Soft Reset

From Hubitat Documentation
Revision as of 16:36, 18 July 2019 by Cschwer (talk | contribs)
Jump to: navigation, search
  1. Navigate to http://[Your Hub IP]:8081/ and you will see the Hubitat Diagnostic Tool main page. (Replace [Your Hub IP] with the ip address of your hub)
  2. Click on "Soft Reset"
  3. You will be prompted to log in. The password is the MAC address which is printed on a sticker on the bottom of your hub.
  4. The Soft Rest page will open and you will need to type "soft reset" into the input box and then click the "Soft Reset" button
  5. Once the soft reset has completed, the hub will restart and you will automatically be redirected to the setup page.
  6. (Optional) If you would like to restore from a backup, There will be a link at the bottom of the "Get started" page that says "Restore from Backup?" click that link and follow the directions to restore a previous backup from the hub or one of the backups you have downloaded previously.