<big>How to backup your hub</big>]]<br />
<br />
[[How to change your location|<big>How to change your location</big>]]<br />
<br />
[[How to add/change a mode|<big>How to add/change a mode</big>]]<br />
<br />
[[How to Install Custom Apps|<big>How to Install Custom Apps</big>]]<br />
<br />
[[How to Install Custom Drivers|<big>How to Install Custom Drivers</big>]]<br />
<br />
[[Hub Login Security|<big>How to add password protection</big>]]<br />
<br />
[[How to Manage Lock Codes|<big>How to Manage Lock Codes</big>]]<br />
<br />
<big>[[How to create new presence and push notification devices]]</big><br />
<br />
<big>[[How to setup mobile presence sensing]]</big><br />
<br />
[[How to manage accounts linked to your hub|<big>How to manage accounts linked to your hub</big>]]<br />
<br />
[[How to correct a Multi Admin error|<big>How to correct a Multi Admin error</big>]]<br />
<br />
[[How to disable Hub Login Security to recover access|<big>How to disable Hub Login Security to recover access</big>]]<br />
<br />
[[How to use Dashboard to Manage Lock Codes|<big>How to use Dashboard to Manage Lock Codes</big>]]<br />
<br />
==<big>Compliance Documentation</big>==<br />
<br />
[[Z-Wave Manual|'''<big>Z-Wave User Manual</big>''']]<br />
<br />
==<big>Developer Documentation</big>==<br />
<br />
[[Developer Documentation|<big>Developer Documentation</big>]]<br />
<br />
[[Driver Capability List|<big>Driver Capability List</big>]]<br />
<br />
==<big>Platform</big>==<br />
[[Release Notes|'''<big>Release Notes</big>''']]<br />
<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=App_Documentation&diff=5165App Documentation2021-07-13T18:27:53Z<p>Doug: </p>
<hr />
<div>*[[Amazon Echo App|<big>Amazon Echo App</big>]]<br />
*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*[[Basic Rules|<big>Basic Rules</big>]]<br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration&action=edit&redlink=1|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-5.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Thermostat Scheduler|<big>Thermostat Scheduler]]<br />
*[[Zone Motion Controllers|Zone Motion Controllers]]<br />
*[[Z-Wave Poller]]<br />
<br />
[[File:Doc Card Document List.png|frameless|alt=Go to the full document list|link=Hubitat_Elevation_Documentation]]<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Elevation_Documentation&diff=5164Hubitat Elevation Documentation2021-07-13T18:26:41Z<p>Doug: </p>
<hr />
<div><br />
==[[Getting Started|<big>Getting Started</big>]]==<br />
<br />
#[[Registration and setup|<u>'''<big>Registration and setup</big>'''</u>]]<br />
#[[Navigating the hub interface|<big>Navigating the hub interface</big>]]<br />
#[[Discovering your Devices|<big>Discovering your Devices</big>]]<br />
#[[Automating your Devices|<big>Automating your Devices</big>]]<br />
#[[Care and Maintenance|<big>Care and Maintenance</big>]]<br />
#[[How to Collect Information for Support|<big>Support</big>]]<br />
<br />
==<big>Subscription Services</big>==<br />
<br />
*[[Hub Protect|<big>Hub Protect</big>]]<br />
*[[Remote Admin|<big>Remote Admin</big>]]<br />
<br />
==<big>Hubitat Elevation User Interface</big>==<br />
<br />
'''<big>Main Menu</big>'''<br />
<br />
*'''<big>[[Home]]</big>'''<br />
*[[Location and Modes|'''<big>Location and Modes</big>''']]<br />
*'''<big>[[Devices]]</big>'''<br />
**[[Device Discovery|<big>Device Discovery</big>]]<br />
**[[Device Detail|<big>Device Detail</big>]]<br />
**[[Device Events|<big>Device Events</big>]]<br />
*'''<big>[[Apps]]</big>''' <br />
**[[App Status|<big>App Status</big>]]<br />
**[[App Events|<big>App Events</big>]]<br />
*'''<big>[[Settings]]</big>'''<br />
**[[Hub Details|<big>Hub Details</big>]]<br />
**[[Hub Login Security|<big>Hub Login Security</big>]]<br />
**[[Location and Modes|<big>Location and Modes</big>]]<br />
**[[Z-Wave Details|<big>Z-Wave Details</big>]]<br />
**[[Zigbee Details|<big>Zigbee Details</big>]]<br />
***[[Zigbee Logs|<big>Zigbee Logs</big>]]<br />
**[[Check For Updates|<big>Check For Updates</big>]]<br />
**[[File Manager|<big>File Manager</big>]]<br />
**[[Backup and Restore|<big>Backup and Restore</big>]]<br />
**[[Discover Zigbee and Z-Wave Devices|<big>Discover Zigbee and Z-Wave Devices</big>]]<br />
**[[Hub Mesh|<big>Hub Mesh</big>]]<br />
**<big>[[Networking]]</big><br />
<br />
'''<big>Advanced Features</big>'''<br />
<br />
*[[Apps Code|<big>Apps Code</big>]]<br />
*[[Drivers Code|<big>Drivers Code</big>]]<br />
*[[System Events|<big>System Events</big>]]<br />
**[[Hub Events|<big>Hub Events</big>]]<br />
**[[Location Events|<big>Location Events</big>]]<br />
*<big>[[Logs]]</big><br />
**[[Past Logs|<big>Past Logs</big>]]<br />
*[[Hubitat Diagnostic Tool|<big>Hubitat Diagnostic Tool</big>]]<br />
*[[Soft Reset|<big>Soft Reset</big>]]<br />
<br />
==<big>App Documentation</big>==<br />
<br />
*[[Amazon Echo App|<big>Amazon Echo App</big>]]<br />
*[[Amazon Echo Skill|<big>Amazon Echo Skill</big>]]<br />
*<big>[[Basic Rules]]</big><br />
*<big>[[Button Controller]] 3.1</big><br />
*[[Device Firmware Updater|<big>Device Firmware Updater</big>]]<br />
*[[Ecobee Integration|<big>Ecobee Integration</big>]]<br />
*[[Google Home|<big>Google Home</big>]]<br />
*[[Groups and Scenes|<big>Groups and Scenes</big>]]<br />
*[[Hub Link|<big>Hub Link</big>]]<br />
*[[Hub Mesh|<big>Hub Mesh</big>]]<br />
*[[Hubitat® Dashboard|<big>Hubitat<sup>®</sup> Dashboard</big>]]<br />
*[[Hubitat® Safety Monitor|<big>Hubitat<sup>®</sup> Safety Monitor</big>]]<br />
*[[Hue Bridge Integration|<big>Hue Bridge Integration</big>]]<br />
*[[IFTTT Integration|<big>IFTTT Integration</big>]]<br />
*[[Life360 Connector|<big>Life360 Connector</big>]]<br />
*[[Link to Hub|<big>Link to Hub</big>]]<br />
*[[Lock Code Manager|<big>Lock Code Manager</big>]]<br />
*[[Lutron Integrator|<big>Lutron Integrator</big>]]<br />
*[[Maker API|<big>Maker API</big>]]<br />
*[[Mode Manager|<big>Mode Manager</big>]]<br />
*[[Motion and Mode Lighting Apps|<big>Motion and Mode Lighting Apps</big>]]<br />
*<big>[[Notifications]]</big><br />
*[[Rachio Integration|<big>Rachio Integration</big>]]<br />
*[[Rule Machine|<big>Rule Machine</big>]]<br />
*<big>[[Rule-5.0|Rule-5.0]]</big><br />
*[[Send Hub Events|<big>Send Hub Events</big>]]<br />
*[[Simple Automation Rules|<big>Simple Automation Rules</big>]]<br />
*<big>[[SharpTools]]</big><br />
*[[Sonos Integration|<big>Sonos Integration</big>]]<br />
*[[Thermostat Controller|<big>Thermostat Controller</big>]]<br />
*[[Zone Motion Controllers|<big>Zone Motion Controllers</big>]]<br />
*[[Z-Wave Poller|<big>Z-Wave Poller</big>]]<br />
<br />
==<big>Device Documentation</big>==<br />
<br />
*[[Orbit Hose Water Timer|<big>Orbit Hose Water Timer</big>]]<br />
<br />
*<big>[[Pushover]]</big><br />
<br />
*<big>[[SecurityKeypads]]</big><br />
<br />
*[[Twilio Notification|<big>Twilio Notification</big>]]<br />
<br />
==<big>Compatible Devices</big>==<br />
<br />
[[List of Compatible Devices|'''<big>List of Compatible Devices</big>''']]<br />
<br />
[[Join and Reset Instructions|<big>Join and Reset Instructions</big>]]<br />
<br />
==<big>How-to Guides</big>==<br />
<br />
[[Hub Placement Tips|<big>Hub Placement Tips</big>]]<br />
<br />
[[How to collect information for support|<big>How to collect information for support</big>]]<br />
<br />
[[How to cancel subscription services|<big>How to cancel subscription services</big>]]<br />
<br />
[[How to Build a Solid Zigbee Mesh|<big>How to Build a Solid Zigbee Mesh</big>]]<br />
<br />
[[How to Build a Solid Z-Wave Mesh|<big>How to Build a Solid Z-Wave™ Mesh</big>]]<br />
<br />
[[How to remove a Z-Wave device|<big>How to remove a Z-Wave™ device</big>]]<br />
<br />
[[The Anatomy of Z-Wave™ Repair|<big>The Anatomy of Z-Wave™ Repair</big>]]<br />
<br />
[[How to update your hub|<big>How to update your hub</big>]]<br />
<br />
[[How to backup your hub|<big>How to backup your hub</big>]]<br />
<br />
[[How to change your location|<big>How to change your location</big>]]<br />
<br />
[[How to add/change a mode|<big>How to add/change a mode</big>]]<br />
<br />
[[How to Install Custom Apps|<big>How to Install Custom Apps</big>]]<br />
<br />
[[How to Install Custom Drivers|<big>How to Install Custom Drivers</big>]]<br />
<br />
[[Hub Login Security|<big>How to add password protection</big>]]<br />
<br />
[[How to Manage Lock Codes|<big>How to Manage Lock Codes</big>]]<br />
<br />
<big>[[How to create new presence and push notification devices]]</big><br />
<br />
<big>[[How to setup mobile presence sensing]]</big><br />
<br />
[[How to manage accounts linked to your hub|<big>How to manage accounts linked to your hub</big>]]<br />
<br />
[[How to correct a Multi Admin error|<big>How to correct a Multi Admin error</big>]]<br />
<br />
[[How to disable Hub Login Security to recover access|<big>How to disable Hub Login Security to recover access</big>]]<br />
<br />
[[How to use Dashboard to Manage Lock Codes|<big>How to use Dashboard to Manage Lock Codes</big>]]<br />
<br />
==<big>Compliance Documentation</big>==<br />
<br />
[[Z-Wave Manual|'''<big>Z-Wave User Manual</big>''']]<br />
<br />
==<big>Developer Documentation</big>==<br />
<br />
[[Developer Documentation|<big>Developer Documentation</big>]]<br />
<br />
[[Driver Capability List|<big>Driver Capability List</big>]]<br />
<br />
==<big>Platform</big>==<br />
[[Release Notes|'''<big>Release Notes</big>''']]<br />
<br />
{{Top}}</div>Doughttps://docs.hubitat.com/index.php?title=Rule-5.0&diff=5163Rule-5.02021-07-13T18:25:10Z<p>Doug: </p>
<hr />
<div>{{Top}}<h1><big>Rule Machine<sup>®</sup> 5.0</big></h1><big>Rule-5.0 is the culmination of a journey in the transformation of the Rule Machine app. All at once, it simplifies and adds power, resulting in a fully generalized automation engine. The prior top-level organization of Rule Machine has been replaced with an optimized interface. The changes described below, explain how prior rules were created versus how it is accomplished with Rule-5.0. The former structure of Rules, Triggers, Triggered Rules, Actions and Schedules are now replaced with the definition of what causes a rule to run, and the resulting action. The former Button Controller app is now incorporated into Rule Machine, but with increased power and flexibility. New conditional logic capabilities are provided, allowing the most subtle or complex automations to be created. You simply define what causes the a rule to run, and then that you want it to do.</big><br />
===<big>Logic in a Rule-5.0 rule</big>===<br />
<big>In any Rule, the rule itself can be thought of as an overarching '''IF-THEN-ELSE''', where if the condition was '''True''' for the '''IF''' part or the rule, then '''Actions for True''' are run, and if they are '''False''', then '''Actions for False''' are run. In '''Rule-4.0''', this same logic can now simply be done with the '''Conditional Actions''' of '''IF-THEN and ELSE''' in the '''Actions''' section of a rule. As described in the next section, '''IF-THEN''' now has the same full logical expression capability previously available, with the addition of '''AND, OR, XOR, NOT''' logical operators, and nested parenthetical sub-expressions.</big><br />
<br />
*<big>'''Example:''' Using a Trigger Event such as a contact sensor '''Front Door *changed*''' to illustrate the difference, the previous Rule Machine version used this to interpret the '''Condition of Front Door *open*.''' The rule was evaluated whenever '''any''' event happened for the Front Door. In Rule-4.0, this is explicit, whereas in previous versions the rule was '''Front Door *open*''', we now make that event the Condition of an '''IF-THEN''' action. What were formerly '''Actions for True''', now become the Actions following '''IF-THEN''', and the former '''Actions for False''' become the actions following '''ELSE'''. Most Rules will now follow this basic format.</big><br />
<br />
===<big>Rule Triggers</big>===<br />
<big>All "Rules" in Rule-5.0 are in effect '''Triggered Rules'''. They each have a '''Trigger Event''', and then '''Conditional Actions'''. Instead of a rule with '''Actions for True''' and '''Actions for False''', they simply use conditional logic in the actions to create an equivalent '''IF-THEN-ELSE''' structure.</big><br />
===<big>Events</big>===<br />
<big>Each rule can have one or more '''Trigger Events''' that when triggered, cause the rule's actions to run.</big><p><big>Events are created by the devices or conditions in your system. Each device creates events appropriate to the type of device. A '''Trigger Event''' listens for specific events and when a trigger receives a selected event, it causes the defined '''Actions''' to run.</big></p><p><big>Rule Machine allows the following events in a Hubitat Elevation system to be acted upon. Each event results in a single test and the supported events and states that can be tested are listed below. For each event that refers to a device, one or more devices can be selected, and then the device state required for the '''Condition''' to be met can be selected. When multiple devices are selected, the Condition/Event may apply for '''ANY''' (default) or '''ALL''' of the devices.</big></p><pre>Acceleration: active / inactive<br />
Between two dates: starting month on this date / ending month on this date<br />
Battery: value<br />
Button: pressed / held / doubleTapped / released<br />
Button Device: select actions for any buttons of a button device<br />
Certain Time: at a certain time, including sunrise / sunset with offset<br />
Cloud End Point: hitting URL fires<br />
Contact: open / closed<br />
Custom attribute: device capability<br />
Days of Week: on certain days of the week<br />
Dimmer level: value<br />
Door: open, closed, opening, closing, unknown<br />
Energy meter: value<br />
Garage door: open, closed, opening, closing, unknown<br />
HSM alert: intrusion, intrusion-delay, intrusion-home, intrusion-home-delay, intrusion-night, cancelRuleAlerts, intrusion-night-delay, <br />
smoke, water, rule, arming, armingHome, armingNight, cancel<br />
HSM status: armed away, armed home, armed night, delayed arming home, delayed arming night, delayed arming away, disarmed, all disarmed<br />
Humidity: value<br />
Illuminance: value<br />
Last Event Device select device and attribute<br />
Local End Point: hitting URL fires<br />
Lock: locked / unlocked<br />
Mode: any of your hub's modes<br />
Motion: active / inactive<br />
Music player: playing, paused, stopped<br />
Periodic: allows periodic schedules for minutes, hourly, daily, weekly, monthly or yearly<br />
Physical dimmer level: value <br />
Physical switch: on / off<br />
Power meter: value<br />
Power source: mains / battery<br />
Presence: present / not present or arrives / leaves<br />
Private Boolean: true / false<br />
Rule paused: rule<br />
Smoke detector: clear, detected, tested<br />
Switch: on / off<br />
Temperature: value<br />
Thermostat cool setpoint: value<br />
Thermostat fan mode: value<br />
Thermostat heat setpoint: value<br />
Thermostat mode: heat / cool / auto / off / emergency heat<br />
Thermostat state: heating / cooling / fan only / idle / pending heat / pending cool<br />
Time of day: specific time / sunrise / sunset<br />
Variable: value<br />
Water sensor: dry / wet<br />
<br />
Note: value means compare current value to a number, to another device with an offset, or to a variable with an offset, or changed, increased, decreased</pre><br />
===<big>Actions</big>===<br />
<big>Actions are the portion of a rule that defines what the rule does when it is triggered to run.</big><br />
====<big>Actions as ordered script</big>====<br />
<big>As you define actions, you are creating a script of actions to perform when the rule runs. You may use as many actions as you want for each '''Action''' type and they can be run in whatever order you want. There is no predefined order of execution for Rule Machine actions, so you may arrange the order of actions any way you want. You can insert a new action anywhere in the list of actions, or at the end of the list.</big><br />
====<big>Actions can be modified</big>====<br />
<big>The Rule-5.0 user interface provides the ability to '''Edit''' and '''Delete''' any action you have defined, giving you complete control over your list of actions.</big> <br />
[[File:Rule-5.0 Edit and Delete Actions.png|none|thumb|600x600px]]<br />
<big>You may also '''Cut''' and then '''Paste''' actions if you need them to occur in a different order.</big><br />
<br />
# Select the action to cut.<br />
# Choose the new position for the action you just cut. The desired position could also be the end of the action list by choosing to paste the action before '''**End of Actions**''', which would paste the cut action at the end of the action list.[[File:Rule-5 cut action.png|none|thumb|600x600px]][[File:Rule-5.0 Paste Action Before v2.png|none|thumb|600x600px]][[File:Rule-5 action position after paste action.png|none|thumb|600x600px]]<br />
<br />
====<big>Delay Actions and Delay Actions per Mode</big>====<br />
<big>All actions can be delayed, effectively pausing the action execution for a specified amount of time. A</big><big>ctions</big> <big>may</big> <big>also be delayed for a period of time that is dependent on the current '''Mode''' by using '''Delay Actions Per Mode'''.</big><br />
<br />
<big>'''Delay per Action'''</big><br />
<br />
<big>Each action you define can have an optional delay. These delays can be defined with hours, minutes, and seconds. Seconds can have decimal fractions, allowing millisecond resolution. In a rule, delays can have the '''option to be cancelled''' in the event of a change of rule truth. It is important to realize that the delay assigned to an individual action affects only that action, and not subsequent actions. Any subsequent action is executed immediately after the delayed action starts its delay timer, and does not wait for that delay timer to run. When the delay timer expires, the delayed action is executed (unless the delay was cancelled).</big><br />
[[File:Rule Machine Delay per action.png|none|thumb|600x600px]]<br />
<big>'''Delay all Actions'''</big><br />
<br />
<big>It is also possible to delay all actions (also with optional cancel). The script of actions runs sequentially when the rule runs, with each action happening in order. Actions with delays start their timer, which can vary for each action, and '''<u>the next action in order</u>''' runs. By using '''Delay Actions''', the entire script can be ''paused'' by a delay.</big><br />
<br />
<big>'''Delay Actions per Mode'''</big><br />
<br />
<big>Delay Actions can also be specified on a per mode basis, so that the time the script is paused, varies according to the current mode.</big><br />
===<big>Rule-5.0 Conditional Actions and Logical Expressions</big>===<br />
<big>In Rule Machine, '''IF-THEN-ELSE-ENDIF''' conditional blocks can be nested. The user interface utilizes textual indentation to help guide you in keeping track of which '''IF-THEN-ELSE-ENDIF''' block you are currently adding actions to. The user is responsible for completing each level of nested '''IF-THEN''' blocks.</big><br />
<br />
<big>The condition of an '''IF-THEN''' or '''ELSE-IF''' Action can be a full logical expression built-up from individual conditions, and the logical operators '''AND''', '''OR''', '''XOR''', and '''NOT'''. Parenthesized sub-expressions are also possible. This is the same user interface of the former rule portion found in Rule or Triggered Rule from Rule-3.0. An individual '''Condition''' can be created ''on the fly'' while defining a logical expression. Every such '''Condition''' is kept in the list of available Conditions. This list of available conditions is present in the '''Define Actions''' page. The user interface then allows Creating, Editing and Deleting conditions. If a condition is edited, those changes will be reflected where it is used in an '''IF-THEN''' or '''ELSE-IF''' conditional action.</big><br />
<br />
<big>This combination of nested '''IF-THEN''' blocks and full logical expression for each '''IF-THEN''' and '''ELSE-IF''', allows creativity for rules in Rule-4.0 that is limited only by your imagination. To help you with complex logic structures, new actions are available.</big><br />
<br />
#<big>Exit Rule - With Exit Rule the execution of '''Actions''' for that rule will stop, irrespective of what order in the rule it exists.</big><br />
#<big>Pending Delays are not cancelled, and current Repetitions are not stopped by Exit Rule, but these can be managed separately if needed with '''Stop Repeating Actions''', '''Cancel Rule Timers''', and '''Cancel Delayed Actions''', where appropriate.</big><br />
<br />
====<big>Automatic Condition Creation</big>====<br />
<big>When '''Event Triggers''' are defined, corresponding conditions are created for most types. Some conditions, like '''Button''', '''Certain Time''', etc, do not have a ''state'' and so have no corresponding condition. These created conditions are available in the '''Define Actions''' page for use in '''Conditional Actions''', are available for use in other Actions, and can be edited.</big><br />
<br />
====<big>IF-THEN-ELSE</big>====<br />
<big>You can introduce conditional execution of actions using the following method.</big><br />
IF (condition) THEN <br />
some actions...<br />
ELSE-IF (condition) THEN <br />
some actions...<br />
ELSE <br />
some actions...<br />
END-IF <br />
<big>'''IF-THEN''' and '''ELSE-IF''' both accept a logical expression as described above and '''IF-THEN-ELSE''' may also be nested. If the expression on the '''IF''' portion is True, then those actions following '''IF''' and before any '''ELSE-IF''' or '''ELSE''' statements will be carried out. If the expression is False, then those actions are skipped, and the '''ELSE''' portion or '''ELSE-IF''' are carried out. In the case of '''ELSE-IF''', its expression will be tested, and the following Actions that follow it will either run or will not run, depending on the result of the evaluation. There can be as many '''ELSE-IF''' sections as you need, and the '''ELSE-IF''' and '''ELSE''' portions are both are optional. '''END-IF''' is also optional, and if omitted means all remaining actions are part of the preceding '''IF-THEN''', '''ELSE-IF''' or '''ELSE'''. However, for good rule structure, just a sentence should have a period at the end, it is strongly recommended that you use END-IF to complete an '''IF-THEN-ELSE''' as a regular practice.</big><br />
===<big>Repeat Actions</big>===<br />
<big>Portions of, or all of the script of an '''Action''' can be repeated periodically, but you must specify the time interval for the repetition. Be careful not to make this interval too short, as you can consume your hub CPU resources by repeating too quickly. You can select any number of iterations if desired, but some method to stop the repetition is required. When a '''Repeat Actions''' is introduced to the script, any action before '''END-REP''' will be repeated. Only the Actions between '''Repeat Actions''' and '''END-REP''' will be repeated. Actions following '''END-REP''' will run only once the repetition has stopped. There is an optional '''Stop for a Repeat Action''' choice and if selected, then '''Stop Repeating Actions''' will stop this repetition. Using '''Cancel Rule Timers''' from either the current rule or another rule, will stop '''<u>all Repeat Actions</u>''', irrespective of which Stop selection is used.</big><br />
Repeat Actions<br />
some actions...<br />
END-REP<br />
<big>A '''Repeat Actions''', like any action, can have a condition specified. If the condition is False, the '''Repeat Actions''' block will not be executed. If the condition becomes False during repetition, the repetition will be stopped (with the exception of when '''Repeat N Times''' is selected). This provides three features well known to computer programmers.</big><br />
<br />
#<big>While-loop - The '''while-loop''' runs only if the condition is true, and stops if it is false.</big><br />
#<big>For-loop - A '''for-loop''' runs for a fixed number of times, but if a condition exists, it will only start that iteration if the condition is true; The condition is not retested during iteration.</big><br />
#<big>Repeat-until loop - A repeat-until loop runs until a condition becomes true, running at least once.</big><br />
<br />
'''<big>Examples:</big>'''<br />
<br />
''<big>While loop - repeat while the condition is True:</big>''<br />
IF (condition) Repeat Actions<br />
some actions...<br />
END-REP<br />
''<big>For loop (repeat n times):</big>''<br />
Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Conditional For loop (repeat n times if condition is True):</big>''<br />
IF (condition) Repeat Actions n times<br />
some actions...<br />
END-REP<br />
''<big>Repeat-Until loop:</big>''<br />
Repeat Actions with Stop selected<br />
some actions<br />
IF (condition) Stop Repeating Actions<br />
END-REP<br />
<big>'''Repeat Actions''' cannot be nested. '''END-REP''' is optional, and if omitted, all actions after '''Repeat Actions''' will be repeated.</big><br />
<br />
*<big>'''Note''': The '''END-REP''' does not have anything to do with the when a '''Repeated Action''' will stop repeating, it merely marks the end of the list of actions to be repeated. If you use '''Repeat These Actions''' without specifying '''N Times''' (for loop), and without a '''Condition''' (while loop), and also without a '''Conditional Stop''' or a '''Stop on Truth Change''' (for rules only), that means it should repeat <u>forever</u>, and that is probably not what you want to have happen. In that case, some other rule would need to cause the repetition to stop.</big><br />
<br />
===<big>Wait for Events and Wait for Condition</big>===<br />
<big>'''Wait for Events''' pauses rule execution until some specified event occurs. Multiple events can be defined to cause the wait to end. In effect, this introduces another trigger-like capability into the Actions. There is also an event type specifically for '''Wait for Events''' named '''Elapsed Time'''. When the '''Elapsed Time''' expires, the wait will be over, irrespective of other events it may be waiting for.</big><br />
<br />
<big>'''Wait for Condition''' is similar to '''Wait for Events''', but instead a '''Condition''' is evaluated. If the condition is true, no wait occurs, otherwise the rule execution is paused until the condition is met. '''Wait for Events''' and '''Wait for Condition''' may both be used in a '''Simple Conditional Action'''. Additionally, both pending '''Wait for Events''' and '''Wait for Condition''' will be cancelled each time a rule is triggered, and can be also cancelled by another rule with '''Stop Rule Actions''', or by a '''Cancel Wait''' action (which presumably would have been part of a Delayed Action).</big><br />
===<big>Custom Actions</big>===<br />
<big>A Custom Action allows you to select a device, and send any of the commands that device supports along with parameters it may take. While the former Custom Commands need to be pre-defined and were available to all rules, a '''Custom Action''' is created within your actions and is specific to the rule where it is created.</big><br />
===<big>Run Actions from the Rule-5.0 User Interface</big>===<br />
<big>When you first create a new rule, you are creating a child app of the parent Rule Machine app, and therefor you must select '''Done''' on the main page to install the Rule-5.0 rule. If you re-open the rule, its actions can be run by hitting '''Run Actions''' button. If you change the '''Trigger Events''' in any way, you must either select '''Done''' or the '''Update Rule''' button.</big><br />
<br />
===<big>Rule Logging</big>===<br />
<big>You can select which types of logging you want to see in [https://docs.hubitat.com/index.php?title=Logs Logs]. This is a very good way to determine exactly what a rule is doing.</big><br />
===<big>List of Actions</big>===<br />
<pre> Conditional Actions <br />
IF (conditions) THEN<br />
ELSE-IF (conditions) THEN<br />
ELSE<br />
END-IF<br />
Simple Conditional Action<br />
Control Switches, Push Buttons <br />
Turn switches on<br />
Turn switches off<br />
Toggle switches<br />
Flash switches<br />
Set switches per mode<br />
Push a button<br />
Push a button per mode<br />
Set Dimmers and Bulbs <br />
Set dimmer level<br />
Toggle dimmer level<br />
Adjust dimmer level<br />
Set dimmer level per mode<br />
Fade dimmer level over time<br />
Stop dimmer fade<br />
Start raising dimmer level<br />
Start lowering dimmer level<br />
Stop changing dimmer level<br />
Set color and level<br />
Toggle color and level<br />
Set color and level per mode<br />
Set color temperature and level<br />
Toggle color temperature and level<br />
Set color temperature and level per mode<br />
Change color temperature over time<br />
Stop changing color temperature<br />
Activate Scenes, Adjust Shades or Fans <br />
Activate scenes<br />
Activate scenes per mode<br />
Open shades<br />
Close shades<br />
Set shade position<br />
Set fan speed<br />
Cycle fans<br />
Control HSM, Garage Doors, Locks or Valves <br />
Arm/Disarm Hubitat® Safety Monitor<br />
Open garage door<br />
Close garage door<br />
Lock locks<br />
Unlock locks<br />
Open valves<br />
Close valves<br />
Control Thermostats or Thermostat Scheduler <br />
Set thermostats<br />
Set Thermostat Scheduler<br />
Send, Speak, or Log a Message, Send HTTP Request <br />
Send or Speak a Message<br />
Log a Message<br />
Send HTTP Get<br />
Send HTTP Post<br />
Control Music Player, Volume, Sounds<br />
Control Music Player<br />
Set Volume<br />
Mute<br />
Unmute<br />
Sound Tone<br />
Sound Chime<br />
Control Siren<br />
Set Mode or Variables, Run Custom Action <br />
Set Mode<br />
Run Custom Action<br />
Write to local file<br />
Append to local file<br />
Delete local file<br />
Set Private Boolean, Run/Cancel/Pause Rules <br />
Set Private Booleans True<br />
Set Private Booleans False<br />
Run Rule Actions<br />
Cancel Rule Timers<br />
Pause Rules<br />
Resume Rules<br />
Capture/Restore, Device Refresh or Polling <br />
Capture Devices<br />
Restore Devices<br />
Refresh devices<br />
Poll devices<br />
Start Z-Wave poll on switches<br />
Stop Z-Wave poll on switches<br />
Start Z-Wave poll on dimmers<br />
Stop Z-Wave poll on dimmers<br />
Delay or Repeat Actions, Wait <br />
Delay Actions<br />
Delay Actions Per Mode<br />
Cancel Delayed Actions<br />
Repeat Actions<br />
END-REP<br />
Stop Repeating Actions<br />
Wait for Events<br />
Wait for Condition<br />
Cancel Wait<br />
Exit Rule<br />
Comment</pre><br />
<br />
===<big>Export, Import or Clone of Rule Machine Rules</big>===<br />
<big>Select this option to allow export of your Rule Machine rules for import to another hub, or to clone an existing rule as a base from which to start a new rule.</big><br />
[[File:Export Import and Clone RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/99/Export_Import_and_Clone_RM_rule_v2.png<br />
]]<br />
<br />
====<big>Export a Rule</big>====<br />
<br />
#<big>Select a single or multiple rules for '''Export'''. You may export multiple rules to a single file, and still have the option to select which rules to later '''Import'''.</big>[[File:Export Selected RM rules v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/00/Export_Selected_RM_rules_v2.png ]]<br />
#<big>Press the '''Download''' button to save the file to your local drive in the designated file download location for your browser. Typically this will be your '''Downloads''' folder.</big>[[File:Export RM rule v2.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/52/Export_RM_rule_v2.png ]]<br />
<br />
====<big>Restore or Import a Rule</big>====<br />
<big>You may choose to '''Restore''' a rule instead of using the '''Import''' option. This is most appropriate for instances where you want to bring a Rule Machine rule into your hub database, but you do not want to change the name or the devices used in the rule. If you instead choose to '''Import''', the process will pause to allow the rule to be renamed, and the devices used in the rule to be substituted with other devices installed on your hub before completing the import process.</big><br />
<br />
'''<big>Restore</big>'''<br />
<br />
#<big>To '''Restore''', select the saved file you previously exported, then press the '''Restore''' button.</big>[[File:Restore RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/6b/Restore_RM_rule.png ]]<br />
<br />
'''<big>Import</big>'''<br />
<br />
#<big>To '''Import''', select the saved file you previously exported and press the '''Import...''' button.</big>[[File:Import RM rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/c/c9/Import_RM_rule.png ]]<br />
#<big>Select the rules for import.</big>[[File:Selected RM rule for import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/16/Selected_RM_rule_for_import.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big><br />
#*<big>'''NOTE:''' If you '''Import''' a rule to another hub without selecting replacement devices, any existing devices with those same names will be used in the imported rule. If the devices do not exist, virtual devices with those same names will automatically be created. This is very helpful when you need to replace devices of an imported rule, but do not yet have the devices available that will replace them.</big>[[File:Rename and change RM devices before import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/da/Rename_and_change_RM_devices_before_import.png ]]<br />
#<big>When ready to import, press the '''Import ['''rule name''']''' button.</big>[[File:Rule Machine Import.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/1/1a/Rule_Machine_Import.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been imported.</big>[[File:RM Import confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/9/9c/RM_Import_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps.</big>[[File:Show imported Rule-5 rules.png|none|thumb|600x600px]]<br />
#*<big>'''<span style="color: red;;">IMPORTANT!</span>''' - If you import rules that contain a Private Boolean, it must be manually adjusted after importing the rule. In the following example, you will see that an imported rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]][[File:Imported rule with PB not pointing anywhere.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/d4/Imported_rule_with_PB_not_pointing_anywhere.png ]]<br />
<br />
====<big>Clone a Rule</big>====<br />
<br />
#<big>To '''Clone''' a rule, select the rule from the list of available Rule Machine rules on your hub and press the '''Clone''' button.</big>[[File:Select Rule Machine rule for clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/2/2d/Select_Rule_Machine_rule_for_clone.png ]][[File:Initiate Rule Machine cloning.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/6/68/Initiate_Rule_Machine_cloning.png ]]<br />
#<big>You will be prompted to replace the name and devices used in the rule if you need to.</big>[[File:Rename and change RM devices before clone.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/d/dd/Rename_and_change_RM_devices_before_clone.png ]]<br />
#<big>When ready to proceed, press the '''Clone ['''rule name''']''' button.</big>[[File:Clone Rule Machine rule.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/5/55/Clone_Rule_Machine_rule.png ]]<br />
#<big>You will receive a confirmation that the rule you selected has been cloned.</big>[[File:RM rule clone confirmation.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/46/RM_rule_clone_confirmation.png ]]<br />
#<big>If you changed the name, it will appear with the new name in your list of Rule Machine child apps. If you did not change the name, the rule will be imported under the same name, but it will have the word '''clone''' added to the end.</big>[[File:Show cloned Rule-5 rule.png|none|thumb|600x600px]]<br />
#*<big><span style="color: red;;">'''IMPORTANT!'''</span> If you '''Clone''' rules that contain a Private Boolean, it must be manually corrected after cloning the rule. In the following example, you will see that a cloned rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.</big>[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/0/0e/Cloning_or_imported_rules_containing_PB.png ]] [[File:Cloned rule with incorrect PB setting.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/48/Cloned_rule_with_incorrect_PB_setting.png ]]</div>Doughttps://docs.hubitat.com/index.php?title=File:Show_imported_Rule-5_rules.png&diff=5162File:Show imported Rule-5 rules.png2021-07-13T16:34:42Z<p>Doug: </p>
<hr />
<div>Show imported Rule-5 rules</div>Doughttps://docs.hubitat.com/index.php?title=File:Show_cloned_Rule-5_rule.png&diff=5161File:Show cloned Rule-5 rule.png2021-07-13T16:33:31Z<p>Doug: </p>
<hr />
<div>Show cloned Rule-5 rule</div>Doughttps://docs.hubitat.com/index.php?title=File:Rule_Machine_Delay_per_action.png&diff=5160File:Rule Machine Delay per action.png2021-07-13T16:11:02Z<p>Doug: </p>
<hr />
<div>Rule Machine Delay per action</div>Doughttps://docs.hubitat.com/index.php?title=File:Rule-5.0_Paste_Action_Before_v2.png&diff=5159File:Rule-5.0 Paste Action Before v2.png2021-07-13T15:52:08Z<p>Doug: </p>
<hr />
<div>Rule-5.0 Paste Action Before v2</div>Doughttps://docs.hubitat.com/index.php?title=File:Rule-5.0_Paste_Action_Before.png&diff=5158File:Rule-5.0 Paste Action Before.png2021-07-13T15:47:55Z<p>Doug: </p>
<hr />
<div>Rule-5.0 Paste Action Before</div>Doughttps://docs.hubitat.com/index.php?title=File:Rule-5_action_position_after_paste_action.png&diff=5157File:Rule-5 action position after paste action.png2021-07-13T15:47:03Z<p>Doug: </p>
<hr />
<div>Rule-5 action position after paste action</div>Doughttps://docs.hubitat.com/index.php?title=File:Rule-5_cut_action.png&diff=5156File:Rule-5 cut action.png2021-07-13T15:36:24Z<p>Doug: </p>
<hr />
<div>Rule-5 cut action</div>Doughttps://docs.hubitat.com/index.php?title=File:Rule-5.0_Edit_and_Delete_Actions.png&diff=5155File:Rule-5.0 Edit and Delete Actions.png2021-07-13T15:17:12Z<p>Doug: </p>
<hr />
<div>Rule-5.0 Edit and Delete Actions</div>Doughttps://docs.hubitat.com/index.php?title=Rule_Machine&diff=5154Rule Machine2021-07-13T14:39:34Z<p>Doug: </p>
<hr />
<div>{{Top}}<h3><big>Introduction to Automation</big></h3><br />
<br />
<big>A home automation system is a collection of smart devices and a Hubitat Elevation hub. The objective of the system is to provide automatic control of various devices in the home based on events and conditions. This introduction explains the structure of the system and the way that it operates. Understanding these concepts is essential to being able to design your own home automation system.</big><br />
<br />
<h4><big>Events</big></h4><br />
<br />
<big>An automation system is "event driven". The devices in your home automation system regularly generate events. An '''event''' is simply a small message that a device or the hub sends out.</big> <br />
<br />
*<big>'''Example''': When you turn on a smart switch, it sends out an event reporting that it was turned on. One way to think of the automation system is that there is a constant stream of '''events'''. The role of the hub is to make sense out of this stream of events and to make actions happen in the system.</big><br />
<br />
====<big>Automations</big>====<br />
<big>An "automation" is a very small computer program which responds to events, and results in something happening.</big><br />
<br />
*<big>'''Example''': An automation could respond to the event of a door contact opening by turning on a porch light. These '''automations''' (e.g. Rules), make up the brains of the home automation system, delivering the "Smart" of a Smart Home.</big><br />
<br />
<big>Of all of the events occurring in the system, each '''automation''' is only interested in a few specific events. To avoid having to process every single event, each automation "subscribes" to the ones it is interested in. In our previous example of the porch light, an automation subscribes to the events from the door contact sensor, and ignores all other events in the system. Its single job is to turn on a light when that contact opens. Each automation in a system has subscriptions to the events it is concerned with. The job of the hub is to send each automation, only the events that it for which it has subscribed.</big><br />
<br />
'''<big>Event types</big>'''<br />
<br />
<big>There are four basic event types:</big><br />
<br />
#<big>Device events</big><br />
#*<big>Devices events are generated by the smart devices in the system, like the door contact sensor reporting 'open'.</big><br />
#<big>Time events</big><br />
#*<big>Time events are generated by a scheduler in the hub for things like sunrise, 5:00 PM, etc.</big><br />
#<big>Hub events</big><br />
#*<big>Hub events are special events that the hub generates</big><br />
#**<big>'''Example''': The hub generates an event when it starts up.</big><br />
#<big>Network events</big><br />
#*<big>Network events are messages that come to the hub from the LAN or internet. Some devices use the LAN to send events, some use Z-Wave or Zigbee radio signals.</big><br />
<br />
<big>For every device event or network event to be processed so that an automation can respond to it, there must be a "driver" in the system.</big><br />
<br />
*<big>'''Example''': A driver would receive a message from the Zigbee radio network sent by the door contact, and convert it into an event. Each smart device in the system has a corresponding driver installed in the hub. The hub serves as the traffic cop, forwarding device '''events''' to '''automations'''.</big><br />
<br />
====<big>Components of an Automation</big>====<br />
<big>As explained above, an '''automation''' is a small app that runs on the hub. Its purpose is to respond to events by causing actions.</big> <br />
<br />
<big>Every automation has two elements:</big> <br />
<br />
#<big>The events that provoke it to act.</big><br />
#<big>The actions it performs as a result.</big><br />
<br />
<big>Some automations are very simple. The one described where opening a door causes a light to turn on is very simple, but you may want or need it to be more sophisticated. Suppose you only want the porch light to turn on when the door opens at night, but not during the day. To accomplish this, the automation will need more than just the events and the actions, so it will need to evaluate '''Conditions'''. Based on this evaluation of conditions, it may or may not perform an action, or it could perform different actions depending on the conditions that are evaluated. Expanding on the porch light automation example, you could have the '''Rule''' also test what the time is, and the result from that additional evaluation of the '''Time event''' would determine if the light should turn on when the contact sensor is opened.</big> <br />
<br />
<big>You should now have a complete picture of what an automation is all about, with the understanding that all automations have this general form.</big><br />
<br />
*<big>An automation responds to '''Events'''</big><br />
*<big>Evaluates '''Conditions'''</big><br />
*<big>Performs '''Actions''' based on the '''Conditions'''.</big><br />
<h3><big>Rule Machine</big></h3><br />
<br />
<big>Rule-5.0 is a built-in app in Hubitat Elevation that can be used to create automations. Each rule created with Rule Machine has the described form.</big><br />
<br />
*'''<big>Trigger Events</big>'''<br />
*<big>'''Actions -''' Actions may have '''Conditions''' to be evaluated as a step in determining what the automation does.</big><br />
<h3><big>Rule Machine API</big></h3><br />
<br />
<big>It is possible for other apps to use '''Rules''', '''Triggers''', and '''Actions''' defined in Rule Machine. This is very similar, and uses the same mechanism, as actions in Rule Machine that affect other rules. It is also possible to use Rules, Triggers, and Actions from an HTTP request to an endpoint.</big><br />
<br />
<h3><big>Using Rule Machine from within other apps</big></h3><br />
<br />
<big>First, import the RM helper class into your app.</big><br />
<br />
<code><big>'import hubitat.helper.RMUtils'</big></code><br />
<br />
====<big>The List of Rules</big>====<br />
<big>Rule Machine maintains a list of available Rules, Triggers, Triggered Rules, and Actions. That list can be obtained with this method call.</big><br />
<br />
<big>def rules = RMUtils.getRuleList()</big><br />
<br />
<big>In this example, the resulting list of the variable '''rules''', can be used as an input to an "enum" as the options.</big><br />
<br />
====<big>Supported Actions</big>====<br />
<big>It is possible to set the '''Private Boolean''', evaluate a rule, run the rule actions, or stop running rule actions (either delayed or repeating). This is accomplished by sending an action request to Rule Machine, with each take the following form.</big><br />
<br />
<big>def RMUtils.sendAction(rules, action, appLabel)</big><br />
<br />
<pre> Set Private Boolean True: <br />
action "setRuleBooleanTrue"<br />
<br />
Set Private Boolean False: <br />
action "setRuleBooleanFalse"<br />
<br />
Evaluate Rule:<br />
action "runRule"<br />
<br />
Run Rule Actions:<br />
action "runRuleAct"<br />
<br />
Stop Rule Actions:<br />
action "stopRuleAct"<br />
<br />
Pause Rule:<br />
action "pauseRule"<br />
<br />
Resume Rule:<br />
action "resumeRule"<br />
</pre><br />
<big>In each case above, a list of '''Rules''' selected by input is sent. The rule options come from the variable to which they were input as described above, in the options section of the input.</big><br />
<br />
<big>The '''appLabel''' parameter is passed and will appear in the log entry that the rule makes when it performs the action commanded. Typically, simply pass `app.label`, for the name of the app that is causing the action. This has no function, other than logging.</big><br />
<br />
<big>'''Example''':</big><br />
<br />
def rules = RMUtils.getRuleList()<br />
input "theseRules", "enum", title: "Select which rules to stop", options: rules<br />
RMUtils.sendAction(theseRules, "stopRuleAct", app.label)<br />
<br />
<h3><big>Using Rule Machine from HTTP requests</big></h3><br />
<br />
<big>It is also possible to cause Rule Machine to perform these same actions from an HTTP request. To accomplish this, you would create a '''Trigger''' with either a Local End Point or Cloud End Point. The endpoint URL given by Rule Machine has the following form.</big><br />
<br />
<big>`http://192.168.0.36/apps/api/10249/trigger?access_token=ecd95469-bbcd-4889-a694-9b05ef80f4db`</big><br />
<br />
<big>To run rule actions the above URL must be modified to include the list of rules and the action. The modification takes the following form.</big><br />
<br />
<code><big>`/action=rule1&rule2&rule3`</big></code><br />
<br />
<big>Where action is the action from the list above and <code>`rule1&rule2&rule3`</code> are the '''appIds''' of the rules to run, separated by ampersands.</big> <br />
<br />
<big>This parameter is inserted in the endpoint URL just before the '''?''' that precedes the access_token as follows.</big><br />
<br />
<big>`http://192.168.0.36/apps/api/10249/trigger/stopRuleAct=943&956&10217?access_token=ecd95469-bbcd-4889-a694-9b05ef80f4db`</big><br />
<br />
<big>This example would do the same thing as the code example above, where '''943&956&10217''' are the appIds that were selected by consequence of the input for '''theseRules''', and '''stopRuleAct''' is the action to perform.</big><br />
<br />
<big>The '''appIds''' are the values selected by the input described above. For example, <code>`theseRules`</code>. The appIds can also be found for a rule by opening the rule and observing its appId in its URL as follows.</big><br />
<br />
<big>`http://192.168.0.36/installedapp/configure/10249/mainPage`</big><br />
<br />
<big>The '''appId''' for that rule would be '''10249.'''</big><br />
<br />
====<big>Get Rule List</big>====<br />
<big>To get the list of rules as returned from <code>`getRuleList()`</code> , use the following insert for the URL.</big><br />
<br />
<code><big>`/getRuleList`</big></code><br />
<br />
<big>Here's an example of how you would use a full URL.</big><br />
<br />
<big>`http://192.168.0.36/apps/api/10249/trigger/getRuleList?access_token=ecd95469-bbcd-4889-a694-9b05ef80f4db`</big><br />
<br />
<big>This returns a JSON object with appId and rule name pairs. The other requests return a JSON object with a human readable description of what was done.</big><br />
<br />
<h3><big>Dedication</big></h3><br />
<br />
<p><big>Rule Machine is dedicated to [[wikipedia:Alan_Turing|Alan Turing]]. He gave us the concept of an abstract machine that could compute, and from that we built small implementations of his vision. Today, we all use them every day of our lives.</big></p><br />
__FORCETOC__</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%E2%84%A2_Simple_Lighting_v1&diff=5153Hubitat™ Simple Lighting v12021-06-25T19:31:01Z<p>Doug: Redirected page to Simple Automation Rules</p>
<hr />
<div>#REDIRECT [[Simple Automation Rules]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%E2%84%A2_Simple_Lighting_2&diff=5152Hubitat™ Simple Lighting 22021-06-25T19:30:03Z<p>Doug: Redirected page to Simple Automation Rules</p>
<hr />
<div>#REDIRECT [[Simple Automation Rules]]</div>Doughttps://docs.hubitat.com/index.php?title=Simple_Lighting_Rule&diff=5151Simple Lighting Rule2021-06-25T19:29:11Z<p>Doug: Redirected page to Simple Automation Rules</p>
<hr />
<div>#REDIRECT [[Simple Automation Rules]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Simple_Lighting&diff=5150Hubitat Simple Lighting2021-06-25T19:28:29Z<p>Doug: Redirected page to Simple Automation Rules</p>
<hr />
<div>#REDIRECT [[Simple Automation Rules]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%C2%AE_Simple_Lighting&diff=5149Hubitat® Simple Lighting2021-06-25T19:27:40Z<p>Doug: Redirected page to Simple Automation Rules</p>
<hr />
<div>#REDIRECT [[Simple Automation Rules]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%C2%AE_Simple_Lighting&diff=5148Hubitat® Simple Lighting2021-06-25T19:26:25Z<p>Doug: </p>
<hr />
<div>#REDIRECT [<nowiki/>[[Simple Automation Rules|true]]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%C2%AE_Simple_Lighting&diff=5147Hubitat® Simple Lighting2021-06-25T19:25:10Z<p>Doug: </p>
<hr />
<div>#REDIRECT [<nowiki/>[[Simple Automation Rules|Automation Rules|true]]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Simple_Lighting&diff=5146Hubitat Simple Lighting2021-06-25T19:21:15Z<p>Doug: Removed redirect to Https://docs.hubitat.com/index.php?title=Simple Automation Rules</p>
<hr />
<div>#REDIRECT [<nowiki/>[[Simple Automation Rules|Automation Rules|true]]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Simple_Lighting&diff=5145Hubitat Simple Lighting2021-06-25T19:20:14Z<p>Doug: Redirected page to Https://docs.hubitat.com/index.php?title=Simple Automation Rules</p>
<hr />
<div>#REDIRECT [[https://docs.hubitat.com/index.php?title=Simple Automation Rules]]</div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%E2%84%A2_Simple_Lighting_v1&diff=5144Hubitat™ Simple Lighting v12021-06-25T19:15:29Z<p>Doug: Blanked the page</p>
<hr />
<div></div>Doughttps://docs.hubitat.com/index.php?title=Hubitat%E2%84%A2_Simple_Lighting_2&diff=5143Hubitat™ Simple Lighting 22021-06-25T19:15:05Z<p>Doug: Blanked the page</p>
<hr />
<div></div>Doughttps://docs.hubitat.com/index.php?title=Hubitat_Simple_Lighting&diff=5142Hubitat Simple Lighting2021-06-25T19:14:26Z<p>Doug: Blanked the page</p>
<hr />
<div></div>Doug