Difference between revisions of "Soft Reset"

From Hubitat Documentation
Jump to: navigation, search
(Replaced content with " <big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big> <big> This document is available at: http://docs2.hubitat.com/en/user-...")
(Tag: Replaced)
 
(24 intermediate revisions by 4 users not shown)
Line 1: Line 1:
# Navigate to http://[Your Hub IP]:8081/ and you will see the Hubitat Diagnostic Tool main page. (Replace [Your Hub IP] with the ip address of your hub)
+
 
# Click on "Soft Reset"
+
<big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big>
# You will be prompted to log in. The password is the MAC address which is printed on a sticker on the bottom of your hub.
+
 
# The Soft Rest page will open and you will need to type "soft reset" into the input box and then click the "Soft Reset" button
+
<big>
# Once the soft reset has completed, the hub will restart and you will automatically be redirected to the setup page.
+
This document is available at: http://docs2.hubitat.com/en/user-interface/advanced-features/soft-reset
# (Optional) If you would like to restore from a backup, There will be a link at the bottom of the "Get started" page that says "Restore from Backup?" click that link and follow the directions to restore a previous backup from the hub or one of the backups you have downloaded previously.
+
</big>

Latest revision as of 20:20, 25 September 2022

We're moving! Please visit http://docs2.hubitat.com for the latest documentation.

This document is available at: http://docs2.hubitat.com/en/user-interface/advanced-features/soft-reset