SecurityKeypads

Features

• One button Arm Away (On), driver option "Verify pin on arm away" requires valid pin to arm.
• One button Arm Home (Partial), driver option "Verify pin on arm home" requires valid pin to arm.
• Panic
• Motion Sensor

HE Driver

• Iris V2 Keypad

Operation

• Arm Away, On, or pin code + On
• Arm Home, Partial, or pin code + Partial
• Disarm, pin code + Off

---

Features

• One button Arm Away (On)
• One button Arm Home (Partial)
• Panic
• Motion Sensor

HE Driver

• Iris V3 Keypad

Operation

• Arm Away, On
• Arm Home, Partial
• Disarm, pin code + Off

---

Features

• 3 arming modes (left to right), Arm Home, Arm Away and Arm Night
• Motion Sensor

HE Driver

• CentraLite Keypad

Operation

• Arm Home, pin code + Arm Home
• Arm Away, pin code + Arm Away
• Arm Night, pin code + Arm Night
• Disarm, pin code

---

Features

• 3 arming modes (left to right), Arm Home, Arm Away and Arm Night

HE Driver

• CentraLite Keypad

Operation

• Arm Home, pin code + Arm Home
• Arm Away, pin code + Arm Away
• Arm Night, pin code + Arm Night
• Disarm, pin code

---

General Notes

All pin codes are 4 numeric characters, no other lengths will be accepted by the driver.

Pin codes can be entered via driver details or via Hubitat Elevation^® Lock Code Manager

• To enter via driver details using the "Set Code" command
  • Enter an unused code position
  • Enter an unused pin code
  • Enter a common name for this pin code
  • Click "Set Code", the resulting code if accepted will be visible in Current States, lockCodes

• To edit an existing code via driver details using the "Set Code" command
  • Enter the code position you wish to edit
  • Enter the existing or new pin
  • Enter the existing, or new name
  • Click "Set Code", any changes will be applied
• If you have difficulty with discovering a keypad, perform a factory reset following the steps below
  • Remove all batteries
  • While holding the tamper switch down (tamper is under the wall bracket), insert one battery (Iris V2 and CentraLite), or four batteries (Iris V3), release tamper after two seconds.
  • Insert remaining batteries if any, then start discover devices.