|
|
| (4 intermediate revisions by one other user not shown) |
| Line 1: |
Line 1: |
| − | Location Events is where you will find detailed information about the location specific events such as sunrise and sunset times, Hubitat™ Safety Monitor events, and Mode changes.
| |
| | | | |
| − | *'''Name''' (A) is the event type. (i.e. '''sunsetTime''', '''hsmStatus''', and '''mode''').
| + | <big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big> |
| − | *'''Description''' (B) shows what event has occurred. For example, if you created a Hubitat™ Safety Monitor custom monitoring rule named '''Monitor Only''', it would display along with its current state (e.g. '''Armed''' or '''Disarmed''').
| + | |
| − | *'''Value''' (C) shows a unique identifier for the location event type that occurred. Two examples of this would be '''disarm''' or '''water''' Hubitat™ Safety Monitor events.
| + | <big> |
| − | *'''Event Type''' (D) shows information about the event type. (i.e. '''LOCATION_MODE_CHANGE''').
| + | This document is available at: http://docs2.hubitat.com/en/user-interface/advanced-features/location-events |
| − | *'''Date''' (E) is a detail time and date stamp of when the event occurred. This time and date stamp together with the event type can be very helpful information in determining when an event occurred, such as the Arming or Disarming of Hubitat™ Safety Monitor, or an emergency event such as a water leak.
| + | </big> |
Latest revision as of 19:44, 25 September 2022
