Difference between revisions of "Send Hub Events"

From Hubitat Documentation
Jump to: navigation, search
(Created content)
 
(Replaced content with " <big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big> <big> This document is available at: http://docs2.hubitat.com/en/apps/...")
(Tag: Replaced)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Hubitat Elevation™ provides an integration to help smooth your migration from SmartThings, or as needed for devices that only work in SmartThings when the primary hub is Hubitat™ Elevation. This makes it is possible to continue to use devices on your SmartThings hub until migration is complete. On the ''Master hub'', this is accomplished with the built-in app called [[Hub Link]], which is used to link devices on your SmartThings hub to your Hubitat Elevation™ hub. Here's how to get started:
 
  
=== Installing Send Hub Events ===
+
<big>'''We're moving!''' Please visit http://docs2.hubitat.com for the latest documentation.</big>
If you have not already installed [[Hub Link]] on the ''Master hub. See the'' [[Hub Link]] documentation for details on how to install and configure [[Hub Link]].
 
  
# Install [[Hub Link]] on your Hubitat™ Elevation hub and enter the IP address of your SmartThings hub. The IP address of the SmartThings hub can be found in the SmartThings IDE under ''My Hubs''. '''''NOTE''': The SmartThings hub and the Hubitat Elevation™ hub must be on the same Local Area Network and must share the same subnetwork.''
+
<big>
# Sign-in to the SmartThings IDE at <nowiki>https://graph.api.smartthings.com/</nowiki>
+
This document is available at: http://docs2.hubitat.com/en/apps/send-hub-events
# Choose '''My SmartApps''' at that top
+
</big>
# Choose '''My Device Handlers''' at that top, then click the '''Create New SmartApp''' button on the right
 
# Select the '''From Code''' tab and paste the code copied from this link [[https://raw.githubusercontent.com/hubitat/HubitatPublic/master/smartapps/hubitat/Send_Hub_Events.src/Send_Hub_Events.groovy Click HERE]]
 
# Select the '''Create''' button at the bottom
 
# Choose '''Publish''', and select '''For Me''' from the drop-down that appears
 
# Enter the IP address of your Hubitat Elevation™ Hub which can be found on the Settings page by selecting [[Hub Details]].
 
# Select the devices in your SmartThings system that you want to appear on your Hubitat Elevation™ hub. These will primarily be sensor devices. If you need more than one attribute of a sensor in Hubitat Elevation™, you can use the Omni Sensor selection to select devices that report multiple attributes.
 
# Save the SmartApp from the SmartThings mobile app, and Send Hub Events will send your device selections to your Hubitat Elevation™ hub. The Hub Link app will create virtual devices for each SmartThings device and label them with the same name as found on SmartThings. The name shown on your Hubitat Elevation™ hub may be edited if you wish, but '''don't edit the Device Network Id,''' since this is used by the two systems to identify devices.
 
# Events for the devices you selected on SmartThings will now happen for shadow virtual devices on your Hubitat Elevation™ hub. These special virtual devices can by used in Rule Machine<sup>®</sup> or other automations on your Hubitat Elevation™ ''Master hub''.
 
 
 
=== About Send Hub Events ===
 
This is a one-way integration. Events that happen on SmartThings are sent to Hubitat Elevation™. Events that happen in Hubitat Elevaton™ '''are not sent''' to SmartThings. If you try to operate the special virtual shadow devices on your Hubitat Elevation™ hub, no corresponding action will occur on your SmartThings hub.
 
 
 
If you remove one of the selected devices from SmartThings, the shadow virtual device on your Hubitat Elevation™ hub will still exist, but will no longer function. You will have to remove it manually from your Hubitat Elevation™ hub. Similarly, if you de-select one of the selected devices on your SmartThings hub, the shadow virtual device on you Hubitat Elevation™ hub will have to be manually removed.
 
 
 
If you remove a shadow virtual device from Hubitat Elevation™, that has no effect on SmartThings and you should therefore de-select from the Send Hub Events SmartApp. If you remove [[Hub Link]] from your Hubitat Elevation™ hub, it will attempt to remove all of the shadow virtual devices, but this may fail if any of those devices are still in use by apps on your Hubitat Elevation™ hub.
 

Latest revision as of 20:02, 25 September 2022

We're moving! Please visit http://docs2.hubitat.com for the latest documentation.

This document is available at: http://docs2.hubitat.com/en/apps/send-hub-events