Z-Wave Information
Managing your Z-Wave devices properly is very important to maintaining a solid hub. Much of that management is done here on the Z-Wave Information page.
Z-Wave Information
- Z-Wave Exclude (A) - Click here if you need to remove a Z-Wave device. You MUST run this exclude process to remove the device from your system to prevent errors and allow the device to be used on a different hub.
- Repair Z-Wave (B) - Click here whenever you add a new Z-Wave device to improve the strength of your Z-Wave mesh.
- Z-Wave Status (C) - Use the dropdown menu to enable or disable the Z-Wave radio. When you have selected the status you want, click update.
Z-Wave Radio Devices (D)
Here you will see a list of your Z-Wave devices with information about them. Cluster indicates the routes used to send the Z-Wave signal to the hub. You can also see the date/time that a signal was last sent to the device (E) and when the last signal was received from the device (F).
