Difference between revisions of "Rule-5.0"

From Hubitat Documentation
Jump to: navigation, search
(Replaced content with " <big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big> <big> This document is available at: http://docs2.hubitat.com/en/apps/...")
(Tag: Replaced)
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<h1>Rule Machine<sup>®</sup> 4.0</h1>Rule-4.0 is the culmination of a journey in the transformation of the Rule Machine<sup>®</sup> app. All at once, it simplifies and adds power, resulting in a fully generalized automation engine. The prior top-level organization of Rule Machine has been replaced with an optimized interface. The changes described below, explain how prior rules were created versus how it is accomplished with Rule-4.0. The former structure of Rules, Triggers, Triggered Rules, Actions and Schedules are now replaced with the definition of what causes a rule to run, and the resulting action. The former Button Controller app is now incorporated into Rule Machine, but with increased power and flexibility. New conditional logic capabilities are provided, allowing the most subtle or complex automations to be created. You simply define what causes the a rule to run, and then that you want it to do.
 
===What Became of Rule, Trigger, Triggered Rule, Action and Schedule?===
 
To explain the former Rule Machine 3.0 and earlier concepts of Rule, Trigger, Triggered Rule, Actions and Schedule versus how rule automation is now accomplished, as well as how Button Controller is now incorporated, we need to first address the primary differences.
 
  
#What was a '''Trigger''' is now the basic format for all rules.
+
<big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big>
#*The user selects '''Trigger Events''' and define actions.
 
#Formerly, an '''Action''' always required a Trigger Event, but it is now possible to omit a Trigger Events and only define actions. However, such a rule '''must''' to be run by some other rule or from the Rule Machine API.
 
#The previous Schedule event, is now available as a new type of Trigger Event named '''Days of Week Schedule'''.
 
#The previous '''Button Controller''' app is fully incorporated as a new type of Trigger Event named '''Button Device'''. Once a Button Device is selected, the same user interface of the former Button Controller 3.0 is presented to define actions for any of the buttons available on the selected device. However, unlike the previous Button Controller app, these actions have full access to conditional logic and global variables.
 
  
===Change in logic for Rule-4.0 rule===
+
<big>
In any Rule, the rule itself can be thought of as an overarching '''IF-THEN-ELSE''', where if the condition was '''True''' for the '''IF''' part or the rule, then '''Actions for True''' are run, and if they are '''False''', then '''Actions for False''' are run. In '''Rule-4.0''', this same logic can now simply be done with the '''Conditional Actions''' of '''IF-THEN and ELSE''' in the '''Actions''' section of a rule. As described in the next section, '''IF-THEN''' now has the same full logical expression capability previously available, with the addition of '''AND, OR, XOR, NOT''' logical operators, and nested parenthetical sub-expressions.
+
This document is available at: http://docs2.hubitat.com/en/apps/rule-machine/rule-5-0
 
+
</big>
*'''Example:''' Using a Trigger Event such as a contact sensor '''Front Door *changed*''' to illustrate the difference, the previous Rule Machine version used this to interpret the '''Condition of Front Door *open*.''' The rule was evaluated whenever '''any''' event happened for the Front Door.  In Rule-4.0, this is explicit, whereas in previous versions the rule was '''Front Door *open*''', we now make that event the Condition of an '''IF-THEN''' action.  What were formerly '''Actions for True''', now become the Actions following '''IF-THEN''', and the former '''Actions for False''' become the actions following '''ELSE'''. Most Rules will now follow this basic format.
 
 
 
===Former Rule Truth and Cancel on Truth Change===
 
There are two subtle differences of Rule-3.0 that have now changed in Rule-4.0. The concept of a Rule Truth is gone in Rule 4.0 and is instead now explicit in the way you write the '''Actions''' for a rule. If you don't want the Actions of a Rule-4.0 rule to run unless there has been a change, which previously would have been the same as a change in Rule Truth of a 3.0 Rule, you can do that explicitly using a Private Boolean.
 
 
 
For example, If a motion sensor becomes active, a Private Boolean can be also set to '''False''', with a delay before returning to '''True'''. The can be built so the lights will not be turned on again until the full delay timer has run its course and the lights have been turned off.  When that happens, Private Boolean is set to '''True''', and the whole cycle can repeat.
 
===What about Triggered Rules?===
 
All "Rules" in Rule-4.0 are in effect '''Triggered Rules'''. They each have a '''Trigger Event''', and then '''Conditional Actions'''.  Instead of a rule with '''Actions for True''' and '''Actions for False''', they simply use conditional logic in the actions to create an equivalent '''IF-THEN-ELSE''' structure.
 
===Events===
 
Each rule has one or more '''Trigger Events''' that when triggered, cause the rule's actions to run.<p>Events are created by the devices or conditions in your system. Each device creates events appropriate to the type of device. A '''Trigger Event''' listens for specific events and when a trigger receives a selected event, it causes the defined '''Actions''' to run.</p><p>Rule Machine allows the following events in a Hubitat Elevation<sup>®</sup> system to be acted upon.  Each event results in a single test and the supported events and states that can be tested are listed below. For each event that refers to a device, one or more devices can be selected, and then the device state required for the '''Condition''' to be met can be selected.  When multiple devices are selected, the Condition/Event may apply for '''ANY''' (default) or '''ALL''' of the devices.</p><pre>Acceleration:             active / inactive
 
Battery:     value
 
Button:                    pressed / held / doubleTapped / released
 
Button Device:              select actions for any buttons of a button device
 
Certain Time:              at a certain time, including sunrise / sunset with offset
 
Cloud End Point:            hitting URL fires
 
Contact:     open / closed
 
Days of Week Schedule:      at certain time on certain days of the week
 
Dimmer level:             value
 
Door:     open, closed, opening, closing, unknown
 
Energy meter:             value
 
Garage door:             open, closed, opening, closing, unknown
 
HSM alert:                  intrusion, intrusion-delay, intrusion-home, intrusion-home-delay, intrusion-night, cancelRuleAlerts, intrusion-night-delay, 
 
                            smoke, water, rule, arming, armingHome, armingNight, cancel
 
HSM status:                armed away, armed home, armed night, delayed arming home, delayed arming night, delayed arming away, disarmed, all disarmed
 
Humidity:     value
 
Illuminance:             value
 
Local End Point:            hitting URL fires
 
Lock:     locked / unlocked
 
Mode:     any of your hub's modes
 
Motion:     active / inactive
 
Music player:             playing, paused, stopped
 
Periodic:                  allows periodic schedules for minutes, hourly, daily, weekly, monthly or yearly
 
Physical dimmer level:      value   
 
Physical switch:            on / off
 
Power meter:             value
 
Power source:              mains / battery
 
Presence:     present / not present or arrives / leaves
 
Private Boolean:     true / false
 
Rule truth:     true / false
 
Smoke detector:            clear, detected, tested
 
Switch:     on / off
 
Temperature:     value
 
Thermostat mode:     heat / cool / auto / off / emergency heat
 
Thermostat state:     heating / cooling / fan only / idle / pending heat / pending cool
 
Variable:                  value
 
Water sensor:     dry / wet
 
 
 
Note: value means compare current value to a number, to another device with an offset, or to a variable with an offset, or changed, increased, decreased</pre>
 
===Actions===
 
Actions are the portion of a rule that defines what the rule does when it is triggered to run.
 
====Actions as ordered script====
 
As you define actions, you are creating a script of actions to perform when the rule runs.  Instead of only being able to have a single action for turning on switches as in the former Rule Machine<sup>®</sup> versions, you can now have as many actions as you want for each '''Action''' type and they can be run in whatever order you want. There is no predefined order of execution for Rule Machine<sup>®</sup> actions, so you may arrange the order of actions any way you want. You can insert a new action anywhere in the list of actions, or at the end of the list.
 
====Actions can be edited====
 
The Rule-4.0 user interface provides the ability to '''Edit''' or '''Delete''' any action you have defined, giving you complete control over your list of actions.
 
[[File:RM 4 edit and delete actions.png|link=https://docs.hubitat.com/File:RM%204%20edit%20and%20delete%20actions.png|none|thumb|600x600px]]
 
 
 
====Delay per action and Delay (Pause) all actions====
 
There were three types of delays first introduced starting with Rule-3.0
 
 
 
#Each individual '''Action''' can have its own delay, which may also include a '''Cancel on Truth Change''' option.
 
#All actions can be delayed, effectively pausing the action execution for a specified amount of time.
 
#All actions can also be delayed for a period of time that is dependent on the current '''Mode''' (i.e. '''Delay Actions Per Mode''').
 
 
 
''Delay per action''
 
 
 
Each action you define can have an optional delay. These delays can be defined with hours, minutes, and seconds. Seconds can have decimal fractions, allowing millisecond resolution. In a rule, delays can have the option to be cancelled in the event of a change of rule truth. It is important to realize that the delay assigned to an individual action affects only that action, and not subsequent actions. Any subsequent action is executed immediately after the delayed action starts its delay timer, and does not wait for that delay timer to run. When the delay timer expires, the delayed action is executed (unless the delay was cancelled).
 
 
 
''Delay all actions''
 
 
 
It is also possible to delay all actions (also with optional cancel). The script of actions runs sequentially when the rule runs, with each action happening in order. Actions with delays start their timer, which can vary for each action, and '''<u>the next action in order</u>''' runs.  By using '''Delay Actions''', the entire script can be ''paused'' by a delay. This feature can also be specified on a per mode basis, so that the time the script is paused varies according to the current mode.
 
 
 
As a consequence of these new features, some of the actions from Rule 2.5 and earlier were not included in Rule-3.0 and Rule-4.0.  Specifically, those actions which incorporated a delay, or a delay with cancel, are no longer included, since in Rule-3.0 and Rule-4.0, every '''Action''' may incorporate a delay.
 
===Rule-4.0 Conditional Actions and Logical Expressions===
 
Starting with Rule-4.0, '''IF-THEN-ELSE-ENDIF''' conditional blocks can be nested. The user interface utilizes textual indentation to help guide you in keeping track of which '''IF-THEN-ELSE-ENDIF''' block you are currently adding actions to. The user is responsible for completing each level of nested '''IF-THEN''' blocks.
 
 
 
The condition of an '''IF-THEN''' or '''ELSE-IF''' Action can be a full logical expression built-up from individual conditions, and the logical operators '''AND''', '''OR''', '''XOR''', and '''NOT'''.  Parenthesized sub-expressions are also possible. This is the same user interface of the former rule portion found in Rule or Triggered Rule from Rule-3.0. An individual '''Condition''' can be created ''on the fly'' while defining a logical expression.  Every such '''Condition''' is kept in the list of available Conditions.  This list of available conditions is present in the '''Define Actions''' page. The user interface then allows Creating, Editing and Deleting conditions.  If a condition is edited, those changes will be reflected where it is used in an '''IF-THEN''' or '''ELSE-IF''' conditional action.
 
 
 
This combination of nested '''IF-THEN''' blocks and full logical expression for each '''IF-THEN''' and '''ELSE-IF''', allows creativity for rules in Rule-4.0 that is limited only by your imagination. To help you with complex logic structures, new actions are available.
 
 
 
#Exit Rule - With Exit Rule the execution of '''Actions''' for that rule will stop, irrespective of what order in the rule it exists.
 
#Pending Delays are not cancelled, and current Repetitions are not stopped by Exit Rule, but these can be managed separately if needed with '''Stop Repeating Actions''', '''Cancel Rule Timers''', and '''Cancel Delayed Actions''', where appropriate.
 
 
 
====Automatic Condition Creation====
 
When '''Event Triggers''' are defined, corresponding conditions are created for most types. Some conditions, like '''Button''', '''Certain Time''', etc, do not have a ''state'' and so have no corresponding condition. These created conditions are available in the '''Define Actions''' page for use in '''Conditional Actions''', are available for use in other Actions, and can be edited.
 
 
 
====IF-THEN-ELSE====
 
You can introduce conditional execution of actions using the following method.
 
IF (condition) THEN
 
      some actions...
 
ELSE-IF (condition) THEN
 
      some actions...
 
ELSE
 
      some actions...
 
END-IF 
 
'''IF-THEN''' and '''ELSE-IF''' both accept a logical expression as described above and '''IF-THEN-ELSE''' may also be nested. If the expression on the '''IF''' portion is True, then those actions following '''IF''' and before any '''ELSE-IF''' or '''ELSE''' statements will be carried out. If the expression is False, then those actions are skipped, and the '''ELSE''' portion or '''ELSE-IF''' are carried out. In the case of '''ELSE-IF''', its expression will be tested, and the following Actions that follow it will either run or will not run, depending on the result of the evaluation. There can be as many '''ELSE-IF''' sections as you need, and the '''ELSE-IF''' and '''ELSE''' portions are both are optional.  '''END-IF''' is also optional, and if omitted means all remaining actions are part of the preceding '''IF-THEN''', '''ELSE-IF''' or '''ELSE'''. However, for good rule structure, just a sentence should have a period at the end, it is strongly recommended that you use END-IF to complete an '''IF-THEN-ELSE''' as a regular practice.
 
===Repeat Actions===
 
Portions of, or all of the script of an '''Action''' can be repeated periodically, but you must specify the time interval for the repetition. Be careful not to make this interval too short, as you can consume your hub CPU resources by repeating too quickly. You can select any number of iterations if desired, but some method to stop the repetition is required.  When a '''Repeat Actions''' is introduced to the script, any action before '''END-REP''' will be repeated. Only the Actions between '''Repeat Actions''' and '''END-REP''' will be repeated.  Actions following '''END-REP''' will run only once the repetition has stopped. There is an optional '''Stop for a Repeat Action''' choice and if selected, then '''Stop Repeating Actions''' will stop this repetition.  Using '''Stop Rule Actions''' from either the current rule or another rule, will stop '''<u>all Repeat Actions</u>''', irrespective of which Stop selection is used.
 
Repeat Actions
 
      some actions...
 
END-REP
 
A '''Repeat Actions''', like any action, can have a condition specified.  If the condition is False, the '''Repeat Actions''' block will not be executed. If the condition becomes False during repetition, the repetition will be stopped (with the exception of when '''Repeat N Times''' is selected). This provides three features well known to computer programmers.
 
 
 
#While-loop - The '''while-loop''' runs only if the condition is true, and stops if it is false.
 
#For-loop - A '''for-loop''' runs for a fixed number of times, but if a condition exists, it will only start that iteration if the condition is true; The condition is not retested during iteration.
 
#Repeat-until loop - A repeat-until loop runs until a condition becomes true, running at least once.
 
 
 
'''Examples:'''
 
 
 
''While loop - repeat while the condition is True:''
 
IF (condition) Repeat Actions
 
      some actions...
 
END-REP
 
''For loop (repeat n times):''
 
Repeat Actions n times
 
      some actions...
 
END-REP
 
''Conditional For loop (repeat n times if condition is True):''
 
IF (condition) Repeat Actions n times
 
      some actions...
 
END-REP
 
''Repeat-Until loop:''
 
Repeat Actions with Stop selected
 
      some actions
 
    IF (condition) Stop Repeating Actions
 
END-REP
 
'''Repeat Actions''' cannot be nested.  '''END-REP''' is optional, and if omitted, all actions after '''Repeat Actions''' will be repeated.
 
 
 
*'''Note''': The '''END-REP''' does not have anything to do with the when a '''Repeated Action''' will stop repeating, it merely marks the end of the list of actions to be repeated. If you use '''Repeat These Actions''' without specifying '''N Times''' (for loop), and without a '''Condition''' (while loop), and also without a '''Conditional Stop''' or a '''Stop on Truth Change''' (for rules only), that means it should repeat <u>forever</u>, and that is probably not what you want to have happen. In that case, some other rule would need to cause the repetition to stop.
 
 
 
===Wait for Events and Wait for Condition===
 
'''Wait for Events''' pauses rule execution until some specified event occurs. Multiple events can be defined to cause the wait to end. In effect, this introduces another trigger-like capability into the Actions. There is also an event type specifically for '''Wait for Events''' named '''Elapsed Time'''. When the '''Elapsed Time''' expires, the wait will be over, irrespective of other events it may be waiting for.
 
 
 
'''Wait for Condition''' is similar to '''Wait for Events''', but instead a '''Condition''' is evaluated. If the condition is true, no wait occurs, otherwise the rule execution is paused until the condition is met. '''Wait for Events''' and '''Wait for Condition''' may both be used in a '''Simple Conditional Action'''.  Additionally, both pending '''Wait for Events''' and '''Wait for Condition''' will be cancelled each time a rule is triggered, and can be also cancelled by another rule with '''Stop Rule Actions''', or by a '''Cancel Wait''' action (which presumably would have been part of a Delayed Action).
 
===Custom Actions===
 
'''Custom Commands''' formerly available in Rule 3.0 are now replaced with '''Custom Actions'''.  A Custom Action allows you to select a device, and send any of the commands that device supports along with parameters it may take.  While the former Custom Commands need to be pre-defined and were available to all rules, a '''Custom Action''' is created within your actions and is specific to the rule where it is created.
 
===Global Variables===
 
'''Global Variables''' are now displayed on the Rule Machine main page. When creating a Global Variable, it must first be initialized. Global Variable values can also be changed in Rule Machine.
 
 
 
*'''NOTE''': Manage your global variables with some care to avoid problems. When a Global Variable is deleted, a warning is given if the variable is in use, and if deleted anyway, they will be removed from the rule for which they were in use and this removal may leave a rule with missing portions.
 
**'''Conditions''' based on variables will also be removed, which in turn may erase the rule definition.
 
**'''Actions''' that set variables will be removed and Actions with dimmers/bulbs set by variables will have missing settings.
 
**'''Global Variables''' used for comparisons will leave the comparison missing what is to be compared against.
 
 
 
====Global Variables may be used for Level/Color====
 
Global Variables can be used in actions that set dimmer or bulb levels, color temperature, or hue/saturation values.  To use a variable in this way, include it with '''%global-variable-name%'''.  In each case only a '''Number''' Global Variable is allowed, and it is not range checked
 
 
 
====Global Variables can be set by endpoint====
 
A string Global Variable can be set by an endpoint trigger.  This is an addition to the [https://community.hubitat.com/t/rule-machine-api/7104 Rule Machine API]
 
 
 
====Global Variables can be used with parameters for Custom Actions====
 
A Global Variable can be used with parameters by using '''%global-variable-name%'''.
 
 
 
====Global Variables in messages====
 
To include the value of a Global Variable in a message string (or HTTP request URL or body), you would use '''%global-variable-name%'''.
 
===Run Actions from the Rule-4.0 User Interface===
 
When you first create a new rule, you are creating a child app of the parent Rule Machine app, and therefor you must select '''Done''' on the main page to install the Rule-4.0 rule.  If you re-open the rule, its actions can be run by hitting '''Run Actions''' button. If you change the '''Trigger Events''' in any way, you must either select '''Done''' or the '''Update Rule''' button.
 
 
 
===Rule Logging===
 
You can select which types of logging you want to see in [https://docs.hubitat.com/index.php?title=Logs Logs].  This is a very good way to determine exactly what a rule is doing.
 
===List of Actions===
 
<pre>  Conditional Actions
 
  IF (conditions) THEN
 
  ELSE-IF (conditions) THEN
 
  ELSE
 
  END-IF
 
  Simple Conditional Action
 
  Control Switches, Push Buttons
 
  Turn switches on
 
  Turn switches off
 
  Toggle switches
 
  Flash switches
 
  Set switches per mode
 
  Push a button
 
  Push a button per mode
 
  Set Dimmers and Bulbs
 
  Set dimmer level
 
  Toggle dimmer level
 
  Adjust dimmer level
 
  Set dimmer level per mode
 
  Fade dimmer level over time
 
  Start raising dimmer level
 
  Start lowering dimmer level
 
  Stop changing dimmer level
 
  Set color and level
 
  Toggle color and level
 
  Set color and level per mode
 
  Set color temperature and level
 
  Toggle color temperature and level
 
  Set color temperature and level per mode
 
  Change color temperature over time
 
  Stop changing color temperature
 
  Activate Scenes, Adjust Shades or Fans
 
  Activate scenes
 
  Activate scenes per mode
 
  Open shades
 
  Close shades
 
  Set shade position
 
  Set fan speed
 
  Cycle fans
 
  Control HSM, Garage Doors, Locks or Valves
 
  Arm/Disarm Hubitat® Safety Monitor
 
  Open garage door
 
  Close garage door
 
  Lock locks
 
  Unlock locks
 
  Open valves
 
  Close valves
 
  Control Thermostats or Thermostat Scheduler
 
  Set thermostats
 
  Set Thermostat Scheduler
 
  Send, Speak, or Log a Message, Send HTTP Request
 
  Send or Speak a Message
 
  Log a Message
 
  Send HTTP Get
 
  Send HTTP Post
 
  Control Music Player, Volume, Sounds
 
  Control Music Player
 
  Set Volume
 
  Mute
 
  Unmute
 
  Sound Tone
 
  Sound Chime
 
  Control Siren
 
  Set Mode or Variables, Run Custom Action
 
  Set Mode
 
  Set Variable
 
  Run Custom Action
 
  Set Private Boolean, Run/Cancel/Pause Rules
 
  Set Private Booleans True
 
  Set Private Booleans False
 
  Run Rule Actions
 
  Cancel Rule Timers
 
  Pause Rules
 
  Resume Rules
 
  Capture/Restore, Device Refresh or Polling
 
  Capture Devices
 
  Restore Devices
 
  Refresh devices
 
  Poll devices
 
  Start Z-Wave poll on switches
 
  Stop Z-Wave poll on switches
 
  Start Z-Wave poll on dimmers
 
  Stop Z-Wave poll on dimmers
 
  Delay or Repeat Actions, Wait
 
  Delay Actions
 
  Delay Actions Per Mode
 
  Cancel Delayed Actions
 
  Repeat Actions
 
          END-REP
 
  Stop Repeating Actions
 
  Wait for Events
 
  Wait for Condition
 
  Cancel Wait
 
  Exit Rule</pre>
 
 
 
===Export, Import or Clone of Rule Machine Rules===
 
Select this option to allow export of your Rule Machine rules for import to another hub, or to clone an existing rule as a base from which to start a new rule.
 
[[File:Export Import and Clone RM rule v2.png|none|thumb|600x600px]]
 
 
 
====Export a Rule====
 
 
 
#Select a single or multiple rules for '''Export'''. You may export multiple rules to a single file, and still have the option to select which rules to later '''Import'''.[[File:Export Selected RM rules v2.png|none|thumb|600x600px]]
 
#Press the '''Download''' button to save the file to your local drive in the designated file download location for your browser. Typically this will be your '''Downloads''' folder.[[File:Export RM rule v2.png|none|thumb|600x600px]]
 
 
 
====Restore or Import a Rule====
 
You may choose to '''Restore''' a rule instead of using the '''Import''' option. This is most appropriate for instances where you want to bring a Rule Machine rule into your hub database, but you do not want to change the name or the devices used in the rule. If you instead choose to '''Import''', the process will pause to allow the rule to be renamed, and the devices used in the rule to be substituted with other devices installed on your hub before completing the import process.
 
 
 
'''Restore'''
 
 
 
#To '''Restore''', select the saved file you previously exported, then press the '''Restore''' button.[[File:Restore RM rule.png|none|thumb|600x600px]]
 
 
 
'''Import'''
 
 
 
#To '''Import''', select the saved file you previously exported and press the '''Import...''' button.[[File:Import RM rule.png|none|thumb|600x600px]]
 
#Select the rules for import.[[File:Selected RM rule for import.png|none|thumb|600x600px]]
 
#You will be prompted to replace the name and devices used in the rule if you need to.[[File:Rename and change RM devices before import.png|none|thumb|600x600px]]
 
#*'''NOTE:''' If you '''Import''' a rule to another hub without selecting replacement devices, any existing devices with those same names will be used in the imported rule. If the devices do not exist, virtual devices with those same names will automatically be created. This is very helpful when you need to replace devices of an imported rule, but do not yet have the devices available that will replace them.
 
#When ready to import, press the '''Import ['''rule name''']''' button.[[File:Rule Machine Import.png|none|thumb|600x600px]]
 
#You will receive a confirmation that the rule you selected has been imported.[[File:RM Import confirmation.png|none|thumb|600x600px]]
 
#If you changed the name, it will appear with the new name in your list of Rule Machine child apps.[[File:Show imported Rule Machine rules.png|none|thumb|600x600px]]
 
#*'''<span style="color: red;;">IMPORTANT!</span>''' - If you import rules that contain a Private Boolean, it must be manually adjusted after importing the rule. In the following example, you will see that an imported rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px]][[File:Imported rule with PB not pointing anywhere.png|none|thumb|600x600px]]
 
 
 
====Clone a Rule====
 
 
 
#To '''Clone''' a rule, select the rule from the list of available Rule Machine rules on your hub and press the '''Clone''' button.[[File:Select Rule Machine rule for clone.png|none|thumb|600x600px]][[File:Initiate Rule Machine cloning.png|none|thumb|600x600px]]
 
#You will be prompted to replace the name and devices used in the rule if you need to.[[File:Rename and change RM devices before clone.png|none|thumb|600x600px]]
 
#When ready to proceed, press the '''Clone ['''rule name''']''' button.[[File:Clone Rule Machine rule.png|none|thumb|600x600px]]
 
#You will receive a confirmation that the rule you selected has been cloned.[[File:RM rule clone confirmation.png|none|thumb|600x600px]]
 
#If you changed the name, it will appear with the new name in your list of Rule Machine child apps. If you did not change the name, the rule will be imported under the same name, but it will have the word '''clone''' added to the end.[[File:Show cloned RM rule.png|none|thumb|600x600px]]
 
#*<span style="color: red;;">'''IMPORTANT!'''</span> If you '''Clone''' rules that contain a Private Boolean, it must be manually corrected after cloning the rule. In the following example, you will see that a cloned rule will not keep the correct setting for Private Boolean after import, and therefore must be manually corrected.[[File:Cloning or imported rules containing PB.png|none|thumb|600x600px]] [[File:Cloned rule with incorrect PB setting.png|none|thumb|600x600px]]
 

Latest revision as of 20:02, 25 September 2022

We're moving! Please visit http://docs2.hubitat.com for the latest documentation.

This document is available at: http://docs2.hubitat.com/en/apps/rule-machine/rule-5-0