Difference between revisions of "Network Setup"

From Hubitat Documentation
Jump to: navigation, search
(Replaced content with "<big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big> <big> This document is available at: http://docs2.hubitat.com/en/user-i...")
(Tag: Replaced)
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Top}}
+
<big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big>
  
<big>The '''Networking''' settings allow you to switch between '''DHCP''' (Dynamic Host Configuration Protocol) for automatic setting of your hub IP address, or '''Static IP''' where you can define the IP address for your hub when connected by Ethernet cable. You can also add a compatible WiFi dongle to allow your hub to join a WiFi network without the need to attach an Ethernet cable.</big>
+
<big>
 
+
This document is available at: http://docs2.hubitat.com/en/user-interface/settings/networking
'''<big>NOTE:</big>'''
+
</big>
 
 
*<big>WiFi dongles are '''not included''' with Hubitat Elevation. For maximum reliability, connect Hubitat Elevation to your network with an Ethernet cable whenever possible.</big>
 
*<big>'''Static IP/DHCP''' configuration is for use with the ''built-in Ethernet port only''. '''WiFi USB adapters will always use DHCP'''.</big>
 
*<big>Setting a '''Static IP address''' and configuring a '''WiFi USB adapter''' is not available for hubs prior to '''Model C-5'''.</big>
 
 
 
===<big>Static IP/DHCP configuration</big>===
 
 
 
====<big>Static IP address</big>====
 
 
 
#<big>Enter the desired non-routable IP address for your hub to use. The first three octets must match the other devices on your network, but the fourth octet can be any available number on your network. Use the '''Command shell''' tool on Windows (Type '''cmd''' into Windows search), or the '''Terminal''' app on MacOS (Located in the ''Applications'' > ''Utilities'' folder) to ping the IP address you wish to use, ensuring that there is no response from another device on your network before setting your hub to that IP address.</big>[[File:Static IP address entry.jpg|none|thumb|614x614px|link=https://docs.hubitat.com/images/d/d8/Static_IP_address_entry.jpg
 
]]
 
#<big>Press '''Save and switch to static IP'''. Ensure the first three octets are the same for the '''IP address''' and '''Default gateway''' in accordance with your router IP address settings (i.e. 192.168.0.x).</big>[[File:Static IP values entered.jpg|none|thumb|604x604px|link=https://docs.hubitat.com/images/e/eb/Static_IP_values_entered.jpg
 
]]
 
#'''<big>You must [[Settings|Reboot]] the Hub for the setting to take effect.</big>'''[[File:Reboot after changing static-DHCP.jpg|none|thumb|628x628px|link=https://docs.hubitat.com/images/f/f1/Reboot_after_changing_static-DHCP.jpg
 
]]
 
 
 
====<big>DCHP address</big>====
 
 
 
#<big>To change back to DHCP and let the router assign an IP address to your hub via its MAC Address, press the '''Switch to DHCP now''' button and [[Settings|reboot]] the hub.</big>
 
#*<big>'''NOTE''': Any time you switch between '''Static IP''' and '''DHCP''', you must [[Settings|reboot]] the hub or the setting will not take effect.</big>[[File:Switch back to DHCP.jpg|none|thumb|600x600px|link=https://docs.hubitat.com/images/a/a4/Switch_back_to_DHCP.jpg
 
]]
 
#<big>If you are accidentally blocked from accessing your hub due to an incorrect or unknown IP address setting, turn the hub over and use the point of a pen to press the small button just beneath the surface of the hub casing for at least '''7 seconds'''.</big>[[File:Hub DHCP reset button.png|none|thumb|255x255px|link=https://docs.hubitat.com/images/1/16/Hub_DHCP_reset_button.png
 
]]
 
#*
 
 
 
===<big>WiFi Adapter setup</big>===
 
 
 
#<big>Follow the instructions to add a compatible WiFi adapter to your hub. Connecting a USB device to your Hubitat hub requires a special OTG + power cable. This type of adapter cable feeds power to the hub while simultaneously providing a USB data connection for USB devices.</big>[[File:OTG + power cable.png|none|thumb|347x347px|link=https://docs.hubitat.com/images/6/66/OTG_%2B_power_cable.png
 
]]
 
#<big>Press the Install WiFI driver button and ensure the installation succeeded before continuing.</big>[[File:WiFi adapter setup.png|none|thumb|600x600px|link=https://docs.hubitat.com/images/4/4c/WiFi_adapter_setup.png
 
]]
 
#<big>Enter the network name (SSID) of the WiFi network you want your hub to join and then enter the WiFi password.</big>
 
#<big>Press the '''Save WiFi configuration''' button and [[Settings|'''reboot''']] the hub.</big>
 
#*<big>'''NOTE:''' You must [[Settings|'''reboot''']] the hub to activate your WiFi adapter and connect it to your WiFi network.</big>[[File:Enter WiFi username and password.jpg|none|thumb|644x644px|link=https://docs.hubitat.com/images/0/0f/Enter_WiFi_username_and_password.jpg]]
 
 
 
'''<span style="color: red;;"><big>IMPORTANT !</big></span>'''
 
 
 
*<big>You must [[Settings|reboot]] the hub or the setting will not take effect.</big>
 
*<big>WiFi dongles are '''not included''' with Hubitat Elevation. For maximum reliability, connect the hub to your network with an Ethernet cable whenever possible.</big>
 
*<big>'''Static IP/DHCP''' configuration is for use with the built in Ethernet port only. '''WiFi USB adapters always use DHCP'''.</big>
 
*<big>'''WiFi USB adapter''' configuration is not available for hubs prior to '''Model C-7'''.</big>
 
 
 
===<big>Changing connection from WiFi to Ethernet</big>===
 
<big>If you have configured a WiFi adapter and want to restore hub connection via Ethernet, do not simply pull the WiFi adapter from your hub.</big>
 
 
 
#<big>[[Settings|'''Shutdown''']] the hub.</big>
 
#<big>Disconnect your WiFi adapter (and the special OTG + power cable if desired).</big>
 
#<big>Plug in an Ethernet cable, connecting the hub to your router or network switch.</big>
 
#<big>Unplug your hub from its power source for a '''minimum of 30 seconds''' before plugging it back in.</big>
 
#*<big>'''NOTE''': To avoid stressing the micro USB connection, it is recommended that power be removed from the hub by unplugging the power adapter from the outlet instead of the hub.</big>
 
 
 
__NOINDEX__
 

Latest revision as of 19:49, 25 September 2022

We're moving! Please visit http://docs2.hubitat.com for the latest documentation.

This document is available at: http://docs2.hubitat.com/en/user-interface/settings/networking