Release Notes 2.2.3

Hubitat Elevation Platform update 2.2.3 is now available:

Please note, the process takes about a minute to download (depending on your Internet connection) and extract the hub update, and 1-2 minutes to perform the update after you click 'Update Hub'. We recommend that you periodically download a backup of your setup from the Settings page, Backup and Restore.

Changes from 2.2.2:

Drivers and Devices

• New drivers:
  • Fibaro Smart Implant
  • HomeSeer Fan Controller FC200+
  • Inovelli Fan/Light Switch LZW-36
  • Inovelli 4-in-1 Sensor
  • Ring Alarm Hardwired Retrofit Kit (C-7 Required)
  • Generic Component Drivers
    • Generic Component Fan Control
    • Generic Component Humidity Sensor
    • Generic Component Voltage Sensor
• New compatible devices
  • EVA LOGIK Outdoor Plug (ZW96) using EVA LOGIK Smart Plug
  • Samotech MS104Z using Generic Zigbee Switch
  • Heiman Z-Wave smoke detector using Generic Z-Wave smoke detector.
• New driver features
  • Inovelli Multi-White Bulb (LZW-41): Performance updates when using firmware version 2.27+.
  • Added firmware version report to Alfred Lock driver

New App Features

• Amazon Echo Skill App
  • Added support for garage door controllers.
  • Added support for fan controllers.
  • Added support for shade controllers..
  • Rule-4.0: Allows selection of format for %time% and %now% (one option per rule).

Bug Fixes

• Fixed a bug in the Aeotec water sensor 6 driver that was preventing saving of configurations when the device was on battery.
• Fixed multiple drivers incorrect formatting of firmware version numbers.
• Button Controller 3.1: Fixed bug with Adjust Dimmer
• Generic Z-Wave Smoke/CO Detector: Change event value from test to tested.
• Zooz Double Switch: Remove extra logging.
• Rule-4.0: Fixed multiple device trigger bug.
• August Pro Lock: Add C7/S2 support.
• Fixed multiple driver compatibility issues with S2/S0.
• Leviton VRSC4 Z-Wave Controller: Fix Null error with child dimmers on startup
• Fix groovy.lang.MissingMethodException for SupervisionGet on Zooz drivers.
• C-7: Fixed Z-Wave repair behavior with sleepy devices.
• C-7: Fixed Z-Wave inclusion issues.
• C-7: Fixed occasional repair lock-up.

Platform Changes

• Performance and stability enhancements.
• C-7: Added update mechanism for Z-Wave radio firmware.
• C-7: Updated Z-Wave settings page to include node routes / speed and highest security grant.
• Add universal Z-Wave security encapsulation commands, automatically detects correct security encapsulation requirements of none, S0, S2_UNAUTHENTICATED, S2_AUTHENTICATED or S2_ACCESS_CONTROL. ([example](https://github.com/hubitat/HubitatPublic/blob/master/examples/drivers/genericZWaveCentralSceneDimmer.groovy))
  • Signatures:
    • String zwaveSecureEncap(String cmd)
    • String zwaveSecureEncap(hubitat.zwave.Command cmd)
• Change Zigbee EZSP_CONFIG_PAN_ID_CONFLICT_REPORT_THRESHOLD from 1 to 10

Important Please Read

C-7 hubs are receiving major Z-Wave updates with this release and require some user intervention to complete the process.

Part 1 of the update will happen automatically during startup. There may be an automatic reboot during first startup on 2.2.3.

Part 2 requires user intervention. Under settings and z-wave details you will see a new button "Firmware Update". This will start the radio firmware update.

Please note that the firmware update takes roughly 10 minutes to complete, please let this process complete fully before attempting to do anything. If you run into trouble please reach out on the community, we will be watching for people posting problems.

Once this is complete it is recommend going through and removing any failed nodes from previous inclusion issues.