Z-Wave Information

From Hubitat Documentation
Revision as of 04:38, 15 September 2018 by Hubipete (talk | contribs) (Created page with "Managing your Z-Wave devices properly is very important to maintaining a solid hub. Much of that management is done here on the Z-Wave Information page. '''Z-Wave Informati...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Managing your Z-Wave devices properly is very important to maintaining a solid hub. Much of that management is done here on the Z-Wave Information page.


Z-Wave Information

  • Z-Wave Exclude (A) - Click here if you need to remove a Z-Wave device. You MUST run this exclude process to remove the device from your system to prevent errors and allow the device to be used on a different hub.
  • Repair Z-Wave (B) - Click here whenever you add a new Z-Wave device to improve the strength of your Z-Wave mesh.
  • Z-Wave Status (C) - Use the dropdown menu to enable or disable the Z-Wave radio. When you have selected the status you want, click update.

Z-Wave Radio Devices (D)

Here you will see a list of your Z-Wave devices with information about them. Cluster indicates the routes used to send the Z-Wave signal to the hub. You can also see the date/time that a signal was last sent to the device (E) and when the last signal was received from the device (F).